1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * sbus.c: UltraSparc SBUS controller support. 4 * 5 * Copyright (C) 1999 David S. Miller (davem@redhat.com) 6 */ 7 8 #include <linux/kernel.h> 9 #include <linux/types.h> 10 #include <linux/mm.h> 11 #include <linux/spinlock.h> 12 #include <linux/slab.h> 13 #include <linux/export.h> 14 #include <linux/init.h> 15 #include <linux/interrupt.h> 16 #include <linux/of.h> 17 #include <linux/of_device.h> 18 19 #include <asm/page.h> 20 #include <asm/io.h> 21 #include <asm/upa.h> 22 #include <asm/cache.h> 23 #include <asm/dma.h> 24 #include <asm/irq.h> 25 #include <asm/prom.h> 26 #include <asm/oplib.h> 27 #include <asm/starfire.h> 28 29 #include "iommu_common.h" 30 31 #define MAP_BASE ((u32)0xc0000000) 32 33 /* Offsets from iommu_regs */ 34 #define SYSIO_IOMMUREG_BASE 0x2400UL 35 #define IOMMU_CONTROL (0x2400UL - 0x2400UL) /* IOMMU control register */ 36 #define IOMMU_TSBBASE (0x2408UL - 0x2400UL) /* TSB base address register */ 37 #define IOMMU_FLUSH (0x2410UL - 0x2400UL) /* IOMMU flush register */ 38 #define IOMMU_VADIAG (0x4400UL - 0x2400UL) /* SBUS virtual address diagnostic */ 39 #define IOMMU_TAGCMP (0x4408UL - 0x2400UL) /* TLB tag compare diagnostics */ 40 #define IOMMU_LRUDIAG (0x4500UL - 0x2400UL) /* IOMMU LRU queue diagnostics */ 41 #define IOMMU_TAGDIAG (0x4580UL - 0x2400UL) /* TLB tag diagnostics */ 42 #define IOMMU_DRAMDIAG (0x4600UL - 0x2400UL) /* TLB data RAM diagnostics */ 43 44 #define IOMMU_DRAM_VALID (1UL << 30UL) 45 46 /* Offsets from strbuf_regs */ 47 #define SYSIO_STRBUFREG_BASE 0x2800UL 48 #define STRBUF_CONTROL (0x2800UL - 0x2800UL) /* Control */ 49 #define STRBUF_PFLUSH (0x2808UL - 0x2800UL) /* Page flush/invalidate */ 50 #define STRBUF_FSYNC (0x2810UL - 0x2800UL) /* Flush synchronization */ 51 #define STRBUF_DRAMDIAG (0x5000UL - 0x2800UL) /* data RAM diagnostic */ 52 #define STRBUF_ERRDIAG (0x5400UL - 0x2800UL) /* error status diagnostics */ 53 #define STRBUF_PTAGDIAG (0x5800UL - 0x2800UL) /* Page tag diagnostics */ 54 #define STRBUF_LTAGDIAG (0x5900UL - 0x2800UL) /* Line tag diagnostics */ 55 56 #define STRBUF_TAG_VALID 0x02UL 57 58 /* Enable 64-bit DVMA mode for the given device. */ 59 void sbus_set_sbus64(struct device *dev, int bursts) 60 { 61 struct iommu *iommu = dev->archdata.iommu; 62 struct platform_device *op = to_platform_device(dev); 63 const struct linux_prom_registers *regs; 64 unsigned long cfg_reg; 65 int slot; 66 u64 val; 67 68 regs = of_get_property(op->dev.of_node, "reg", NULL); 69 if (!regs) { 70 printk(KERN_ERR "sbus_set_sbus64: Cannot find regs for %pOF\n", 71 op->dev.of_node); 72 return; 73 } 74 slot = regs->which_io; 75 76 cfg_reg = iommu->write_complete_reg; 77 switch (slot) { 78 case 0: 79 cfg_reg += 0x20UL; 80 break; 81 case 1: 82 cfg_reg += 0x28UL; 83 break; 84 case 2: 85 cfg_reg += 0x30UL; 86 break; 87 case 3: 88 cfg_reg += 0x38UL; 89 break; 90 case 13: 91 cfg_reg += 0x40UL; 92 break; 93 case 14: 94 cfg_reg += 0x48UL; 95 break; 96 case 15: 97 cfg_reg += 0x50UL; 98 break; 99 100 default: 101 return; 102 } 103 104 val = upa_readq(cfg_reg); 105 if (val & (1UL << 