xref: /openbmc/linux/arch/sparc/kernel/sun4v_ivec.S (revision 4f3db074)
1/* sun4v_ivec.S: Sun4v interrupt vector handling.
2 *
3 * Copyright (C) 2006 <davem@davemloft.net>
4 */
5
6#include <asm/cpudata.h>
7#include <asm/intr_queue.h>
8#include <asm/pil.h>
9
10	.text
11	.align	32
12
13sun4v_cpu_mondo:
14	/* Head offset in %g2, tail offset in %g4.
15	 * If they are the same, no work.
16	 */
17	mov	INTRQ_CPU_MONDO_HEAD, %g2
18	ldxa	[%g2] ASI_QUEUE, %g2
19	mov	INTRQ_CPU_MONDO_TAIL, %g4
20	ldxa	[%g4] ASI_QUEUE, %g4
21	cmp	%g2, %g4
22	be,pn	%xcc, sun4v_cpu_mondo_queue_empty
23	 nop
24
25	/* Get &trap_block[smp_processor_id()] into %g4.  */
26	ldxa	[%g0] ASI_SCRATCHPAD, %g4
27	sub	%g4, TRAP_PER_CPU_FAULT_INFO, %g4
28
29	/* Get CPU mondo queue base phys address into %g7.  */
30	ldx	[%g4 + TRAP_PER_CPU_CPU_MONDO_PA], %g7
31
32	/* Now get the cross-call arguments and handler PC, same
33	 * layout as sun4u:
34	 *
35	 * 1st 64-bit word: low half is 32-bit PC, put into %g3 and jmpl to it
36	 *                  high half is context arg to MMU flushes, into %g5
37	 * 2nd 64-bit word: 64-bit arg, load into %g1
38	 * 3rd 64-bit word: 64-bit arg, load into %g7
39	 */
40	ldxa	[%g7 + %g2] ASI_PHYS_USE_EC, %g3
41	add	%g2, 0x8, %g2
42	srlx	%g3, 32, %g5
43	ldxa	[%g7 + %g2] ASI_PHYS_USE_EC, %g1
44	add	%g2, 0x8, %g2
45	srl	%g3, 0, %g3
46	ldxa	[%g7 + %g2] ASI_PHYS_USE_EC, %g7
47	add	%g2, 0x40 - 0x8 - 0x8, %g2
48
49	/* Update queue head pointer.  */
50	lduw	[%g4 + TRAP_PER_CPU_CPU_MONDO_QMASK], %g4
51	and	%g2, %g4, %g2
52
53	mov	INTRQ_CPU_MONDO_HEAD, %g4
54	stxa	%g2, [%g4] ASI_QUEUE
55	membar	#Sync
56
57	jmpl	%g3, %g0
58	 nop
59
60sun4v_cpu_mondo_queue_empty:
61	retry
62
63sun4v_dev_mondo:
64	/* Head offset in %g2, tail offset in %g4.  */
65	mov	INTRQ_DEVICE_MONDO_HEAD, %g2
66	ldxa	[%g2] ASI_QUEUE, %g2
67	mov	INTRQ_DEVICE_MONDO_TAIL, %g4
68	ldxa	[%g4] ASI_QUEUE, %g4
69	cmp	%g2, %g4
70	be,pn	%xcc, sun4v_dev_mondo_queue_empty
71	 nop
72
73	/* Get &trap_block[smp_processor_id()] into %g4.  */
74	ldxa	[%g0] ASI_SCRATCHPAD, %g4
75	sub	%g4, TRAP_PER_CPU_FAULT_INFO, %g4
76
77	/* Get DEV mondo queue base phys address into %g5.  */
78	ldx	[%g4 + TRAP_PER_CPU_DEV_MONDO_PA], %g5
79
80	/* Load IVEC into %g3.  */
81	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
82	add	%g2, 0x40, %g2
83
84	/* XXX There can be a full 64-byte block of data here.
85	 * XXX This is how we can get at MSI vector data.
86	 * XXX Current we do not capture this, but when we do we'll
87	 * XXX need to add a 64-byte storage area in the struct ino_bucket
88	 * XXX or the struct irq_desc.
