1 #include <linux/efi.h> 2 #include <asm/e820/types.h> 3 #include <asm/processor.h> 4 #include <asm/efi.h> 5 #include "pgtable.h" 6 #include "../string.h" 7 8 /* 9 * __force_order is used by special_insns.h asm code to force instruction 10 * serialization. 11 * 12 * It is not referenced from the code, but GCC < 5 with -fPIE would fail 13 * due to an undefined symbol. Define it to make these ancient GCCs work. 14 */ 15 unsigned long __force_order; 16 17 #define BIOS_START_MIN 0x20000U /* 128K, less than this is insane */ 18 #define BIOS_START_MAX 0x9f000U /* 640K, absolute maximum */ 19 20 struct paging_config { 21 unsigned long trampoline_start; 22 unsigned long l5_required; 23 }; 24 25 /* Buffer to preserve trampoline memory */ 26 static char trampoline_save[TRAMPOLINE_32BIT_SIZE]; 27 28 /* 29 * Trampoline address will be printed by extract_kernel() for debugging 30 * purposes. 31 * 32 * Avoid putting the pointer into .bss as it will be cleared between 33 * paging_prepare() and extract_kernel(). 34 */ 35 unsigned long *trampoline_32bit __section(.data); 36 37 extern struct boot_params *boot_params; 38 int cmdline_find_option_bool(const char *option); 39 40 static unsigned long find_trampoline_placement(void) 41 { 42 unsigned long bios_start = 0, ebda_start = 0; 43 struct boot_e820_entry *entry; 44 char *signature; 45 int i; 46 47 /* 48 * Find a suitable spot for the trampoline. 49 * This code is based on reserve_bios_regions(). 50 */ 51 52 /* 53 * EFI systems may not provide legacy ROM. The memory may not be mapped 54 * at all. 55 * 56 * Only look for values in the legacy ROM for non-EFI system. 57 */ 58 signature = (char *)&boot_params->efi_info.efi_loader_signature; 59 if (strncmp(signature, EFI32_LOADER_SIGNATURE, 4) && 60 strncmp(signature, EFI64_LOADER_SIGNATURE, 4)) { 61 ebda_start = *(unsigned short *)0x40e << 4; 62 bios_start = *(unsigned short *)0x413 << 10; 63 } 64 65 if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX) 66 bios_start = BIOS_START_MAX; 67 68 if (ebda_start > BIOS_START_MIN && ebda_start < bios_start) 69 bios_start = ebda_start; 70 71 bios_start = round_down(bios_start, PAGE_SIZE); 72 73 /* Find the first usable memory region under bios_start. */ 74 for (i = boot_params->e820_entries - 1; i >= 0; i--) { 75 unsigned long new = bios_start; 76 77 entry = &boot_params->e820_table[i]; 78 79 /* Skip all entries above bios_start. */ 80 if (bios_start <= entry->addr) 81 continue; 82 83 /* Skip non-RAM entries. */ 84 if (entry->type != E820_TYPE_RAM) 85 continue; 86 87 /* Adjust bios_start to the end of the entry if needed. */ 88 if (bios_start > entry->addr + entry->size) 89 new = entry->addr + entry->size; 90 91 /* Keep bios_start page-aligned. */ 92 new = round_down(new, PAGE_SIZE); 93 94 /* Skip the entry if it's too small. */ 95 if (new - TRAMPOLINE_32BIT_SIZE < entry->addr) 96 continue; 97 98 /* Protect against underflow. */ 99 if (new - TRAMPOLINE_32BIT_SIZE > bios_start) 100 break; 101 102 bios_start = new; 103 break; 104 } 105 106 /* Place the trampoline just below the end of low memory */ 107 return bios_start - TRAMPOLINE_32BIT_SIZE; 108 } 109 110 struct paging_config paging_prepare(void *rmode) 111 { 112 struct paging_config paging_config = {}; 113 114 /* Initialize boot_params. Required for cmdline_find_option_bool(). */ 115 boot_params = rmode; 116 117 /* 118 * Check if LA57 is desired and supported. 