14UL)) { 106 /* Extended transfer mode already enabled. */ 107 return; 108 } 109 110 val |= (1UL << 14UL); 111 112 if (bursts & DMA_BURST8) 113 val |= (1UL << 1UL); 114 if (bursts & DMA_BURST16) 115 val |= (1UL << 2UL); 116 if (bursts & DMA_BURST32) 117 val |= (1UL << 3UL); 118 if (bursts & DMA_BURST64) 119 val |= (1UL << 4UL); 120 upa_writeq(val, cfg_reg); 121 } 122 EXPORT_SYMBOL(sbus_set_sbus64); 123 124 /* INO number to IMAP register offset for SYSIO external IRQ's. 125 * This should conform to both Sunfire/Wildfire server and Fusion 126 * desktop designs. 127 */ 128 #define SYSIO_IMAP_SLOT0 0x2c00UL 129 #define SYSIO_IMAP_SLOT1 0x2c08UL 130 #define SYSIO_IMAP_SLOT2 0x2c10UL 131 #define SYSIO_IMAP_SLOT3 0x2c18UL 132 #define SYSIO_IMAP_SCSI 0x3000UL 133 #define SYSIO_IMAP_ETH 0x3008UL 134 #define SYSIO_IMAP_BPP 0x3010UL 135 #define SYSIO_IMAP_AUDIO 0x3018UL 136 #define SYSIO_IMAP_PFAIL 0x3020UL 137 #define SYSIO_IMAP_KMS 0x3028UL 138 #define SYSIO_IMAP_FLPY 0x3030UL 139 #define SYSIO_IMAP_SHW 0x3038UL 140 #define SYSIO_IMAP_KBD 0x3040UL 141 #define SYSIO_IMAP_MS 0x3048UL 142 #define SYSIO_IMAP_SER 0x3050UL 143 #define SYSIO_IMAP_TIM0 0x3060UL 144 #define SYSIO_IMAP_TIM1 0x3068UL 145 #define SYSIO_IMAP_UE 0x3070UL 146 #define SYSIO_IMAP_CE 0x3078UL 147 #define SYSIO_IMAP_SBERR 0x3080UL 148 #define SYSIO_IMAP_PMGMT 0x3088UL 149 #define SYSIO_IMAP_GFX 0x3090UL 150 #define SYSIO_IMAP_EUPA 0x3098UL 151 152 #define bogon ((unsigned long) -1) 153 static unsigned long sysio_irq_offsets[] = { 154 /* SBUS Slot 0 --> 3, level 1 --> 7 */ 155 SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, 156 SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, 157 SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, 158 SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, 159 SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, 160 SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, 161 SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, 162 SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, 163 164 /* Onboard devices (not relevant/used on SunFire). */ 165 SYSIO_IMAP_SCSI, 166 SYSIO_IMAP_ETH, 167 SYSIO_IMAP_BPP, 168 bogon, 169 SYSIO_IMAP_AUDIO, 170 SYSIO_IMAP_PFAIL, 171 bogon, 172 bogon, 173 SYSIO_IMAP_KMS, 174 SYSIO_IMAP_FLPY, 175 SYSIO_IMAP_SHW, 176 SYSIO_IMAP_KBD, 177 SYSIO_IMAP_MS, 178 SYSIO_IMAP_SER, 179 bogon, 180 bogon, 181 SYSIO_IMAP_TIM0, 182 SYSIO_IMAP_TIM1, 183 bogon, 184 bogon, 185 SYSIO_IMAP_UE, 186 SYSIO_IMAP_CE, 187 SYSIO_IMAP_SBERR, 188 SYSIO_IMAP_PMGMT, 189 }; 190 191 #undef bogon 192 193 #define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets) 194 195 /* Convert Interrupt Mapping register pointer to associated 196 * Interrupt Clear register pointer, SYSIO specific version. 