1# Select 32 or 64 bit 2config 64BIT 3 bool "64-bit kernel" if ARCH = "x86" 4 default ARCH != "i386" 5 ---help--- 6 Say yes to build a 64-bit kernel - formerly known as x86_64 7 Say no to build a 32-bit kernel - formerly known as i386 8 9config X86_32 10 def_bool y 11 depends on !64BIT 12 13config X86_64 14 def_bool y 15 depends on 64BIT 16 17### Arch settings 18config X86 19 def_bool y 20 select ACPI_LEGACY_TABLES_LOOKUP if ACPI 21 select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI 22 select ANON_INODES 23 select ARCH_CLOCKSOURCE_DATA 24 select ARCH_DISCARD_MEMBLOCK 25 select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE 26 select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS 27 select ARCH_HAS_DEVMEM_IS_ALLOWED 28 select ARCH_HAS_ELF_RANDOMIZE 29 select ARCH_HAS_FAST_MULTIPLIER 30 select ARCH_HAS_GCOV_PROFILE_ALL 31 select ARCH_HAS_PMEM_API if X86_64 32 select ARCH_HAS_MMIO_FLUSH 33 select ARCH_HAS_SG_CHAIN 34 select ARCH_HAS_UBSAN_SANITIZE_ALL 35 select ARCH_HAVE_NMI_SAFE_CMPXCHG 36 select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI 37 select ARCH_MIGHT_HAVE_PC_PARPORT 38 select ARCH_MIGHT_HAVE_PC_SERIO 39 select ARCH_SUPPORTS_ATOMIC_RMW 40 select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT 41 select ARCH_SUPPORTS_INT128 if X86_64 42 select ARCH_SUPPORTS_NUMA_BALANCING if X86_64 43 select ARCH_USE_BUILTIN_BSWAP 44 select ARCH_USE_CMPXCHG_LOCKREF if X86_64 45 select ARCH_USE_QUEUED_RWLOCKS 46 select ARCH_USE_QUEUED_SPINLOCKS 47 select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH if SMP 48 select ARCH_WANTS_DYNAMIC_TASK_STRUCT 49 select ARCH_WANT_FRAME_POINTERS 50 select ARCH_WANT_IPC_PARSE_VERSION if X86_32 51 select ARCH_WANT_OPTIONAL_GPIOLIB 52 select BUILDTIME_EXTABLE_SORT 53 select CLKEVT_I8253 54 select CLKSRC_I8253 if X86_32 55 select CLOCKSOURCE_VALIDATE_LAST_CYCLE 56 select CLOCKSOURCE_WATCHDOG 57 select CLONE_BACKWARDS if X86_32 58 select COMPAT_OLD_SIGACTION if IA32_EMULATION 59 select DCACHE_WORD_ACCESS 60 select EDAC_ATOMIC_SCRUB 61 select EDAC_SUPPORT 62 select GENERIC_CLOCKEVENTS 63 select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC) 64 select GENERIC_CLOCKEVENTS_MIN_ADJUST 65 select GENERIC_CMOS_UPDATE 66 select GENERIC_CPU_AUTOPROBE 67 select GENERIC_EARLY_IOREMAP 68 select GENERIC_FIND_FIRST_BIT 69 select GENERIC_IOMAP 70 select GENERIC_IRQ_PROBE 71 select GENERIC_IRQ_SHOW 72 select GENERIC_PENDING_IRQ if SMP 73 select GENERIC_SMP_IDLE_THREAD 74 select GENERIC_STRNCPY_FROM_USER 75 select GENERIC_STRNLEN_USER 76 select GENERIC_TIME_VSYSCALL 77 select HAVE_ACPI_APEI if ACPI 78 select HAVE_ACPI_APEI_NMI if ACPI 79 select HAVE_ALIGNED_STRUCT_PAGE if SLUB 80 select HAVE_AOUT if X86_32 81 select HAVE_ARCH_AUDITSYSCALL 82 select HAVE_ARCH_HUGE_VMAP if X86_64 || X86_PAE 83 select HAVE_ARCH_JUMP_LABEL 84 select HAVE_ARCH_KASAN if X86_64 && SPARSEMEM_VMEMMAP 85 select HAVE_ARCH_KGDB 86 select HAVE_ARCH_KMEMCHECK 87 select HAVE_ARCH_MMAP_RND_BITS if MMU 88 select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT 89 select HAVE_ARCH_SECCOMP_FILTER 90 select HAVE_ARCH_SOFT_DIRTY if X86_64 91 select HAVE_ARCH_TRACEHOOK 92 select HAVE_ARCH_TRANSPARENT_HUGEPAGE 93 select HAVE_BPF_JIT if X86_64 94 select HAVE_CC_STACKPROTECTOR 95 select HAVE_CMPXCHG_DOUBLE 96 select HAVE_CMPXCHG_LOCAL 97 select HAVE_CONTEXT_TRACKING if X86_64 98 select HAVE_COPY_THREAD_TLS 99 select HAVE_C_RECORDMCOUNT 100 select HAVE_DEBUG_KMEMLEAK 101 select HAVE_DEBUG_STACKOVERFLOW 102 select HAVE_DMA_API_DEBUG 103 select HAVE_DMA_CONTIGUOUS 104 select HAVE_DYNAMIC_FTRACE 105 select HAVE_DYNAMIC_FTRACE_WITH_REGS 106 select HAVE_EFFICIENT_UNALIGNED_ACCESS 107 select HAVE_FENTRY if X86_64 108 select HAVE_FTRACE_MCOUNT_RECORD 109 select HAVE_FUNCTION_GRAPH_FP_TEST 110 select HAVE_FUNCTION_GRAPH_TRACER 111 select HAVE_FUNCTION_TRACER 112 select HAVE_GENERIC_DMA_COHERENT if X86_32 113 select HAVE_HW_BREAKPOINT 114 select HAVE_IDE 115 select HAVE_IOREMAP_PROT 116 select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64 117 select HAVE_IRQ_TIME_ACCOUNTING 118 select HAVE_KERNEL_BZIP2 119 select HAVE_KERNEL_GZIP 120 select HAVE_KERNEL_LZ4 121 select HAVE_KERNEL_LZMA 122 select HAVE_KERNEL_LZO 123 select HAVE_KERNEL_XZ 124 select HAVE_KPROBES 125 select HAVE_KPROBES_ON_FTRACE 126 select HAVE_KRETPROBES 127 select HAVE_KVM 128 select HAVE_LIVEPATCH if X86_64 129 select HAVE_MEMBLOCK 130 select HAVE_MEMBLOCK_NODE_MAP 131 select HAVE_MIXED_BREAKPOINTS_REGS 132 select HAVE_OPROFILE 133 select HAVE_OPTPROBES 134 select HAVE_PCSPKR_PLATFORM 135 select HAVE_PERF_EVENTS 136 select HAVE_PERF_EVENTS_NMI 137 select HAVE_PERF_REGS 138 select HAVE_PERF_USER_STACK_DUMP 139 select HAVE_REGS_AND_STACK_ACCESS_API 140 select HAVE_SYSCALL_TRACEPOINTS 141 select HAVE_UID16 if X86_32 || IA32_EMULATION 142 select HAVE_UNSTABLE_SCHED_CLOCK 143 select HAVE_USER_RETURN_NOTIFIER 144 select IRQ_FORCED_THREADING 145 select MODULES_USE_ELF_RELA if X86_64 146 select MODULES_USE_ELF_REL if X86_32 147 select OLD_SIGACTION if X86_32 148 select OLD_SIGSUSPEND3 if X86_32 || IA32_EMULATION 149 select PERF_EVENTS 150 select RTC_LIB 151 select SPARSE_IRQ 152 select SRCU 153 select SYSCTL_EXCEPTION_TRACE 154 select USER_STACKTRACE_SUPPORT 155 select VIRT_TO_BUS 156 select X86_DEV_DMA_OPS if X86_64 157 select X86_FEATURE_NAMES if PROC_FS 158 159config INSTRUCTION_DECODER 160 def_bool y 161 depends on KPROBES || PERF_EVENTS || UPROBES 162 163config PERF_EVENTS_INTEL_UNCORE 164 def_bool y 165 depends on PERF_EVENTS && CPU_SUP_INTEL && PCI 166 167config OUTPUT_FORMAT 168 string 169 default "elf32-i386" if X86_32 170 default "elf64-x86-64" if X86_64 171 172config ARCH_DEFCONFIG 173 string 174 default "arch/x86/configs/i386_defconfig" if X86_32 175 default "arch/x86/configs/x86_64_defconfig" if X86_64 176 177config LOCKDEP_SUPPORT 178 def_bool y 179 180config STACKTRACE_SUPPORT 181 def_bool y 182 183config MMU 184 def_bool y 185 186config ARCH_MMAP_RND_BITS_MIN 187 default 28 if 64BIT 188 default 8 189 190config ARCH_MMAP_RND_BITS_MAX 191 default 32 if 64BIT 192 default 16 193 194config ARCH_MMAP_RND_COMPAT_BITS_MIN 195 default 8 196 197config ARCH_MMAP_RND_COMPAT_BITS_MAX 198 default 16 199 200config SBUS 201 bool 202 203config NEED_DMA_MAP_STATE 204 def_bool y 205 depends on X86_64 || INTEL_IOMMU || DMA_API_DEBUG || SWIOTLB 206 207config NEED_SG_DMA_LENGTH 208 def_bool y 209 210config GENERIC_ISA_DMA 211 def_bool y 212 depends on ISA_DMA_API 213 214config GENERIC_BUG 215 def_bool y 216 depends on BUG 217 select GENERIC_BUG_RELATIVE_POINTERS if X86_64 218 219config GENERIC_BUG_RELATIVE_POINTERS 220 bool 221 222config GENERIC_HWEIGHT 223 def_bool y 224 225config ARCH_MAY_HAVE_PC_FDC 226 def_bool y 227 depends on ISA_DMA_API 228 229config RWSEM_XCHGADD_ALGORITHM 230 def_bool y 231 232config GENERIC_CALIBRATE_DELAY 233 def_bool y 234 235config ARCH_HAS_CPU_RELAX 236 def_bool y 237 238config ARCH_HAS_CACHE_LINE_SIZE 239 def_bool y 240 241config HAVE_SETUP_PER_CPU_AREA 242 def_bool y 243 244config NEED_PER_CPU_EMBED_FIRST_CHUNK 245 def_bool y 246 247config NEED_PER_CPU_PAGE_FIRST_CHUNK 248 def_bool y 249 250config ARCH_HIBERNATION_POSSIBLE 251 def_bool y 252 253config ARCH_SUSPEND_POSSIBLE 254 def_bool y 255 256config ARCH_WANT_HUGE_PMD_SHARE 257 def_bool y 258 259config ARCH_WANT_GENERAL_HUGETLB 260 def_bool y 261 262config ZONE_DMA32 263 def_bool y if X86_64 264 265config AUDIT_ARCH 266 def_bool y if X86_64 267 268config ARCH_SUPPORTS_OPTIMIZED_INLINING 269 def_bool y 270 271config ARCH_SUPPORTS_DEBUG_PAGEALLOC 272 def_bool y 273 274config KASAN_SHADOW_OFFSET 275 hex 276 depends on KASAN 277 default 0xdffffc0000000000 278 279config HAVE_INTEL_TXT 280 def_bool y 281 depends on INTEL_IOMMU && ACPI 282 283config X86_32_SMP 284 def_bool y 285 depends on X86_32 && SMP 286 287config X86_64_SMP 288 def_bool y 289 depends on X86_64 && SMP 290 291config X86_32_LAZY_GS 292 def_bool y 293 depends on X86_32 && !CC_STACKPROTECTOR 294 295config ARCH_HWEIGHT_CFLAGS 296 string 297 default "-fcall-saved-ecx -fcall-saved-edx" if X86_32 298 default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64 299 300config ARCH_SUPPORTS_UPROBES 301 def_bool y 302 303config FIX_EARLYCON_MEM 304 def_bool y 305 306config PGTABLE_LEVELS 307 int 308 default 4 if X86_64 309 default 3 if X86_PAE 310 default 2 311 312source "init/Kconfig" 313source "kernel/Kconfig.freezer" 314 315menu "Processor type and features" 316 317config ZONE_DMA 318 bool "DMA memory allocation support" if EXPERT 319 default y 320 help 321 DMA memory allocation support allows devices with less than 32-bit 322 addressing to allocate within the first 16MB of address space. 323 Disable if no such devices will be used. 324 325 If unsure, say Y. 326 327config SMP 328 bool "Symmetric multi-processing support" 329 ---help--- 330 This enables support for systems with more than one CPU. If you have 331 a system with only one CPU, say N. If you have a system with more 332 than one CPU, say Y. 333 334 If you say N here, the kernel will run on uni- and multiprocessor 335 machines, but will use only one CPU of a multiprocessor machine. If 336 you say Y here, the kernel will run on many, but not all, 337 uniprocessor machines. On a uniprocessor machine, the kernel 338 will run faster if you say N here. 339 340 Note that if you say Y here and choose architecture "586" or 341 "Pentium" under "Processor family", the kernel will not work on 486 342 architectures. Similarly, multiprocessor kernels for the "PPro" 343 architecture may not work on all Pentium based boards. 344 345 People using multiprocessor machines who say Y here should also say 346 Y to "Enhanced Real Time Clock Support", below. The "Advanced Power 347 Management" code will be disabled if you say Y here. 348 349 See also <file:Documentation/x86/i386/IO-APIC.txt>, 350 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at 351 <http://www.tldp.org/docs.html#howto>. 352 353 If you don't know what to do here, say N. 354 355config X86_FEATURE_NAMES 356 bool "Processor feature human-readable names" if EMBEDDED 357 default y 358 ---help--- 359 This option compiles in a table of x86 feature bits and corresponding 360 names. This is required to support /proc/cpuinfo and a few kernel 361 messages. You can disable this to save space, at the expense of 362 making those few kernel messages show numeric feature bits instead. 363 364 If in doubt, say Y. 365 366config X86_FAST_FEATURE_TESTS 367 bool "Fast CPU feature tests" if EMBEDDED 368 default y 369 ---help--- 370 Some fast-paths in the kernel depend on the capabilities of the CPU. 371 Say Y here for the kernel to patch in the appropriate code at runtime 372 based on the capabilities of the CPU. The infrastructure for patching 373 code at runtime takes up some additional space; space-constrained 374 embedded systems may wish to say N here to produce smaller, slightly 375 slower code. 376 377config X86_X2APIC 378 bool "Support x2apic" 379 depends on X86_LOCAL_APIC && X86_64 && (IRQ_REMAP || HYPERVISOR_GUEST) 380 ---help--- 381 This enables x2apic support on CPUs that have this feature. 382 383 This allows 32-bit apic IDs (so it can support very large systems), 384 and accesses the local apic via MSRs not via mmio. 385 386 If you don't know what to do here, say N. 387 388config X86_MPPARSE 389 bool "Enable MPS table" if ACPI || SFI 390 default y 391 depends on X86_LOCAL_APIC 392 ---help--- 393 For old smp systems that do not have proper acpi support. Newer systems 394 (esp with 64bit cpus) with acpi support, MADT and DSDT will override it 395 396config X86_BIGSMP 397 bool "Support for big SMP systems with more than 8 CPUs" 398 depends on X86_32 && SMP 399 ---help--- 400 This option is needed for the systems that have more than 8 CPUs 401 402config GOLDFISH 403 def_bool y 404 depends on X86_GOLDFISH 405 406if X86_32 407config X86_EXTENDED_PLATFORM 408 bool "Support for extended (non-PC) x86 platforms" 409 default y 410 ---help--- 411 If you disable this option then the kernel will only support 412 standard PC platforms. (which covers the vast majority of 413 systems out there.) 