xref: /openbmc/linux/arch/um/kernel/trap.c (revision a16be368)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
4  */
5 
6 #include <linux/mm.h>
7 #include <linux/sched/signal.h>
8 #include <linux/hardirq.h>
9 #include <linux/module.h>
10 #include <linux/uaccess.h>
11 #include <linux/sched/debug.h>
12 #include <asm/current.h>
13 #include <asm/tlbflush.h>
14 #include <arch.h>
15 #include <as-layout.h>
16 #include <kern_util.h>
17 #include <os.h>
18 #include <skas.h>
19 
20 /*
21  * Note this is constrained to return 0, -EFAULT, -EACCES, -ENOMEM by
22  * segv().
23  */
24 int handle_page_fault(unsigned long address, unsigned long ip,
25 		      int is_write, int is_user, int *code_out)
26 {
27 	struct mm_struct *mm = current->mm;
28 	struct vm_area_struct *vma;
29 	pmd_t *pmd;
30 	pte_t *pte;
31 	int err = -EFAULT;
32 	unsigned int flags = FAULT_FLAG_DEFAULT;
33 
34 	*code_out = SEGV_MAPERR;
35 
36 	/*
37 	 * If the fault was with pagefaults disabled, don't take the fault, just
38 	 * fail.
39 	 */
40 	if (faulthandler_disabled())
41 		goto out_nosemaphore;
42 
43 	if (is_user)
44 		flags |= FAULT_FLAG_USER;
45 retry:
46 	mmap_read_lock(mm);
47 	vma = find_vma(mm, address);
48 	if (!vma)
49 		goto out;
50 	else if (vma->vm_start <= address)
51 		goto good_area;
52 	else if (!(vma->vm_flags & VM_GROWSDOWN))
53 		goto out;
54 	else if (is_user && !ARCH_IS_STACKGROW(address))
55 		goto out;
56 	else if (expand_stack(vma, address))
57 		goto out;
58 
59 good_area:
60 	*code_out = SEGV_ACCERR;
61 	if (is_write) {
62 		if (!(vma->vm_flags & VM_WRITE))
63 			goto out;
64 		flags |= FAULT_FLAG_WRITE;
65 	} else {
66 		/* Don't require VM_READ|VM_EXEC for write faults! */
67 		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
68 			goto out;
69 	}
70 
71 	do {
72 		vm_fault_t fault;
73 
74 		fault = handle_mm_fault(vma, address, flags);
75 
76 		if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
77 			goto out_nosemaphore;
78 
79 		if (unlikely(fault & VM_FAULT_ERROR)) {
80 			if (fault & VM_FAULT_OOM) {
81 				goto out_of_memory;
82 			} else if (fault & VM_FAULT_SIGSEGV) {
83 				goto out;
84 			} else if (fault & VM_FAULT_SIGBUS) {
85 				err = -EACCES;
86 				goto out;
87 			}
88 			BUG();
89 		}
90 		if (flags & FAULT_FLAG_ALLOW_RETRY) {
91 			if (fault & VM_FAULT_MAJOR)
92 				current->maj_flt++;
93 			else
94 				current->min_flt++;
95 			if (fault & VM_FAULT_RETRY) {
96 				flags |= FAULT_FLAG_TRIED;
97 
98 				goto retry;
99 			}
100 		}
101 
102 		pmd = pmd_off(mm, address);
103 		pte = pte_offset_kernel(pmd, address);
104 	} while (!pte_present(*pte));
105 	err = 0;
106 	/*
107 	 * The below warning was added in place of
108 	 *	pte_mkyoung(); if (is_write) pte_mkdirty();
109 	 * If it's triggered, we'd see normally a hang here (a clean pte is
110 	 * marked read-only to emulate the dirty bit).
111 	 * However, the generic code can mark a PTE writable but clean on a
112 	 * concurrent read fault, triggering this harmlessly. So comment it out.
113 	 */
114 #if 0
115 	WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
116 #endif
117 	flush_tlb_page(vma, address);
118 out:
119 	mmap_read_unlock(mm);
120 out_nosemaphore:
121 	return err;
122 
123 out_of_memory:
124 	/*
125 	 * We ran out of memory, call the OOM killer, and return the userspace
126 	 * (which will retry the fault, or kill us if we got oom-killed).
127 	 */
128 	mmap_read_unlock(mm);
129 	if (!is_user)
130 		goto out_nosemaphore;
131 	pagefault_out_of_memory();
132 	return 0;
133 }
134 EXPORT_SYMBOL(handle_page_fault);
135 
136 static void show_segv_info(struct uml_pt_regs *regs)
137 {
138 	struct task_struct *tsk = current;
139 	struct faultinfo *fi = UPT_FAULTINFO(regs);
140 
141 	if (!unhandled_signal(tsk, SIGSEGV))
142 		return;
143 
144 	if (!printk_ratelimit())
145 		return;
146 
147 	printk("%s%s[%d]: segfault at %lx ip %px sp %px error %x",
148 		task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
149 		tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi),
150 		(void *)UPT_IP(regs), (void *)UPT_SP(regs),
151 		fi->error_code);
152 
153 	print_vma_addr(KERN_CONT " in ", UPT_IP(regs));
154 	printk(KERN_CONT "\n");
155 }
156 
157 static void bad_segv(struct faultinfo fi, unsigned long ip)
158 {
159 	current->thread.arch.faultinfo = fi;
160 	force_sig_fault(SIGSEGV, SEGV_ACCERR, (void __user *) FAULT_ADDRESS(fi));
161 }
162 
163 void fatal_sigsegv(void)
164 {
165 	force_sigsegv(SIGSEGV);
166 	do_signal(&current->thread.regs);
167 	/*
168 	 * This is to tell gcc that we're not returning - do_signal
169 	 * can, in general, return, but in this case, it's not, since
170 	 * we just got a fatal SIGSEGV queued.