197 */ 198 #define SYSIO_ICLR_UNUSED0 0x3400UL 199 #define SYSIO_ICLR_SLOT0 0x3408UL 200 #define SYSIO_ICLR_SLOT1 0x3448UL 201 #define SYSIO_ICLR_SLOT2 0x3488UL 202 #define SYSIO_ICLR_SLOT3 0x34c8UL 203 static unsigned long sysio_imap_to_iclr(unsigned long imap) 204 { 205 unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0; 206 return imap + diff; 207 } 208 209 static unsigned int sbus_build_irq(struct platform_device *op, unsigned int ino) 210 { 211 struct iommu *iommu = op->dev.archdata.iommu; 212 unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; 213 unsigned long imap, iclr; 214 int sbus_level = 0; 215 216 imap = sysio_irq_offsets[ino]; 217 if (imap == ((unsigned long)-1)) { 218 prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n", 219 ino); 220 prom_halt(); 221 } 222 imap += reg_base; 223 224 /* SYSIO inconsistency. For external SLOTS, we have to select 225 * the right ICLR register based upon the lower SBUS irq level 226 * bits. 227 */ 228 if (ino >= 0x20) { 229 iclr = sysio_imap_to_iclr(imap); 230 } else { 231 int sbus_slot = (ino & 0x18)>>3; 232 233 sbus_level = ino & 0x7; 234 235 switch(sbus_slot) { 236 case 0: 237 iclr = reg_base + SYSIO_ICLR_SLOT0; 238 break; 239 case 1: 240 iclr = reg_base + SYSIO_ICLR_SLOT1; 241 break; 242 case 2: 243 iclr = reg_base + SYSIO_ICLR_SLOT2; 244 break; 245 default: 246 case 3: 247 iclr = reg_base + SYSIO_ICLR_SLOT3; 248 break; 249 } 250 251 iclr += ((unsigned long)sbus_level - 1UL) * 8UL; 252 } 253 return build_irq(sbus_level, iclr, imap); 254 } 255 256 /* Error interrupt handling. */ 257 #define SYSIO_UE_AFSR 0x0030UL 258 #define SYSIO_UE_AFAR 0x0038UL 259 #define SYSIO_UEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */ 260 #define SYSIO_UEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */ 261 #define SYSIO_UEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */ 262 #define SYSIO_UEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO is cause */ 263 #define SYSIO_UEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */ 264 #define SYSIO_UEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/ 265 #define SYSIO_UEAFSR_RESV1 0x03ff000000000000UL /* Reserved */ 266 #define SYSIO_UEAFSR_DOFF 0x0000e00000000000UL /* Doubleword Offset */ 267 #define SYSIO_UEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */ 268 #define SYSIO_UEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */ 269 #define SYSIO_UEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */ 270 static irqreturn_t sysio_ue_handler(int irq, void *dev_id) 271 { 272 struct platform_device *op = dev_id; 273 struct iommu *iommu = op->dev.archdata.iommu; 274 unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; 275 unsigned long afsr_reg, afar_reg; 276 unsigned long afsr, afar, error_bits; 277 int reported, portid; 278 279 afsr_reg = reg_base + SYSIO_UE_AFSR; 280 afar_reg = reg_base + SYSIO_UE_AFAR; 281 282 /* Latch error status. */ 283 afsr = upa_readq(afsr_reg); 284 afar = upa_readq(afar_reg); 285 286 /* Clear primary/secondary error status bits. */ 287 error_bits = afsr & 288 (SYSIO_UEAFSR_PPIO | SYSIO_UEAFSR_PDRD | SYSIO_UEAFSR_PDWR | 289 SYSIO_UEAFSR_SPIO | SYSIO_UEAFSR_SDRD | SYSIO_UEAFSR_SDWR); 290 upa_writeq(error_bits, afsr_reg); 291 292 portid = of_getintprop_default(op->dev.of_node, "portid", -1); 293 294 /* Log the error. */ 295 printk("SYSIO[%x]: Uncorrectable ECC Error, primary error type[%s]\n", 296 portid, 297 (((error_bits & SYSIO_UEAFSR_PPIO) ? 