414 415 If you enable this option then you'll be able to select support 416 for the following (non-PC) 32 bit x86 platforms: 417 Goldfish (Android emulator) 418 AMD Elan 419 RDC R-321x SoC 420 SGI 320/540 (Visual Workstation) 421 STA2X11-based (e.g. Northville) 422 Moorestown MID devices 423 424 If you have one of these systems, or if you want to build a 425 generic distribution kernel, say Y here - otherwise say N. 426endif 427 428if X86_64 429config X86_EXTENDED_PLATFORM 430 bool "Support for extended (non-PC) x86 platforms" 431 default y 432 ---help--- 433 If you disable this option then the kernel will only support 434 standard PC platforms. (which covers the vast majority of 435 systems out there.) 436 437 If you enable this option then you'll be able to select support 438 for the following (non-PC) 64 bit x86 platforms: 439 Numascale NumaChip 440 ScaleMP vSMP 441 SGI Ultraviolet 442 443 If you have one of these systems, or if you want to build a 444 generic distribution kernel, say Y here - otherwise say N. 445endif 446# This is an alphabetically sorted list of 64 bit extended platforms 447# Please maintain the alphabetic order if and when there are additions 448config X86_NUMACHIP 449 bool "Numascale NumaChip" 450 depends on X86_64 451 depends on X86_EXTENDED_PLATFORM 452 depends on NUMA 453 depends on SMP 454 depends on X86_X2APIC 455 depends on PCI_MMCONFIG 456 ---help--- 457 Adds support for Numascale NumaChip large-SMP systems. Needed to 458 enable more than ~168 cores. 459 If you don't have one of these, you should say N here. 460 461config X86_VSMP 462 bool "ScaleMP vSMP" 463 select HYPERVISOR_GUEST 464 select PARAVIRT 465 depends on X86_64 && PCI 466 depends on X86_EXTENDED_PLATFORM 467 depends on SMP 468 ---help--- 469 Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is 470 supposed to run on these EM64T-based machines. Only choose this option 471 if you have one of these machines. 472 473config X86_UV 474 bool "SGI Ultraviolet" 475 depends on X86_64 476 depends on X86_EXTENDED_PLATFORM 477 depends on NUMA 478 depends on EFI 479 depends on X86_X2APIC 480 depends on PCI 481 ---help--- 482 This option is needed in order to support SGI Ultraviolet systems. 483 If you don't have one of these, you should say N here. 484 485# Following is an alphabetically sorted list of 32 bit extended platforms 486# Please maintain the alphabetic order if and when there are additions 487 488config X86_GOLDFISH 489 bool "Goldfish (Virtual Platform)" 490 depends on X86_EXTENDED_PLATFORM 491 ---help--- 492 Enable support for the Goldfish virtual platform used primarily 493 for Android development. Unless you are building for the Android 494 Goldfish emulator say N here. 495 496config X86_INTEL_CE 497 bool "CE4100 TV platform" 498 depends on PCI 499 depends on PCI_GODIRECT 500 depends on X86_IO_APIC 501 depends on X86_32 502 depends on X86_EXTENDED_PLATFORM 503 select X86_REBOOTFIXUPS 504 select OF 505 select OF_EARLY_FLATTREE 506 ---help--- 507 Select for the Intel CE media processor (CE4100) SOC. 508 This option compiles in support for the CE4100 SOC for settop 509 boxes and media devices. 510 511config X86_INTEL_MID 512 bool "Intel MID platform support" 513 depends on X86_EXTENDED_PLATFORM 514 depends on X86_PLATFORM_DEVICES 515 depends on PCI 516 depends on X86_64 || (PCI_GOANY && X86_32) 517 depends on X86_IO_APIC 518 select SFI 519 select I2C 520 select DW_APB_TIMER 521 select APB_TIMER 522 select INTEL_SCU_IPC 523 select MFD_INTEL_MSIC 524 ---help--- 525 Select to build a kernel capable of supporting Intel MID (Mobile 526 Internet Device) platform systems which do not have the PCI legacy 527 interfaces. If you are building for a PC class system say N here. 528 529 Intel MID platforms are based on an Intel processor and chipset which 530 consume less power than most of the x86 derivatives. 531 532config X86_INTEL_QUARK 533 bool "Intel Quark platform support" 534 depends on X86_32 535 depends on X86_EXTENDED_PLATFORM 536 depends on X86_PLATFORM_DEVICES 537 depends on X86_TSC 538 depends on PCI 539 depends on PCI_GOANY 540 depends on X86_IO_APIC 541 select IOSF_MBI 542 select INTEL_IMR 543 select COMMON_CLK 544 ---help--- 545 Select to include support for Quark X1000 SoC. 546 Say Y here if you have a Quark based system such as the Arduino 547 compatible Intel Galileo. 548 549config X86_INTEL_LPSS 550 bool "Intel Low Power Subsystem Support" 551 depends on X86 && ACPI 552 select COMMON_CLK 553 select PINCTRL 554 select IOSF_MBI 555 ---help--- 556 Select to build support for Intel Low Power Subsystem such as 557 found on Intel Lynxpoint PCH. Selecting this option enables 558 things like clock tree (common clock framework) and pincontrol 559 which are needed by the LPSS peripheral drivers. 560 561config X86_AMD_PLATFORM_DEVICE 562 bool "AMD ACPI2Platform devices support" 563 depends on ACPI 564 select COMMON_CLK 565 select PINCTRL 566 ---help--- 567 Select to interpret AMD specific ACPI device to platform device 568 such as I2C, UART, GPIO found on AMD Carrizo and later chipsets. 569 I2C and UART depend on COMMON_CLK to set clock. GPIO driver is 570 implemented under PINCTRL subsystem. 571 572config IOSF_MBI 573 tristate "Intel SoC IOSF Sideband support for SoC platforms" 574 depends on PCI 575 ---help--- 576 This option enables sideband register access support for Intel SoC 577 platforms. On these platforms the IOSF sideband is used in lieu of 578 MSR's for some register accesses, mostly but not limited to thermal 579 and power. Drivers may query the availability of this device to 580 determine if they need the sideband in order to work on these 581 platforms. The sideband is available on the following SoC products. 582 This list is not meant to be exclusive. 583 - BayTrail 584 - Braswell 585 - Quark 586 587 You should say Y if you are running a kernel on one of these SoC's. 588 589config IOSF_MBI_DEBUG 590 bool "Enable IOSF sideband access through debugfs" 591 depends on IOSF_MBI && DEBUG_FS 592 ---help--- 593 Select this option to expose the IOSF sideband access registers (MCR, 594 MDR, MCRX) through debugfs to write and read register information from 595 different units on the SoC. This is most useful for obtaining device 596 state information for debug and analysis. As this is a general access 597 mechanism, users of this option would have specific knowledge of the 598 device they want to access. 599 600 If you don't require the option or are in doubt, say N. 601 602config X86_RDC321X 603 bool "RDC R-321x SoC" 604 depends on X86_32 605 depends on X86_EXTENDED_PLATFORM 606 select M486 607 select X86_REBOOTFIXUPS 608 ---help--- 609 This option is needed for RDC R-321x system-on-chip, also known 610 as R-8610-(G). 611 If you don't have one of these chips, you should say N here. 612 613config X86_32_NON_STANDARD 614 bool "Support non-standard 32-bit SMP architectures" 615 depends on X86_32 && SMP 616 depends on X86_EXTENDED_PLATFORM 617 ---help--- 618 This option compiles in the bigsmp and STA2X11 default 619 subarchitectures. It is intended for a generic binary 620 kernel. If you select them all, kernel will probe it one by 621 one and will fallback to default. 622 623# Alphabetically sorted list of Non standard 32 bit platforms 624 625config X86_SUPPORTS_MEMORY_FAILURE 626 def_bool y 627 # MCE code calls memory_failure(): 628 depends on X86_MCE 629 # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags: 630 # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: 631 depends on X86_64 || !SPARSEMEM 632 select ARCH_SUPPORTS_MEMORY_FAILURE 633 634config STA2X11 635 bool "STA2X11 Companion Chip Support" 636 depends on X86_32_NON_STANDARD && PCI 637 select X86_DEV_DMA_OPS 638 select X86_DMA_REMAP 639 select SWIOTLB 640 select MFD_STA2X11 641 select ARCH_REQUIRE_GPIOLIB 642 default n 643 ---help--- 644 This adds support for boards based on the STA2X11 IO-Hub, 645 a.k.a. "ConneXt". The chip is used in place of the standard 646 PC chipset, so all "standard" peripherals are missing. If this 647 option is selected the kernel will still be able to boot on 648 standard PC machines. 649 650config X86_32_IRIS 651 tristate "Eurobraille/Iris poweroff module" 652 depends on X86_32 653 ---help--- 654 The Iris machines from EuroBraille do not have APM or ACPI support 655 to shut themselves down properly. A special I/O sequence is 656 needed to do so, which is what this module does at 657 kernel shutdown. 658 659 This is only for Iris machines from EuroBraille. 660 661 If unused, say N. 662 663config SCHED_OMIT_FRAME_POINTER 664 def_bool y 665 prompt "Single-depth WCHAN output" 666 depends on X86 667 ---help--- 668 Calculate simpler /proc/<PID>/wchan values. If this option 669 is disabled then wchan values will recurse back to the 670 caller function. This provides more accurate wchan values, 671 at the expense of slightly more scheduling overhead. 672 673 If in doubt, say "Y". 674 675menuconfig HYPERVISOR_GUEST 676 bool "Linux guest support" 677 ---help--- 678 Say Y here to enable options for running Linux under various hyper- 679 visors. This option enables basic hypervisor detection and platform 680 setup. 681 682 If you say N, all options in this submenu will be skipped and 683 disabled, and Linux guest support won't be built in. 684 685if HYPERVISOR_GUEST 686 687config PARAVIRT 688 bool "Enable paravirtualization code" 689 ---help--- 690 This changes the kernel so it can modify itself when it is run 691 under a hypervisor, potentially improving performance significantly 692 over full virtualization. However, when run without a hypervisor 693 the kernel is theoretically slower and slightly larger. 694 695config PARAVIRT_DEBUG 696 bool "paravirt-ops debugging" 697 depends on PARAVIRT && DEBUG_KERNEL 698 ---help--- 699 Enable to debug paravirt_ops internals. Specifically, BUG if 700 a paravirt_op is missing when it is called. 701 702config PARAVIRT_SPINLOCKS 703 bool "Paravirtualization layer for spinlocks" 704 depends on PARAVIRT && SMP 705 select UNINLINE_SPIN_UNLOCK if !QUEUED_SPINLOCKS 706 ---help--- 707 Paravirtualized spinlocks allow a pvops backend to replace the 708 spinlock implementation with something virtualization-friendly 709 (for example, block the virtual CPU rather than spinning). 710 711 It has a minimal impact on native kernels and gives a nice performance 712 benefit on paravirtualized KVM / Xen kernels. 713 714 If you are unsure how to answer this question, answer Y. 715 716config QUEUED_LOCK_STAT 717 bool "Paravirt queued spinlock statistics" 718 depends on PARAVIRT_SPINLOCKS && DEBUG_FS && QUEUED_SPINLOCKS 719 ---help--- 720 Enable the collection of statistical data on the slowpath 721 behavior of paravirtualized queued spinlocks and report 722 them on debugfs. 723 724source "arch/x86/xen/Kconfig" 725 726config KVM_GUEST 727 bool "KVM Guest support (including kvmclock)" 728 depends on PARAVIRT 729 select PARAVIRT_CLOCK 730 default y 731 ---help--- 732 This option enables various optimizations for running under the KVM 733 hypervisor. It includes a paravirtualized clock, so that instead 734 of relying on a PIT (or probably other) emulation by the 735 underlying device model, the host provides the guest with 736 timing infrastructure such as time of day, and system time 737 738config KVM_DEBUG_FS 739 bool "Enable debug information for KVM Guests in debugfs" 740 depends on KVM_GUEST && DEBUG_FS 741 default n 742 ---help--- 743 This option enables collection of various statistics for KVM guest. 744 Statistics are displayed in debugfs filesystem. Enabling this option 745 may incur significant overhead. 746 747source "arch/x86/lguest/Kconfig" 748 749config PARAVIRT_TIME_ACCOUNTING 750 bool "Paravirtual steal time accounting" 751 depends on PARAVIRT 752 default n 753 ---help--- 754 Select this option to enable fine granularity task steal time 755 accounting. Time spent executing other tasks in parallel with 756 the current vCPU is discounted from the vCPU power. To account for 757 that, there can be a small performance impact. 