1# Unified Makefile for i386 and x86_64 2 3# select defconfig based on actual architecture 4ifeq ($(ARCH),x86) 5 ifeq ($(shell uname -m),x86_64) 6 KBUILD_DEFCONFIG := x86_64_defconfig 7 else 8 KBUILD_DEFCONFIG := i386_defconfig 9 endif 10else 11 KBUILD_DEFCONFIG := $(ARCH)_defconfig 12endif 13 14# How to compile the 16-bit code. Note we always compile for -march=i386; 15# that way we can complain to the user if the CPU is insufficient. 16# 17# The -m16 option is supported by GCC >= 4.9 and clang >= 3.5. For 18# older versions of GCC, include an *assembly* header to make sure that 19# gcc doesn't play any games behind our back. 20CODE16GCC_CFLAGS := -m32 -Wa,$(srctree)/arch/x86/boot/code16gcc.h 21M16_CFLAGS := $(call cc-option, -m16, $(CODE16GCC_CFLAGS)) 22 23REALMODE_CFLAGS := $(M16_CFLAGS) -g -Os -D__KERNEL__ \ 24 -DDISABLE_BRANCH_PROFILING \ 25 -Wall -Wstrict-prototypes -march=i386 -mregparm=3 \ 26 -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ 27 -mno-mmx -mno-sse \ 28 $(call cc-option, -ffreestanding) \ 29 $(call cc-option, -fno-stack-protector) \ 30 $(call cc-option, -mpreferred-stack-boundary=2) 31export REALMODE_CFLAGS 32 33# BITS is used as extension for files which are available in a 32 bit 34# and a 64 bit version to simplify shared Makefiles. 35# e.g.: obj-y += foo_$(BITS).o 36export BITS 37 38ifdef CONFIG_X86_NEED_RELOCS 39 LDFLAGS_vmlinux := --emit-relocs 40endif 41 42# 43# Prevent GCC from generating any FP code by mistake. 44# 45# This must happen before we try the -mpreferred-stack-boundary, see: 46# 47# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53383 48# 49KBUILD_CFLAGS += -mno-sse -mno-mmx -mno-sse2 -mno-3dnow 50KBUILD_CFLAGS += $(call cc-option,-mno-avx,) 51 52ifeq ($(CONFIG_X86_32),y) 53 BITS := 32 54 UTS_MACHINE := i386 55 CHECKFLAGS += -D__i386__ 56 57 biarch := $(call cc-option,-m32) 58 KBUILD_AFLAGS += $(biarch) 59 KBUILD_CFLAGS += $(biarch) 60 61 KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return 62 63 # Never want PIC in a 32-bit kernel, prevent breakage with GCC built 64 # with nonstandard options 65 KBUILD_CFLAGS += -fno-pic 66 67 # prevent gcc from keeping the stack 16 byte aligned 68 KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) 69 70 # Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use 71 # a lot more stack due to the lack of sharing of stacklots: 72 KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0400, \ 73 $(call cc-option,-fno-unit-at-a-time)) 74 75 # CPU-specific tuning. Anything which can be shared with UML should go here. 76 include arch/x86/Makefile_32.cpu 77 KBUILD_CFLAGS += $(cflags-y) 78 79 # temporary until string.h is fixed 80 KBUILD_CFLAGS += -ffreestanding 81else 82 BITS := 64 83 UTS_MACHINE := x86_64 84 CHECKFLAGS += -D__x86_64__ -m64 85 86 biarch := -m64 87 KBUILD_AFLAGS += -m64 88 KBUILD_CFLAGS += -m64 89 90 # Align jump targets to 1 byte, not the default 16 bytes: 91 KBUILD_CFLAGS += -falign-jumps=1 92 93 # Pack loops tightly as well: 94 KBUILD_CFLAGS += -falign-loops=1 95 96 # Don't autogenerate traditional x87 instructions 97 KBUILD_CFLAGS += $(call cc-option,-mno-80387) 98 KBUILD_CFLAGS += $(call cc-option,-mno-fp-ret-in-387) 99 100 # Use -mpreferred-stack-boundary=3 if supported. 101 KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3) 102 103 # Use -mskip-rax-setup if supported. 104 KBUILD_CFLAGS += $(call cc-option,-mskip-rax-setup) 105 106 # FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu) 107 cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8) 108 cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona) 109 110 cflags-$(CONFIG_MCORE2) += \ 111 $(call cc-option,-march=core2,$(call cc-option,-mtune=generic)) 112 cflags-$(CONFIG_MATOM) += $(call cc-option,-march=atom) \ 113 $(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic)) 114 cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic) 115 KBUILD_CFLAGS += $(cflags-y) 116 117 KBUILD_CFLAGS += -mno-red-zone 118 KBUILD_CFLAGS += -mcmodel=kernel 119 120 # -funit-at-a-time shrinks the kernel .text considerably 121 # unfortunately it makes reading oopses harder. 