298 "PIO" : 299 ((error_bits & SYSIO_UEAFSR_PDRD) ? 300 "DVMA Read" : 301 ((error_bits & SYSIO_UEAFSR_PDWR) ? 302 "DVMA Write" : "???"))))); 303 printk("SYSIO[%x]: DOFF[%lx] SIZE[%lx] MID[%lx]\n", 304 portid, 305 (afsr & SYSIO_UEAFSR_DOFF) >> 45UL, 306 (afsr & SYSIO_UEAFSR_SIZE) >> 42UL, 307 (afsr & SYSIO_UEAFSR_MID) >> 37UL); 308 printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); 309 printk("SYSIO[%x]: Secondary UE errors [", portid); 310 reported = 0; 311 if (afsr & SYSIO_UEAFSR_SPIO) { 312 reported++; 313 printk("(PIO)"); 314 } 315 if (afsr & SYSIO_UEAFSR_SDRD) { 316 reported++; 317 printk("(DVMA Read)"); 318 } 319 if (afsr & SYSIO_UEAFSR_SDWR) { 320 reported++; 321 printk("(DVMA Write)"); 322 } 323 if (!reported) 324 printk("(none)"); 325 printk("]\n"); 326 327 return IRQ_HANDLED; 328 } 329 330 #define SYSIO_CE_AFSR 0x0040UL 331 #define SYSIO_CE_AFAR 0x0048UL 332 #define SYSIO_CEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */ 333 #define SYSIO_CEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */ 334 #define SYSIO_CEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */ 335 #define SYSIO_CEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO cause */ 336 #define SYSIO_CEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */ 337 #define SYSIO_CEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/ 338 #define SYSIO_CEAFSR_RESV1 0x0300000000000000UL /* Reserved */ 339 #define SYSIO_CEAFSR_ESYND 0x00ff000000000000UL /* Syndrome Bits */ 340 #define SYSIO_CEAFSR_DOFF 0x0000e00000000000UL /* Double Offset */ 341 #define SYSIO_CEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */ 342 #define SYSIO_CEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */ 343 #define SYSIO_CEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */ 344 static irqreturn_t sysio_ce_handler(int irq, void *dev_id) 345 { 346 struct platform_device *op = dev_id; 347 struct iommu *iommu = op->dev.archdata.iommu; 348 unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; 349 unsigned long afsr_reg, afar_reg; 350 unsigned long afsr, afar, error_bits; 351 int reported, portid; 352 353 afsr_reg = reg_base + SYSIO_CE_AFSR; 354 afar_reg = reg_base + SYSIO_CE_AFAR; 355 356 /* Latch error status. */ 357 afsr = upa_readq(afsr_reg); 358 afar = upa_readq(afar_reg); 359 360 /* Clear primary/secondary error status bits. */ 361 error_bits = afsr & 362 (SYSIO_CEAFSR_PPIO | SYSIO_CEAFSR_PDRD | SYSIO_CEAFSR_PDWR | 363 SYSIO_CEAFSR_SPIO | SYSIO_CEAFSR_SDRD | SYSIO_CEAFSR_SDWR); 364 upa_writeq(error_bits, afsr_reg); 365 366 portid = of_getintprop_default(op->dev.of_node, "portid", -1); 367 368 printk("SYSIO[%x]: Correctable ECC Error, primary error type[%s]\n", 369 portid, 370 (((error_bits & SYSIO_CEAFSR_PPIO) ? 371 "PIO" : 372 ((error_bits & SYSIO_CEAFSR_PDRD) ? 373 "DVMA Read" : 374 ((error_bits & SYSIO_CEAFSR_PDWR) ? 