758 759 If in doubt, say N here. 760 761config PARAVIRT_CLOCK 762 bool 763 764endif #HYPERVISOR_GUEST 765 766config NO_BOOTMEM 767 def_bool y 768 769source "arch/x86/Kconfig.cpu" 770 771config HPET_TIMER 772 def_bool X86_64 773 prompt "HPET Timer Support" if X86_32 774 ---help--- 775 Use the IA-PC HPET (High Precision Event Timer) to manage 776 time in preference to the PIT and RTC, if a HPET is 777 present. 778 HPET is the next generation timer replacing legacy 8254s. 779 The HPET provides a stable time base on SMP 780 systems, unlike the TSC, but it is more expensive to access, 781 as it is off-chip. The interface used is documented 782 in the HPET spec, revision 1. 783 784 You can safely choose Y here. However, HPET will only be 785 activated if the platform and the BIOS support this feature. 786 Otherwise the 8254 will be used for timing services. 787 788 Choose N to continue using the legacy 8254 timer. 789 790config HPET_EMULATE_RTC 791 def_bool y 792 depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y) 793 794config APB_TIMER 795 def_bool y if X86_INTEL_MID 796 prompt "Intel MID APB Timer Support" if X86_INTEL_MID 797 select DW_APB_TIMER 798 depends on X86_INTEL_MID && SFI 799 help 800 APB timer is the replacement for 8254, HPET on X86 MID platforms. 801 The APBT provides a stable time base on SMP 802 systems, unlike the TSC, but it is more expensive to access, 803 as it is off-chip. APB timers are always running regardless of CPU 804 C states, they are used as per CPU clockevent device when possible. 805 806# Mark as expert because too many people got it wrong. 807# The code disables itself when not needed. 808config DMI 809 default y 810 select DMI_SCAN_MACHINE_NON_EFI_FALLBACK 811 bool "Enable DMI scanning" if EXPERT 812 ---help--- 813 Enabled scanning of DMI to identify machine quirks. Say Y 814 here unless you have verified that your setup is not 815 affected by entries in the DMI blacklist. Required by PNP 816 BIOS code. 817 818config GART_IOMMU 819 bool "Old AMD GART IOMMU support" 820 select SWIOTLB 821 depends on X86_64 && PCI && AMD_NB 822 ---help--- 823 Provides a driver for older AMD Athlon64/Opteron/Turion/Sempron 824 GART based hardware IOMMUs. 825 826 The GART supports full DMA access for devices with 32-bit access 827 limitations, on systems with more than 3 GB. This is usually needed 828 for USB, sound, many IDE/SATA chipsets and some other devices. 829 830 Newer systems typically have a modern AMD IOMMU, supported via 831 the CONFIG_AMD_IOMMU=y config option. 832 833 In normal configurations this driver is only active when needed: 834 there's more than 3 GB of memory and the system contains a 835 32-bit limited device. 836 837 If unsure, say Y. 838 839config CALGARY_IOMMU 840 bool "IBM Calgary IOMMU support" 841 select SWIOTLB 842 depends on X86_64 && PCI 843 ---help--- 844 Support for hardware IOMMUs in IBM's xSeries x366 and x460 845 systems. Needed to run systems with more than 3GB of memory 846 properly with 32-bit PCI devices that do not support DAC 847 (Double Address Cycle). Calgary also supports bus level 848 isolation, where all DMAs pass through the IOMMU. This 849 prevents them from going anywhere except their intended 850 destination. This catches hard-to-find kernel bugs and 851 mis-behaving drivers and devices that do not use the DMA-API 852 properly to set up their DMA buffers. The IOMMU can be 853 turned off at boot time with the iommu=off parameter. 854 Normally the kernel will make the right choice by itself. 855 If unsure, say Y. 856 857config CALGARY_IOMMU_ENABLED_BY_DEFAULT 858 def_bool y 859 prompt "Should Calgary be enabled by default?" 860 depends on CALGARY_IOMMU 861 ---help--- 862 Should Calgary be enabled by default? if you choose 'y', Calgary 863 will be used (if it exists). If you choose 'n', Calgary will not be 864 used even if it exists. If you choose 'n' and would like to use 865 Calgary anyway, pass 'iommu=calgary' on the kernel command line. 866 If unsure, say Y. 867 868# need this always selected by IOMMU for the VIA workaround 869config SWIOTLB 870 def_bool y if X86_64 871 ---help--- 872 Support for software bounce buffers used on x86-64 systems 873 which don't have a hardware IOMMU. Using this PCI devices 874 which can only access 32-bits of memory can be used on systems 875 with more than 3 GB of memory. 876 If unsure, say Y. 877 878config IOMMU_HELPER 879 def_bool y 880 depends on CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU 881 882config MAXSMP 883 bool "Enable Maximum number of SMP Processors and NUMA Nodes" 884 depends on X86_64 && SMP && DEBUG_KERNEL 885 select CPUMASK_OFFSTACK 886 ---help--- 887 Enable maximum number of CPUS and NUMA Nodes for this architecture. 888 If unsure, say N. 889 890config NR_CPUS 891 int "Maximum number of CPUs" if SMP && !MAXSMP 892 range 2 8 if SMP && X86_32 && !X86_BIGSMP 893 range 2 512 if SMP && !MAXSMP && !CPUMASK_OFFSTACK 894 range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64 895 default "1" if !SMP 896 default "8192" if MAXSMP 897 default "32" if SMP && X86_BIGSMP 898 default "8" if SMP && X86_32 899 default "64" if SMP 900 ---help--- 901 This allows you to specify the maximum number of CPUs which this 902 kernel will support. If CPUMASK_OFFSTACK is enabled, the maximum 903 supported value is 8192, otherwise the maximum value is 512. The 904 minimum value which makes sense is 2. 905 906 This is purely to save memory - each supported CPU adds 907 approximately eight kilobytes to the kernel image. 908 909config SCHED_SMT 910 bool "SMT (Hyperthreading) scheduler support" 911 depends on SMP 912 ---help--- 913 SMT scheduler support improves the CPU scheduler's decision making 914 when dealing with Intel Pentium 4 chips with HyperThreading at a 915 cost of slightly increased overhead in some places. If unsure say 916 N here. 917 918config SCHED_MC 919 def_bool y 920 prompt "Multi-core scheduler support" 921 depends on SMP 922 ---help--- 923 Multi-core scheduler support improves the CPU scheduler's decision 924 making when dealing with multi-core CPU chips at a cost of slightly 925 increased overhead in some places. If unsure say N here. 926 927source "kernel/Kconfig.preempt" 928 929config UP_LATE_INIT 930 def_bool y 931 depends on !SMP && X86_LOCAL_APIC 932 933config X86_UP_APIC 934 bool "Local APIC support on uniprocessors" if !PCI_MSI 935 default PCI_MSI 936 depends on X86_32 && !SMP && !X86_32_NON_STANDARD 937 ---help--- 938 A local APIC (Advanced Programmable Interrupt Controller) is an 939 integrated interrupt controller in the CPU. If you have a single-CPU 940 system which has a processor with a local APIC, you can say Y here to 941 enable and use it. If you say Y here even though your machine doesn't 942 have a local APIC, then the kernel will still run with no slowdown at 943 all. The local APIC supports CPU-generated self-interrupts (timer, 944 performance counters), and the NMI watchdog which detects hard 945 lockups. 946 947config X86_UP_IOAPIC 948 bool "IO-APIC support on uniprocessors" 949 depends on X86_UP_APIC 950 ---help--- 951 An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an 952 SMP-capable replacement for PC-style interrupt controllers. Most 953 SMP systems and many recent uniprocessor systems have one. 954 955 If you have a single-CPU system with an IO-APIC, you can say Y here 956 to use it. If you say Y here even though your machine doesn't have 957 an IO-APIC, then the kernel will still run with no slowdown at all. 958 959config X86_LOCAL_APIC 960 def_bool y 961 depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI 962 select IRQ_DOMAIN_HIERARCHY 963 select PCI_MSI_IRQ_DOMAIN if PCI_MSI 964 965config X86_IO_APIC 966 def_bool y 967 depends on X86_LOCAL_APIC || X86_UP_IOAPIC 968 969config X86_REROUTE_FOR_BROKEN_BOOT_IRQS 970 bool "Reroute for broken boot IRQs" 971 depends on X86_IO_APIC 972 ---help--- 973 This option enables a workaround that fixes a source of 974 spurious interrupts. This is recommended when threaded 975 interrupt handling is used on systems where the generation of 976 superfluous "boot interrupts" cannot be disabled. 977 978 Some chipsets generate a legacy INTx "boot IRQ" when the IRQ 979 entry in the chipset's IO-APIC is masked (as, e.g. the RT 980 kernel does during interrupt handling). On chipsets where this 981 boot IRQ generation cannot be disabled, this workaround keeps 982 the original IRQ line masked so that only the equivalent "boot 983 IRQ" is delivered to the CPUs. The workaround also tells the 984 kernel to set up the IRQ handler on the boot IRQ line. In this 985 way only one interrupt is delivered to the kernel. Otherwise 986 the spurious second interrupt may cause the kernel to bring 987 down (vital) interrupt lines. 988 989 Only affects "broken" chipsets. Interrupt sharing may be 990 increased on these systems. 991 992config X86_MCE 993 bool "Machine Check / overheating reporting" 994 select GENERIC_ALLOCATOR 995 default y 996 ---help--- 997 Machine Check support allows the processor to notify the 998 kernel if it detects a problem (e.g. overheating, data corruption). 999 The action the kernel takes depends on the severity of the problem, 1000 ranging from warning messages to halting the machine. 1001 1002config X86_MCE_INTEL 1003 def_bool y 1004 prompt "Intel MCE features" 1005 depends on X86_MCE && X86_LOCAL_APIC 1006 ---help--- 1007 Additional support for intel specific MCE features such as 1008 the thermal monitor. 1009 1010config X86_MCE_AMD 1011 def_bool y 1012 prompt "AMD MCE features" 1013 depends on X86_MCE && X86_LOCAL_APIC 1014 ---help--- 1015 Additional support for AMD specific MCE features such as 1016 the DRAM Error Threshold. 1017 1018config X86_ANCIENT_MCE 1019 bool "Support for old Pentium 5 / WinChip machine checks" 1020 depends on X86_32 && X86_MCE 1021 ---help--- 1022 Include support for machine check handling on old Pentium 5 or WinChip 1023 systems. These typically need to be enabled explicitly on the command 1024 line. 1025 1026config X86_MCE_THRESHOLD 1027 depends on X86_MCE_AMD || X86_MCE_INTEL 1028 def_bool y 1029 1030config X86_MCE_INJECT 1031 depends on X86_MCE 1032 tristate "Machine check injector support" 1033 ---help--- 1034 Provide support for injecting machine checks for testing purposes. 1035 If you don't know what a machine check is and you don't do kernel 1036 QA it is safe to say n. 1037 1038config X86_THERMAL_VECTOR 1039 def_bool y 1040 depends on X86_MCE_INTEL 1041 1042config X86_LEGACY_VM86 1043 bool "Legacy VM86 support" 1044 default n 1045 depends on X86_32 1046 ---help--- 1047 This option allows user programs to put the CPU into V8086 1048 mode, which is an 80286-era approximation of 16-bit real mode. 1049 1050 Some very old versions of X and/or vbetool require this option 1051 for user mode setting. Similarly, DOSEMU will use it if 1052 available to accelerate real mode DOS programs. However, any 1053 recent version of DOSEMU, X, or vbetool should be fully 1054 functional even without kernel VM86 support, as they will all 1055 fall back to software emulation. Nevertheless, if you are using 1056 a 16-bit DOS program where 16-bit performance matters, vm86 1057 mode might be faster than emulation and you might want to 1058 enable this option. 1059 1060 Note that any app that works on a 64-bit kernel is unlikely to 1061 need this option, as 64-bit kernels don't, and can't, support 1062 V8086 mode. This option is also unrelated to 16-bit protected 1063 mode and is not needed to run most 16-bit programs under Wine. 1064 1065 Enabling this option increases the complexity of the kernel 1066 and slows down exception handling a tiny bit. 1067 1068 If unsure, say N here. 1069 1070config VM86 1071 bool 1072 default X86_LEGACY_VM86 1073 1074config X86_16BIT 1075 bool "Enable support for 16-bit segments" if EXPERT 1076 default y 1077 depends on MODIFY_LDT_SYSCALL 1078 ---help--- 1079 This option is required by programs like Wine to run 16-bit 1080 protected mode legacy code on x86 processors. Disabling 1081 this option saves about 300 bytes on i386, or around 6K text 1082 plus 16K runtime memory on x86-64, 1083 1084config X86_ESPFIX32 1085 def_bool y 1086 depends on X86_16BIT && X86_32 1087 1088config X86_ESPFIX64 1089 def_bool y 1090 depends on X86_16BIT && X86_64 1091 1092config X86_VSYSCALL_EMULATION 1093 bool "Enable vsyscall emulation" if EXPERT 1094 default y 1095 depends on X86_64 1096 ---help--- 1097 This enables emulation of the legacy vsyscall page. Disabling 1098 it is roughly equivalent to booting with vsyscall=none, except 1099 that it will also disable the helpful warning if a program 1100 tries to use a vsyscall. With this option set to N, offending 1101 programs will just segfault, citing addresses of the form 1102 0xffffffffff600?00. 