xref: /openbmc/linux/arch/sparc/kernel/sun4m_irq.c (revision 51ad5b54)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * sun4m irq support
4  *
5  *  djhr: Hacked out of irq.c into a CPU dependent version.
6  *
7  *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
8  *  Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
9  *  Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
10  *  Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
11  */
12 
13 #include <linux/slab.h>
14 #include <linux/sched/debug.h>
15 #include <linux/pgtable.h>
16 
17 #include <asm/timer.h>
18 #include <asm/traps.h>
19 #include <asm/pgalloc.h>
20 #include <asm/irq.h>
21 #include <asm/io.h>
22 #include <asm/cacheflush.h>
23 
24 #include "irq.h"
25 #include "kernel.h"
26 
27 /* Sample sun4m IRQ layout:
28  *
29  * 0x22 - Power
30  * 0x24 - ESP SCSI
31  * 0x26 - Lance ethernet
32  * 0x2b - Floppy
33  * 0x2c - Zilog uart
34  * 0x32 - SBUS level 0
35  * 0x33 - Parallel port, SBUS level 1
36  * 0x35 - SBUS level 2
37  * 0x37 - SBUS level 3
38  * 0x39 - Audio, Graphics card, SBUS level 4
39  * 0x3b - SBUS level 5
40  * 0x3d - SBUS level 6
41  *
42  * Each interrupt source has a mask bit in the interrupt registers.
43  * When the mask bit is set, this blocks interrupt deliver.  So you
44  * clear the bit to enable the interrupt.
45  *
46  * Interrupts numbered less than 0x10 are software triggered interrupts
47  * and unused by Linux.
48  *
49  * Interrupt level assignment on sun4m:
50  *
51  *	level		source
52  * ------------------------------------------------------------
53  *	  1		softint-1
54  *	  2		softint-2, VME/SBUS level 1
55  *	  3		softint-3, VME/SBUS level 2
56  *	  4		softint-4, onboard SCSI
57  *	  5		softint-5, VME/SBUS level 3
58  *	  6		softint-6, onboard ETHERNET
59  *	  7		softint-7, VME/SBUS level 4
60  *	  8		softint-8, onboard VIDEO
61  *	  9		softint-9, VME/SBUS level 5, Module Interrupt
62  *	 10		softint-10, system counter/timer
63  *	 11		softint-11, VME/SBUS level 6, Floppy
64  *	 12		softint-12, Keyboard/Mouse, Serial
65  *	 13		softint-13, VME/SBUS level 7, ISDN Audio
66  *	 14		softint-14, per-processor counter/timer
67  *	 15		softint-15, Asynchronous Errors (broadcast)
68  *
69  * Each interrupt source is masked distinctly in the sun4m interrupt
70  * registers.  The PIL level alone is therefore ambiguous, since multiple
71  * interrupt sources map to a single PIL.
72  *
73  * This ambiguity is resolved in the 'intr' property for device nodes
74  * in the OF device tree.  Each 'intr' property entry is composed of
75  * two 32-bit words.  The first word is the IRQ priority value, which
76  * is what we're intersted in.  The second word is the IRQ vector, which
77  * is unused.
78  *
79  * The low 4 bits of the IRQ priority indicate the PIL, and the upper
80  * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled.  0x20
81  * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
82  *
83  * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
84  * whereas a value of 0x33 is SBUS level 2.  Here are some sample
85  * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
86  * Tadpole S3 GX systems.
87  *
88  * esp:		0x24	onboard ESP SCSI
89  * le:		0x26	onboard Lance ETHERNET
90  * p9100:	0x32	SBUS level 1 P9100 video
91  * bpp:		0x33	SBUS level 2 BPP parallel port device
92  * DBRI:	0x39	SBUS level 5 DBRI ISDN audio
93  * SUNW,leo:	0x39	SBUS level 5 LEO video
94  * pcmcia:	0x3b	SBUS level 6 PCMCIA controller
95  * uctrl:	0x3b	SBUS level 6 UCTRL device
96  * modem:	0x3d	SBUS level 7 MODEM
97  * zs:		0x2c	onboard keyboard/mouse/serial
98  * floppy:	0x2b	onboard Floppy
99  * power:	0x22	onboard power device (XXX unknown mask bit XXX)
100  */
101 
102 
103 /* Code in entry.S needs to get at these register mappings.  */
104 struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
105 struct sun4m_irq_global __iomem *sun4m_irq_global;
106 
107 struct sun4m_handler_data {
108 	bool    percpu;
109 	long    mask;
110 };
111 
112 /* Dave Redman (djhr@tadpole.co.uk)
113  * The sun4m interrupt registers.