122 KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time) 123 124 # this works around some issues with generating unwind tables in older gccs 125 # newer gccs do it by default 126 KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args) 127endif 128 129ifdef CONFIG_X86_X32 130 x32_ld_ok := $(call try-run,\ 131 /bin/echo -e '1: .quad 1b' | \ 132 $(CC) $(KBUILD_AFLAGS) -c -x assembler -o "$$TMP" - && \ 133 $(OBJCOPY) -O elf32-x86-64 "$$TMP" "$$TMPO" && \ 134 $(LD) -m elf32_x86_64 "$$TMPO" -o "$$TMP",y,n) 135 ifeq ($(x32_ld_ok),y) 136 CONFIG_X86_X32_ABI := y 137 KBUILD_AFLAGS += -DCONFIG_X86_X32_ABI 138 KBUILD_CFLAGS += -DCONFIG_X86_X32_ABI 139 else 140 $(warning CONFIG_X86_X32 enabled but no binutils support) 141 endif 142endif 143export CONFIG_X86_X32_ABI 144 145# Don't unroll struct assignments with kmemcheck enabled 146ifeq ($(CONFIG_KMEMCHECK),y) 147 KBUILD_CFLAGS += $(call cc-option,-fno-builtin-memcpy) 148endif 149 150# Stackpointer is addressed different for 32 bit and 64 bit x86 151sp-$(CONFIG_X86_32) := esp 152sp-$(CONFIG_X86_64) := rsp 153 154# do binutils support CFI? 155cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1) 156# is .cfi_signal_frame supported too? 157cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1) 158cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1) 159 160# does binutils support specific instructions? 161asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1) 162asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1) 163asinstr += $(call as-instr,crc32l %eax$(comma)%eax,-DCONFIG_AS_CRC32=1) 164avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1) 165avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1) 166avx512_instr :=$(call as-instr,vpmovm2b %k1$(comma)%zmm5,-DCONFIG_AS_AVX512=1) 167sha1_ni_instr :=$(call as-instr,sha1msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA1_NI=1) 168sha256_ni_instr :=$(call as-instr,sha256msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA256_NI=1) 169 170KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) 171KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) 172 173LDFLAGS := -m elf_$(UTS_MACHINE) 174 175# Speed up the build 176KBUILD_CFLAGS += -pipe 177# Workaround for a gcc prelease that unfortunately was shipped in a suse release 178KBUILD_CFLAGS += -Wno-sign-compare 179# 180KBUILD_CFLAGS += -fno-asynchronous-unwind-tables 181 182KBUILD_CFLAGS += $(mflags-y) 183KBUILD_AFLAGS += $(mflags-y) 184 185archscripts: scripts_basic 186 $(Q)$(MAKE) $(build)=arch/x86/tools relocs 187 188### 189# Syscall table generation 190 191archheaders: 192 $(Q)$(MAKE) $(build)=arch/x86/entry/syscalls all 193 194archprepare: 195ifeq ($(CONFIG_KEXEC_FILE),y) 196 $(Q)$(MAKE) $(build)=arch/x86/purgatory arch/x86/purgatory/kexec-purgatory.c 197endif 198 199### 200# Kernel objects 201 202head-y := arch/x86/kernel/head_$(BITS).o 203head-y += arch/x86/kernel/head$(BITS).o 204head-y += arch/x86/kernel/ebda.o 205head-y += arch/x86/kernel/platform-quirks.o 206 207libs-y += arch/x86/lib/ 208 209# See arch/x86/Kbuild for content of core part of the kernel 210core-y += arch/x86/ 211 212# drivers-y are linked after core-y 213drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/ 214drivers-$(CONFIG_PCI) += arch/x86/pci/ 215 216# must be linked after kernel/ 217drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/ 218 219# suspend and hibernation support 220drivers-$(CONFIG_PM) += arch/x86/power/ 221 222drivers-$(CONFIG_FB) += arch/x86/video/ 223 224drivers-$(CONFIG_RAS) += arch/x86/ras/ 225 226#### 227# boot loader support. Several targets are kept for legacy purposes 228 229boot := arch/x86/boot 230 231BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage 232 233PHONY += bzImage $(BOOT_TARGETS) 234 235# Default kernel to build 236all: bzImage 237 238# KBUILD_IMAGE specify target image being built 239KBUILD_IMAGE := $(boot)/bzImage 240 241bzImage: vmlinux 242ifeq ($(CONFIG_X86_DECODER_SELFTEST),y) 243 $(Q)$(MAKE) $(build)=arch/x86/tools posttest 244endif 245 $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) 246 $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot 247 $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@ 248 249$(BOOT_TARGETS): vmlinux 250 $(Q)$(MAKE) $(build)=$(boot) $@ 251 252PHONY += install 253install: 254 $(Q)$(MAKE) $(build)=$(boot) $@ 255 256PHONY += vdso_install 257vdso_install: 258 $(Q)$(MAKE) $(build)=arch/x86/entry/vdso $@ 259 260archclean: 261 $(Q)rm -rf $(objtree)/arch/i386 262 $(Q)rm -rf $(objtree)/arch/x86_64 263 $(Q)$(MAKE) $(clean)=$(boot) 264 $(Q)$(MAKE) $(clean)=arch/x86/tools 265 $(Q)$(MAKE) $(clean)=arch/x86/purgatory 266 267define archhelp 268 echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' 269 echo ' install - Install kernel using' 270 echo ' (your) ~/bin/$(INSTALLKERNEL) or' 271 echo ' (distribution) /sbin/$(INSTALLKERNEL) or' 272 echo ' install to $$(INSTALL_PATH) and run lilo' 273 echo ' fdimage - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)' 274 echo ' fdimage144 - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)' 275 echo ' fdimage288 - Create 2.8MB boot floppy image (arch/x86/boot/fdimage)' 276 echo ' isoimage - Create a boot CD-ROM image (arch/x86/boot/image.iso)' 277 echo ' bzdisk/fdimage*/isoimage also accept:' 278 echo ' FDARGS="..." arguments for the booted kernel' 279 echo ' FDINITRD=file initrd for the booted kernel' 280endef 281