1103 1104 This option is required by many programs built before 2013, and 1105 care should be used even with newer programs if set to N. 1106 1107 Disabling this option saves about 7K of kernel size and 1108 possibly 4K of additional runtime pagetable memory. 1109 1110config TOSHIBA 1111 tristate "Toshiba Laptop support" 1112 depends on X86_32 1113 ---help--- 1114 This adds a driver to safely access the System Management Mode of 1115 the CPU on Toshiba portables with a genuine Toshiba BIOS. It does 1116 not work on models with a Phoenix BIOS. The System Management Mode 1117 is used to set the BIOS and power saving options on Toshiba portables. 1118 1119 For information on utilities to make use of this driver see the 1120 Toshiba Linux utilities web site at: 1121 <http://www.buzzard.org.uk/toshiba/>. 1122 1123 Say Y if you intend to run this kernel on a Toshiba portable. 1124 Say N otherwise. 1125 1126config I8K 1127 tristate "Dell i8k legacy laptop support" 1128 select HWMON 1129 select SENSORS_DELL_SMM 1130 ---help--- 1131 This option enables legacy /proc/i8k userspace interface in hwmon 1132 dell-smm-hwmon driver. Character file /proc/i8k reports bios version, 1133 temperature and allows controlling fan speeds of Dell laptops via 1134 System Management Mode. For old Dell laptops (like Dell Inspiron 8000) 1135 it reports also power and hotkey status. For fan speed control is 1136 needed userspace package i8kutils. 1137 1138 Say Y if you intend to run this kernel on old Dell laptops or want to 1139 use userspace package i8kutils. 1140 Say N otherwise. 1141 1142config X86_REBOOTFIXUPS 1143 bool "Enable X86 board specific fixups for reboot" 1144 depends on X86_32 1145 ---help--- 1146 This enables chipset and/or board specific fixups to be done 1147 in order to get reboot to work correctly. This is only needed on 1148 some combinations of hardware and BIOS. The symptom, for which 1149 this config is intended, is when reboot ends with a stalled/hung 1150 system. 1151 1152 Currently, the only fixup is for the Geode machines using 1153 CS5530A and CS5536 chipsets and the RDC R-321x SoC. 1154 1155 Say Y if you want to enable the fixup. Currently, it's safe to 1156 enable this option even if you don't need it. 1157 Say N otherwise. 1158 1159config MICROCODE 1160 bool "CPU microcode loading support" 1161 default y 1162 depends on CPU_SUP_AMD || CPU_SUP_INTEL 1163 depends on BLK_DEV_INITRD 1164 select FW_LOADER 1165 ---help--- 1166 1167 If you say Y here, you will be able to update the microcode on 1168 certain Intel and AMD processors. The Intel support is for the 1169 IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4, 1170 Xeon etc. The AMD support is for families 0x10 and later. You will 1171 obviously need the actual microcode binary data itself which is not 1172 shipped with the Linux kernel. 1173 1174 This option selects the general module only, you need to select 1175 at least one vendor specific module as well. 1176 1177 To compile this driver as a module, choose M here: the module 1178 will be called microcode. 1179 1180config MICROCODE_INTEL 1181 bool "Intel microcode loading support" 1182 depends on MICROCODE 1183 default MICROCODE 1184 select FW_LOADER 1185 ---help--- 1186 This options enables microcode patch loading support for Intel 1187 processors. 1188 1189 For the current Intel microcode data package go to 1190 <https://downloadcenter.intel.com> and search for 1191 'Linux Processor Microcode Data File'. 1192 1193config MICROCODE_AMD 1194 bool "AMD microcode loading support" 1195 depends on MICROCODE 1196 select FW_LOADER 1197 ---help--- 1198 If you select this option, microcode patch loading support for AMD 1199 processors will be enabled. 1200 1201config MICROCODE_OLD_INTERFACE 1202 def_bool y 1203 depends on MICROCODE 1204 1205config X86_MSR 1206 tristate "/dev/cpu/*/msr - Model-specific register support" 1207 ---help--- 1208 This device gives privileged processes access to the x86 1209 Model-Specific Registers (MSRs). It is a character device with 1210 major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr. 1211 MSR accesses are directed to a specific CPU on multi-processor 1212 systems. 1213 1214config X86_CPUID 1215 tristate "/dev/cpu/*/cpuid - CPU information support" 1216 ---help--- 1217 This device gives processes access to the x86 CPUID instruction to 1218 be executed on a specific processor. It is a character device 1219 with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to 1220 /dev/cpu/31/cpuid. 1221 1222choice 1223 prompt "High Memory Support" 1224 default HIGHMEM4G 1225 depends on X86_32 1226 1227config NOHIGHMEM 1228 bool "off" 1229 ---help--- 1230 Linux can use up to 64 Gigabytes of physical memory on x86 systems. 1231 However, the address space of 32-bit x86 processors is only 4 1232 Gigabytes large. That means that, if you have a large amount of 1233 physical memory, not all of it can be "permanently mapped" by the 1234 kernel. The physical memory that's not permanently mapped is called 1235 "high memory". 1236 1237 If you are compiling a kernel which will never run on a machine with 1238 more than 1 Gigabyte total physical RAM, answer "off" here (default 1239 choice and suitable for most users). This will result in a "3GB/1GB" 1240 split: 3GB are mapped so that each process sees a 3GB virtual memory 1241 space and the remaining part of the 4GB virtual memory space is used 1242 by the kernel to permanently map as much physical memory as 1243 possible. 1244 1245 If the machine has between 1 and 4 Gigabytes physical RAM, then 1246 answer "4GB" here. 1247 1248 If more than 4 Gigabytes is used then answer "64GB" here. This 1249 selection turns Intel PAE (Physical Address Extension) mode on. 1250 PAE implements 3-level paging on IA32 processors. PAE is fully 1251 supported by Linux, PAE mode is implemented on all recent Intel 1252 processors (Pentium Pro and better). NOTE: If you say "64GB" here, 1253 then the kernel will not boot on CPUs that don't support PAE! 1254 1255 The actual amount of total physical memory will either be 1256 auto detected or can be forced by using a kernel command line option 1257 such as "mem=256M". (Try "man bootparam" or see the documentation of 1258 your boot loader (lilo or loadlin) about how to pass options to the 1259 kernel at boot time.) 1260 1261 If unsure, say "off". 1262 1263config HIGHMEM4G 1264 bool "4GB" 1265 ---help--- 1266 Select this if you have a 32-bit processor and between 1 and 4 1267 gigabytes of physical RAM. 1268 1269config HIGHMEM64G 1270 bool "64GB" 1271 depends on !M486 1272 select X86_PAE 1273 ---help--- 1274 Select this if you have a 32-bit processor and more than 4 1275 gigabytes of physical RAM. 1276 1277endchoice 1278 1279choice 1280 prompt "Memory split" if EXPERT 1281 default VMSPLIT_3G 1282 depends on X86_32 1283 ---help--- 1284 Select the desired split between kernel and user memory. 1285 1286 If the address range available to the kernel is less than the 1287 physical memory installed, the remaining memory will be available 1288 as "high memory". Accessing high memory is a little more costly 1289 than low memory, as it needs to be mapped into the kernel first. 1290 Note that increasing the kernel address space limits the range 1291 available to user programs, making the address space there 1292 tighter. Selecting anything other than the default 3G/1G split 1293 will also likely make your kernel incompatible with binary-only 1294 kernel modules. 1295 1296 If you are not absolutely sure what you are doing, leave this 1297 option alone! 1298 1299 config VMSPLIT_3G 1300 bool "3G/1G user/kernel split" 1301 config VMSPLIT_3G_OPT 1302 depends on !X86_PAE 1303 bool "3G/1G user/kernel split (for full 1G low memory)" 1304 config VMSPLIT_2G 1305 bool "2G/2G user/kernel split" 1306 config VMSPLIT_2G_OPT 1307 depends on !X86_PAE 1308 bool "2G/2G user/kernel split (for full 2G low memory)" 1309 config VMSPLIT_1G 1310 bool "1G/3G user/kernel split" 1311endchoice 1312 1313config PAGE_OFFSET 1314 hex 1315 default 0xB0000000 if VMSPLIT_3G_OPT 1316 default 0x80000000 if VMSPLIT_2G 1317 default 0x78000000 if VMSPLIT_2G_OPT 1318 default 0x40000000 if VMSPLIT_1G 1319 default 0xC0000000 1320 depends on X86_32 1321 1322config HIGHMEM 1323 def_bool y 1324 depends on X86_32 && (HIGHMEM64G || HIGHMEM4G) 1325 1326config X86_PAE 1327 bool "PAE (Physical Address Extension) Support" 1328 depends on X86_32 && !HIGHMEM4G 1329 select SWIOTLB 1330 ---help--- 1331 PAE is required for NX support, and furthermore enables 1332 larger swapspace support for non-overcommit purposes. It 1333 has the cost of more pagetable lookup overhead, and also 1334 consumes more pagetable space per process. 1335 1336config ARCH_PHYS_ADDR_T_64BIT 1337 def_bool y 1338 depends on X86_64 || X86_PAE 1339 1340config ARCH_DMA_ADDR_T_64BIT 1341 def_bool y 1342 depends on X86_64 || HIGHMEM64G 1343 1344config X86_DIRECT_GBPAGES 1345 def_bool y 1346 depends on X86_64 && !DEBUG_PAGEALLOC && !KMEMCHECK 1347 ---help--- 1348 Certain kernel features effectively disable kernel 1349 linear 1 GB mappings (even if the CPU otherwise 1350 supports them), so don't confuse the user by printing 1351 that we have them enabled. 1352 1353# Common NUMA Features 1354config NUMA 1355 bool "Numa Memory Allocation and Scheduler Support" 1356 depends on SMP 1357 depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP) 1358 default y if X86_BIGSMP 1359 ---help--- 1360 Enable NUMA (Non Uniform Memory Access) support. 1361 1362 The kernel will try to allocate memory used by a CPU on the 1363 local memory controller of the CPU and add some more 1364 NUMA awareness to the kernel. 1365 1366 For 64-bit this is recommended if the system is Intel Core i7 1367 (or later), AMD Opteron, or EM64T NUMA. 1368 1369 For 32-bit this is only needed if you boot a 32-bit 1370 kernel on a 64-bit NUMA platform. 1371 1372 Otherwise, you should say N. 1373 1374config AMD_NUMA 1375 def_bool y 1376 prompt "Old style AMD Opteron NUMA detection" 1377 depends on X86_64 && NUMA && PCI 1378 ---help--- 1379 Enable AMD NUMA node topology detection. You should say Y here if 1380 you have a multi processor AMD system. This uses an old method to 1381 read the NUMA configuration directly from the builtin Northbridge 1382 of Opteron. It is recommended to use X86_64_ACPI_NUMA instead, 1383 which also takes priority if both are compiled in. 1384 1385config X86_64_ACPI_NUMA 1386 def_bool y 1387 prompt "ACPI NUMA detection" 1388 depends on X86_64 && NUMA && ACPI && PCI 1389 select ACPI_NUMA 1390 ---help--- 1391 Enable ACPI SRAT based node topology detection. 1392 1393# Some NUMA nodes have memory ranges that span 1394# other nodes. Even though a pfn is valid and 1395# between a node's start and end pfns, it may not 1396# reside on that node. See memmap_init_zone() 1397# for details. 1398config NODES_SPAN_OTHER_NODES 1399 def_bool y 1400 depends on X86_64_ACPI_NUMA 1401 1402config NUMA_EMU 1403 bool "NUMA emulation" 1404 depends on NUMA 1405 ---help--- 1406 Enable NUMA emulation. A flat machine will be split 1407 into virtual nodes when booted with "numa=fake=N", where N is the 1408 number of nodes. This is only useful for debugging. 1409 1410config NODES_SHIFT 1411 int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP 1412 range 1 10 1413 default "10" if MAXSMP 1414 default "6" if X86_64 1415 default "3" 1416 depends on NEED_MULTIPLE_NODES 1417 ---help--- 1418 Specify the maximum number of NUMA Nodes available on the target 1419 system. Increases memory reserved to accommodate various tables. 