1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * linux/arch/x86_64/entry.S 4 * 5 * Copyright (C) 1991, 1992 Linus Torvalds 6 * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs 7 * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> 8 * 9 * entry.S contains the system-call and fault low-level handling routines. 10 * 11 * Some of this is documented in Documentation/x86/entry_64.rst 12 * 13 * A note on terminology: 14 * - iret frame: Architecture defined interrupt frame from SS to RIP 15 * at the top of the kernel process stack. 16 * 17 * Some macro usage: 18 * - ENTRY/END: Define functions in the symbol table. 19 * - TRACE_IRQ_*: Trace hardirq state for lock debugging. 20 * - idtentry: Define exception entry points. 21 */ 22#include <linux/linkage.h> 23#include <asm/segment.h> 24#include <asm/cache.h> 25#include <asm/errno.h> 26#include <asm/asm-offsets.h> 27#include <asm/msr.h> 28#include <asm/unistd.h> 29#include <asm/thread_info.h> 30#include <asm/hw_irq.h> 31#include <asm/page_types.h> 32#include <asm/irqflags.h> 33#include <asm/paravirt.h> 34#include <asm/percpu.h> 35#include <asm/asm.h> 36#include <asm/smap.h> 37#include <asm/pgtable_types.h> 38#include <asm/export.h> 39#include <asm/frame.h> 40#include <asm/nospec-branch.h> 41#include <linux/err.h> 42 43#include "calling.h" 44 45.code64 46.section .entry.text, "ax" 47 48#ifdef CONFIG_PARAVIRT 49ENTRY(native_usergs_sysret64) 50 UNWIND_HINT_EMPTY 51 swapgs 52 sysretq 53END(native_usergs_sysret64) 54#endif /* CONFIG_PARAVIRT */ 55 56.macro TRACE_IRQS_FLAGS flags:req 57#ifdef CONFIG_TRACE_IRQFLAGS 58 btl $9, \flags /* interrupts off? */ 59 jnc 1f 60 TRACE_IRQS_ON 611: 62#endif 63.endm 64 65.macro TRACE_IRQS_IRETQ 66 TRACE_IRQS_FLAGS EFLAGS(%rsp) 67.endm 68 69/* 70 * When dynamic function tracer is enabled it will add a breakpoint 71 * to all locations that it is about to modify, sync CPUs, update 72 * all the code, sync CPUs, then remove the breakpoints. In this time 73 * if lockdep is enabled, it might jump back into the debug handler 74 * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF). 75 * 76 * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to 77 * make sure the stack pointer does not get reset back to the top 78 * of the debug stack, and instead just reuses the current stack. 79 */ 80#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS) 81 82.macro TRACE_IRQS_OFF_DEBUG 83 call debug_stack_set_zero 84 TRACE_IRQS_OFF 85 call debug_stack_reset 86.endm 87 88.macro TRACE_IRQS_ON_DEBUG 89 call debug_stack_set_zero 90 TRACE_IRQS_ON 91 call debug_stack_reset 92.endm 93 94.macro TRACE_IRQS_IRETQ_DEBUG 95 btl $9, EFLAGS(%rsp) /* interrupts off? */ 96 jnc 1f 97 TRACE_IRQS_ON_DEBUG 981: 99.endm 100 101#else 102# define TRACE_IRQS_OFF_DEBUG TRACE_IRQS_OFF 103# define TRACE_IRQS_ON_DEBUG TRACE_IRQS_ON 104# define TRACE_IRQS_IRETQ_DEBUG TRACE_IRQS_IRETQ 105#endif 106 107/* 108 * 64-bit SYSCALL instruction entry. Up to 6 arguments in registers. 109 * 110 * This is the only entry point used for 64-bit system calls. The 111 * hardware interface is reasonably well designed and the register to 112 * argument mapping Linux uses fits well with the registers that are 113 * available when SYSCALL is used. 114 * 115 * SYSCALL instructions can be found inlined in libc implementations as 116 * well as some other programs and libraries. There are also a handful 117 * of SYSCALL instructions in the vDSO used, for example, as a 118 * clock_gettimeofday fallback. 119 * 120 * 64-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11, 121 * then loads new ss, cs, and rip from previously programmed MSRs. 122 * rflags gets masked by a value from another MSR (so CLD and CLAC 123 * are not needed). SYSCALL does not save anything on the stack 124 * and does not change rsp. 125 * 126 * Registers on entry: 127 * rax system call number 128 * rcx return address 129 * r11 saved rflags (note: r11 is callee-clobbered register in C ABI) 130 * rdi arg0 131 * rsi arg1 132 * rdx arg2 133 * r10 arg3 (needs to be moved to rcx to conform to C ABI) 134 * r8 arg4 135 * r9 arg5 136 * (note: r12-r15, rbp, rbx are callee-preserved in C ABI) 137 * 138 * Only called from user space. 139 * 140 * When user can change pt_regs->foo always force IRET. That is because 141 * it deals with uncanonical addresses better. SYSRET has trouble 142 * with them due to bugs in both AMD and Intel CPUs. 143 */ 144 145ENTRY(entry_SYSCALL_64) 146 UNWIND_HINT_EMPTY 147 /* 148 * Interrupts are off on entry. 149 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, 150 * it is too small to ever cause noticeable irq latency. 151 */ 152 153 swapgs 154 /* tss.sp2 is scratch space. */ 155 movq %rsp, PER_CPU_VAR(cpu_tss_rw + TSS_sp2) 156 SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp 157 movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp 158 159 /* Construct struct pt_regs on stack */ 160 pushq $__USER_DS /* pt_regs->ss */ 161 pushq PER_CPU_VAR(cpu_tss_rw + TSS_sp2) /* pt_regs->sp */ 162 pushq %r11 /* pt_regs->flags */ 163 pushq $__USER_CS /* pt_regs->cs */ 164 pushq %rcx /* pt_regs->ip */ 165GLOBAL(entry_SYSCALL_64_after_hwframe) 166 pushq %rax /* pt_regs->orig_ax */ 167 168 PUSH_AND_CLEAR_REGS rax=$-ENOSYS 169 170 TRACE_IRQS_OFF 171 172 /* IRQs are off. */ 173 movq %rax, %rdi 174 movq %rsp, %rsi 175 call do_syscall_64 /* returns with IRQs disabled */ 176 177 TRACE_IRQS_IRETQ /* we're about to change IF */ 178 179 /* 180 * Try to use SYSRET instead of IRET if we're returning to 181 * a completely clean 64-bit userspace context. If we're not, 182 * go to the slow exit path. 183 */ 184 movq RCX(%rsp), %rcx 185 movq RIP(%rsp), %r11 186 187 cmpq %rcx, %r11 /* SYSRET requires RCX == RIP */ 188 jne swapgs_restore_regs_and_return_to_usermode 189 190 /* 191 * On Intel CPUs, SYSRET with non-canonical RCX/RIP will #GP 192 * in kernel space. This essentially lets the user take over 193 * the kernel, since userspace controls RSP. 194 * 195 * If width of "canonical tail" ever becomes variable, this will need 196 * to be updated to remain correct on both old and new CPUs. 197 * 198 * Change top bits to match most significant bit (47th or 56th bit 199 * depending on paging mode) in the address. 200 */ 201#ifdef CONFIG_X86_5LEVEL 202 ALTERNATIVE "shl $(64 - 48), %rcx; sar $(64 - 48), %rcx", \ 203 "shl $(64 - 57), %rcx; sar $(64 - 57), %rcx", X86_FEATURE_LA57 204#else 205 shl $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx 206 sar $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx 207#endif 208 209 /* If this changed %rcx, it was not canonical */ 210 cmpq %rcx, %r11 211 jne swapgs_restore_regs_and_return_to_usermode 212 213 cmpq $__USER_CS, CS(%rsp) /* CS must match SYSRET */ 214 jne swapgs_restore_regs_and_return_to_usermode 215 216 movq R11(%rsp), %r11 217 cmpq %r11, EFLAGS(%rsp) /* R11 == RFLAGS */ 218 jne swapgs_restore_regs_and_return_to_usermode 219 220 /* 221 * SYSCALL clears RF when it saves RFLAGS in R11 and SYSRET cannot 222 * restore RF properly. If the slowpath sets it for whatever reason, we 223 * need to restore it correctly. 