171 	 */
172 	os_dump_core();
173 }
174 
175 /**
176  * segv_handler() - the SIGSEGV handler
177  * @sig:	the signal number
178  * @unused_si:	the signal info struct; unused in this handler
179  * @regs:	the ptrace register information
180  *
181  * The handler first extracts the faultinfo from the UML ptrace regs struct.
182  * If the userfault did not happen in an UML userspace process, bad_segv is called.
183  * Otherwise the signal did happen in a cloned userspace process, handle it.
184  */
185 void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
186 {
187 	struct faultinfo * fi = UPT_FAULTINFO(regs);
188 
189 	if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) {
190 		show_segv_info(regs);
191 		bad_segv(*fi, UPT_IP(regs));
192 		return;
193 	}
194 	segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
195 }
196 
197 /*
198  * We give a *copy* of the faultinfo in the regs to segv.
199  * This must be done, since nesting SEGVs could overwrite
200  * the info in the regs. A pointer to the info then would
201  * give us bad data!
202  */
203 unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user,
204 		   struct uml_pt_regs *regs)
205 {
206 	jmp_buf *catcher;
207 	int si_code;
208 	int err;
209 	int is_write = FAULT_WRITE(fi);
210 	unsigned long address = FAULT_ADDRESS(fi);
211 
212 	if (!is_user && regs)
213 		current->thread.segv_regs = container_of(regs, struct pt_regs, regs);
214 
215 	if (!is_user && (address >= start_vm) && (address < end_vm)) {
216 		flush_tlb_kernel_vm();
217 		goto out;
218 	}
219 	else if (current->mm == NULL) {
220 		show_regs(container_of(regs, struct pt_regs, regs));
221 		panic("Segfault with no mm");
222 	}
223 	else if (!is_user && address > PAGE_SIZE && address < TASK_SIZE) {
224 		show_regs(container_of(regs, struct pt_regs, regs));
225 		panic("Kernel tried to access user memory at addr 0x%lx, ip 0x%lx",
226 		       address, ip);
227 	}
228 
229 	if (SEGV_IS_FIXABLE(&fi))
230 		err = handle_page_fault(address, ip, is_write, is_user,
231 					&si_code);
232 	else {
233 		err = -EFAULT;
234 		/*
235 		 * A thread accessed NULL, we get a fault, but CR2 is invalid.
236 		 * This code is used in __do_copy_from_user() of TT mode.
237 		 * XXX tt mode is gone, so maybe this isn't needed any more
238 		 */
239 		address = 0;
240 	}
241 
242 	catcher = current->thread.fault_catcher;
243 	if (!err)
244 		goto out;
245 	else if (catcher != NULL) {
246 		current->thread.fault_addr = (void *) address;
247 		UML_LONGJMP(catcher, 1);
248 	}
249 	else if (current->thread.fault_addr != NULL)
250 		panic("fault_addr set but no fault catcher");
251 	else if (!is_user && arch_fixup(ip, regs))
252 		goto out;
253 
254 	if (!is_user) {
255 		show_regs(container_of(regs, struct pt_regs, regs));
256 		panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
257 		      address, ip);
258 	}
259 
260 	show_segv_info(regs);
261 
262 	if (err == -EACCES) {
263 		current->thread.arch.faultinfo = fi;
264 		force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
265 	} else {
266 		BUG_ON(err != -EFAULT);
267 		current->thread.arch.faultinfo = fi;
268 		force_sig_fault(SIGSEGV, si_code, (void __user *) address);
269 	}
270 
271 out:
272 	if (regs)
273 		current->thread.segv_regs = NULL;
274 
275 	return 0;
276 }
277 
278 void relay_signal(int sig, struct siginfo *si, struct uml_pt_regs *regs)
279 {
280 	int code, err;
281 	if (!UPT_IS_USER(regs)) {
282 		if (sig == SIGBUS)
283 			printk(KERN_ERR "Bus error - the host /dev/shm or /tmp "
284 			       "mount likely just ran out of space\n");
285 		panic("Kernel mode signal %d", sig);
286 	}
287 
288 	arch_examine_signal(sig, regs);
289 
290 	/* Is the signal layout for the signal known?
291 	 * Signal data must be scrubbed to prevent information leaks.
292 	 */
293 	code = si->si_code;
294 	err = si->si_errno;
295 	if ((err == 0) && (siginfo_layout(sig, code) == SIL_FAULT)) {
296 		struct faultinfo *fi = UPT_FAULTINFO(regs);
297 		current->thread.arch.faultinfo = *fi;
298 		force_sig_fault(sig, code, (void __user *)FAULT_ADDRESS(*fi));
299 	} else {
300 		printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d) with errno %d\n",
301 		       sig, code, err);
302 		force_sig(sig);
303 	}
304 }
305 
306 void bus_handler(int sig, struct siginfo *si, struct uml_pt_regs *regs)
307 {
308 	if (current->thread.fault_catcher != NULL)
309 		UML_LONGJMP(current->thread.fault_catcher, 1);
310 	else
311 		relay_signal(sig, si, regs);
312 }
313 
314 void winch(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
315 {
316 	do_IRQ(WINCH_IRQ, regs);
317 }
318 
319 void trap_init(void)
320 {
321 }
322