119 * 120 * There are several parts to the check: 121 * - if the kernel supports 5-level paging: CONFIG_X86_5LEVEL=y 122 * - if user asked to disable 5-level paging: no5lvl in cmdline 123 * - if the machine supports 5-level paging: 124 * + CPUID leaf 7 is supported 125 * + the leaf has the feature bit set 126 * 127 * That's substitute for boot_cpu_has() in early boot code. 128 */ 129 if (IS_ENABLED(CONFIG_X86_5LEVEL) && 130 !cmdline_find_option_bool("no5lvl") && 131 native_cpuid_eax(0) >= 7 && 132 (native_cpuid_ecx(7) & (1 << (X86_FEATURE_LA57 & 31)))) { 133 paging_config.l5_required = 1; 134 } 135 136 paging_config.trampoline_start = find_trampoline_placement(); 137 138 trampoline_32bit = (unsigned long *)paging_config.trampoline_start; 139 140 /* Preserve trampoline memory */ 141 memcpy(trampoline_save, trampoline_32bit, TRAMPOLINE_32BIT_SIZE); 142 143 /* Clear trampoline memory first */ 144 memset(trampoline_32bit, 0, TRAMPOLINE_32BIT_SIZE); 145 146 /* Copy trampoline code in place */ 147 memcpy(trampoline_32bit + TRAMPOLINE_32BIT_CODE_OFFSET / sizeof(unsigned long), 148 &trampoline_32bit_src, TRAMPOLINE_32BIT_CODE_SIZE); 149 150 /* 151 * The code below prepares page table in trampoline memory. 152 * 153 * The new page table will be used by trampoline code for switching 154 * from 4- to 5-level paging or vice versa. 155 * 156 * If switching is not required, the page table is unused: trampoline 157 * code wouldn't touch CR3. 158 */ 159 160 /* 161 * We are not going to use the page table in trampoline memory if we 162 * are already in the desired paging mode. 163 */ 164 if (paging_config.l5_required == !!(native_read_cr4() & X86_CR4_LA57)) 165 goto out; 166 167 if (paging_config.l5_required) { 168 /* 169 * For 4- to 5-level paging transition, set up current CR3 as 170 * the first and the only entry in a new top-level page table. 171 */ 172 trampoline_32bit[TRAMPOLINE_32BIT_PGTABLE_OFFSET] = __native_read_cr3() | _PAGE_TABLE_NOENC; 173 } else { 174 unsigned long src; 175 176 /* 177 * For 5- to 4-level paging transition, copy page table pointed 178 * by first entry in the current top-level page table as our 179 * new top-level page table. 180 * 181 * We cannot just point to the page table from trampoline as it 182 * may be above 4G. 183 */ 184 src = *(unsigned long *)__native_read_cr3() & PAGE_MASK; 185 memcpy(trampoline_32bit + TRAMPOLINE_32BIT_PGTABLE_OFFSET / sizeof(unsigned long), 186 (void *)src, PAGE_SIZE); 187 } 188 189 out: 190 return paging_config; 191 } 192 193 void cleanup_trampoline(void *pgtable) 194 { 195 void *trampoline_pgtable; 196 197 trampoline_pgtable = trampoline_32bit + TRAMPOLINE_32BIT_PGTABLE_OFFSET / sizeof(unsigned long); 198 199 /* 200 * Move the top level page table out of trampoline memory, 201 * if it's there. 202 */ 203 if ((void *)__native_read_cr3() == trampoline_pgtable) { 204 memcpy(pgtable, trampoline_pgtable, PAGE_SIZE); 205 native_write_cr3((unsigned long)pgtable); 206 } 207 208 /* Restore trampoline memory */ 209 memcpy(trampoline_32bit, trampoline_save, TRAMPOLINE_32BIT_SIZE); 210 } 211