224 * 225 * SYSRET can restore TF, but unlike IRET, restoring TF results in a 226 * trap from userspace immediately after SYSRET. This would cause an 227 * infinite loop whenever #DB happens with register state that satisfies 228 * the opportunistic SYSRET conditions. For example, single-stepping 229 * this user code: 230 * 231 * movq $stuck_here, %rcx 232 * pushfq 233 * popq %r11 234 * stuck_here: 235 * 236 * would never get past 'stuck_here'. 237 */ 238 testq $(X86_EFLAGS_RF|X86_EFLAGS_TF), %r11 239 jnz swapgs_restore_regs_and_return_to_usermode 240 241 /* nothing to check for RSP */ 242 243 cmpq $__USER_DS, SS(%rsp) /* SS must match SYSRET */ 244 jne swapgs_restore_regs_and_return_to_usermode 245 246 /* 247 * We win! This label is here just for ease of understanding 248 * perf profiles. Nothing jumps here. 249 */ 250syscall_return_via_sysret: 251 /* rcx and r11 are already restored (see code above) */ 252 UNWIND_HINT_EMPTY 253 POP_REGS pop_rdi=0 skip_r11rcx=1 254 255 /* 256 * Now all regs are restored except RSP and RDI. 257 * Save old stack pointer and switch to trampoline stack. 258 */ 259 movq %rsp, %rdi 260 movq PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp 261 262 pushq RSP-RDI(%rdi) /* RSP */ 263 pushq (%rdi) /* RDI */ 264 265 /* 266 * We are on the trampoline stack. All regs except RDI are live. 267 * We can do future final exit work right here. 268 */ 269 STACKLEAK_ERASE_NOCLOBBER 270 271 SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi 272 273 popq %rdi 274 popq %rsp 275 USERGS_SYSRET64 276END(entry_SYSCALL_64) 277 278/* 279 * %rdi: prev task 280 * %rsi: next task 281 */ 282ENTRY(__switch_to_asm) 283 UNWIND_HINT_FUNC 284 /* 285 * Save callee-saved registers 286 * This must match the order in inactive_task_frame 287 */ 288 pushq %rbp 289 pushq %rbx 290 pushq %r12 291 pushq %r13 292 pushq %r14 293 pushq %r15 294 295 /* switch stack */ 296 movq %rsp, TASK_threadsp(%rdi) 297 movq TASK_threadsp(%rsi), %rsp 298 299#ifdef CONFIG_STACKPROTECTOR 300 movq TASK_stack_canary(%rsi), %rbx 301 movq %rbx, PER_CPU_VAR(fixed_percpu_data) + stack_canary_offset 302#endif 303 304#ifdef CONFIG_RETPOLINE 305 /* 306 * When switching from a shallower to a deeper call stack 307 * the RSB may either underflow or use entries populated 308 * with userspace addresses. On CPUs where those concerns 309 * exist, overwrite the RSB with entries which capture 310 * speculative execution to prevent attack. 311 */ 312 FILL_RETURN_BUFFER %r12, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW 313#endif 314 315 /* restore callee-saved registers */ 316 popq %r15 317 popq %r14 318 popq %r13 319 popq %r12 320 popq %rbx 321 popq %rbp 322 323 jmp __switch_to 324END(__switch_to_asm) 325 326/* 327 * A newly forked process directly context switches into this address. 328 * 329 * rax: prev task we switched from 330 * rbx: kernel thread func (NULL for user thread) 331 * r12: kernel thread arg 332 */ 333ENTRY(ret_from_fork) 334 UNWIND_HINT_EMPTY 335 movq %rax, %rdi 336 call schedule_tail /* rdi: 'prev' task parameter */ 337 338 testq %rbx, %rbx /* from kernel_thread? */ 339 jnz 1f /* kernel threads are uncommon */ 340 3412: 342 UNWIND_HINT_REGS 343 movq %rsp, %rdi 344 call syscall_return_slowpath /* returns with IRQs disabled */ 345 TRACE_IRQS_ON /* user mode is traced as IRQS on */ 346 jmp swapgs_restore_regs_and_return_to_usermode 347 3481: 349 /* kernel thread */ 350 UNWIND_HINT_EMPTY 351 movq %r12, %rdi 352 CALL_NOSPEC %rbx 353 /* 354 * A kernel thread is allowed to return here after successfully 355 * calling do_execve(). Exit to userspace to complete the execve() 356 * syscall. 357 */ 358 movq $0, RAX(%rsp) 359 jmp 2b 360END(ret_from_fork) 361 362/* 363 * Build the entry stubs with some assembler magic. 364 * We pack 1 stub into every 8-byte block. 365 */ 366 .align 8 367ENTRY(irq_entries_start) 368 vector=FIRST_EXTERNAL_VECTOR 369 .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) 370 UNWIND_HINT_IRET_REGS 371 pushq $(~vector+0x80) /* Note: always in signed byte range */ 372 jmp common_interrupt 373 .align 8 374 vector=vector+1 375 .endr 376END(irq_entries_start) 377 378 .align 8 379ENTRY(spurious_entries_start) 380 vector=FIRST_SYSTEM_VECTOR 381 .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR) 382 UNWIND_HINT_IRET_REGS 383 pushq $(~vector+0x80) /* Note: always in signed byte range */ 384 jmp common_spurious 385 .align 8 386 vector=vector+1 387 .endr 388END(spurious_entries_start) 389 390.macro DEBUG_ENTRY_ASSERT_IRQS_OFF 391#ifdef CONFIG_DEBUG_ENTRY 392 pushq %rax 393 SAVE_FLAGS(CLBR_RAX) 394 testl $X86_EFLAGS_IF, %eax 395 jz .Lokay_\@ 396 ud2 397.Lokay_\@: 398 popq %rax 399#endif 400.endm 401 402/* 403 * Enters the IRQ stack if we're not already using it. NMI-safe. Clobbers 404 * flags and puts old RSP into old_rsp, and leaves all other GPRs alone. 405 * Requires kernel GSBASE. 406 * 407 * The invariant is that, if irq_count != -1, then the IRQ stack is in use. 408 */ 409.macro ENTER_IRQ_STACK regs=1 old_rsp save_ret=0 410 DEBUG_ENTRY_ASSERT_IRQS_OFF 411 412 .if \save_ret 413 /* 414 * If save_ret is set, the original stack contains one additional 415 * entry -- the return address. Therefore, move the address one 416 * entry below %rsp to \old_rsp. 417 */ 418 leaq 8(%rsp), \old_rsp 419 .else 420 movq %rsp, \old_rsp 421 .endif 422 423 .if \regs 424 UNWIND_HINT_REGS base=\old_rsp 425 .endif 426 427 incl PER_CPU_VAR(irq_count) 428 jnz .Lirq_stack_push_old_rsp_\@ 429 430 /* 431 * Right now, if we just incremented irq_count to zero, we've 432 * claimed the IRQ stack but we haven't switched to it yet. 433 * 434 * If anything is added that can interrupt us here without using IST, 435 * it must be *extremely* careful to limit its stack usage. This 436 * could include kprobes and a hypothetical future IST-less #DB 437 * handler. 438 * 439 * The OOPS unwinder relies on the word at the top of the IRQ 440 * stack linking back to the previous RSP for the entire time we're 441 * on the IRQ stack. For this to work reliably, we need to write 442 * it before we actually move ourselves to the IRQ stack. 443 */ 444 445 movq \old_rsp, PER_CPU_VAR(irq_stack_backing_store + IRQ_STACK_SIZE - 8) 446 movq PER_CPU_VAR(hardirq_stack_ptr), %rsp 447 448#ifdef CONFIG_DEBUG_ENTRY 449 /* 450 * If the first movq above becomes wrong due to IRQ stack layout 451 * changes, the only way we'll notice is if we try to unwind right 452 * here. Assert that we set up the stack right to catch this type 453 * of bug quickly. 