1 /* 2 * pcic.c: MicroSPARC-IIep PCI controller support 3 * 4 * Copyright (C) 1998 V. Roganov and G. Raiko 5 * 6 * Code is derived from Ultra/PCI PSYCHO controller support, see that 7 * for author info. 8 * 9 * Support for diverse IIep based platforms by Pete Zaitcev. 10 * CP-1200 by Eric Brower. 11 */ 12 13 #include <linux/config.h> 14 #include <linux/kernel.h> 15 #include <linux/types.h> 16 #include <linux/init.h> 17 #include <linux/mm.h> 18 #include <linux/slab.h> 19 #include <linux/jiffies.h> 20 21 #include <asm/ebus.h> 22 #include <asm/sbus.h> /* for sanity check... */ 23 #include <asm/swift.h> /* for cache flushing. */ 24 #include <asm/io.h> 25 26 #include <linux/ctype.h> 27 #include <linux/pci.h> 28 #include <linux/time.h> 29 #include <linux/timex.h> 30 #include <linux/interrupt.h> 31 32 #include <asm/irq.h> 33 #include <asm/oplib.h> 34 #include <asm/pcic.h> 35 #include <asm/timer.h> 36 #include <asm/uaccess.h> 37 38 39 unsigned int pcic_pin_to_irq(unsigned int pin, char *name); 40 41 /* 42 * I studied different documents and many live PROMs both from 2.30 43 * family and 3.xx versions. I came to the amazing conclusion: there is 44 * absolutely no way to route interrupts in IIep systems relying on 45 * information which PROM presents. We must hardcode interrupt routing 46 * schematics. And this actually sucks. -- zaitcev 1999/05/12 47 * 48 * To find irq for a device we determine which routing map 49 * is in effect or, in other words, on which machine we are running. 50 * We use PROM name for this although other techniques may be used 51 * in special cases (Gleb reports a PROMless IIep based system). 52 * Once we know the map we take device configuration address and 53 * find PCIC pin number where INT line goes. Then we may either program 54 * preferred irq into the PCIC or supply the preexisting irq to the device. 55 */ 56 struct pcic_ca2irq { 57 unsigned char busno; /* PCI bus number */ 58 unsigned char devfn; /* Configuration address */ 59 unsigned char pin; /* PCIC external interrupt pin */ 60 unsigned char irq; /* Preferred IRQ (mappable in PCIC) */ 61 unsigned int force; /* Enforce preferred IRQ */ 62 }; 63 64 struct pcic_sn2list { 65 char *sysname; 66 struct pcic_ca2irq *intmap; 67 int mapdim; 68 }; 69 70 /* 71 * JavaEngine-1 apparently has different versions. 72 * 73 * According to communications with Sun folks, for P2 build 501-4628-03: 74 * pin 0 - parallel, audio; 75 * pin 1 - Ethernet; 76 * pin 2 - su; 77 * pin 3 - PS/2 kbd and mouse. 78 * 79 * OEM manual (805-1486): 80 * pin 0: Ethernet 81 * pin 1: All EBus 82 * pin 2: IGA (unused) 83 * pin 3: Not connected 84 * OEM manual says that 501-4628 & 501-4811 are the same thing, 85 * only the latter has NAND flash in place. 