1420 1421config ARCH_HAVE_MEMORY_PRESENT 1422 def_bool y 1423 depends on X86_32 && DISCONTIGMEM 1424 1425config NEED_NODE_MEMMAP_SIZE 1426 def_bool y 1427 depends on X86_32 && (DISCONTIGMEM || SPARSEMEM) 1428 1429config ARCH_FLATMEM_ENABLE 1430 def_bool y 1431 depends on X86_32 && !NUMA 1432 1433config ARCH_DISCONTIGMEM_ENABLE 1434 def_bool y 1435 depends on NUMA && X86_32 1436 1437config ARCH_DISCONTIGMEM_DEFAULT 1438 def_bool y 1439 depends on NUMA && X86_32 1440 1441config ARCH_SPARSEMEM_ENABLE 1442 def_bool y 1443 depends on X86_64 || NUMA || X86_32 || X86_32_NON_STANDARD 1444 select SPARSEMEM_STATIC if X86_32 1445 select SPARSEMEM_VMEMMAP_ENABLE if X86_64 1446 1447config ARCH_SPARSEMEM_DEFAULT 1448 def_bool y 1449 depends on X86_64 1450 1451config ARCH_SELECT_MEMORY_MODEL 1452 def_bool y 1453 depends on ARCH_SPARSEMEM_ENABLE 1454 1455config ARCH_MEMORY_PROBE 1456 bool "Enable sysfs memory/probe interface" 1457 depends on X86_64 && MEMORY_HOTPLUG 1458 help 1459 This option enables a sysfs memory/probe interface for testing. 1460 See Documentation/memory-hotplug.txt for more information. 1461 If you are unsure how to answer this question, answer N. 1462 1463config ARCH_PROC_KCORE_TEXT 1464 def_bool y 1465 depends on X86_64 && PROC_KCORE 1466 1467config ILLEGAL_POINTER_VALUE 1468 hex 1469 default 0 if X86_32 1470 default 0xdead000000000000 if X86_64 1471 1472source "mm/Kconfig" 1473 1474config X86_PMEM_LEGACY_DEVICE 1475 bool 1476 1477config X86_PMEM_LEGACY 1478 tristate "Support non-standard NVDIMMs and ADR protected memory" 1479 depends on PHYS_ADDR_T_64BIT 1480 depends on BLK_DEV 1481 select X86_PMEM_LEGACY_DEVICE 1482 select LIBNVDIMM 1483 help 1484 Treat memory marked using the non-standard e820 type of 12 as used 1485 by the Intel Sandy Bridge-EP reference BIOS as protected memory. 1486 The kernel will offer these regions to the 'pmem' driver so 1487 they can be used for persistent storage. 1488 1489 Say Y if unsure. 1490 1491config HIGHPTE 1492 bool "Allocate 3rd-level pagetables from highmem" 1493 depends on HIGHMEM 1494 ---help--- 1495 The VM uses one page table entry for each page of physical memory. 1496 For systems with a lot of RAM, this can be wasteful of precious 1497 low memory. Setting this option will put user-space page table 1498 entries in high memory. 1499 1500config X86_CHECK_BIOS_CORRUPTION 1501 bool "Check for low memory corruption" 1502 ---help--- 1503 Periodically check for memory corruption in low memory, which 1504 is suspected to be caused by BIOS. Even when enabled in the 1505 configuration, it is disabled at runtime. Enable it by 1506 setting "memory_corruption_check=1" on the kernel command 1507 line. By default it scans the low 64k of memory every 60 1508 seconds; see the memory_corruption_check_size and 1509 memory_corruption_check_period parameters in 1510 Documentation/kernel-parameters.txt to adjust this. 1511 1512 When enabled with the default parameters, this option has 1513 almost no overhead, as it reserves a relatively small amount 1514 of memory and scans it infrequently. It both detects corruption 1515 and prevents it from affecting the running system. 1516 1517 It is, however, intended as a diagnostic tool; if repeatable 1518 BIOS-originated corruption always affects the same memory, 1519 you can use memmap= to prevent the kernel from using that 1520 memory. 1521 1522config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK 1523 bool "Set the default setting of memory_corruption_check" 1524 depends on X86_CHECK_BIOS_CORRUPTION 1525 default y 1526 ---help--- 1527 Set whether the default state of memory_corruption_check is 1528 on or off. 1529 1530config X86_RESERVE_LOW 1531 int "Amount of low memory, in kilobytes, to reserve for the BIOS" 1532 default 64 1533 range 4 640 1534 ---help--- 1535 Specify the amount of low memory to reserve for the BIOS. 1536 1537 The first page contains BIOS data structures that the kernel 1538 must not use, so that page must always be reserved. 1539 1540 By default we reserve the first 64K of physical RAM, as a 1541 number of BIOSes are known to corrupt that memory range 1542 during events such as suspend/resume or monitor cable 1543 insertion, so it must not be used by the kernel. 1544 1545 You can set this to 4 if you are absolutely sure that you 1546 trust the BIOS to get all its memory reservations and usages 1547 right. If you know your BIOS have problems beyond the 1548 default 64K area, you can set this to 640 to avoid using the 1549 entire low memory range. 1550 1551 If you have doubts about the BIOS (e.g. suspend/resume does 1552 not work or there's kernel crashes after certain hardware 1553 hotplug events) then you might want to enable 1554 X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check 1555 typical corruption patterns. 1556 1557 Leave this to the default value of 64 if you are unsure. 1558 1559config MATH_EMULATION 1560 bool 1561 depends on MODIFY_LDT_SYSCALL 1562 prompt "Math emulation" if X86_32 1563 ---help--- 1564 Linux can emulate a math coprocessor (used for floating point 1565 operations) if you don't have one. 486DX and Pentium processors have 1566 a math coprocessor built in, 486SX and 386 do not, unless you added 1567 a 487DX or 387, respectively. (The messages during boot time can 1568 give you some hints here ["man dmesg"].) Everyone needs either a 1569 coprocessor or this emulation. 1570 1571 If you don't have a math coprocessor, you need to say Y here; if you 1572 say Y here even though you have a coprocessor, the coprocessor will 1573 be used nevertheless. (This behavior can be changed with the kernel 1574 command line option "no387", which comes handy if your coprocessor 1575 is broken. Try "man bootparam" or see the documentation of your boot 1576 loader (lilo or loadlin) about how to pass options to the kernel at 1577 boot time.) This means that it is a good idea to say Y here if you 1578 intend to use this kernel on different machines. 1579 1580 More information about the internals of the Linux math coprocessor 1581 emulation can be found in <file:arch/x86/math-emu/README>. 1582 1583 If you are not sure, say Y; apart from resulting in a 66 KB bigger 1584 kernel, it won't hurt. 1585 1586config MTRR 1587 def_bool y 1588 prompt "MTRR (Memory Type Range Register) support" if EXPERT 1589 ---help--- 1590 On Intel P6 family processors (Pentium Pro, Pentium II and later) 1591 the Memory Type Range Registers (MTRRs) may be used to control 1592 processor access to memory ranges. This is most useful if you have 1593 a video (VGA) card on a PCI or AGP bus. Enabling write-combining 1594 allows bus write transfers to be combined into a larger transfer 1595 before bursting over the PCI/AGP bus. This can increase performance 1596 of image write operations 2.5 times or more. Saying Y here creates a 1597 /proc/mtrr file which may be used to manipulate your processor's 1598 MTRRs. Typically the X server should use this. 1599 1600 This code has a reasonably generic interface so that similar 1601 control registers on other processors can be easily supported 1602 as well: 1603 1604 The Cyrix 6x86, 6x86MX and M II processors have Address Range 1605 Registers (ARRs) which provide a similar functionality to MTRRs. For 1606 these, the ARRs are used to emulate the MTRRs. 1607 The AMD K6-2 (stepping 8 and above) and K6-3 processors have two 1608 MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing 1609 write-combining. All of these processors are supported by this code 1610 and it makes sense to say Y here if you have one of them. 1611 1612 Saying Y here also fixes a problem with buggy SMP BIOSes which only 1613 set the MTRRs for the boot CPU and not for the secondary CPUs. This 1614 can lead to all sorts of problems, so it's good to say Y here. 1615 1616 You can safely say Y even if your machine doesn't have MTRRs, you'll 1617 just add about 9 KB to your kernel. 1618 1619 See <file:Documentation/x86/mtrr.txt> for more information. 1620 1621config MTRR_SANITIZER 1622 def_bool y 1623 prompt "MTRR cleanup support" 1624 depends on MTRR 1625 ---help--- 1626 Convert MTRR layout from continuous to discrete, so X drivers can 1627 add writeback entries. 1628 1629 Can be disabled with disable_mtrr_cleanup on the kernel command line. 1630 The largest mtrr entry size for a continuous block can be set with 1631 mtrr_chunk_size. 1632 1633 If unsure, say Y. 1634 1635config MTRR_SANITIZER_ENABLE_DEFAULT 1636 int "MTRR cleanup enable value (0-1)" 1637 range 0 1 1638 default "0" 1639 depends on MTRR_SANITIZER 1640 ---help--- 1641 Enable mtrr cleanup default value 1642 1643config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT 1644 int "MTRR cleanup spare reg num (0-7)" 1645 range 0 7 1646 default "1" 1647 depends on MTRR_SANITIZER 1648 ---help--- 1649 mtrr cleanup spare entries default, it can be changed via 1650 mtrr_spare_reg_nr=N on the kernel command line. 1651 1652config X86_PAT 1653 def_bool y 1654 prompt "x86 PAT support" if EXPERT 1655 depends on MTRR 1656 ---help--- 1657 Use PAT attributes to setup page level cache control. 1658 1659 PATs are the modern equivalents of MTRRs and are much more 1660 flexible than MTRRs. 1661 1662 Say N here if you see bootup problems (boot crash, boot hang, 1663 spontaneous reboots) or a non-working video driver. 1664 1665 If unsure, say Y. 1666 1667config ARCH_USES_PG_UNCACHED 1668 def_bool y 1669 depends on X86_PAT 1670 1671config ARCH_RANDOM 1672 def_bool y 1673 prompt "x86 architectural random number generator" if EXPERT 1674 ---help--- 1675 Enable the x86 architectural RDRAND instruction 1676 (Intel Bull Mountain technology) to generate random numbers. 1677 If supported, this is a high bandwidth, cryptographically 1678 secure hardware random number generator. 1679 1680config X86_SMAP 1681 def_bool y 1682 prompt "Supervisor Mode Access Prevention" if EXPERT 1683 ---help--- 1684 Supervisor Mode Access Prevention (SMAP) is a security 1685 feature in newer Intel processors. There is a small 1686 performance cost if this enabled and turned on; there is 1687 also a small increase in the kernel size if this is enabled. 1688 1689 If unsure, say Y. 1690 1691config X86_INTEL_MPX 1692 prompt "Intel MPX (Memory Protection Extensions)" 1693 def_bool n 1694 depends on CPU_SUP_INTEL 1695 ---help--- 1696 MPX provides hardware features that can be used in 1697 conjunction with compiler-instrumented code to check 1698 memory references. It is designed to detect buffer 1699 overflow or underflow bugs. 1700 1701 This option enables running applications which are 1702 instrumented or otherwise use MPX. It does not use MPX 1703 itself inside the kernel or to protect the kernel 1704 against bad memory references. 1705 1706 Enabling this option will make the kernel larger: 1707 ~8k of kernel text and 36 bytes of data on a 64-bit 1708 defconfig. It adds a long to the 'mm_struct' which 1709 will increase the kernel memory overhead of each 1710 process and adds some branches to paths used during 1711 exec() and munmap(). 1712 1713 For details, see Documentation/x86/intel_mpx.txt 1714 1715 If unsure, say N. 1716 1717config EFI 1718 bool "EFI runtime service support" 1719 depends on ACPI 1720 select UCS2_STRING 1721 select EFI_RUNTIME_WRAPPERS 1722 ---help--- 1723 This enables the kernel to use EFI runtime services that are 1724 available (such as the EFI variable services). 1725 1726 This option is only useful on systems that have EFI firmware. 1727 In addition, you should use the latest ELILO loader available 1728 at <http://elilo.sourceforge.net> in order to take advantage 1729 of EFI runtime services. However, even with this option, the 1730 resultant kernel should continue to boot on existing non-EFI 1731 platforms. 1732 1733config EFI_STUB 1734 bool "EFI stub support" 1735 depends on EFI && !X86_USE_3DNOW 1736 select RELOCATABLE 1737 ---help--- 1738 This kernel feature allows a bzImage to be loaded directly 1739 by EFI firmware without the use of a bootloader. 1740 1741 See Documentation/efi-stub.txt for more information. 