114  */
115 #define SUN4M_INT_ENABLE	0x80000000
116 #define SUN4M_INT_E14		0x00000080
117 #define SUN4M_INT_E10		0x00080000
118 
119 #define	SUN4M_INT_MASKALL	0x80000000	  /* mask all interrupts */
120 #define	SUN4M_INT_MODULE_ERR	0x40000000	  /* module error */
121 #define	SUN4M_INT_M2S_WRITE_ERR	0x20000000	  /* write buffer error */
122 #define	SUN4M_INT_ECC_ERR	0x10000000	  /* ecc memory error */
123 #define	SUN4M_INT_VME_ERR	0x08000000	  /* vme async error */
124 #define	SUN4M_INT_FLOPPY	0x00400000	  /* floppy disk */
125 #define	SUN4M_INT_MODULE	0x00200000	  /* module interrupt */
126 #define	SUN4M_INT_VIDEO		0x00100000	  /* onboard video */
127 #define	SUN4M_INT_REALTIME	0x00080000	  /* system timer */
128 #define	SUN4M_INT_SCSI		0x00040000	  /* onboard scsi */
129 #define	SUN4M_INT_AUDIO		0x00020000	  /* audio/isdn */
130 #define	SUN4M_INT_ETHERNET	0x00010000	  /* onboard ethernet */
131 #define	SUN4M_INT_SERIAL	0x00008000	  /* serial ports */
132 #define	SUN4M_INT_KBDMS		0x00004000	  /* keyboard/mouse */
133 #define	SUN4M_INT_SBUSBITS	0x00003F80	  /* sbus int bits */
134 #define	SUN4M_INT_VMEBITS	0x0000007F	  /* vme int bits */
135 
136 #define	SUN4M_INT_ERROR		(SUN4M_INT_MODULE_ERR |    \
137 				 SUN4M_INT_M2S_WRITE_ERR | \
138 				 SUN4M_INT_ECC_ERR |       \
139 				 SUN4M_INT_VME_ERR)
140 
141 #define SUN4M_INT_SBUS(x)	(1 << (x+7))
142 #define SUN4M_INT_VME(x)	(1 << (x))
143 
144 /* Interrupt levels used by OBP */
145 #define	OBP_INT_LEVEL_SOFT	0x10
146 #define	OBP_INT_LEVEL_ONBOARD	0x20
147 #define	OBP_INT_LEVEL_SBUS	0x30
148 #define	OBP_INT_LEVEL_VME	0x40
149 
150 #define SUN4M_TIMER_IRQ         (OBP_INT_LEVEL_ONBOARD | 10)
151 #define SUN4M_PROFILE_IRQ       (OBP_INT_LEVEL_ONBOARD | 14)
152 
153 static unsigned long sun4m_imask[0x50] = {
154 	/* 0x00 - SMP */
155 	0,  SUN4M_SOFT_INT(1),
156 	SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
157 	SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
158 	SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
159 	SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
160 	SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
161 	SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
162 	SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
163 	/* 0x10 - soft */
164 	0,  SUN4M_SOFT_INT(1),
165 	SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
166 	SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
167 	SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
168 	SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
169 	SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
170 	SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
171 	SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
172 	/* 0x20 - onboard */
173 	0, 0, 0, 0,
174 	SUN4M_INT_SCSI,  0, SUN4M_INT_ETHERNET, 0,
175 	SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
176 	SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
177 	(SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
178 	SUN4M_INT_AUDIO, SUN4M_INT_E14, SUN4M_INT_MODULE_ERR,
179 	/* 0x30 - sbus */
180 	0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
181 	0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
182 	0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
183 	0, SUN4M_INT_SBUS(6), 0, 0,
184 	/* 0x40 - vme */
185 	0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
186 	0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
187 	0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
188 	0, SUN4M_INT_VME(6), 0, 0
189 };
190 
191 static void sun4m_mask_irq(struct irq_data *data)
192 {
193 	struct sun4m_handler_data *handler_data;
194 	int cpu = smp_processor_id();
195 
196 	handler_data = irq_data_get_irq_handler_data(data);
197 	if (handler_data->mask) {
198 		unsigned long flags;
199 
200 		local_irq_save(flags);
201 		if (handler_data->percpu) {
202 			sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->set);
203 		} else {
204 			sbus_writel(handler_data->mask, &sun4m_irq_global->mask_set);
205 		}