86 * 87 * So far unofficial Sun wins over the OEM manual. Poor OEMs... 88 */ 89 static struct pcic_ca2irq pcic_i_je1a[] = { /* 501-4811-03 */ 90 { 0, 0x00, 2, 12, 0 }, /* EBus: hogs all */ 91 { 0, 0x01, 1, 6, 1 }, /* Happy Meal */ 92 { 0, 0x80, 0, 7, 0 }, /* IGA (unused) */ 93 }; 94 95 /* XXX JS-E entry is incomplete - PCI Slot 2 address (pin 7)? */ 96 static struct pcic_ca2irq pcic_i_jse[] = { 97 { 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */ 98 { 0, 0x01, 1, 6, 0 }, /* hme */ 99 { 0, 0x08, 2, 9, 0 }, /* VGA - we hope not used :) */ 100 { 0, 0x10, 6, 8, 0 }, /* PCI INTA# in Slot 1 */ 101 { 0, 0x18, 7, 12, 0 }, /* PCI INTA# in Slot 2, shared w. RTC */ 102 { 0, 0x38, 4, 9, 0 }, /* All ISA devices. Read 8259. */ 103 { 0, 0x80, 5, 11, 0 }, /* EIDE */ 104 /* {0,0x88, 0,0,0} - unknown device... PMU? Probably no interrupt. */ 105 { 0, 0xA0, 4, 9, 0 }, /* USB */ 106 /* 107 * Some pins belong to non-PCI devices, we hardcode them in drivers. 108 * sun4m timers - irq 10, 14 109 * PC style RTC - pin 7, irq 4 ? 110 * Smart card, Parallel - pin 4 shared with USB, ISA 111 * audio - pin 3, irq 5 ? 112 */ 113 }; 114 115 /* SPARCengine-6 was the original release name of CP1200. 116 * The documentation differs between the two versions 117 */ 118 static struct pcic_ca2irq pcic_i_se6[] = { 119 { 0, 0x08, 0, 2, 0 }, /* SCSI */ 120 { 0, 0x01, 1, 6, 0 }, /* HME */ 121 { 0, 0x00, 3, 13, 0 }, /* EBus */ 122 }; 123 124 /* 125 * Krups (courtesy of Varol Kaptan) 126 * No documentation available, but it was easy to guess 127 * because it was very similar to Espresso. 128 * 129 * pin 0 - kbd, mouse, serial; 130 * pin 1 - Ethernet; 131 * pin 2 - igs (we do not use it); 132 * pin 3 - audio; 133 * pin 4,5,6 - unused; 134 * pin 7 - RTC (from P2 onwards as David B. says). 135 */ 136 static struct pcic_ca2irq pcic_i_jk[] = { 137 { 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */ 138 { 0, 0x01, 1, 6, 0 }, /* hme */ 139 }; 140 141 /* 142 * Several entries in this list may point to the same routing map 143 * as several PROMs may be installed on the same physical board. 144 */ 145 #define SN2L_INIT(name, map) \ 146 { name, map, sizeof(map)/sizeof(struct pcic_ca2irq) } 147 148 static struct pcic_sn2list pcic_known_sysnames[] = { 149 SN2L_INIT("SUNW,JavaEngine1", pcic_i_je1a), /* JE1, PROM 2.32 */ 150 SN2L_INIT("SUNW,JS-E", pcic_i_jse), /* PROLL JavaStation-E */ 151 SN2L_INIT("SUNW,SPARCengine-6", pcic_i_se6), /* SPARCengine-6/CP-1200 */ 152 SN2L_INIT("SUNW,JS-NC", pcic_i_jk), /* PROLL JavaStation-NC */ 153 SN2L_INIT("SUNW,JSIIep", pcic_i_jk), /* OBP JavaStation-NC */ 154 { NULL, NULL, 0 } 155 }; 156 157 /* 158 * Only one PCIC per IIep, 159 * and since we have no SMP IIep, only one per system. 160 */ 161 static int pcic0_up; 162 static struct linux_pcic pcic0; 163 164 void * __iomem pcic_regs; 165 volatile int pcic_speculative; 166 volatile int pcic_trapped; 167 168 static void pci_do_gettimeofday(struct timeval *tv); 169 static int pci_do_settimeofday(struct timespec *tv); 170 171 #define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3)) 172 173 static int pcic_read_config_dword(unsigned int busno, unsigned int devfn, 174 int where, u32 *value) 175 { 176 struct linux_pcic *pcic; 177 unsigned long flags; 178 179 pcic = &pcic0; 180 181 local_irq_save(flags); 182 #if 0 /* does not fail here */ 183 pcic_speculative = 1; 184 pcic_trapped = 0; 185 #endif 186 writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr); 187 #if 0 /* does not fail here */ 188 nop(); 189 if (pcic_trapped) { 190 local_irq_restore(flags); 191 *value = ~0; 192 return 0; 193 } 194 #endif 195 pcic_speculative = 2; 196 pcic_trapped = 0; 197 *value = readl(pcic->pcic_config_space_data + (where&4)); 198 nop(); 199 if (pcic_trapped) { 200 pcic_speculative = 0; 201 local_irq_restore(flags); 202 *value = ~0; 203 return 0; 204 } 205 pcic_speculative = 0; 206 local_irq_restore(flags); 207 return 0; 208 } 209 210 static int pcic_read_config(struct pci_bus *bus, unsigned int devfn, 211 int where, int size, u32 *val) 212 { 213 unsigned int v; 214 215 if (bus->number != 0) return -EINVAL; 216 switch (size) { 217 case 1: 218 pcic_read_config_dword(bus->number, devfn, where&~3, &v); 219 *val = 0xff & (v >> (8*(where & 3))); 220 return 0; 221 case 2: 222 if (where&1) return -EINVAL; 223 pcic_read_config_dword(bus->number, devfn, where&~3, &v); 224 *val = 0xffff & (v >> (8*(where & 3))); 225 return 0; 226 case 4: 227 if (where&3) return -EINVAL; 228 pcic_read_config_dword(bus->number, devfn, where&~3, val); 229 return 0; 230 } 231 return -EINVAL; 232 } 233 234 static int pcic_write_config_dword(unsigned int busno, unsigned int devfn, 235 int where, u32 value) 236 { 237 struct linux_pcic *pcic; 238 unsigned long flags; 239 240 pcic = &pcic0; 241 242 local_irq_save(flags); 243 writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr); 244 writel(value, pcic->pcic_config_space_data + (where&4)); 245 local_irq_restore(flags); 246 return 0; 247 } 248 249 static int pcic_write_config(struct pci_bus *bus, unsigned int devfn, 250 int where, int size, u32 val) 251 { 252 unsigned int v; 253 254 if (bus->number != 0) return -EINVAL; 255 switch (size) { 256 case 1: 257 pcic_read_config_dword(bus->number, devfn, where&~3, &v); 258 v = (v & ~(0xff << (8*(where&3)))) | 259 ((0xff&val) << (8*(where&3))); 260 return pcic_write_config_dword(bus->number, devfn, where&~3, v); 261 case 2: 262 if (where&1) return -EINVAL; 263 pcic_read_config_dword(bus->number, devfn, where&~3, &v); 264 v = (v & ~(0xffff << (8*(where&3)))) | 265 ((0xffff&val) << (8*(where&3))); 266 return pcic_write_config_dword(bus->number, devfn, where&~3, v); 267 case 4: 268 if (where&3) return -EINVAL; 269 return pcic_write_config_dword(bus->number, devfn, where, val); 270 } 271 return -EINVAL; 272 } 273 274 static struct pci_ops pcic_ops = { 275 .read = pcic_read_config, 276 .write = pcic_write_config, 277 }; 278 279 /* 280 * On sparc64 pcibios_init() calls pci_controller_probe(). 281 * We want PCIC probed little ahead so that interrupt controller 282 * would be operational. 283 */ 284 int __init pcic_probe(void) 285 { 286 struct linux_pcic *pcic; 287 struct linux_prom_registers regs[PROMREG_MAX]; 288 struct linux_pbm_info* pbm; 289 char namebuf[64]; 290 int node; 291 int err; 292 293 if (pcic0_up) { 294 prom_printf("PCIC: called twice!\n"); 295 prom_halt(); 296 } 297 pcic = &pcic0; 298 299 node = prom_getchild (prom_root_node); 300 node = prom_searchsiblings (node, "pci"); 301 if (node == 0) 302 return -ENODEV; 303 /* 304 * Map in PCIC register set, config space, and IO base 305 */ 306 err = prom_getproperty(node, "reg", (char*)regs, sizeof(regs)); 307 if (err == 0 || err == -1) { 308 prom_printf("PCIC: Error, cannot get PCIC registers " 309 "from PROM.