1742 1743config EFI_MIXED 1744 bool "EFI mixed-mode support" 1745 depends on EFI_STUB && X86_64 1746 ---help--- 1747 Enabling this feature allows a 64-bit kernel to be booted 1748 on a 32-bit firmware, provided that your CPU supports 64-bit 1749 mode. 1750 1751 Note that it is not possible to boot a mixed-mode enabled 1752 kernel via the EFI boot stub - a bootloader that supports 1753 the EFI handover protocol must be used. 1754 1755 If unsure, say N. 1756 1757config SECCOMP 1758 def_bool y 1759 prompt "Enable seccomp to safely compute untrusted bytecode" 1760 ---help--- 1761 This kernel feature is useful for number crunching applications 1762 that may need to compute untrusted bytecode during their 1763 execution. By using pipes or other transports made available to 1764 the process as file descriptors supporting the read/write 1765 syscalls, it's possible to isolate those applications in 1766 their own address space using seccomp. Once seccomp is 1767 enabled via prctl(PR_SET_SECCOMP), it cannot be disabled 1768 and the task is only allowed to execute a few safe syscalls 1769 defined by each seccomp mode. 1770 1771 If unsure, say Y. Only embedded should say N here. 1772 1773source kernel/Kconfig.hz 1774 1775config KEXEC 1776 bool "kexec system call" 1777 select KEXEC_CORE 1778 ---help--- 1779 kexec is a system call that implements the ability to shutdown your 1780 current kernel, and to start another kernel. It is like a reboot 1781 but it is independent of the system firmware. And like a reboot 1782 you can start any kernel with it, not just Linux. 1783 1784 The name comes from the similarity to the exec system call. 1785 1786 It is an ongoing process to be certain the hardware in a machine 1787 is properly shutdown, so do not be surprised if this code does not 1788 initially work for you. As of this writing the exact hardware 1789 interface is strongly in flux, so no good recommendation can be 1790 made. 1791 1792config KEXEC_FILE 1793 bool "kexec file based system call" 1794 select KEXEC_CORE 1795 select BUILD_BIN2C 1796 depends on X86_64 1797 depends on CRYPTO=y 1798 depends on CRYPTO_SHA256=y 1799 ---help--- 1800 This is new version of kexec system call. This system call is 1801 file based and takes file descriptors as system call argument 1802 for kernel and initramfs as opposed to list of segments as 1803 accepted by previous system call. 1804 1805config KEXEC_VERIFY_SIG 1806 bool "Verify kernel signature during kexec_file_load() syscall" 1807 depends on KEXEC_FILE 1808 ---help--- 1809 This option makes kernel signature verification mandatory for 1810 the kexec_file_load() syscall. 1811 1812 In addition to that option, you need to enable signature 1813 verification for the corresponding kernel image type being 1814 loaded in order for this to work. 1815 1816config KEXEC_BZIMAGE_VERIFY_SIG 1817 bool "Enable bzImage signature verification support" 1818 depends on KEXEC_VERIFY_SIG 1819 depends on SIGNED_PE_FILE_VERIFICATION 1820 select SYSTEM_TRUSTED_KEYRING 1821 ---help--- 1822 Enable bzImage signature verification support. 1823 1824config CRASH_DUMP 1825 bool "kernel crash dumps" 1826 depends on X86_64 || (X86_32 && HIGHMEM) 1827 ---help--- 1828 Generate crash dump after being started by kexec. 1829 This should be normally only set in special crash dump kernels 1830 which are loaded in the main kernel with kexec-tools into 1831 a specially reserved region and then later executed after 1832 a crash by kdump/kexec. The crash dump kernel must be compiled 1833 to a memory address not used by the main kernel or BIOS using 1834 PHYSICAL_START, or it must be built as a relocatable image 1835 (CONFIG_RELOCATABLE=y). 1836 For more details see Documentation/kdump/kdump.txt 1837 1838config KEXEC_JUMP 1839 bool "kexec jump" 1840 depends on KEXEC && HIBERNATION 1841 ---help--- 1842 Jump between original kernel and kexeced kernel and invoke 1843 code in physical address mode via KEXEC 1844 1845config PHYSICAL_START 1846 hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP) 1847 default "0x1000000" 1848 ---help--- 1849 This gives the physical address where the kernel is loaded. 1850 1851 If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then 1852 bzImage will decompress itself to above physical address and 1853 run from there. Otherwise, bzImage will run from the address where 1854 it has been loaded by the boot loader and will ignore above physical 1855 address. 1856 1857 In normal kdump cases one does not have to set/change this option 1858 as now bzImage can be compiled as a completely relocatable image 1859 (CONFIG_RELOCATABLE=y) and be used to load and run from a different 1860 address. This option is mainly useful for the folks who don't want 1861 to use a bzImage for capturing the crash dump and want to use a 1862 vmlinux instead. vmlinux is not relocatable hence a kernel needs 1863 to be specifically compiled to run from a specific memory area 1864 (normally a reserved region) and this option comes handy. 1865 1866 So if you are using bzImage for capturing the crash dump, 1867 leave the value here unchanged to 0x1000000 and set 1868 CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux 1869 for capturing the crash dump change this value to start of 1870 the reserved region. In other words, it can be set based on 1871 the "X" value as specified in the "crashkernel=YM@XM" 1872 command line boot parameter passed to the panic-ed 1873 kernel. Please take a look at Documentation/kdump/kdump.txt 1874 for more details about crash dumps. 1875 1876 Usage of bzImage for capturing the crash dump is recommended as 1877 one does not have to build two kernels. Same kernel can be used 1878 as production kernel and capture kernel. Above option should have 1879 gone away after relocatable bzImage support is introduced. But it 1880 is present because there are users out there who continue to use 1881 vmlinux for dump capture. This option should go away down the 1882 line. 1883 1884 Don't change this unless you know what you are doing. 1885 1886config RELOCATABLE 1887 bool "Build a relocatable kernel" 1888 default y 1889 ---help--- 1890 This builds a kernel image that retains relocation information 1891 so it can be loaded someplace besides the default 1MB. 1892 The relocations tend to make the kernel binary about 10% larger, 1893 but are discarded at runtime. 1894 1895 One use is for the kexec on panic case where the recovery kernel 1896 must live at a different physical address than the primary 1897 kernel. 1898 1899 Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address 1900 it has been loaded at and the compile time physical address 1901 (CONFIG_PHYSICAL_START) is used as the minimum location. 1902 1903config RANDOMIZE_BASE 1904 bool "Randomize the address of the kernel image" 1905 depends on RELOCATABLE 1906 default n 1907 ---help--- 1908 Randomizes the physical and virtual address at which the 1909 kernel image is decompressed, as a security feature that 1910 deters exploit attempts relying on knowledge of the location 1911 of kernel internals. 1912 1913 Entropy is generated using the RDRAND instruction if it is 1914 supported. If RDTSC is supported, it is used as well. If 1915 neither RDRAND nor RDTSC are supported, then randomness is 1916 read from the i8254 timer. 1917 1918 The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET, 1919 and aligned according to PHYSICAL_ALIGN. Since the kernel is 1920 built using 2GiB addressing, and PHYSICAL_ALGIN must be at a 1921 minimum of 2MiB, only 10 bits of entropy is theoretically 1922 possible. At best, due to page table layouts, 64-bit can use 1923 9 bits of entropy and 32-bit uses 8 bits. 1924 1925 If unsure, say N. 1926 1927config RANDOMIZE_BASE_MAX_OFFSET 1928 hex "Maximum kASLR offset allowed" if EXPERT 1929 depends on RANDOMIZE_BASE 1930 range 0x0 0x20000000 if X86_32 1931 default "0x20000000" if X86_32 1932 range 0x0 0x40000000 if X86_64 1933 default "0x40000000" if X86_64 1934 ---help--- 1935 The lesser of RANDOMIZE_BASE_MAX_OFFSET and available physical 1936 memory is used to determine the maximal offset in bytes that will 1937 be applied to the kernel when kernel Address Space Layout 1938 Randomization (kASLR) is active. This must be a multiple of 1939 PHYSICAL_ALIGN. 1940 1941 On 32-bit this is limited to 512MiB by page table layouts. The 1942 default is 512MiB. 1943 1944 On 64-bit this is limited by how the kernel fixmap page table is 1945 positioned, so this cannot be larger than 1GiB currently. Without 1946 RANDOMIZE_BASE, there is a 512MiB to 1.5GiB split between kernel 1947 and modules. When RANDOMIZE_BASE_MAX_OFFSET is above 512MiB, the 1948 modules area will shrink to compensate, up to the current maximum 1949 1GiB to 1GiB split. The default is 1GiB. 1950 1951 If unsure, leave at the default value. 1952 1953# Relocation on x86 needs some additional build support 1954config X86_NEED_RELOCS 1955 def_bool y 1956 depends on RANDOMIZE_BASE || (X86_32 && RELOCATABLE) 1957 1958config PHYSICAL_ALIGN 1959 hex "Alignment value to which kernel should be aligned" 1960 default "0x200000" 1961 range 0x2000 0x1000000 if X86_32 1962 range 0x200000 0x1000000 if X86_64 1963 ---help--- 1964 This value puts the alignment restrictions on physical address 1965 where kernel is loaded and run from. Kernel is compiled for an 1966 address which meets above alignment restriction. 1967 1968 If bootloader loads the kernel at a non-aligned address and 1969 CONFIG_RELOCATABLE is set, kernel will move itself to nearest 1970 address aligned to above value and run from there. 1971 1972 If bootloader loads the kernel at a non-aligned address and 1973 CONFIG_RELOCATABLE is not set, kernel will ignore the run time 1974 load address and decompress itself to the address it has been 1975 compiled for and run from there. The address for which kernel is 1976 compiled already meets above alignment restrictions. Hence the 1977 end result is that kernel runs from a physical address meeting 1978 above alignment restrictions. 1979 1980 On 32-bit this value must be a multiple of 0x2000. On 64-bit 1981 this value must be a multiple of 0x200000. 1982 1983 Don't change this unless you know what you are doing. 1984 1985config HOTPLUG_CPU 1986 bool "Support for hot-pluggable CPUs" 1987 depends on SMP 1988 ---help--- 1989 Say Y here to allow turning CPUs off and on. CPUs can be 1990 controlled through /sys/devices/system/cpu. 1991 ( Note: power management support will enable this option 1992 automatically on SMP systems. ) 1993 Say N if you want to disable CPU hotplug. 1994 1995config BOOTPARAM_HOTPLUG_CPU0 1996 bool "Set default setting of cpu0_hotpluggable" 1997 default n 1998 depends on HOTPLUG_CPU 1999 ---help--- 2000 Set whether default state of cpu0_hotpluggable is on or off. 2001 2002 Say Y here to enable CPU0 hotplug by default. If this switch 2003 is turned on, there is no need to give cpu0_hotplug kernel 2004 parameter and the CPU0 hotplug feature is enabled by default. 2005 2006 Please note: there are two known CPU0 dependencies if you want 2007 to enable the CPU0 hotplug feature either by this switch or by 2008 cpu0_hotplug kernel parameter. 2009 2010 First, resume from hibernate or suspend always starts from CPU0. 2011 So hibernate and suspend are prevented if CPU0 is offline. 2012 2013 Second dependency is PIC interrupts always go to CPU0. CPU0 can not 2014 offline if any interrupt can not migrate out of CPU0. There may 2015 be other CPU0 dependencies. 2016 2017 Please make sure the dependencies are under your control before 2018 you enable this feature. 2019 2020 Say N if you don't want to enable CPU0 hotplug feature by default. 2021 You still can enable the CPU0 hotplug feature at boot by kernel 2022 parameter cpu0_hotplug. 2023 2024config DEBUG_HOTPLUG_CPU0 2025 def_bool n 2026 prompt "Debug CPU0 hotplug" 2027 depends on HOTPLUG_CPU 2028 ---help--- 2029 Enabling this option offlines CPU0 (if CPU0 can be offlined) as 2030 soon as possible and boots up userspace with CPU0 offlined. User 2031 can online CPU0 back after boot time. 2032 2033 To debug CPU0 hotplug, you need to enable CPU0 offline/online 2034 feature by either turning on CONFIG_BOOTPARAM_HOTPLUG_CPU0 during 2035 compilation or giving cpu0_hotplug kernel parameter at boot. 2036 2037 If unsure, say N. 2038 2039config COMPAT_VDSO 2040 def_bool n 2041 prompt "Disable the 32-bit vDSO (needed for glibc 2.3.3)" 2042 depends on X86_32 || IA32_EMULATION 2043 ---help--- 2044 Certain buggy versions of glibc will crash if they are 2045 presented with a 32-bit vDSO that is not mapped at the address 2046 indicated in its segment table. 