454 */ 455 cmpq -8(%rsp), \old_rsp 456 je .Lirq_stack_okay\@ 457 ud2 458 .Lirq_stack_okay\@: 459#endif 460 461.Lirq_stack_push_old_rsp_\@: 462 pushq \old_rsp 463 464 .if \regs 465 UNWIND_HINT_REGS indirect=1 466 .endif 467 468 .if \save_ret 469 /* 470 * Push the return address to the stack. This return address can 471 * be found at the "real" original RSP, which was offset by 8 at 472 * the beginning of this macro. 473 */ 474 pushq -8(\old_rsp) 475 .endif 476.endm 477 478/* 479 * Undoes ENTER_IRQ_STACK. 480 */ 481.macro LEAVE_IRQ_STACK regs=1 482 DEBUG_ENTRY_ASSERT_IRQS_OFF 483 /* We need to be off the IRQ stack before decrementing irq_count. */ 484 popq %rsp 485 486 .if \regs 487 UNWIND_HINT_REGS 488 .endif 489 490 /* 491 * As in ENTER_IRQ_STACK, irq_count == 0, we are still claiming 492 * the irq stack but we're not on it. 493 */ 494 495 decl PER_CPU_VAR(irq_count) 496.endm 497 498/* 499 * Interrupt entry helper function. 500 * 501 * Entry runs with interrupts off. Stack layout at entry: 502 * +----------------------------------------------------+ 503 * | regs->ss | 504 * | regs->rsp | 505 * | regs->eflags | 506 * | regs->cs | 507 * | regs->ip | 508 * +----------------------------------------------------+ 509 * | regs->orig_ax = ~(interrupt number) | 510 * +----------------------------------------------------+ 511 * | return address | 512 * +----------------------------------------------------+ 513 */ 514ENTRY(interrupt_entry) 515 UNWIND_HINT_FUNC 516 ASM_CLAC 517 cld 518 519 testb $3, CS-ORIG_RAX+8(%rsp) 520 jz 1f 521 SWAPGS 522 FENCE_SWAPGS_USER_ENTRY 523 /* 524 * Switch to the thread stack. The IRET frame and orig_ax are 525 * on the stack, as well as the return address. RDI..R12 are 526 * not (yet) on the stack and space has not (yet) been 527 * allocated for them. 528 */ 529 pushq %rdi 530 531 /* Need to switch before accessing the thread stack. */ 532 SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi 533 movq %rsp, %rdi 534 movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp 535 536 /* 537 * We have RDI, return address, and orig_ax on the stack on 538 * top of the IRET frame. That means offset=24 539 */ 540 UNWIND_HINT_IRET_REGS base=%rdi offset=24 541 542 pushq 7*8(%rdi) /* regs->ss */ 543 pushq 6*8(%rdi) /* regs->rsp */ 544 pushq 5*8(%rdi) /* regs->eflags */ 545 pushq 4*8(%rdi) /* regs->cs */ 546 pushq 3*8(%rdi) /* regs->ip */ 547 pushq 2*8(%rdi) /* regs->orig_ax */ 548 pushq 8(%rdi) /* return address */ 549 UNWIND_HINT_FUNC 550 551 movq (%rdi), %rdi 552 jmp 2f 5531: 554 FENCE_SWAPGS_KERNEL_ENTRY 5552: 556 PUSH_AND_CLEAR_REGS save_ret=1 557 ENCODE_FRAME_POINTER 8 558 559 testb $3, CS+8(%rsp) 560 jz 1f 561 562 /* 563 * IRQ from user mode. 564 * 565 * We need to tell lockdep that IRQs are off. We can't do this until 566 * we fix gsbase, and we should do it before enter_from_user_mode 567 * (which can take locks). Since TRACE_IRQS_OFF is idempotent, 568 * the simplest way to handle it is to just call it twice if 569 * we enter from user mode. There's no reason to optimize this since 570 * TRACE_IRQS_OFF is a no-op if lockdep is off. 571 */ 572 TRACE_IRQS_OFF 573 574 CALL_enter_from_user_mode 575 5761: 577 ENTER_IRQ_STACK old_rsp=%rdi save_ret=1 578 /* We entered an interrupt context - irqs are off: */ 579 TRACE_IRQS_OFF 580 581 ret 582END(interrupt_entry) 583_ASM_NOKPROBE(interrupt_entry) 584 585 586/* Interrupt entry/exit. */ 587 588/* 589 * The interrupt stubs push (~vector+0x80) onto the stack and 590 * then jump to common_spurious/interrupt. 591 */ 592common_spurious: 593 addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */ 594 call interrupt_entry 595 UNWIND_HINT_REGS indirect=1 596 call smp_spurious_interrupt /* rdi points to pt_regs */ 597 jmp ret_from_intr 598END(common_spurious) 599_ASM_NOKPROBE(common_spurious) 600 601/* common_interrupt is a hotpath. Align it */ 602 .p2align CONFIG_X86_L1_CACHE_SHIFT 603common_interrupt: 604 addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */ 605 call interrupt_entry 606 UNWIND_HINT_REGS indirect=1 607 call do_IRQ /* rdi points to pt_regs */ 608 /* 0(%rsp): old RSP */ 609ret_from_intr: 610 DISABLE_INTERRUPTS(CLBR_ANY) 611 TRACE_IRQS_OFF 612 613 LEAVE_IRQ_STACK 614 615 testb $3, CS(%rsp) 616 jz retint_kernel 617 618 /* Interrupt came from user space */ 619GLOBAL(retint_user) 620 mov %rsp,%rdi 621 call prepare_exit_to_usermode 622 TRACE_IRQS_IRETQ 623 624GLOBAL(swapgs_restore_regs_and_return_to_usermode) 625#ifdef CONFIG_DEBUG_ENTRY 626 /* Assert that pt_regs indicates user mode. */ 627 testb $3, CS(%rsp) 628 jnz 1f 629 ud2 6301: 631#endif 632 POP_REGS pop_rdi=0 633 634 /* 635 * The stack is now user RDI, orig_ax, RIP, CS, EFLAGS, RSP, SS. 636 * Save old stack pointer and switch to trampoline stack. 637 */ 638 movq %rsp, %rdi 639 movq PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp 640 641 /* Copy the IRET frame to the trampoline stack. */ 642 pushq 6*8(%rdi) /* SS */ 643 pushq 5*8(%rdi) /* RSP */ 644 pushq 4*8(%rdi) /* EFLAGS */ 645 pushq 3*8(%rdi) /* CS */ 646 pushq 2*8(%rdi) /* RIP */ 647 648 /* Push user RDI on the trampoline stack. */ 649 pushq (%rdi) 650 651 /* 652 * We are on the trampoline stack. All regs except RDI are live. 653 * We can do future final exit work right here. 654 */ 655 STACKLEAK_ERASE_NOCLOBBER 656 657 SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi 658 659 /* Restore RDI. */ 660 popq %rdi 661 SWAPGS 662 INTERRUPT_RETURN 663 664 665/* Returning to kernel space */ 666retint_kernel: 667#ifdef CONFIG_PREEMPTION 668 /* Interrupts are off */ 669 /* Check if we need preemption */ 670 btl $9, EFLAGS(%rsp) /* were interrupts off? */ 671 jnc 1f 672 cmpl $0, PER_CPU_VAR(__preempt_count) 673 jnz 1f 674 call preempt_schedule_irq 6751: 676#endif 677 /* 678 * The iretq could re-enable interrupts: 679 */ 680 TRACE_IRQS_IRETQ 681 682GLOBAL(restore_regs_and_return_to_kernel) 683#ifdef CONFIG_DEBUG_ENTRY 684 /* Assert that pt_regs indicates kernel mode. */ 685 testb $3, CS(%rsp) 686 jz 1f 687 ud2 6881: 689#endif 690 POP_REGS 691 addq $8, %rsp /* skip regs->orig_ax */ 692 /* 693 * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization 694 * when returning from IPI handler. 695 */ 696 INTERRUPT_RETURN 697 698ENTRY(native_iret) 699 UNWIND_HINT_IRET_REGS 700 /* 701 * Are we returning to a stack segment from the LDT? Note: in 702 * 64-bit mode SS:RSP on the exception stack is always valid. 703 */ 704#ifdef CONFIG_X86_ESPFIX64 705 testb $4, (SS-RIP)(%rsp) 706 jnz native_irq_return_ldt 707#endif 708 709.global native_irq_return_iret 710native_irq_return_iret: 711 /* 712 * This may fault. Non-paranoid faults on return to userspace are 713 * handled by fixup_bad_iret. These include #SS, #GP, and #NP. 714 * Double-faults due to espfix64 are handled in do_double_fault. 715 * Other faults here are fatal. 