\n"); 310 prom_halt(); 311 } 312 313 pcic0_up = 1; 314 315 pcic->pcic_res_regs.name = "pcic_registers"; 316 pcic->pcic_regs = ioremap(regs[0].phys_addr, regs[0].reg_size); 317 if (!pcic->pcic_regs) { 318 prom_printf("PCIC: Error, cannot map PCIC registers.\n"); 319 prom_halt(); 320 } 321 322 pcic->pcic_res_io.name = "pcic_io"; 323 if ((pcic->pcic_io = (unsigned long) 324 ioremap(regs[1].phys_addr, 0x10000)) == 0) { 325 prom_printf("PCIC: Error, cannot map PCIC IO Base.\n"); 326 prom_halt(); 327 } 328 329 pcic->pcic_res_cfg_addr.name = "pcic_cfg_addr"; 330 if ((pcic->pcic_config_space_addr = 331 ioremap(regs[2].phys_addr, regs[2].reg_size * 2)) == 0) { 332 prom_printf("PCIC: Error, cannot map" 333 "PCI Configuration Space Address.\n"); 334 prom_halt(); 335 } 336 337 /* 338 * Docs say three least significant bits in address and data 339 * must be the same. Thus, we need adjust size of data. 340 */ 341 pcic->pcic_res_cfg_data.name = "pcic_cfg_data"; 342 if ((pcic->pcic_config_space_data = 343 ioremap(regs[3].phys_addr, regs[3].reg_size * 2)) == 0) { 344 prom_printf("PCIC: Error, cannot map" 345 "PCI Configuration Space Data.\n"); 346 prom_halt(); 347 } 348 349 pbm = &pcic->pbm; 350 pbm->prom_node = node; 351 prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0; 352 strcpy(pbm->prom_name, namebuf); 353 354 { 355 extern volatile int t_nmi[1]; 356 extern int pcic_nmi_trap_patch[1]; 357 358 t_nmi[0] = pcic_nmi_trap_patch[0]; 359 t_nmi[1] = pcic_nmi_trap_patch[1]; 360 t_nmi[2] = pcic_nmi_trap_patch[2]; 361 t_nmi[3] = pcic_nmi_trap_patch[3]; 362 swift_flush_dcache(); 363 pcic_regs = pcic->pcic_regs; 364 } 365 366 prom_getstring(prom_root_node, "name", namebuf, 63); namebuf[63] = 0; 367 { 368 struct pcic_sn2list *p; 369 370 for (p = pcic_known_sysnames; p->sysname != NULL; p++) { 371 if (strcmp(namebuf, p->sysname) == 0) 372 break; 373 } 374 pcic->pcic_imap = p->intmap; 375 pcic->pcic_imdim = p->mapdim; 376 } 377 if (pcic->pcic_imap == NULL) { 378 /* 379 * We do not panic here for the sake of embedded systems. 380 */ 381 printk("PCIC: System %s is unknown, cannot route interrupts\n", 382 namebuf); 383 } 384 385 return 0; 386 } 387 388 static void __init pcic_pbm_scan_bus(struct linux_pcic *pcic) 389 { 390 struct linux_pbm_info *pbm = &pcic->pbm; 391 392 pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, &pcic_ops, pbm); 393 #if 0 /* deadwood transplanted from sparc64 */ 394 pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, pbm->prom_node); 395 pci_record_assignments(pbm, pbm->pci_bus); 396 pci_assign_unassigned(pbm, pbm->pci_bus); 397 pci_fixup_irq(pbm, pbm->pci_bus); 398 #endif 399 } 400 401 /* 402 * Main entry point from the PCI subsystem. 403 */ 404 static int __init pcic_init(void) 405 { 406 struct linux_pcic *pcic; 407 408 /* 409 * PCIC should be initialized at start of the timer. 410 * So, here we report the presence of PCIC and do some magic passes. 411 */ 412 if(!pcic0_up) 413 return 0; 414 pcic = &pcic0; 415 416 /* 417 * Switch off IOTLB translation. 418 */ 419 writeb(PCI_DVMA_CONTROL_IOTLB_DISABLE, 420 pcic->pcic_regs+PCI_DVMA_CONTROL); 421 422 /* 423 * Increase mapped size for PCI memory space (DMA access). 