375 "DVMA Write" : "???"))))); 376 377 /* XXX Use syndrome and afar to print out module string just like 378 * XXX UDB CE trap handler does... -DaveM 379 */ 380 printk("SYSIO[%x]: DOFF[%lx] ECC Syndrome[%lx] Size[%lx] MID[%lx]\n", 381 portid, 382 (afsr & SYSIO_CEAFSR_DOFF) >> 45UL, 383 (afsr & SYSIO_CEAFSR_ESYND) >> 48UL, 384 (afsr & SYSIO_CEAFSR_SIZE) >> 42UL, 385 (afsr & SYSIO_CEAFSR_MID) >> 37UL); 386 printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); 387 388 printk("SYSIO[%x]: Secondary CE errors [", portid); 389 reported = 0; 390 if (afsr & SYSIO_CEAFSR_SPIO) { 391 reported++; 392 printk("(PIO)"); 393 } 394 if (afsr & SYSIO_CEAFSR_SDRD) { 395 reported++; 396 printk("(DVMA Read)"); 397 } 398 if (afsr & SYSIO_CEAFSR_SDWR) { 399 reported++; 400 printk("(DVMA Write)"); 401 } 402 if (!reported) 403 printk("(none)"); 404 printk("]\n"); 405 406 return IRQ_HANDLED; 407 } 408 409 #define SYSIO_SBUS_AFSR 0x2010UL 410 #define SYSIO_SBUS_AFAR 0x2018UL 411 #define SYSIO_SBAFSR_PLE 0x8000000000000000UL /* Primary Late PIO Error */ 412 #define SYSIO_SBAFSR_PTO 0x4000000000000000UL /* Primary SBUS Timeout */ 413 #define SYSIO_SBAFSR_PBERR 0x2000000000000000UL /* Primary SBUS Error ACK */ 414 #define SYSIO_SBAFSR_SLE 0x1000000000000000UL /* Secondary Late PIO Error */ 415 #define SYSIO_SBAFSR_STO 0x0800000000000000UL /* Secondary SBUS Timeout */ 416 #define SYSIO_SBAFSR_SBERR 0x0400000000000000UL /* Secondary SBUS Error ACK */ 417 #define SYSIO_SBAFSR_RESV1 0x03ff000000000000UL /* Reserved */ 418 #define SYSIO_SBAFSR_RD 0x0000800000000000UL /* Primary was late PIO read */ 419 #define SYSIO_SBAFSR_RESV2 0x0000600000000000UL /* Reserved */ 420 #define SYSIO_SBAFSR_SIZE 0x00001c0000000000UL /* Size of transfer */ 421 #define SYSIO_SBAFSR_MID 0x000003e000000000UL /* MID causing the error */ 422 #define SYSIO_SBAFSR_RESV3 0x0000001fffffffffUL /* Reserved */ 423 static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id) 424 { 425 struct platform_device *op = dev_id; 426 struct iommu *iommu = op->dev.archdata.iommu; 427 unsigned long afsr_reg, afar_reg, reg_base; 428 unsigned long afsr, afar, error_bits; 429 int reported, portid; 430 431 reg_base = iommu->write_complete_reg - 0x2000UL; 432 afsr_reg = reg_base + SYSIO_SBUS_AFSR; 433 afar_reg = reg_base + SYSIO_SBUS_AFAR; 434 435 afsr = upa_readq(afsr_reg); 436 afar = upa_readq(afar_reg); 437 438 /* Clear primary/secondary error status bits. */ 439 error_bits = afsr & 440 (SYSIO_SBAFSR_PLE | SYSIO_SBAFSR_PTO | SYSIO_SBAFSR_PBERR | 441 SYSIO_SBAFSR_SLE | SYSIO_SBAFSR_STO | SYSIO_SBAFSR_SBERR); 442 upa_writeq(error_bits, afsr_reg); 443 444 portid = of_getintprop_default(op->dev.of_node, "portid", -1); 445 446 /* Log the error. */ 447 printk("SYSIO[%x]: SBUS Error, primary error type[%s] read(%d)\n", 448 portid, 449 (((error_bits & SYSIO_SBAFSR_PLE) ? 450 "Late PIO Error" : 451 ((error_bits & SYSIO_SBAFSR_PTO) ? 452 "Time Out" : 453 ((error_bits & SYSIO_SBAFSR_PBERR) ? 454 "Error Ack" : "???")))), 455 (afsr & SYSIO_SBAFSR_RD) ? 