716 */ 717 iretq 718 719#ifdef CONFIG_X86_ESPFIX64 720native_irq_return_ldt: 721 /* 722 * We are running with user GSBASE. All GPRs contain their user 723 * values. We have a percpu ESPFIX stack that is eight slots 724 * long (see ESPFIX_STACK_SIZE). espfix_waddr points to the bottom 725 * of the ESPFIX stack. 726 * 727 * We clobber RAX and RDI in this code. We stash RDI on the 728 * normal stack and RAX on the ESPFIX stack. 729 * 730 * The ESPFIX stack layout we set up looks like this: 731 * 732 * --- top of ESPFIX stack --- 733 * SS 734 * RSP 735 * RFLAGS 736 * CS 737 * RIP <-- RSP points here when we're done 738 * RAX <-- espfix_waddr points here 739 * --- bottom of ESPFIX stack --- 740 */ 741 742 pushq %rdi /* Stash user RDI */ 743 SWAPGS /* to kernel GS */ 744 SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi /* to kernel CR3 */ 745 746 movq PER_CPU_VAR(espfix_waddr), %rdi 747 movq %rax, (0*8)(%rdi) /* user RAX */ 748 movq (1*8)(%rsp), %rax /* user RIP */ 749 movq %rax, (1*8)(%rdi) 750 movq (2*8)(%rsp), %rax /* user CS */ 751 movq %rax, (2*8)(%rdi) 752 movq (3*8)(%rsp), %rax /* user RFLAGS */ 753 movq %rax, (3*8)(%rdi) 754 movq (5*8)(%rsp), %rax /* user SS */ 755 movq %rax, (5*8)(%rdi) 756 movq (4*8)(%rsp), %rax /* user RSP */ 757 movq %rax, (4*8)(%rdi) 758 /* Now RAX == RSP. */ 759 760 andl $0xffff0000, %eax /* RAX = (RSP & 0xffff0000) */ 761 762 /* 763 * espfix_stack[31:16] == 0. The page tables are set up such that 764 * (espfix_stack | (X & 0xffff0000)) points to a read-only alias of 765 * espfix_waddr for any X. That is, there are 65536 RO aliases of 766 * the same page. Set up RSP so that RSP[31:16] contains the 767 * respective 16 bits of the /userspace/ RSP and RSP nonetheless 768 * still points to an RO alias of the ESPFIX stack. 769 */ 770 orq PER_CPU_VAR(espfix_stack), %rax 771 772 SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi 773 SWAPGS /* to user GS */ 774 popq %rdi /* Restore user RDI */ 775 776 movq %rax, %rsp 777 UNWIND_HINT_IRET_REGS offset=8 778 779 /* 780 * At this point, we cannot write to the stack any more, but we can 781 * still read. 782 */ 783 popq %rax /* Restore user RAX */ 784 785 /* 786 * RSP now points to an ordinary IRET frame, except that the page 787 * is read-only and RSP[31:16] are preloaded with the userspace 788 * values. We can now IRET back to userspace. 789 */ 790 jmp native_irq_return_iret 791#endif 792END(common_interrupt) 793_ASM_NOKPROBE(common_interrupt) 794 795/* 796 * APIC interrupts. 797 */ 798.macro apicinterrupt3 num sym do_sym 799ENTRY(\sym) 800 UNWIND_HINT_IRET_REGS 801 pushq $~(\num) 802.Lcommon_\sym: 803 call interrupt_entry 804 UNWIND_HINT_REGS indirect=1 805 call \do_sym /* rdi points to pt_regs */ 806 jmp ret_from_intr 807END(\sym) 808_ASM_NOKPROBE(\sym) 809.endm 810 811/* Make sure APIC interrupt handlers end up in the irqentry section: */ 812#define PUSH_SECTION_IRQENTRY .pushsection .irqentry.text, "ax" 813#define POP_SECTION_IRQENTRY .popsection 814 815.macro apicinterrupt num sym do_sym 816PUSH_SECTION_IRQENTRY 817apicinterrupt3 \num \sym \do_sym 818POP_SECTION_IRQENTRY 819.endm 820 821#ifdef CONFIG_SMP 822apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt 823apicinterrupt3 REBOOT_VECTOR reboot_interrupt smp_reboot_interrupt 824#endif 825 826#ifdef CONFIG_X86_UV 827apicinterrupt3 UV_BAU_MESSAGE uv_bau_message_intr1 uv_bau_message_interrupt 828#endif 829 830apicinterrupt LOCAL_TIMER_VECTOR apic_timer_interrupt smp_apic_timer_interrupt 831apicinterrupt X86_PLATFORM_IPI_VECTOR x86_platform_ipi smp_x86_platform_ipi 832 833#ifdef CONFIG_HAVE_KVM 834apicinterrupt3 POSTED_INTR_VECTOR kvm_posted_intr_ipi smp_kvm_posted_intr_ipi 835apicinterrupt3 POSTED_INTR_WAKEUP_VECTOR kvm_posted_intr_wakeup_ipi smp_kvm_posted_intr_wakeup_ipi 836apicinterrupt3 POSTED_INTR_NESTED_VECTOR kvm_posted_intr_nested_ipi smp_kvm_posted_intr_nested_ipi 837#endif 838 839#ifdef CONFIG_X86_MCE_THRESHOLD 840apicinterrupt THRESHOLD_APIC_VECTOR threshold_interrupt smp_threshold_interrupt 841#endif 842 843#ifdef CONFIG_X86_MCE_AMD 844apicinterrupt DEFERRED_ERROR_VECTOR deferred_error_interrupt smp_deferred_error_interrupt 845#endif 846 847#ifdef CONFIG_X86_THERMAL_VECTOR 848apicinterrupt THERMAL_APIC_VECTOR thermal_interrupt smp_thermal_interrupt 849#endif 850 851#ifdef CONFIG_SMP 852apicinterrupt CALL_FUNCTION_SINGLE_VECTOR call_function_single_interrupt smp_call_function_single_interrupt 853apicinterrupt CALL_FUNCTION_VECTOR call_function_interrupt smp_call_function_interrupt 854apicinterrupt RESCHEDULE_VECTOR reschedule_interrupt smp_reschedule_interrupt 855#endif 856 857apicinterrupt ERROR_APIC_VECTOR error_interrupt smp_error_interrupt 858apicinterrupt SPURIOUS_APIC_VECTOR spurious_interrupt smp_spurious_interrupt 859 860#ifdef CONFIG_IRQ_WORK 861apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt 862#endif 863 864/* 865 * Exception entry points. 866 */ 867#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + (x) * 8) 868 869.macro idtentry_part do_sym, has_error_code:req, read_cr2:req, paranoid:req, shift_ist=-1, ist_offset=0 870 871 .if \paranoid 872 call paranoid_entry 873 /* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */ 874 .else 875 call error_entry 876 .endif 877 UNWIND_HINT_REGS 878 879 .if \read_cr2 880 /* 881 * Store CR2 early so subsequent faults cannot clobber it. Use R12 as 882 * intermediate storage as RDX can be clobbered in enter_from_user_mode(). 883 * GET_CR2_INTO can clobber RAX. 884 */ 885 GET_CR2_INTO(%r12); 886 .endif 887 888 .if \shift_ist != -1 889 TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */ 890 .else 891 TRACE_IRQS_OFF 892 .endif 893 894 .if \paranoid == 0 895 testb $3, CS(%rsp) 896 jz .Lfrom_kernel_no_context_tracking_\@ 897 CALL_enter_from_user_mode 898.Lfrom_kernel_no_context_tracking_\@: 899 .endif 900 901 movq %rsp, %rdi /* pt_regs pointer */ 902 903 .if \has_error_code 904 movq ORIG_RAX(%rsp), %rsi /* get error code */ 905 movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */ 906 .else 907 xorl %esi, %esi /* no error code */ 908 .endif 909 910 .if \shift_ist != -1 911 subq $\ist_offset, CPU_TSS_IST(\shift_ist) 912 .endif 913 914 .if \read_cr2 915 movq %r12, %rdx /* Move CR2 into 3rd argument */ 916 .endif 917 918 call \do_sym 919 920 .if \shift_ist != -1 921 addq $\ist_offset, CPU_TSS_IST(\shift_ist) 922 .endif 923 924 .if \paranoid 925 /* this procedure expect "no swapgs" flag in ebx */ 926 jmp paranoid_exit 927 .else 928 jmp error_exit 929 .endif 930 931.endm 932 933/** 934 * idtentry - Generate an IDT entry stub 935 * @sym: Name of the generated entry point 936 * @do_sym: C function to be called 937 * @has_error_code: True if this IDT vector has an error code on the stack 938 * @paranoid: non-zero means that this vector may be invoked from 939 * kernel mode with user GSBASE and/or user CR3. 940 * 2 is special -- see below. 