xref: /openbmc/linux/arch/um/kernel/trap.c (revision 7e035230)
1 /*
2  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
3  * Licensed under the GPL
4  */
5 
6 #include <linux/mm.h>
7 #include <linux/sched.h>
8 #include <linux/hardirq.h>
9 #include <linux/module.h>
10 #include <asm/current.h>
11 #include <asm/pgtable.h>
12 #include <asm/tlbflush.h>
13 #include "arch.h"
14 #include "as-layout.h"
15 #include "kern_util.h"
16 #include "os.h"
17 #include "skas.h"
18 
19 /*
20  * Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by
21  * segv().
22  */
23 int handle_page_fault(unsigned long address, unsigned long ip,
24 		      int is_write, int is_user, int *code_out)
25 {
26 	struct mm_struct *mm = current->mm;
27 	struct vm_area_struct *vma;
28 	pgd_t *pgd;
29 	pud_t *pud;
30 	pmd_t *pmd;
31 	pte_t *pte;
32 	int err = -EFAULT;
33 	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
34 				 (is_write ? FAULT_FLAG_WRITE : 0);
35 
36 	*code_out = SEGV_MAPERR;
37 
38 	/*
39 	 * If the fault was during atomic operation, don't take the fault, just
40 	 * fail.
41 	 */
42 	if (in_atomic())
43 		goto out_nosemaphore;
44 
45 retry:
46 	down_read(&mm->mmap_sem);
47 	vma = find_vma(mm, address);
48 	if (!vma)
49 		goto out;
50 	else if (vma->vm_start <= address)
51 		goto good_area;
52 	else if (!(vma->vm_flags & VM_GROWSDOWN))
53 		goto out;
54 	else if (is_user && !ARCH_IS_STACKGROW(address))
55 		goto out;
56 	else if (expand_stack(vma, address))
57 		goto out;
58 
59 good_area:
60 	*code_out = SEGV_ACCERR;
61 	if (is_write && !(vma->vm_flags & VM_WRITE))
62 		goto out;
63 
64 	/* Don't require VM_READ|VM_EXEC for write faults! */
65 	if (!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
66 		goto out;
67 
68 	do {
69 		int fault;
70 
71 		fault = handle_mm_fault(mm, vma, address, flags);
72 
73 		if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
74 			goto out_nosemaphore;
75 
76 		if (unlikely(fault & VM_FAULT_ERROR)) {
77 			if (fault & VM_FAULT_OOM) {
78 				goto out_of_memory;
79 			} else if (fault & VM_FAULT_SIGBUS) {
80 				err = -EACCES;
81 				goto out;
82 			}
83 			BUG();
84 		}
85 		if (flags & FAULT_FLAG_ALLOW_RETRY) {
86 			if (fault & VM_FAULT_MAJOR)
87 				current->maj_flt++;
88 			else
89 				current->min_flt++;
90 			if (fault & VM_FAULT_RETRY) {
91 				flags &= ~FAULT_FLAG_ALLOW_RETRY;
92 
93 				goto retry;
94 			}
95 		}
96 
97 		pgd = pgd_offset(mm, address);
98 		pud = pud_offset(pgd, address);
99 		pmd = pmd_offset(pud, address);
100 		pte = pte_offset_kernel(pmd, address);
101 	} while (!pte_present(*pte));
102 	err = 0;
103 	/*
104 	 * The below warning was added in place of
105 	 *	pte_mkyoung(); if (is_write) pte_mkdirty();
106 	 * If it's triggered, we'd see normally a hang here (a clean pte is
107 	 * marked read-only to emulate the dirty bit).
108 	 * However, the generic code can mark a PTE writable but clean on a
109 	 * concurrent read fault, triggering this harmlessly. So comment it out.
110 	 */
111 #if 0
112 	WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
113 #endif
114 	flush_tlb_page(vma, address);
115 out:
116 	up_read(&mm->mmap_sem);
117 out_nosemaphore:
118 	return err;
119 
120 out_of_memory:
121 	/*
122 	 * We ran out of memory, call the OOM killer, and return the userspace
123 	 * (which will retry the fault, or kill us if we got oom-killed).
124 	 */
125 	up_read(&mm->mmap_sem);
126 	pagefault_out_of_memory();
127 	return 0;
128 }
129 EXPORT_SYMBOL(handle_page_fault);
130 
131 static void show_segv_info(struct uml_pt_regs *regs)
132 {
133 	struct task_struct *tsk = current;
134 	struct faultinfo *fi = UPT_FAULTINFO(regs);
135 
136 	if (!unhandled_signal(tsk, SIGSEGV))
137 		return;
138 
139 	if (!printk_ratelimit())
140 		return;
141 
142 	printk("%s%s[%d]: segfault at %lx ip %p sp %p error %x",
143 		task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
144 		tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi),
145 		(void *)UPT_IP(regs), (void *)UPT_SP(regs),
146 		fi->error_code);
147 
148 	print_vma_addr(KERN_CONT " in ", UPT_IP(regs));
149 	printk(KERN_CONT "\n");
150 }
151 
152 static void bad_segv(struct faultinfo fi, unsigned long ip)
153 {
154 	struct siginfo si;
155 
156 	si.si_signo = SIGSEGV;
157 	si.si_code = SEGV_ACCERR;
158 	si.si_addr = (void __user *) FAULT_ADDRESS(fi);
159 	current->thread.arch.faultinfo = fi;
160 	force_sig_info(SIGSEGV, &si, current);
161 }
162 
163 void fatal_sigsegv(void)
164 {
165 	force_sigsegv(SIGSEGV, current);
166 	do_signal();
167 	/*
168 	 * This is to tell gcc that we're not returning - do_signal
169 	 * can, in general, return, but in this case, it's not, since
170 	 * we just got a fatal SIGSEGV queued.