2047 2048 The bug was introduced by f866314b89d56845f55e6f365e18b31ec978ec3a 2049 and fixed by 3b3ddb4f7db98ec9e912ccdf54d35df4aa30e04a and 2050 49ad572a70b8aeb91e57483a11dd1b77e31c4468. Glibc 2.3.3 is 2051 the only released version with the bug, but OpenSUSE 9 2052 contains a buggy "glibc 2.3.2". 2053 2054 The symptom of the bug is that everything crashes on startup, saying: 2055 dl_main: Assertion `(void *) ph->p_vaddr == _rtld_local._dl_sysinfo_dso' failed! 2056 2057 Saying Y here changes the default value of the vdso32 boot 2058 option from 1 to 0, which turns off the 32-bit vDSO entirely. 2059 This works around the glibc bug but hurts performance. 2060 2061 If unsure, say N: if you are compiling your own kernel, you 2062 are unlikely to be using a buggy version of glibc. 2063 2064choice 2065 prompt "vsyscall table for legacy applications" 2066 depends on X86_64 2067 default LEGACY_VSYSCALL_EMULATE 2068 help 2069 Legacy user code that does not know how to find the vDSO expects 2070 to be able to issue three syscalls by calling fixed addresses in 2071 kernel space. Since this location is not randomized with ASLR, 2072 it can be used to assist security vulnerability exploitation. 2073 2074 This setting can be changed at boot time via the kernel command 2075 line parameter vsyscall=[native|emulate|none]. 2076 2077 On a system with recent enough glibc (2.14 or newer) and no 2078 static binaries, you can say None without a performance penalty 2079 to improve security. 2080 2081 If unsure, select "Emulate". 2082 2083 config LEGACY_VSYSCALL_NATIVE 2084 bool "Native" 2085 help 2086 Actual executable code is located in the fixed vsyscall 2087 address mapping, implementing time() efficiently. Since 2088 this makes the mapping executable, it can be used during 2089 security vulnerability exploitation (traditionally as 2090 ROP gadgets). This configuration is not recommended. 2091 2092 config LEGACY_VSYSCALL_EMULATE 2093 bool "Emulate" 2094 help 2095 The kernel traps and emulates calls into the fixed 2096 vsyscall address mapping. This makes the mapping 2097 non-executable, but it still contains known contents, 2098 which could be used in certain rare security vulnerability 2099 exploits. This configuration is recommended when userspace 2100 still uses the vsyscall area. 2101 2102 config LEGACY_VSYSCALL_NONE 2103 bool "None" 2104 help 2105 There will be no vsyscall mapping at all. This will 2106 eliminate any risk of ASLR bypass due to the vsyscall 2107 fixed address mapping. Attempts to use the vsyscalls 2108 will be reported to dmesg, so that either old or 2109 malicious userspace programs can be identified. 2110 2111endchoice 2112 2113config CMDLINE_BOOL 2114 bool "Built-in kernel command line" 2115 ---help--- 2116 Allow for specifying boot arguments to the kernel at 2117 build time. On some systems (e.g. embedded ones), it is 2118 necessary or convenient to provide some or all of the 2119 kernel boot arguments with the kernel itself (that is, 2120 to not rely on the boot loader to provide them.) 2121 2122 To compile command line arguments into the kernel, 2123 set this option to 'Y', then fill in the 2124 boot arguments in CONFIG_CMDLINE. 2125 2126 Systems with fully functional boot loaders (i.e. non-embedded) 2127 should leave this option set to 'N'. 2128 2129config CMDLINE 2130 string "Built-in kernel command string" 2131 depends on CMDLINE_BOOL 2132 default "" 2133 ---help--- 2134 Enter arguments here that should be compiled into the kernel 2135 image and used at boot time. If the boot loader provides a 2136 command line at boot time, it is appended to this string to 2137 form the full kernel command line, when the system boots. 2138 2139 However, you can use the CONFIG_CMDLINE_OVERRIDE option to 2140 change this behavior. 2141 2142 In most cases, the command line (whether built-in or provided 2143 by the boot loader) should specify the device for the root 2144 file system. 2145 2146config CMDLINE_OVERRIDE 2147 bool "Built-in command line overrides boot loader arguments" 2148 depends on CMDLINE_BOOL 2149 ---help--- 2150 Set this option to 'Y' to have the kernel ignore the boot loader 2151 command line, and use ONLY the built-in command line. 2152 2153 This is used to work around broken boot loaders. This should 2154 be set to 'N' under normal conditions. 2155 2156config MODIFY_LDT_SYSCALL 2157 bool "Enable the LDT (local descriptor table)" if EXPERT 2158 default y 2159 ---help--- 2160 Linux can allow user programs to install a per-process x86 2161 Local Descriptor Table (LDT) using the modify_ldt(2) system 2162 call. This is required to run 16-bit or segmented code such as 2163 DOSEMU or some Wine programs. It is also used by some very old 2164 threading libraries. 2165 2166 Enabling this feature adds a small amount of overhead to 2167 context switches and increases the low-level kernel attack 2168 surface. Disabling it removes the modify_ldt(2) system call. 2169 2170 Saying 'N' here may make sense for embedded or server kernels. 2171 2172source "kernel/livepatch/Kconfig" 2173 2174endmenu 2175 2176config ARCH_ENABLE_MEMORY_HOTPLUG 2177 def_bool y 2178 depends on X86_64 || (X86_32 && HIGHMEM) 2179 2180config ARCH_ENABLE_MEMORY_HOTREMOVE 2181 def_bool y 2182 depends on MEMORY_HOTPLUG 2183 2184config USE_PERCPU_NUMA_NODE_ID 2185 def_bool y 2186 depends on NUMA 2187 2188config ARCH_ENABLE_SPLIT_PMD_PTLOCK 2189 def_bool y 2190 depends on X86_64 || X86_PAE 2191 2192config ARCH_ENABLE_HUGEPAGE_MIGRATION 2193 def_bool y 2194 depends on X86_64 && HUGETLB_PAGE && MIGRATION 2195 2196menu "Power management and ACPI options" 2197 2198config ARCH_HIBERNATION_HEADER 2199 def_bool y 2200 depends on X86_64 && HIBERNATION 2201 2202source "kernel/power/Kconfig" 2203 2204source "drivers/acpi/Kconfig" 2205 2206source "drivers/sfi/Kconfig" 2207 2208config X86_APM_BOOT 2209 def_bool y 2210 depends on APM 2211 2212menuconfig APM 2213 tristate "APM (Advanced Power Management) BIOS support" 2214 depends on X86_32 && PM_SLEEP 2215 ---help--- 2216 APM is a BIOS specification for saving power using several different 2217 techniques. This is mostly useful for battery powered laptops with 2218 APM compliant BIOSes. If you say Y here, the system time will be 2219 reset after a RESUME operation, the /proc/apm device will provide 2220 battery status information, and user-space programs will receive 2221 notification of APM "events" (e.g. battery status change). 2222 2223 If you select "Y" here, you can disable actual use of the APM 2224 BIOS by passing the "apm=off" option to the kernel at boot time. 2225 2226 Note that the APM support is almost completely disabled for 2227 machines with more than one CPU. 2228 2229 In order to use APM, you will need supporting software. For location 2230 and more information, read <file:Documentation/power/apm-acpi.txt> 2231 and the Battery Powered Linux mini-HOWTO, available from 2232 <http://www.tldp.org/docs.html#howto>. 2233 2234 This driver does not spin down disk drives (see the hdparm(8) 2235 manpage ("man 8 hdparm") for that), and it doesn't turn off 2236 VESA-compliant "green" monitors. 2237 2238 This driver does not support the TI 4000M TravelMate and the ACER 2239 486/DX4/75 because they don't have compliant BIOSes. Many "green" 2240 desktop machines also don't have compliant BIOSes, and this driver 2241 may cause those machines to panic during the boot phase. 2242 2243 Generally, if you don't have a battery in your machine, there isn't 2244 much point in using this driver and you should say N. If you get 2245 random kernel OOPSes or reboots that don't seem to be related to 2246 anything, try disabling/enabling this option (or disabling/enabling 2247 APM in your BIOS). 2248 2249 Some other things you should try when experiencing seemingly random, 2250 "weird" problems: 2251 2252 1) make sure that you have enough swap space and that it is 2253 enabled. 2254 2) pass the "no-hlt" option to the kernel 2255 3) switch on floating point emulation in the kernel and pass 2256 the "no387" option to the kernel 2257 4) pass the "floppy=nodma" option to the kernel 2258 5) pass the "mem=4M" option to the kernel (thereby disabling 2259 all but the first 4 MB of RAM) 2260 6) make sure that the CPU is not over clocked. 2261 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/> 2262 8) disable the cache from your BIOS settings 2263 9) install a fan for the video card or exchange video RAM 2264 10) install a better fan for the CPU 2265 11) exchange RAM chips 2266 12) exchange the motherboard. 2267 2268 To compile this driver as a module, choose M here: the 2269 module will be called apm. 2270 2271if APM 2272 2273config APM_IGNORE_USER_SUSPEND 2274 bool "Ignore USER SUSPEND" 2275 ---help--- 2276 This option will ignore USER SUSPEND requests. On machines with a 2277 compliant APM BIOS, you want to say N. However, on the NEC Versa M 2278 series notebooks, it is necessary to say Y because of a BIOS bug. 2279 2280config APM_DO_ENABLE 2281 bool "Enable PM at boot time" 2282 ---help--- 2283 Enable APM features at boot time. From page 36 of the APM BIOS 2284 specification: "When disabled, the APM BIOS does not automatically 2285 power manage devices, enter the Standby State, enter the Suspend 2286 State, or take power saving steps in response to CPU Idle calls." 2287 This driver will make CPU Idle calls when Linux is idle (unless this 2288 feature is turned off -- see "Do CPU IDLE calls", below). This 2289 should always save battery power, but more complicated APM features 2290 will be dependent on your BIOS implementation. You may need to turn 2291 this option off if your computer hangs at boot time when using APM 2292 support, or if it beeps continuously instead of suspending. Turn 2293 this off if you have a NEC UltraLite Versa 33/C or a Toshiba 2294 T400CDT. This is off by default since most machines do fine without 2295 this feature. 2296 2297config APM_CPU_IDLE 2298 depends on CPU_IDLE 2299 bool "Make CPU Idle calls when idle" 2300 ---help--- 2301 Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop. 2302 On some machines, this can activate improved power savings, such as 2303 a slowed CPU clock rate, when the machine is idle. These idle calls 2304 are made after the idle loop has run for some length of time (e.g., 2305 333 mS). On some machines, this will cause a hang at boot time or 2306 whenever the CPU becomes idle. (On machines with more than one CPU, 2307 this option does nothing.) 2308 2309config APM_DISPLAY_BLANK 2310 bool "Enable console blanking using APM" 2311 ---help--- 2312 Enable console blanking using the APM. Some laptops can use this to 2313 turn off the LCD backlight when the screen blanker of the Linux 2314 virtual console blanks the screen. Note that this is only used by 2315 the virtual console screen blanker, and won't turn off the backlight 2316 when using the X Window system. This also doesn't have anything to 2317 do with your VESA-compliant power-saving monitor. Further, this 2318 option doesn't work for all laptops -- it might not turn off your 2319 backlight at all, or it might print a lot of errors to the console, 2320 especially if you are using gpm. 2321 2322config APM_ALLOW_INTS 2323 bool "Allow interrupts during APM BIOS calls" 2324 ---help--- 2325 Normally we disable external interrupts while we are making calls to 2326 the APM BIOS as a measure to lessen the effects of a badly behaving 2327 BIOS implementation. The BIOS should reenable interrupts if it 2328 needs to. Unfortunately, some BIOSes do not -- especially those in 2329 many of the newer IBM Thinkpads. If you experience hangs when you 2330 suspend, try setting this to Y. Otherwise, say N. 2331 2332endif # APM 2333 2334source "drivers/cpufreq/Kconfig" 2335 2336source "drivers/cpuidle/Kconfig" 2337 2338source "drivers/idle/Kconfig" 2339 2340endmenu 2341 2342 2343menu "Bus options (PCI etc.)" 2344 2345config PCI 2346 bool "PCI support" 2347 default y 2348 ---help--- 2349 Find out whether you have a PCI motherboard. PCI is the name of a 2350 bus system, i.e. the way the CPU talks to the other stuff inside 2351 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or 2352 VESA. If you have PCI, say Y, otherwise N. 2353 2354choice 2355 prompt "PCI access mode" 2356 depends on X86_32 && PCI 2357 default PCI_GOANY 2358 ---help--- 2359 On PCI systems, the BIOS can be used to detect the PCI devices and 2360 determine their configuration. However, some old PCI motherboards 2361 have BIOS bugs and may crash if this is done. Also, some embedded 2362 PCI-based systems don't have any BIOS at all. Linux can also try to 2363 detect the PCI hardware directly without using the BIOS. 2364 2365 With this option, you can specify how Linux should detect the 2366 PCI devices. If you choose "BIOS", the BIOS will be used, 2367 if you choose "Direct", the BIOS won't be used, and if you 2368 choose "MMConfig", then PCI Express MMCONFIG will be used. 2369 If you choose "Any", the kernel will try MMCONFIG, then the 2370 direct access method and falls back to the BIOS if that doesn't 2371 work. If unsure, go with the default, which is "Any". 