941 * @shift_ist: Set to an IST index if entries from kernel mode should 942 * decrement the IST stack so that nested entries get a 943 * fresh stack. (This is for #DB, which has a nasty habit 944 * of recursing.) 945 * @create_gap: create a 6-word stack gap when coming from kernel mode. 946 * @read_cr2: load CR2 into the 3rd argument; done before calling any C code 947 * 948 * idtentry generates an IDT stub that sets up a usable kernel context, 949 * creates struct pt_regs, and calls @do_sym. The stub has the following 950 * special behaviors: 951 * 952 * On an entry from user mode, the stub switches from the trampoline or 953 * IST stack to the normal thread stack. On an exit to user mode, the 954 * normal exit-to-usermode path is invoked. 955 * 956 * On an exit to kernel mode, if @paranoid == 0, we check for preemption, 957 * whereas we omit the preemption check if @paranoid != 0. This is purely 958 * because the implementation is simpler this way. The kernel only needs 959 * to check for asynchronous kernel preemption when IRQ handlers return. 960 * 961 * If @paranoid == 0, then the stub will handle IRET faults by pretending 962 * that the fault came from user mode. It will handle gs_change faults by 963 * pretending that the fault happened with kernel GSBASE. Since this handling 964 * is omitted for @paranoid != 0, the #GP, #SS, and #NP stubs must have 965 * @paranoid == 0. This special handling will do the wrong thing for 966 * espfix-induced #DF on IRET, so #DF must not use @paranoid == 0. 967 * 968 * @paranoid == 2 is special: the stub will never switch stacks. This is for 969 * #DF: if the thread stack is somehow unusable, we'll still get a useful OOPS. 970 */ 971.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 ist_offset=0 create_gap=0 read_cr2=0 972ENTRY(\sym) 973 UNWIND_HINT_IRET_REGS offset=\has_error_code*8 974 975 /* Sanity check */ 976 .if \shift_ist != -1 && \paranoid != 1 977 .error "using shift_ist requires paranoid=1" 978 .endif 979 980 .if \create_gap && \paranoid 981 .error "using create_gap requires paranoid=0" 982 .endif 983 984 ASM_CLAC 985 986 .if \has_error_code == 0 987 pushq $-1 /* ORIG_RAX: no syscall to restart */ 988 .endif 989 990 .if \paranoid == 1 991 testb $3, CS-ORIG_RAX(%rsp) /* If coming from userspace, switch stacks */ 992 jnz .Lfrom_usermode_switch_stack_\@ 993 .endif 994 995 .if \create_gap == 1 996 /* 997 * If coming from kernel space, create a 6-word gap to allow the 998 * int3 handler to emulate a call instruction. 999 */ 1000 testb $3, CS-ORIG_RAX(%rsp) 1001 jnz .Lfrom_usermode_no_gap_\@ 1002 .rept 6 1003 pushq 5*8(%rsp) 1004 .endr 1005 UNWIND_HINT_IRET_REGS offset=8 1006.Lfrom_usermode_no_gap_\@: 1007 .endif 1008 1009 idtentry_part \do_sym, \has_error_code, \read_cr2, \paranoid, \shift_ist, \ist_offset 1010 1011 .if \paranoid == 1 1012 /* 1013 * Entry from userspace. Switch stacks and treat it 1014 * as a normal entry. This means that paranoid handlers 1015 * run in real process context if user_mode(regs). 1016 */ 1017.Lfrom_usermode_switch_stack_\@: 1018 idtentry_part \do_sym, \has_error_code, \read_cr2, paranoid=0 1019 .endif 1020 1021_ASM_NOKPROBE(\sym) 1022END(\sym) 1023.endm 1024 1025idtentry divide_error do_divide_error has_error_code=0 1026idtentry overflow do_overflow has_error_code=0 1027idtentry bounds do_bounds has_error_code=0 1028idtentry invalid_op do_invalid_op has_error_code=0 1029idtentry device_not_available do_device_not_available has_error_code=0 1030idtentry double_fault do_double_fault has_error_code=1 paranoid=2 read_cr2=1 1031idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0 1032idtentry invalid_TSS do_invalid_TSS has_error_code=1 1033idtentry segment_not_present do_segment_not_present has_error_code=1 1034idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0 1035idtentry coprocessor_error do_coprocessor_error has_error_code=0 1036idtentry alignment_check do_alignment_check has_error_code=1 1037idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0 1038 1039 1040 /* 1041 * Reload gs selector with exception handling 1042 * edi: new selector 1043 */ 1044ENTRY(native_load_gs_index) 1045 FRAME_BEGIN 1046 pushfq 1047 DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI) 1048 TRACE_IRQS_OFF 1049 SWAPGS 1050.Lgs_change: 1051 movl %edi, %gs 10522: ALTERNATIVE "", "mfence", X86_BUG_SWAPGS_FENCE 1053 SWAPGS 1054 TRACE_IRQS_FLAGS (%rsp) 1055 popfq 1056 FRAME_END 1057 ret 1058ENDPROC(native_load_gs_index) 1059EXPORT_SYMBOL(native_load_gs_index) 1060 1061 _ASM_EXTABLE(.Lgs_change, .Lbad_gs) 1062 .section .fixup, "ax" 1063 /* running with kernelgs */ 1064.Lbad_gs: 1065 SWAPGS /* switch back to user gs */ 1066.macro ZAP_GS 1067 /* This can't be a string because the preprocessor needs to see it. */ 1068 movl $__USER_DS, %eax 1069 movl %eax, %gs 1070.endm 1071 ALTERNATIVE "", "ZAP_GS", X86_BUG_NULL_SEG 1072 xorl %eax, %eax 1073 movl %eax, %gs 1074 jmp 2b 1075 .previous 1076 1077/* Call softirq on interrupt stack. Interrupts are off. */ 1078ENTRY(do_softirq_own_stack) 1079 pushq %rbp 1080 mov %rsp, %rbp 1081 ENTER_IRQ_STACK regs=0 old_rsp=%r11 1082 call __do_softirq 1083 LEAVE_IRQ_STACK regs=0 1084 leaveq 1085 ret 1086ENDPROC(do_softirq_own_stack) 1087 1088#ifdef CONFIG_XEN_PV 1089idtentry hypervisor_callback xen_do_hypervisor_callback has_error_code=0 1090 1091/* 1092 * A note on the "critical region" in our callback handler. 1093 * We want to avoid stacking callback handlers due to events occurring 1094 * during handling of the last event. To do this, we keep events disabled 1095 * until we've done all processing. HOWEVER, we must enable events before 1096 * popping the stack frame (can't be done atomically) and so it would still 1097 * be possible to get enough handler activations to overflow the stack. 1098 * Although unlikely, bugs of that kind are hard to track down, so we'd 1099 * like to avoid the possibility. 1100 * So, on entry to the handler we detect whether we interrupted an 1101 * existing activation in its critical region -- if so, we pop the current 1102 * activation and restart the handler using the previous one. 1103 */ 1104ENTRY(xen_do_hypervisor_callback) /* do_hypervisor_callback(struct *pt_regs) */ 1105 1106/* 1107 * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will 1108 * see the correct pointer to the pt_regs 1109 */ 1110 UNWIND_HINT_FUNC 1111 movq %rdi, %rsp /* we don't return, adjust the stack frame */ 1112 UNWIND_HINT_REGS 1113 1114 ENTER_IRQ_STACK old_rsp=%r10 1115 call xen_evtchn_do_upcall 1116 LEAVE_IRQ_STACK 1117 1118#ifndef CONFIG_PREEMPTION 1119 call xen_maybe_preempt_hcall 1120#endif 1121 jmp error_exit 1122END(xen_do_hypervisor_callback) 1123 1124/* 1125 * Hypervisor uses this for application faults while it executes. 