171 	 */
172 	os_dump_core();
173 }
174 
175 void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
176 {
177 	struct faultinfo * fi = UPT_FAULTINFO(regs);
178 
179 	if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) {
180 		show_segv_info(regs);
181 		bad_segv(*fi, UPT_IP(regs));
182 		return;
183 	}
184 	segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
185 }
186 
187 /*
188  * We give a *copy* of the faultinfo in the regs to segv.
189  * This must be done, since nesting SEGVs could overwrite
190  * the info in the regs. A pointer to the info then would
191  * give us bad data!
192  */
193 unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user,
194 		   struct uml_pt_regs *regs)
195 {
196 	struct siginfo si;
197 	jmp_buf *catcher;
198 	int err;
199 	int is_write = FAULT_WRITE(fi);
200 	unsigned long address = FAULT_ADDRESS(fi);
201 
202 	if (!is_user && (address >= start_vm) && (address < end_vm)) {
203 		flush_tlb_kernel_vm();
204 		return 0;
205 	}
206 	else if (current->mm == NULL) {
207 		show_regs(container_of(regs, struct pt_regs, regs));
208 		panic("Segfault with no mm");
209 	}
210 
211 	if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
212 		err = handle_page_fault(address, ip, is_write, is_user,
213 					&si.si_code);
214 	else {
215 		err = -EFAULT;
216 		/*
217 		 * A thread accessed NULL, we get a fault, but CR2 is invalid.
218 		 * This code is used in __do_copy_from_user() of TT mode.
219 		 * XXX tt mode is gone, so maybe this isn't needed any more
220 		 */
221 		address = 0;
222 	}
223 
224 	catcher = current->thread.fault_catcher;
225 	if (!err)
226 		return 0;
227 	else if (catcher != NULL) {
228 		current->thread.fault_addr = (void *) address;
229 		UML_LONGJMP(catcher, 1);
230 	}
231 	else if (current->thread.fault_addr != NULL)
232 		panic("fault_addr set but no fault catcher");
233 	else if (!is_user && arch_fixup(ip, regs))
234 		return 0;
235 
236 	if (!is_user) {
237 		show_regs(container_of(regs, struct pt_regs, regs));
238 		panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
239 		      address, ip);
240 	}
241 
242 	show_segv_info(regs);
243 
244 	if (err == -EACCES) {
245 		si.si_signo = SIGBUS;
246 		si.si_errno = 0;
247 		si.si_code = BUS_ADRERR;
248 		si.si_addr = (void __user *)address;
249 		current->thread.arch.faultinfo = fi;
250 		force_sig_info(SIGBUS, &si, current);
251 	} else {
252 		BUG_ON(err != -EFAULT);
253 		si.si_signo = SIGSEGV;
254 		si.si_addr = (void __user *) address;
255 		current->thread.arch.faultinfo = fi;
256 		force_sig_info(SIGSEGV, &si, current);
257 	}
258 	return 0;
259 }
260 
261 void relay_signal(int sig, struct siginfo *si, struct uml_pt_regs *regs)
262 {
263 	struct faultinfo *fi;
264 	struct siginfo clean_si;
265 
266 	if (!UPT_IS_USER(regs)) {
267 		if (sig == SIGBUS)
268 			printk(KERN_ERR "Bus error - the host /dev/shm or /tmp "
269 			       "mount likely just ran out of space\n");
270 		panic("Kernel mode signal %d", sig);
271 	}
272 
273 	arch_examine_signal(sig, regs);
274 
275 	memset(&clean_si, 0, sizeof(clean_si));
276 	clean_si.si_signo = si->si_signo;
277 	clean_si.si_errno = si->si_errno;
278 	clean_si.si_code = si->si_code;
279 	switch (sig) {
280 	case SIGILL:
281 	case SIGFPE:
282 	case SIGSEGV:
283 	case SIGBUS:
284 	case SIGTRAP:
285 		fi = UPT_FAULTINFO(regs);
286 		clean_si.si_addr = (void __user *) FAULT_ADDRESS(*fi);
287 		current->thread.arch.faultinfo = *fi;
288 #ifdef __ARCH_SI_TRAPNO
289 		clean_si.si_trapno = si->si_trapno;
290 #endif
291 		break;
292 	default:
293 		printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d)\n",
294 			sig, si->si_code);
295 	}
296 
297 	force_sig_info(sig, &clean_si, current);
298 }
299 
300 void bus_handler(int sig, struct siginfo *si, struct uml_pt_regs *regs)
301 {
302 	if (current->thread.fault_catcher != NULL)
303 		UML_LONGJMP(current->thread.fault_catcher, 1);
304 	else
305 		relay_signal(sig, si, regs);
306 }
307 
308 void winch(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
309 {
310 	do_IRQ(WINCH_IRQ, regs);
311 }
312 
313 void trap_init(void)
314 {
315 }
316