2372 2373config PCI_GOBIOS 2374 bool "BIOS" 2375 2376config PCI_GOMMCONFIG 2377 bool "MMConfig" 2378 2379config PCI_GODIRECT 2380 bool "Direct" 2381 2382config PCI_GOOLPC 2383 bool "OLPC XO-1" 2384 depends on OLPC 2385 2386config PCI_GOANY 2387 bool "Any" 2388 2389endchoice 2390 2391config PCI_BIOS 2392 def_bool y 2393 depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY) 2394 2395# x86-64 doesn't support PCI BIOS access from long mode so always go direct. 2396config PCI_DIRECT 2397 def_bool y 2398 depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC || PCI_GOMMCONFIG)) 2399 2400config PCI_MMCONFIG 2401 def_bool y 2402 depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY) 2403 2404config PCI_OLPC 2405 def_bool y 2406 depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY) 2407 2408config PCI_XEN 2409 def_bool y 2410 depends on PCI && XEN 2411 select SWIOTLB_XEN 2412 2413config PCI_DOMAINS 2414 def_bool y 2415 depends on PCI 2416 2417config PCI_MMCONFIG 2418 bool "Support mmconfig PCI config space access" 2419 depends on X86_64 && PCI && ACPI 2420 2421config PCI_CNB20LE_QUIRK 2422 bool "Read CNB20LE Host Bridge Windows" if EXPERT 2423 depends on PCI 2424 help 2425 Read the PCI windows out of the CNB20LE host bridge. This allows 2426 PCI hotplug to work on systems with the CNB20LE chipset which do 2427 not have ACPI. 2428 2429 There's no public spec for this chipset, and this functionality 2430 is known to be incomplete. 2431 2432 You should say N unless you know you need this. 2433 2434source "drivers/pci/pcie/Kconfig" 2435 2436source "drivers/pci/Kconfig" 2437 2438# x86_64 have no ISA slots, but can have ISA-style DMA. 2439config ISA_DMA_API 2440 bool "ISA-style DMA support" if (X86_64 && EXPERT) 2441 default y 2442 help 2443 Enables ISA-style DMA support for devices requiring such controllers. 2444 If unsure, say Y. 2445 2446if X86_32 2447 2448config ISA 2449 bool "ISA support" 2450 ---help--- 2451 Find out whether you have ISA slots on your motherboard. ISA is the 2452 name of a bus system, i.e. the way the CPU talks to the other stuff 2453 inside your box. Other bus systems are PCI, EISA, MicroChannel 2454 (MCA) or VESA. ISA is an older system, now being displaced by PCI; 2455 newer boards don't support it. If you have ISA, say Y, otherwise N. 2456 2457config EISA 2458 bool "EISA support" 2459 depends on ISA 2460 ---help--- 2461 The Extended Industry Standard Architecture (EISA) bus was 2462 developed as an open alternative to the IBM MicroChannel bus. 2463 2464 The EISA bus provided some of the features of the IBM MicroChannel 2465 bus while maintaining backward compatibility with cards made for 2466 the older ISA bus. The EISA bus saw limited use between 1988 and 2467 1995 when it was made obsolete by the PCI bus. 2468 2469 Say Y here if you are building a kernel for an EISA-based machine. 2470 2471 Otherwise, say N. 2472 2473source "drivers/eisa/Kconfig" 2474 2475config SCx200 2476 tristate "NatSemi SCx200 support" 2477 ---help--- 2478 This provides basic support for National Semiconductor's 2479 (now AMD's) Geode processors. The driver probes for the 2480 PCI-IDs of several on-chip devices, so its a good dependency 2481 for other scx200_* drivers. 2482 2483 If compiled as a module, the driver is named scx200. 2484 2485config SCx200HR_TIMER 2486 tristate "NatSemi SCx200 27MHz High-Resolution Timer Support" 2487 depends on SCx200 2488 default y 2489 ---help--- 2490 This driver provides a clocksource built upon the on-chip 2491 27MHz high-resolution timer. Its also a workaround for 2492 NSC Geode SC-1100's buggy TSC, which loses time when the 2493 processor goes idle (as is done by the scheduler). The 2494 other workaround is idle=poll boot option. 2495 2496config OLPC 2497 bool "One Laptop Per Child support" 2498 depends on !X86_PAE 2499 select GPIOLIB 2500 select OF 2501 select OF_PROMTREE 2502 select IRQ_DOMAIN 2503 ---help--- 2504 Add support for detecting the unique features of the OLPC 2505 XO hardware. 2506 2507config OLPC_XO1_PM 2508 bool "OLPC XO-1 Power Management" 2509 depends on OLPC && MFD_CS5535 && PM_SLEEP 2510 select MFD_CORE 2511 ---help--- 2512 Add support for poweroff and suspend of the OLPC XO-1 laptop. 2513 2514config OLPC_XO1_RTC 2515 bool "OLPC XO-1 Real Time Clock" 2516 depends on OLPC_XO1_PM && RTC_DRV_CMOS 2517 ---help--- 2518 Add support for the XO-1 real time clock, which can be used as a 2519 programmable wakeup source. 2520 2521config OLPC_XO1_SCI 2522 bool "OLPC XO-1 SCI extras" 2523 depends on OLPC && OLPC_XO1_PM 2524 depends on INPUT=y 2525 select POWER_SUPPLY 2526 select GPIO_CS5535 2527 select MFD_CORE 2528 ---help--- 2529 Add support for SCI-based features of the OLPC XO-1 laptop: 2530 - EC-driven system wakeups 2531 - Power button 2532 - Ebook switch 2533 - Lid switch 2534 - AC adapter status updates 2535 - Battery status updates 2536 2537config OLPC_XO15_SCI 2538 bool "OLPC XO-1.5 SCI extras" 2539 depends on OLPC && ACPI 2540 select POWER_SUPPLY 2541 ---help--- 2542 Add support for SCI-based features of the OLPC XO-1.5 laptop: 2543 - EC-driven system wakeups 2544 - AC adapter status updates 2545 - Battery status updates 2546 2547config ALIX 2548 bool "PCEngines ALIX System Support (LED setup)" 2549 select GPIOLIB 2550 ---help--- 2551 This option enables system support for the PCEngines ALIX. 2552 At present this just sets up LEDs for GPIO control on 2553 ALIX2/3/6 boards. However, other system specific setup should 2554 get added here. 2555 2556 Note: You must still enable the drivers for GPIO and LED support 2557 (GPIO_CS5535 & LEDS_GPIO) to actually use the LEDs 2558 2559 Note: You have to set alix.force=1 for boards with Award BIOS. 2560 2561config NET5501 2562 bool "Soekris Engineering net5501 System Support (LEDS, GPIO, etc)" 2563 select GPIOLIB 2564 ---help--- 2565 This option enables system support for the Soekris Engineering net5501. 2566 2567config GEOS 2568 bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)" 2569 select GPIOLIB 2570 depends on DMI 2571 ---help--- 2572 This option enables system support for the Traverse Technologies GEOS. 2573 2574config TS5500 2575 bool "Technologic Systems TS-5500 platform support" 2576 depends on MELAN 2577 select CHECK_SIGNATURE 2578 select NEW_LEDS 2579 select LEDS_CLASS 2580 ---help--- 2581 This option enables system support for the Technologic Systems TS-5500. 2582 2583endif # X86_32 2584 2585config AMD_NB 2586 def_bool y 2587 depends on CPU_SUP_AMD && PCI 2588 2589source "drivers/pcmcia/Kconfig" 2590 2591source "drivers/pci/hotplug/Kconfig" 2592 2593config RAPIDIO 2594 tristate "RapidIO support" 2595 depends on PCI 2596 default n 2597 help 2598 If enabled this option will include drivers and the core 2599 infrastructure code to support RapidIO interconnect devices. 2600 2601source "drivers/rapidio/Kconfig" 2602 2603config X86_SYSFB 2604 bool "Mark VGA/VBE/EFI FB as generic system framebuffer" 2605 help 2606 Firmwares often provide initial graphics framebuffers so the BIOS, 2607 bootloader or kernel can show basic video-output during boot for 2608 user-guidance and debugging. Historically, x86 used the VESA BIOS 2609 Extensions and EFI-framebuffers for this, which are mostly limited 2610 to x86. 2611 This option, if enabled, marks VGA/VBE/EFI framebuffers as generic 2612 framebuffers so the new generic system-framebuffer drivers can be 2613 used on x86. If the framebuffer is not compatible with the generic 2614 modes, it is adverticed as fallback platform framebuffer so legacy 2615 drivers like efifb, vesafb and uvesafb can pick it up. 2616 If this option is not selected, all system framebuffers are always 2617 marked as fallback platform framebuffers as usual. 2618 2619 Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will 2620 not be able to pick up generic system framebuffers if this option 2621 is selected. You are highly encouraged to enable simplefb as 2622 replacement if you select this option. simplefb can correctly deal 2623 with generic system framebuffers. But you should still keep vesafb 2624 and others enabled as fallback if a system framebuffer is 2625 incompatible with simplefb. 2626 2627 If unsure, say Y. 2628 2629endmenu 2630 2631 2632menu "Executable file formats / Emulations" 2633 2634source "fs/Kconfig.binfmt" 2635 2636config IA32_EMULATION 2637 bool "IA32 Emulation" 2638 depends on X86_64 2639 select BINFMT_ELF 2640 select COMPAT_BINFMT_ELF 2641 select ARCH_WANT_OLD_COMPAT_IPC 2642 ---help--- 2643 Include code to run legacy 32-bit programs under a 2644 64-bit kernel. You should likely turn this on, unless you're 2645 100% sure that you don't have any 32-bit programs left. 2646 2647config IA32_AOUT 2648 tristate "IA32 a.out support" 2649 depends on IA32_EMULATION 2650 ---help--- 2651 Support old a.out binaries in the 32bit emulation. 2652 2653config X86_X32 2654 bool "x32 ABI for 64-bit mode" 2655 depends on X86_64 2656 ---help--- 2657 Include code to run binaries for the x32 native 32-bit ABI 2658 for 64-bit processors. An x32 process gets access to the 2659 full 64-bit register file and wide data path while leaving 2660 pointers at 32 bits for smaller memory footprint. 2661 2662 You will need a recent binutils (2.22 or later) with 2663 elf32_x86_64 support enabled to compile a kernel with this 2664 option set. 2665 2666config COMPAT 2667 def_bool y 2668 depends on IA32_EMULATION || X86_X32 2669 2670if COMPAT 2671config COMPAT_FOR_U64_ALIGNMENT 2672 def_bool y 2673 2674config SYSVIPC_COMPAT 2675 def_bool y 2676 depends on SYSVIPC 2677 2678config KEYS_COMPAT 2679 def_bool y 2680 depends on KEYS 2681endif 2682 2683endmenu 2684 2685 2686config HAVE_ATOMIC_IOMAP 2687 def_bool y 2688 depends on X86_32 2689 2690config X86_DEV_DMA_OPS 2691 bool 2692 depends on X86_64 || STA2X11 2693 2694config X86_DMA_REMAP 2695 bool 2696 depends on STA2X11 2697 2698config PMC_ATOM 2699 def_bool y 2700 depends on PCI 2701 2702config VMD 2703 depends on PCI_MSI 2704 tristate "Volume Management Device Driver" 2705 default N 2706 ---help--- 2707 Adds support for the Intel Volume Management Device (VMD). VMD is a 2708 secondary PCI host bridge that allows PCI Express root ports, 2709 and devices attached to them, to be removed from the default 2710 PCI domain and placed within the VMD domain. This provides 2711 more bus resources than are otherwise possible with a 2712 single domain. If you know your system provides one of these and 2713 has devices attached to it, say Y; if you are not sure, say N. 2714 2715source "net/Kconfig" 2716 2717source "drivers/Kconfig" 2718 2719source "drivers/firmware/Kconfig" 2720 2721source "fs/Kconfig" 2722 2723source "arch/x86/Kconfig.debug" 2724 2725source "security/Kconfig" 2726 2727source "crypto/Kconfig" 2728 2729source "arch/x86/kvm/Kconfig" 2730 2731source "lib/Kconfig" 2732