1126 * We get here for two reasons: 1127 * 1. Fault while reloading DS, ES, FS or GS 1128 * 2. Fault while executing IRET 1129 * Category 1 we do not need to fix up as Xen has already reloaded all segment 1130 * registers that could be reloaded and zeroed the others. 1131 * Category 2 we fix up by killing the current process. We cannot use the 1132 * normal Linux return path in this case because if we use the IRET hypercall 1133 * to pop the stack frame we end up in an infinite loop of failsafe callbacks. 1134 * We distinguish between categories by comparing each saved segment register 1135 * with its current contents: any discrepancy means we in category 1. 1136 */ 1137ENTRY(xen_failsafe_callback) 1138 UNWIND_HINT_EMPTY 1139 movl %ds, %ecx 1140 cmpw %cx, 0x10(%rsp) 1141 jne 1f 1142 movl %es, %ecx 1143 cmpw %cx, 0x18(%rsp) 1144 jne 1f 1145 movl %fs, %ecx 1146 cmpw %cx, 0x20(%rsp) 1147 jne 1f 1148 movl %gs, %ecx 1149 cmpw %cx, 0x28(%rsp) 1150 jne 1f 1151 /* All segments match their saved values => Category 2 (Bad IRET). */ 1152 movq (%rsp), %rcx 1153 movq 8(%rsp), %r11 1154 addq $0x30, %rsp 1155 pushq $0 /* RIP */ 1156 UNWIND_HINT_IRET_REGS offset=8 1157 jmp general_protection 11581: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */ 1159 movq (%rsp), %rcx 1160 movq 8(%rsp), %r11 1161 addq $0x30, %rsp 1162 UNWIND_HINT_IRET_REGS 1163 pushq $-1 /* orig_ax = -1 => not a system call */ 1164 PUSH_AND_CLEAR_REGS 1165 ENCODE_FRAME_POINTER 1166 jmp error_exit 1167END(xen_failsafe_callback) 1168#endif /* CONFIG_XEN_PV */ 1169 1170#ifdef CONFIG_XEN_PVHVM 1171apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ 1172 xen_hvm_callback_vector xen_evtchn_do_upcall 1173#endif 1174 1175 1176#if IS_ENABLED(CONFIG_HYPERV) 1177apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ 1178 hyperv_callback_vector hyperv_vector_handler 1179 1180apicinterrupt3 HYPERV_REENLIGHTENMENT_VECTOR \ 1181 hyperv_reenlightenment_vector hyperv_reenlightenment_intr 1182 1183apicinterrupt3 HYPERV_STIMER0_VECTOR \ 1184 hv_stimer0_callback_vector hv_stimer0_vector_handler 1185#endif /* CONFIG_HYPERV */ 1186 1187#if IS_ENABLED(CONFIG_ACRN_GUEST) 1188apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ 1189 acrn_hv_callback_vector acrn_hv_vector_handler 1190#endif 1191 1192idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=IST_INDEX_DB ist_offset=DB_STACK_OFFSET 1193idtentry int3 do_int3 has_error_code=0 create_gap=1 1194idtentry stack_segment do_stack_segment has_error_code=1 1195 1196#ifdef CONFIG_XEN_PV 1197idtentry xennmi do_nmi has_error_code=0 1198idtentry xendebug do_debug has_error_code=0 1199#endif 1200 1201idtentry general_protection do_general_protection has_error_code=1 1202idtentry page_fault do_page_fault has_error_code=1 read_cr2=1 1203 1204#ifdef CONFIG_KVM_GUEST 1205idtentry async_page_fault do_async_page_fault has_error_code=1 read_cr2=1 1206#endif 1207 1208#ifdef CONFIG_X86_MCE 1209idtentry machine_check do_mce has_error_code=0 paranoid=1 1210#endif 1211 1212/* 1213 * Save all registers in pt_regs, and switch gs if needed. 1214 * Use slow, but surefire "are we in kernel?" check. 1215 * Return: ebx=0: need swapgs on exit, ebx=1: otherwise 1216 */ 1217ENTRY(paranoid_entry) 1218 UNWIND_HINT_FUNC 1219 cld 1220 PUSH_AND_CLEAR_REGS save_ret=1 1221 ENCODE_FRAME_POINTER 8 1222 movl $1, %ebx 1223 movl $MSR_GS_BASE, %ecx 1224 rdmsr 1225 testl %edx, %edx 1226 js 1f /* negative -> in kernel */ 1227 SWAPGS 1228 xorl %ebx, %ebx 1229 12301: 1231 /* 1232 * Always stash CR3 in %r14. This value will be restored, 1233 * verbatim, at exit. Needed if paranoid_entry interrupted 1234 * another entry that already switched to the user CR3 value 1235 * but has not yet returned to userspace. 1236 * 1237 * This is also why CS (stashed in the "iret frame" by the 1238 * hardware at entry) can not be used: this may be a return 1239 * to kernel code, but with a user CR3 value. 1240 */ 1241 SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14 1242 1243 /* 1244 * The above SAVE_AND_SWITCH_TO_KERNEL_CR3 macro doesn't do an 1245 * unconditional CR3 write, even in the PTI case. So do an lfence 1246 * to prevent GS speculation, regardless of whether PTI is enabled. 1247 */ 1248 FENCE_SWAPGS_KERNEL_ENTRY 1249 1250 ret 1251END(paranoid_entry) 1252 1253/* 1254 * "Paranoid" exit path from exception stack. This is invoked 1255 * only on return from non-NMI IST interrupts that came 1256 * from kernel space. 1257 * 1258 * We may be returning to very strange contexts (e.g. very early 1259 * in syscall entry), so checking for preemption here would 1260 * be complicated. Fortunately, we there's no good reason 1261 * to try to handle preemption here. 1262 * 1263 * On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) 1264 */ 1265ENTRY(paranoid_exit) 1266 UNWIND_HINT_REGS 1267 DISABLE_INTERRUPTS(CLBR_ANY) 1268 TRACE_IRQS_OFF_DEBUG 1269 testl %ebx, %ebx /* swapgs needed? */ 1270 jnz .Lparanoid_exit_no_swapgs 1271 TRACE_IRQS_IRETQ 1272 /* Always restore stashed CR3 value (see paranoid_entry) */ 1273 RESTORE_CR3 scratch_reg=%rbx save_reg=%r14 1274 SWAPGS_UNSAFE_STACK 1275 jmp .Lparanoid_exit_restore 1276.Lparanoid_exit_no_swapgs: 1277 TRACE_IRQS_IRETQ_DEBUG 1278 /* Always restore stashed CR3 value (see paranoid_entry) */ 1279 RESTORE_CR3 scratch_reg=%rbx save_reg=%r14 1280.Lparanoid_exit_restore: 1281 jmp restore_regs_and_return_to_kernel 1282END(paranoid_exit) 1283 1284/* 1285 * Save all registers in pt_regs, and switch GS if needed. 1286 */ 1287ENTRY(error_entry) 1288 UNWIND_HINT_FUNC 1289 cld 1290 PUSH_AND_CLEAR_REGS save_ret=1 1291 ENCODE_FRAME_POINTER 8 1292 testb $3, CS+8(%rsp) 1293 jz .Lerror_kernelspace 1294 1295 /* 1296 * We entered from user mode or we're pretending to have entered 1297 * from user mode due to an IRET fault. 1298 */ 1299 SWAPGS 1300 FENCE_SWAPGS_USER_ENTRY 1301 /* We have user CR3. Change to kernel CR3. */ 1302 SWITCH_TO_KERNEL_CR3 scratch_reg=%rax 1303 1304.Lerror_entry_from_usermode_after_swapgs: 1305 /* Put us onto the real thread stack. */ 1306 popq %r12 /* save return addr in %12 */ 1307 movq %rsp, %rdi /* arg0 = pt_regs pointer */ 1308 call sync_regs 1309 movq %rax, %rsp /* switch stack */ 1310 ENCODE_FRAME_POINTER 1311 pushq %r12 1312 ret 1313 1314.Lerror_entry_done_lfence: 1315 FENCE_SWAPGS_KERNEL_ENTRY 1316.Lerror_entry_done: 1317 ret 1318 1319 /* 1320 * There are two places in the kernel that can potentially fault with 1321 * usergs. Handle them here. B stepping K8s sometimes report a 1322 * truncated RIP for IRET exceptions returning to compat mode. Check 1323 * for these here too. 1324 */ 1325.Lerror_kernelspace: 1326 leaq native_irq_return_iret(%rip), %rcx 1327 cmpq %rcx, RIP+8(%rsp) 1328 je .Lerror_bad_iret 1329 movl %ecx, %eax /* zero extend */ 1330 cmpq %rax, RIP+8(%rsp) 1331 je .Lbstep_iret 1332 cmpq $.Lgs_change, RIP+8(%rsp) 1333 jne .Lerror_entry_done_lfence 1334 1335 /* 1336 * hack: .Lgs_change can fail with user gsbase. If this happens, fix up 1337 * gsbase and proceed. We'll fix up the exception and land in 1338 * .Lgs_change's error handler with kernel gsbase. 