1 : 0); 456 printk("SYSIO[%x]: size[%lx] MID[%lx]\n", 457 portid, 458 (afsr & SYSIO_SBAFSR_SIZE) >> 42UL, 459 (afsr & SYSIO_SBAFSR_MID) >> 37UL); 460 printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar); 461 printk("SYSIO[%x]: Secondary SBUS errors [", portid); 462 reported = 0; 463 if (afsr & SYSIO_SBAFSR_SLE) { 464 reported++; 465 printk("(Late PIO Error)"); 466 } 467 if (afsr & SYSIO_SBAFSR_STO) { 468 reported++; 469 printk("(Time Out)"); 470 } 471 if (afsr & SYSIO_SBAFSR_SBERR) { 472 reported++; 473 printk("(Error Ack)"); 474 } 475 if (!reported) 476 printk("(none)"); 477 printk("]\n"); 478 479 /* XXX check iommu/strbuf for further error status XXX */ 480 481 return IRQ_HANDLED; 482 } 483 484 #define ECC_CONTROL 0x0020UL 485 #define SYSIO_ECNTRL_ECCEN 0x8000000000000000UL /* Enable ECC Checking */ 486 #define SYSIO_ECNTRL_UEEN 0x4000000000000000UL /* Enable UE Interrupts */ 487 #define SYSIO_ECNTRL_CEEN 0x2000000000000000UL /* Enable CE Interrupts */ 488 489 #define SYSIO_UE_INO 0x34 490 #define SYSIO_CE_INO 0x35 491 #define SYSIO_SBUSERR_INO 0x36 492 493 static void __init sysio_register_error_handlers(struct platform_device *op) 494 { 495 struct iommu *iommu = op->dev.archdata.iommu; 496 unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; 497 unsigned int irq; 498 u64 control; 499 int portid; 500 501 portid = of_getintprop_default(op->dev.of_node, "portid", -1); 502 503 irq = sbus_build_irq(op, SYSIO_UE_INO); 504 if (request_irq(irq, sysio_ue_handler, 0, 505 "SYSIO_UE", op) < 0) { 506 prom_printf("SYSIO[%x]: Cannot register UE interrupt.\n", 507 portid); 508 prom_halt(); 509 } 510 511 irq = sbus_build_irq(op, SYSIO_CE_INO); 512 if (request_irq(irq, sysio_ce_handler, 0, 513 "SYSIO_CE", op) < 0) { 514 prom_printf("SYSIO[%x]: Cannot register CE interrupt.\n", 515 portid); 516 prom_halt(); 517 } 518 519 irq = sbus_build_irq(op, SYSIO_SBUSERR_INO); 520 if (request_irq(irq, sysio_sbus_error_handler, 0, 521 "SYSIO_SBERR", op) < 0) { 522 prom_printf("SYSIO[%x]: Cannot register SBUS Error interrupt.\n", 523 portid); 524 prom_halt(); 525 } 526 527 /* Now turn the error interrupts on and also enable ECC checking. */ 528 upa_writeq((SYSIO_ECNTRL_ECCEN | 529 SYSIO_ECNTRL_UEEN | 530 SYSIO_ECNTRL_CEEN), 531 reg_base + ECC_CONTROL); 532 533 control = upa_readq(iommu->write_complete_reg); 534 control |= 0x100UL; /* SBUS Error Interrupt Enable */ 535 upa_writeq(control, iommu->write_complete_reg); 536 } 537 538 /* Boot time initialization. */ 539 static void __init sbus_iommu_init(struct platform_device *op) 540 { 541 const struct linux_prom64_registers *pr; 542 struct device_node *dp = op->dev.of_node; 543 struct iommu *iommu; 544 struct strbuf *strbuf; 545 unsigned long regs, reg_base; 546 int i, portid; 547 u64 control; 548 549 pr = of_get_property(dp, "reg", NULL); 550 if (!pr) { 551 prom_printf("sbus_iommu_init: Cannot map SYSIO " 552 "control registers.\n"); 553 prom_halt(); 554 } 555 regs = pr->phys_addr; 556 557 iommu = kzalloc(sizeof(*iommu), GFP_ATOMIC); 558 strbuf = kzalloc(sizeof(*strbuf), GFP_ATOMIC); 559 if (!iommu || !strbuf) 560 goto fatal_memory_error; 561 562 op->dev.archdata.iommu = iommu; 563 op->dev.archdata.stc = strbuf; 564 op->dev.archdata.numa_node = -1; 565 566 reg_base = regs + SYSIO_IOMMUREG_BASE; 567 iommu->iommu_control = reg_base + IOMMU_CONTROL; 568 iommu->iommu_tsbbase = reg_base + IOMMU_TSBBASE; 569 iommu->iommu_flush = reg_base + IOMMU_FLUSH; 570 