89	 */
90
91	/* Update queue head pointer, this frees up some registers.  */
92	lduw	[%g4 + TRAP_PER_CPU_DEV_MONDO_QMASK], %g4
93	and	%g2, %g4, %g2
94
95	mov	INTRQ_DEVICE_MONDO_HEAD, %g4
96	stxa	%g2, [%g4] ASI_QUEUE
97	membar	#Sync
98
99	TRAP_LOAD_IRQ_WORK_PA(%g1, %g4)
100
101	/* For VIRQs, cookie is encoded as ~bucket_phys_addr  */
102	brlz,pt %g3, 1f
103	 xnor	%g3, %g0, %g4
104
105	/* Get __pa(&ivector_table[IVEC]) into %g4.  */
106	sethi	%hi(ivector_table_pa), %g4
107	ldx	[%g4 + %lo(ivector_table_pa)], %g4
108	sllx	%g3, 4, %g3
109	add	%g4, %g3, %g4
110
1111:	ldx	[%g1], %g2
112	stxa	%g2, [%g4] ASI_PHYS_USE_EC
113	stx	%g4, [%g1]
114
115	/* Signal the interrupt by setting (1 << pil) in %softint.  */
116	wr	%g0, 1 << PIL_DEVICE_IRQ, %set_softint
117
118sun4v_dev_mondo_queue_empty:
119	retry
120
121sun4v_res_mondo:
122	/* Head offset in %g2, tail offset in %g4.  */
123	mov	INTRQ_RESUM_MONDO_HEAD, %g2
124	ldxa	[%g2] ASI_QUEUE, %g2
125	mov	INTRQ_RESUM_MONDO_TAIL, %g4
126	ldxa	[%g4] ASI_QUEUE, %g4
127	cmp	%g2, %g4
128	be,pn	%xcc, sun4v_res_mondo_queue_empty
129	 nop
130
131	/* Get &trap_block[smp_processor_id()] into %g3.  */
132	ldxa	[%g0] ASI_SCRATCHPAD, %g3
133	sub	%g3, TRAP_PER_CPU_FAULT_INFO, %g3
134
135	/* Get RES mondo queue base phys address into %g5.  */
136	ldx	[%g3 + TRAP_PER_CPU_RESUM_MONDO_PA], %g5
137
138	/* Get RES kernel buffer base phys address into %g7.  */
139	ldx	[%g3 + TRAP_PER_CPU_RESUM_KBUF_PA], %g7
140
141	/* If the first word is non-zero, queue is full.  */
142	ldxa	[%g7 + %g2] ASI_PHYS_USE_EC, %g1
143	brnz,pn	%g1, sun4v_res_mondo_queue_full
144	 nop
145
146	lduw	[%g3 + TRAP_PER_CPU_RESUM_QMASK], %g4
147
148	/* Remember this entry's offset in %g1.  */
149	mov	%g2, %g1
150
151	/* Copy 64-byte queue entry into kernel buffer.  */
152	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
153	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
154	add	%g2, 0x08, %g2
155	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
156	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
157	add	%g2, 0x08, %g2
158	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
159	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
160	add	%g2, 0x08, %g2
161	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
162	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
163	add	%g2, 0x08, %g2
164	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
165	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
166	add	%g2, 0x08, %g2
167	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
168	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
169	add	%g2, 0x08, %g2
170	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
171	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
172	add	%g2, 0x08, %g2
173	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
174	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
175	add	%g2, 0x08, %g2
176
177	/* Update queue head pointer.  */
178	and	%g2, %g4, %g2
179
180	mov	INTRQ_RESUM_MONDO_HEAD, %g4
181	stxa	%g2, [%g4] ASI_QUEUE
182	membar	#Sync
183
184	/* Disable interrupts and save register state so we can call
185	 * C code.  The etrap handling will leave %g4 in %l4 for us
186	 * when it's done.
187	 */
188	rdpr	%pil, %g2
189	wrpr	%g0, PIL_NORMAL_MAX, %pil
190	mov	%g1, %g4
191	ba,pt	%xcc, etrap_irq
192	 rd	%pc, %g7
193#ifdef CONFIG_TRACE_IRQFLAGS
194	call		trace_hardirqs_off
195	 nop
196#endif
197	/* Log the event.  */
198	add	%sp, PTREGS_OFF, %o0
199	call	sun4v_resum_error
200	 mov	%l4, %o1
201
202	/* Return from trap.  */
203	ba,pt	%xcc, rtrap_irq
204	 nop
205
206sun4v_res_mondo_queue_empty:
207	retry
208
209sun4v_res_mondo_queue_full:
210	/* The queue is full, consolidate our damage by setting
211	 * the head equal to the tail.  We'll just trap again otherwise.
212	 * Call C code to log the event.