1339 */ 1340 SWAPGS 1341 FENCE_SWAPGS_USER_ENTRY 1342 SWITCH_TO_KERNEL_CR3 scratch_reg=%rax 1343 jmp .Lerror_entry_done 1344 1345.Lbstep_iret: 1346 /* Fix truncated RIP */ 1347 movq %rcx, RIP+8(%rsp) 1348 /* fall through */ 1349 1350.Lerror_bad_iret: 1351 /* 1352 * We came from an IRET to user mode, so we have user 1353 * gsbase and CR3. Switch to kernel gsbase and CR3: 1354 */ 1355 SWAPGS 1356 FENCE_SWAPGS_USER_ENTRY 1357 SWITCH_TO_KERNEL_CR3 scratch_reg=%rax 1358 1359 /* 1360 * Pretend that the exception came from user mode: set up pt_regs 1361 * as if we faulted immediately after IRET. 1362 */ 1363 mov %rsp, %rdi 1364 call fixup_bad_iret 1365 mov %rax, %rsp 1366 jmp .Lerror_entry_from_usermode_after_swapgs 1367END(error_entry) 1368 1369ENTRY(error_exit) 1370 UNWIND_HINT_REGS 1371 DISABLE_INTERRUPTS(CLBR_ANY) 1372 TRACE_IRQS_OFF 1373 testb $3, CS(%rsp) 1374 jz retint_kernel 1375 jmp retint_user 1376END(error_exit) 1377 1378/* 1379 * Runs on exception stack. Xen PV does not go through this path at all, 1380 * so we can use real assembly here. 1381 * 1382 * Registers: 1383 * %r14: Used to save/restore the CR3 of the interrupted context 1384 * when PAGE_TABLE_ISOLATION is in use. Do not clobber. 1385 */ 1386ENTRY(nmi) 1387 UNWIND_HINT_IRET_REGS 1388 1389 /* 1390 * We allow breakpoints in NMIs. If a breakpoint occurs, then 1391 * the iretq it performs will take us out of NMI context. 1392 * This means that we can have nested NMIs where the next 1393 * NMI is using the top of the stack of the previous NMI. We 1394 * can't let it execute because the nested NMI will corrupt the 1395 * stack of the previous NMI. NMI handlers are not re-entrant 1396 * anyway. 1397 * 1398 * To handle this case we do the following: 1399 * Check the a special location on the stack that contains 1400 * a variable that is set when NMIs are executing. 1401 * The interrupted task's stack is also checked to see if it 1402 * is an NMI stack. 1403 * If the variable is not set and the stack is not the NMI 1404 * stack then: 1405 * o Set the special variable on the stack 1406 * o Copy the interrupt frame into an "outermost" location on the 1407 * stack 1408 * o Copy the interrupt frame into an "iret" location on the stack 1409 * o Continue processing the NMI 1410 * If the variable is set or the previous stack is the NMI stack: 1411 * o Modify the "iret" location to jump to the repeat_nmi 1412 * o return back to the first NMI 1413 * 1414 * Now on exit of the first NMI, we first clear the stack variable 1415 * The NMI stack will tell any nested NMIs at that point that it is 1416 * nested. Then we pop the stack normally with iret, and if there was 1417 * a nested NMI that updated the copy interrupt stack frame, a 1418 * jump will be made to the repeat_nmi code that will handle the second 1419 * NMI. 1420 * 1421 * However, espfix prevents us from directly returning to userspace 1422 * with a single IRET instruction. Similarly, IRET to user mode 1423 * can fault. We therefore handle NMIs from user space like 1424 * other IST entries. 1425 */ 1426 1427 ASM_CLAC 1428 1429 /* Use %rdx as our temp variable throughout */ 1430 pushq %rdx 1431 1432 testb $3, CS-RIP+8(%rsp) 1433 jz .Lnmi_from_kernel 1434 1435 /* 1436 * NMI from user mode. We need to run on the thread stack, but we 1437 * can't go through the normal entry paths: NMIs are masked, and 1438 * we don't want to enable interrupts, because then we'll end 1439 * up in an awkward situation in which IRQs are on but NMIs 1440 * are off. 1441 * 1442 * We also must not push anything to the stack before switching 1443 * stacks lest we corrupt the "NMI executing" variable. 1444 */ 1445 1446 swapgs 1447 cld 1448 FENCE_SWAPGS_USER_ENTRY 1449 SWITCH_TO_KERNEL_CR3 scratch_reg=%rdx 1450 movq %rsp, %rdx 1451 movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp 1452 UNWIND_HINT_IRET_REGS base=%rdx offset=8 1453 pushq 5*8(%rdx) /* pt_regs->ss */ 1454 pushq 4*8(%rdx) /* pt_regs->rsp */ 1455 pushq 3*8(%rdx) /* pt_regs->flags */ 1456 pushq 2*8(%rdx) /* pt_regs->cs */ 1457 pushq 1*8(%rdx) /* pt_regs->rip */ 1458 UNWIND_HINT_IRET_REGS 1459 pushq $-1 /* pt_regs->orig_ax */ 1460 PUSH_AND_CLEAR_REGS rdx=(%rdx) 1461 ENCODE_FRAME_POINTER 1462 1463 /* 1464 * At this point we no longer need to worry about stack damage 1465 * due to nesting -- we're on the normal thread stack and we're 1466 * done with the NMI stack. 1467 */ 1468 1469 movq %rsp, %rdi 1470 movq $-1, %rsi 1471 call do_nmi 1472 1473 /* 1474 * Return back to user mode. We must *not* do the normal exit 1475 * work, because we don't want to enable interrupts. 1476 */ 1477 jmp swapgs_restore_regs_and_return_to_usermode 1478 1479.Lnmi_from_kernel: 1480 /* 1481 * Here's what our stack frame will look like: 1482 * +---------------------------------------------------------+ 1483 * | original SS | 1484 * | original Return RSP | 1485 * | original RFLAGS | 1486 * | original CS | 1487 * | original RIP | 1488 * +---------------------------------------------------------+ 1489 * | temp storage for rdx | 1490 * +---------------------------------------------------------+ 1491 * | "NMI executing" variable | 1492 * +---------------------------------------------------------+ 1493 * | iret SS } Copied from "outermost" frame | 1494 * | iret Return RSP } on each loop iteration; overwritten | 1495 * | iret RFLAGS } by a nested NMI to force another | 1496 * | iret CS } iteration if needed. | 1497 * | iret RIP } | 1498 * +---------------------------------------------------------+ 1499 * | outermost SS } initialized in first_nmi; | 1500 * | outermost Return RSP } will not be changed before | 1501 * | outermost RFLAGS } NMI processing is done. | 1502 * | outermost CS } Copied to "iret" frame on each | 1503 * | outermost RIP } iteration. | 1504 * +---------------------------------------------------------+ 1505 * | pt_regs | 1506 * +---------------------------------------------------------+ 1507 * 1508 * The "original" frame is used by hardware. Before re-enabling 1509 * NMIs, we need to be done with it, and we need to leave enough 1510 * space for the asm code here. 1511 * 1512 * We return by executing IRET while RSP points to the "iret" frame. 1513 * That will either return for real or it will loop back into NMI 1514 * processing. 1515 * 1516 * The "outermost" frame is copied to the "iret" frame on each 1517 * iteration of the loop, so each iteration starts with the "iret" 1518 * frame pointing to the final return target. 