206 		local_irq_restore(flags);
207 	}
208 }
209 
210 static void sun4m_unmask_irq(struct irq_data *data)
211 {
212 	struct sun4m_handler_data *handler_data;
213 	int cpu = smp_processor_id();
214 
215 	handler_data = irq_data_get_irq_handler_data(data);
216 	if (handler_data->mask) {
217 		unsigned long flags;
218 
219 		local_irq_save(flags);
220 		if (handler_data->percpu) {
221 			sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->clear);
222 		} else {
223 			sbus_writel(handler_data->mask, &sun4m_irq_global->mask_clear);
224 		}
225 		local_irq_restore(flags);
226 	}
227 }
228 
229 static unsigned int sun4m_startup_irq(struct irq_data *data)
230 {
231 	irq_link(data->irq);
232 	sun4m_unmask_irq(data);
233 	return 0;
234 }
235 
236 static void sun4m_shutdown_irq(struct irq_data *data)
237 {
238 	sun4m_mask_irq(data);
239 	irq_unlink(data->irq);
240 }
241 
242 static struct irq_chip sun4m_irq = {
243 	.name		= "sun4m",
244 	.irq_startup	= sun4m_startup_irq,
245 	.irq_shutdown	= sun4m_shutdown_irq,
246 	.irq_mask	= sun4m_mask_irq,
247 	.irq_unmask	= sun4m_unmask_irq,
248 };
249 
250 
251 static unsigned int sun4m_build_device_irq(struct platform_device *op,
252 					   unsigned int real_irq)
253 {
254 	struct sun4m_handler_data *handler_data;
255 	unsigned int irq;
256 	unsigned int pil;
257 
258 	if (real_irq >= OBP_INT_LEVEL_VME) {
259 		prom_printf("Bogus sun4m IRQ %u\n", real_irq);
260 		prom_halt();
261 	}
262 	pil = (real_irq & 0xf);
263 	irq = irq_alloc(real_irq, pil);
264 
265 	if (irq == 0)
266 		goto out;
267 
268 	handler_data = irq_get_handler_data(irq);
269 	if (unlikely(handler_data))
270 		goto out;
271 
272 	handler_data = kzalloc(sizeof(struct sun4m_handler_data), GFP_ATOMIC);
273 	if (unlikely(!handler_data)) {
274 		prom_printf("IRQ: kzalloc(sun4m_handler_data) failed.\n");
275 		prom_halt();
276 	}
277 
278 	handler_data->mask = sun4m_imask[real_irq];
279 	handler_data->percpu = real_irq < OBP_INT_LEVEL_ONBOARD;
280 	irq_set_chip_and_handler_name(irq, &sun4m_irq,
281 	                              handle_level_irq, "level");
282 	irq_set_handler_data(irq, handler_data);
283 
284 out:
285 	return irq;
286 }
287 
288 struct sun4m_timer_percpu {
289 	u32		l14_limit;
290 	u32		l14_count;
291 	u32		l14_limit_noclear;
292 	u32		user_timer_start_stop;
293 };
294 
295 static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
296 
297 struct sun4m_timer_global {
298 	u32		l10_limit;
299 	u32		l10_count;
300 	u32		l10_limit_noclear;
301 	u32		reserved;
302 	u32		timer_config;
303 };
304 
305 static struct sun4m_timer_global __iomem *timers_global;
306 
307 static void sun4m_clear_clock_irq(void)
308 {
309 	sbus_readl(&timers_global->l10_limit);
310 }
311 
312 void sun4m_nmi(struct pt_regs *regs)
313 {
314 	unsigned long afsr, afar, si;
315 
316 	printk(KERN_ERR "Aieee: sun4m NMI received!\n");
317 	/* XXX HyperSparc hack XXX */
318 	__asm__ __volatile__("mov 0x500, %%g1\n\t"
319 			     "lda [%%g1] 0x4, %0\n\t"
320 			     "mov 0x600, %%g1\n\t"
321 			     "lda [%%g1] 0x4, %1\n\t" :
322 			     "=r" (afsr), "=r" (afar));
323 	printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
324 	si = sbus_readl(&sun4m_irq_global->pending);
325 	printk(KERN_ERR "si=%08lx\n", si);
326 	if (si & SUN4M_INT_MODULE_ERR)
327 		printk(KERN_ERR "Module async error\n");
328 	if (si & SUN4M_INT_M2S_WRITE_ERR)
329 		printk(KERN_ERR "MBus/SBus async error\n");
330 	if (si & SUN4M_INT_ECC_ERR)
331 		printk(KERN_ERR "ECC memory error\n");
332 	if (si & SUN4M_INT_VME_ERR)
333 		printk(KERN_ERR "VME async error\n");
334 	printk(KERN_ERR "you lose buddy boy...\n");
335 	show_regs(regs);
336 	prom_halt();
337 }
338 
339 void sun4m_unmask_profile_irq(void)
340 {
341 	unsigned long flags;
342 
343 	local_irq_save(flags);
344 	sbus_writel(sun4m_imask[SUN4M_PROFILE_IRQ], &sun4m_irq_global->mask_clear);
345 	local_irq_restore(flags);
346 }
347 
348 void sun4m_clear_profile_irq(int cpu)
349 {
350 	sbus_readl(&timers_percpu[cpu]->l14_limit);
351 }
352 