iommu->iommu_tags = iommu->iommu_control + 571 (IOMMU_TAGDIAG - IOMMU_CONTROL); 572 573 reg_base = regs + SYSIO_STRBUFREG_BASE; 574 strbuf->strbuf_control = reg_base + STRBUF_CONTROL; 575 strbuf->strbuf_pflush = reg_base + STRBUF_PFLUSH; 576 strbuf->strbuf_fsync = reg_base + STRBUF_FSYNC; 577 578 strbuf->strbuf_enabled = 1; 579 580 strbuf->strbuf_flushflag = (volatile unsigned long *) 581 ((((unsigned long)&strbuf->__flushflag_buf[0]) 582 + 63UL) 583 & ~63UL); 584 strbuf->strbuf_flushflag_pa = (unsigned long) 585 __pa(strbuf->strbuf_flushflag); 586 587 /* The SYSIO SBUS control register is used for dummy reads 588 * in order to ensure write completion. 589 */ 590 iommu->write_complete_reg = regs + 0x2000UL; 591 592 portid = of_getintprop_default(op->dev.of_node, "portid", -1); 593 printk(KERN_INFO "SYSIO: UPA portID %x, at %016lx\n", 594 portid, regs); 595 596 /* Setup for TSB_SIZE=7, TBW_SIZE=0, MMU_DE=1, MMU_EN=1 */ 597 if (iommu_table_init(iommu, IO_TSB_SIZE, MAP_BASE, 0xffffffff, -1)) 598 goto fatal_memory_error; 599 600 control = upa_readq(iommu->iommu_control); 601 control = ((7UL << 16UL) | 602 (0UL << 2UL) | 603 (1UL << 1UL) | 604 (1UL << 0UL)); 605 upa_writeq(control, iommu->iommu_control); 606 607 /* Clean out any cruft in the IOMMU using 608 * diagnostic accesses. 609 */ 610 for (i = 0; i < 16; i++) { 611 unsigned long dram, tag; 612 613 dram = iommu->iommu_control + (IOMMU_DRAMDIAG - IOMMU_CONTROL); 614 tag = iommu->iommu_control + (IOMMU_TAGDIAG - IOMMU_CONTROL); 615 616 dram += (unsigned long)i * 8UL; 617 tag += (unsigned long)i * 8UL; 618 upa_writeq(0, dram); 619 upa_writeq(0, tag); 620 } 621 upa_readq(iommu->write_complete_reg); 622 623 /* Give the TSB to SYSIO. */ 624 upa_writeq(__pa(iommu->page_table), iommu->iommu_tsbbase); 625 626 /* Setup streaming buffer, DE=1 SB_EN=1 */ 627 control = (1UL << 1UL) | (1UL << 0UL); 628 upa_writeq(control, strbuf->strbuf_control); 629 630 /* Clear out the tags using diagnostics. */ 631 for (i = 0; i < 16; i++) { 632 unsigned long ptag, ltag; 633 634 ptag = strbuf->strbuf_control + 635 (STRBUF_PTAGDIAG - STRBUF_CONTROL); 636 ltag = strbuf->strbuf_control + 637 (STRBUF_LTAGDIAG - STRBUF_CONTROL); 638 ptag += (unsigned long)i * 8UL; 639 ltag += (unsigned long)i * 8UL; 640 641 upa_writeq(0UL, ptag); 642 upa_writeq(0UL, ltag); 643 } 644 645 /* Enable DVMA arbitration for all devices/slots. */ 646 control = upa_readq(iommu->write_complete_reg); 647 control |= 0x3fUL; 648 upa_writeq(control, iommu->write_complete_reg); 649 650 /* Now some Xfire specific grot... */ 651 if (this_is_starfire) 652 starfire_hookup(portid); 653 654 sysio_register_error_handlers(op); 655 return; 656 657 fatal_memory_error: 658 kfree(iommu); 659 kfree(strbuf); 660 prom_printf("sbus_iommu_init: Fatal memory allocation error.\n"); 661 } 662 663 static int __init sbus_init(void) 664 { 665 struct device_node *dp; 666 667 for_each_node_by_name(dp, "sbus") { 668 struct platform_device *op = of_find_device_by_node(dp); 669 670 sbus_iommu_init(op); 671 of_propagate_archdata(op); 672 } 673 674 return 0; 675 } 676 677 subsys_initcall(sbus_init); 678