1519 */ 1520 1521 /* 1522 * Determine whether we're a nested NMI. 1523 * 1524 * If we interrupted kernel code between repeat_nmi and 1525 * end_repeat_nmi, then we are a nested NMI. We must not 1526 * modify the "iret" frame because it's being written by 1527 * the outer NMI. That's okay; the outer NMI handler is 1528 * about to about to call do_nmi anyway, so we can just 1529 * resume the outer NMI. 1530 */ 1531 1532 movq $repeat_nmi, %rdx 1533 cmpq 8(%rsp), %rdx 1534 ja 1f 1535 movq $end_repeat_nmi, %rdx 1536 cmpq 8(%rsp), %rdx 1537 ja nested_nmi_out 15381: 1539 1540 /* 1541 * Now check "NMI executing". If it's set, then we're nested. 1542 * This will not detect if we interrupted an outer NMI just 1543 * before IRET. 1544 */ 1545 cmpl $1, -8(%rsp) 1546 je nested_nmi 1547 1548 /* 1549 * Now test if the previous stack was an NMI stack. This covers 1550 * the case where we interrupt an outer NMI after it clears 1551 * "NMI executing" but before IRET. We need to be careful, though: 1552 * there is one case in which RSP could point to the NMI stack 1553 * despite there being no NMI active: naughty userspace controls 1554 * RSP at the very beginning of the SYSCALL targets. We can 1555 * pull a fast one on naughty userspace, though: we program 1556 * SYSCALL to mask DF, so userspace cannot cause DF to be set 1557 * if it controls the kernel's RSP. We set DF before we clear 1558 * "NMI executing". 1559 */ 1560 lea 6*8(%rsp), %rdx 1561 /* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */ 1562 cmpq %rdx, 4*8(%rsp) 1563 /* If the stack pointer is above the NMI stack, this is a normal NMI */ 1564 ja first_nmi 1565 1566 subq $EXCEPTION_STKSZ, %rdx 1567 cmpq %rdx, 4*8(%rsp) 1568 /* If it is below the NMI stack, it is a normal NMI */ 1569 jb first_nmi 1570 1571 /* Ah, it is within the NMI stack. */ 1572 1573 testb $(X86_EFLAGS_DF >> 8), (3*8 + 1)(%rsp) 1574 jz first_nmi /* RSP was user controlled. */ 1575 1576 /* This is a nested NMI. */ 1577 1578nested_nmi: 1579 /* 1580 * Modify the "iret" frame to point to repeat_nmi, forcing another 1581 * iteration of NMI handling. 1582 */ 1583 subq $8, %rsp 1584 leaq -10*8(%rsp), %rdx 1585 pushq $__KERNEL_DS 1586 pushq %rdx 1587 pushfq 1588 pushq $__KERNEL_CS 1589 pushq $repeat_nmi 1590 1591 /* Put stack back */ 1592 addq $(6*8), %rsp 1593 1594nested_nmi_out: 1595 popq %rdx 1596 1597 /* We are returning to kernel mode, so this cannot result in a fault. */ 1598 iretq 1599 1600first_nmi: 1601 /* Restore rdx. */ 1602 movq (%rsp), %rdx 1603 1604 /* Make room for "NMI executing". */ 1605 pushq $0 1606 1607 /* Leave room for the "iret" frame */ 1608 subq $(5*8), %rsp 1609 1610 /* Copy the "original" frame to the "outermost" frame */ 1611 .rept 5 1612 pushq 11*8(%rsp) 1613 .endr 1614 UNWIND_HINT_IRET_REGS 1615 1616 /* Everything up to here is safe from nested NMIs */ 1617 1618#ifdef CONFIG_DEBUG_ENTRY 1619 /* 1620 * For ease of testing, unmask NMIs right away. Disabled by 1621 * default because IRET is very expensive. 1622 */ 1623 pushq $0 /* SS */ 1624 pushq %rsp /* RSP (minus 8 because of the previous push) */ 1625 addq $8, (%rsp) /* Fix up RSP */ 1626 pushfq /* RFLAGS */ 1627 pushq $__KERNEL_CS /* CS */ 1628 pushq $1f /* RIP */ 1629 iretq /* continues at repeat_nmi below */ 1630 UNWIND_HINT_IRET_REGS 16311: 1632#endif 1633 1634repeat_nmi: 1635 /* 1636 * If there was a nested NMI, the first NMI's iret will return 1637 * here. But NMIs are still enabled and we can take another 1638 * nested NMI. The nested NMI checks the interrupted RIP to see 1639 * if it is between repeat_nmi and end_repeat_nmi, and if so 1640 * it will just return, as we are about to repeat an NMI anyway. 1641 * This makes it safe to copy to the stack frame that a nested 1642 * NMI will update. 1643 * 1644 * RSP is pointing to "outermost RIP". gsbase is unknown, but, if 1645 * we're repeating an NMI, gsbase has the same value that it had on 1646 * the first iteration. paranoid_entry will load the kernel 1647 * gsbase if needed before we call do_nmi. "NMI executing" 1648 * is zero. 1649 */ 1650 movq $1, 10*8(%rsp) /* Set "NMI executing". */ 1651 1652 /* 1653 * Copy the "outermost" frame to the "iret" frame. NMIs that nest 1654 * here must not modify the "iret" frame while we're writing to 1655 * it or it will end up containing garbage. 1656 */ 1657 addq $(10*8), %rsp 1658 .rept 5 1659 pushq -6*8(%rsp) 1660 .endr 1661 subq $(5*8), %rsp 1662end_repeat_nmi: 1663 1664 /* 1665 * Everything below this point can be preempted by a nested NMI. 1666 * If this happens, then the inner NMI will change the "iret" 1667 * frame to point back to repeat_nmi. 1668 */ 1669 pushq $-1 /* ORIG_RAX: no syscall to restart */ 1670 1671 /* 1672 * Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit 1673 * as we should not be calling schedule in NMI context. 1674 * Even with normal interrupts enabled. An NMI should not be 1675 * setting NEED_RESCHED or anything that normal interrupts and 1676 * exceptions might do. 1677 */ 1678 call paranoid_entry 1679 UNWIND_HINT_REGS 1680 1681 /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */ 1682 movq %rsp, %rdi 1683 movq $-1, %rsi 1684 call do_nmi 1685 1686 /* Always restore stashed CR3 value (see paranoid_entry) */ 1687 RESTORE_CR3 scratch_reg=%r15 save_reg=%r14 1688 1689 testl %ebx, %ebx /* swapgs needed? */ 1690 jnz nmi_restore 1691nmi_swapgs: 1692 SWAPGS_UNSAFE_STACK 1693nmi_restore: 1694 POP_REGS 1695 1696 /* 1697 * Skip orig_ax and the "outermost" frame to point RSP at the "iret" 1698 * at the "iret" frame. 1699 */ 1700 addq $6*8, %rsp 1701 1702 /* 1703 * Clear "NMI executing". Set DF first so that we can easily 1704 * distinguish the remaining code between here and IRET from 1705 * the SYSCALL entry and exit paths. 1706 * 1707 * We arguably should just inspect RIP instead, but I (Andy) wrote 1708 * this code when I had the misapprehension that Xen PV supported 1709 * NMIs, and Xen PV would break that approach. 1710 */ 1711 std 1712 movq $0, 5*8(%rsp) /* clear "NMI executing" */ 1713 1714 /* 1715 * iretq reads the "iret" frame and exits the NMI stack in a 1716 * single instruction. We are returning to kernel mode, so this 1717 * cannot result in a fault. Similarly, we don't need to worry 1718 * about espfix64 on the way back to kernel mode. 1719 */ 1720 iretq 1721END(nmi) 1722 1723#ifndef CONFIG_IA32_EMULATION 1724/* 1725 * This handles SYSCALL from 32-bit code. There is no way to program 1726 * MSRs to fully disable 32-bit SYSCALL. 1727 */ 1728ENTRY(ignore_sysret) 1729 UNWIND_HINT_EMPTY 1730 mov $-ENOSYS, %eax 1731 sysret 1732END(ignore_sysret) 1733#endif 1734 1735ENTRY(rewind_stack_do_exit) 1736 UNWIND_HINT_FUNC 1737 /* Prevent any naive code from trying to unwind to our caller. */ 1738 xorl %ebp, %ebp 1739 1740 movq PER_CPU_VAR(cpu_current_top_of_stack), %rax 1741 leaq -PTREGS_SIZE(%rax), %rsp 1742 UNWIND_HINT_FUNC sp_offset=PTREGS_SIZE 1743 1744 call do_exit 1745END(rewind_stack_do_exit) 1746