213	 */
214	mov	INTRQ_RESUM_MONDO_HEAD, %g2
215	stxa	%g4, [%g2] ASI_QUEUE
216	membar	#Sync
217
218	rdpr	%pil, %g2
219	wrpr	%g0, PIL_NORMAL_MAX, %pil
220	ba,pt	%xcc, etrap_irq
221	 rd	%pc, %g7
222#ifdef CONFIG_TRACE_IRQFLAGS
223	call		trace_hardirqs_off
224	 nop
225#endif
226	call	sun4v_resum_overflow
227	 add	%sp, PTREGS_OFF, %o0
228
229	ba,pt	%xcc, rtrap_irq
230	 nop
231
232sun4v_nonres_mondo:
233	/* Head offset in %g2, tail offset in %g4.  */
234	mov	INTRQ_NONRESUM_MONDO_HEAD, %g2
235	ldxa	[%g2] ASI_QUEUE, %g2
236	mov	INTRQ_NONRESUM_MONDO_TAIL, %g4
237	ldxa	[%g4] ASI_QUEUE, %g4
238	cmp	%g2, %g4
239	be,pn	%xcc, sun4v_nonres_mondo_queue_empty
240	 nop
241
242	/* Get &trap_block[smp_processor_id()] into %g3.  */
243	ldxa	[%g0] ASI_SCRATCHPAD, %g3
244	sub	%g3, TRAP_PER_CPU_FAULT_INFO, %g3
245
246	/* Get RES mondo queue base phys address into %g5.  */
247	ldx	[%g3 + TRAP_PER_CPU_NONRESUM_MONDO_PA], %g5
248
249	/* Get RES kernel buffer base phys address into %g7.  */
250	ldx	[%g3 + TRAP_PER_CPU_NONRESUM_KBUF_PA], %g7
251
252	/* If the first word is non-zero, queue is full.  */
253	ldxa	[%g7 + %g2] ASI_PHYS_USE_EC, %g1
254	brnz,pn	%g1, sun4v_nonres_mondo_queue_full
255	 nop
256
257	lduw	[%g3 + TRAP_PER_CPU_NONRESUM_QMASK], %g4
258
259	/* Remember this entry's offset in %g1.  */
260	mov	%g2, %g1
261
262	/* Copy 64-byte queue entry into kernel buffer.  */
263	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
264	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
265	add	%g2, 0x08, %g2
266	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
267	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
268	add	%g2, 0x08, %g2
269	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
270	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
271	add	%g2, 0x08, %g2
272	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
273	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
274	add	%g2, 0x08, %g2
275	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
276	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
277	add	%g2, 0x08, %g2
278	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
279	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
280	add	%g2, 0x08, %g2
281	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
282	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
283	add	%g2, 0x08, %g2
284	ldxa	[%g5 + %g2] ASI_PHYS_USE_EC, %g3
285	stxa	%g3, [%g7 + %g2] ASI_PHYS_USE_EC
286	add	%g2, 0x08, %g2
287
288	/* Update queue head pointer.  */
289	and	%g2, %g4, %g2
290
291	mov	INTRQ_NONRESUM_MONDO_HEAD, %g4
292	stxa	%g2, [%g4] ASI_QUEUE
293	membar	#Sync
294
295	/* Disable interrupts and save register state so we can call
296	 * C code.  The etrap handling will leave %g4 in %l4 for us
297	 * when it's done.
298	 */
299	rdpr	%pil, %g2
300	wrpr	%g0, PIL_NORMAL_MAX, %pil
301	mov	%g1, %g4
302	ba,pt	%xcc, etrap_irq
303	 rd	%pc, %g7
304#ifdef CONFIG_TRACE_IRQFLAGS
305	call		trace_hardirqs_off
306	 nop
307#endif
308	/* Log the event.  */
309	add	%sp, PTREGS_OFF, %o0
310	call	sun4v_nonresum_error
311	 mov	%l4, %o1
312
313	/* Return from trap.  */
314	ba,pt	%xcc, rtrap_irq
315	 nop
316
317sun4v_nonres_mondo_queue_empty:
318	retry
319
320sun4v_nonres_mondo_queue_full:
321	/* The queue is full, consolidate our damage by setting
322	 * the head equal to the tail.  We'll just trap again otherwise.
323	 * Call C code to log the event.
324	 */
325	mov	INTRQ_NONRESUM_MONDO_HEAD, %g2
326	stxa	%g4, [%g2] ASI_QUEUE
327	membar	#Sync
328
329	rdpr	%pil, %g2
330	wrpr	%g0, PIL_NORMAL_MAX, %pil
331	ba,pt	%xcc, etrap_irq
332	 rd	%pc, %g7
333#ifdef CONFIG_TRACE_IRQFLAGS
334	call		trace_hardirqs_off
335	 nop
336#endif
337	call	sun4v_nonresum_overflow
338	 add	%sp, PTREGS_OFF, %o0
339
340	ba,pt	%xcc, rtrap_irq
341	 nop
342