353 static void sun4m_load_profile_irq(int cpu, unsigned int limit)
354 {
355 	unsigned int value = limit ? timer_value(limit) : 0;
356 	sbus_writel(value, &timers_percpu[cpu]->l14_limit);
357 }
358 
359 static void __init sun4m_init_timers(void)
360 {
361 	struct device_node *dp = of_find_node_by_name(NULL, "counter");
362 	int i, err, len, num_cpu_timers;
363 	unsigned int irq;
364 	const u32 *addr;
365 
366 	if (!dp) {
367 		printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
368 		return;
369 	}
370 
371 	addr = of_get_property(dp, "address", &len);
372 	of_node_put(dp);
373 	if (!addr) {
374 		printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
375 		return;
376 	}
377 
378 	num_cpu_timers = (len / sizeof(u32)) - 1;
379 	for (i = 0; i < num_cpu_timers; i++) {
380 		timers_percpu[i] = (void __iomem *)
381 			(unsigned long) addr[i];
382 	}
383 	timers_global = (void __iomem *)
384 		(unsigned long) addr[num_cpu_timers];
385 
386 	/* Every per-cpu timer works in timer mode */
387 	sbus_writel(0x00000000, &timers_global->timer_config);
388 
389 #ifdef CONFIG_SMP
390 	sparc_config.cs_period = SBUS_CLOCK_RATE * 2;  /* 2 seconds */
391 	sparc_config.features |= FEAT_L14_ONESHOT;
392 #else
393 	sparc_config.cs_period = SBUS_CLOCK_RATE / HZ; /* 1/HZ sec  */
394 	sparc_config.features |= FEAT_L10_CLOCKEVENT;
395 #endif
396 	sparc_config.features |= FEAT_L10_CLOCKSOURCE;
397 	sbus_writel(timer_value(sparc_config.cs_period),
398 	            &timers_global->l10_limit);
399 
400 	master_l10_counter = &timers_global->l10_count;
401 
402 	irq = sun4m_build_device_irq(NULL, SUN4M_TIMER_IRQ);
403 
404 	err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL);
405 	if (err) {
406 		printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
407 			err);
408 		return;
409 	}
410 
411 	for (i = 0; i < num_cpu_timers; i++)
412 		sbus_writel(0, &timers_percpu[i]->l14_limit);
413 	if (num_cpu_timers == 4)
414 		sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
415 
416 #ifdef CONFIG_SMP
417 	{
418 		unsigned long flags;
419 		struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
420 
421 		/* For SMP we use the level 14 ticker, however the bootup code
422 		 * has copied the firmware's level 14 vector into the boot cpu's
423 		 * trap table, we must fix this now or we get squashed.
424 		 */
425 		local_irq_save(flags);
426 		trap_table->inst_one = lvl14_save[0];
427 		trap_table->inst_two = lvl14_save[1];
428 		trap_table->inst_three = lvl14_save[2];
429 		trap_table->inst_four = lvl14_save[3];
430 		local_ops->cache_all();
431 		local_irq_restore(flags);
432 	}
433 #endif
434 }
435 
436 void __init sun4m_init_IRQ(void)
437 {
438 	struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
439 	int len, i, mid, num_cpu_iregs;
440 	const u32 *addr;
441 
442 	if (!dp) {
443 		printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
444 		return;
445 	}
446 
447 	addr = of_get_property(dp, "address", &len);
448 	of_node_put(dp);
449 	if (!addr) {
450 		printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
451 		return;
452 	}
453 
454 	num_cpu_iregs = (len / sizeof(u32)) - 1;
455 	for (i = 0; i < num_cpu_iregs; i++) {
456 		sun4m_irq_percpu[i] = (void __iomem *)
457 			(unsigned long) addr[i];
458 	}
459 	sun4m_irq_global = (void __iomem *)
460 		(unsigned long) addr[num_cpu_iregs];
461 
462 	local_irq_disable();
463 
464 	sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
465 	for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
466 		sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
467 
468 	if (num_cpu_iregs == 4)
469 		sbus_writel(0, &sun4m_irq_global->interrupt_target);
470 
471 	sparc_config.init_timers      = sun4m_init_timers;
472 	sparc_config.build_device_irq = sun4m_build_device_irq;
473 	sparc_config.clock_rate       = SBUS_CLOCK_RATE;
474 	sparc_config.clear_clock_irq  = sun4m_clear_clock_irq;
475 	sparc_config.load_profile_irq = sun4m_load_profile_irq;
476 
477 
478 	/* Cannot enable interrupts until OBP ticker is disabled. */
479 }
480