424 * Should be done in that order (size first, address second). 425 * Why we couldn't set up 4GB and forget about it? XXX 426 */ 427 writel(0xF0000000UL, pcic->pcic_regs+PCI_SIZE_0); 428 writel(0+PCI_BASE_ADDRESS_SPACE_MEMORY, 429 pcic->pcic_regs+PCI_BASE_ADDRESS_0); 430 431 pcic_pbm_scan_bus(pcic); 432 433 ebus_init(); 434 return 0; 435 } 436 437 int pcic_present(void) 438 { 439 return pcic0_up; 440 } 441 442 static int __init pdev_to_pnode(struct linux_pbm_info *pbm, 443 struct pci_dev *pdev) 444 { 445 struct linux_prom_pci_registers regs[PROMREG_MAX]; 446 int err; 447 int node = prom_getchild(pbm->prom_node); 448 449 while(node) { 450 err = prom_getproperty(node, "reg", 451 (char *)®s[0], sizeof(regs)); 452 if(err != 0 && err != -1) { 453 unsigned long devfn = (regs[0].which_io >> 8) & 0xff; 454 if(devfn == pdev->devfn) 455 return node; 456 } 457 node = prom_getsibling(node); 458 } 459 return 0; 460 } 461 462 static inline struct pcidev_cookie *pci_devcookie_alloc(void) 463 { 464 return kmalloc(sizeof(struct pcidev_cookie), GFP_ATOMIC); 465 } 466 467 static void pcic_map_pci_device(struct linux_pcic *pcic, 468 struct pci_dev *dev, int node) 469 { 470 char namebuf[64]; 471 unsigned long address; 472 unsigned long flags; 473 int j; 474 475 if (node == 0 || node == -1) { 476 strcpy(namebuf, "???"); 477 } else { 478 prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0; 479 } 480 481 for (j = 0; j < 6; j++) { 482 address = dev->resource[j].start; 483 if (address == 0) break; /* are sequential */ 484 flags = dev->resource[j].flags; 485 if ((flags & IORESOURCE_IO) != 0) { 486 if (address < 0x10000) { 487 /* 488 * A device responds to I/O cycles on PCI. 489 * We generate these cycles with memory 490 * access into the fixed map (phys 0x30000000). 491 * 492 * Since a device driver does not want to 493 * do ioremap() before accessing PC-style I/O, 494 * we supply virtual, ready to access address. 495 * 496 * Ebus devices do not come here even if 497 * CheerIO makes a similar conversion. 498 * See ebus.c for details. 499 * 500 * Note that check_region()/request_region() 501 * work for these devices. 502 * 503 * XXX Neat trick, but it's a *bad* idea 504 * to shit into regions like that. 505 * What if we want to allocate one more 506 * PCI base address... 507 */ 508 dev->resource[j].start = 509 pcic->pcic_io + address; 510 dev->resource[j].end = 1; /* XXX */ 511 dev->resource[j].flags = 512 (flags & ~IORESOURCE_IO) | IORESOURCE_MEM; 513 } else { 514 /* 515 * OOPS... PCI Spec allows this. Sun does 516 * not have any devices getting above 64K 517 * so it must be user with a weird I/O 518 * board in a PCI slot. We must remap it 519 * under 64K but it is not done yet. XXX 520 */ 521 printk("PCIC: Skipping I/O space at 0x%lx," 522 "this will Oops if a driver attaches;" 523 "device '%s' at %02x:%02x)\n", address, 524 namebuf, dev->bus->number, dev->devfn); 525 } 526 } 527 } 528 } 529 530 static void 531 pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node) 532 { 533 struct pcic_ca2irq *p; 534 int i, ivec; 535 char namebuf[64]; 536 537 if (node == 0 || node == -1) { 538 strcpy(namebuf, "???"); 539 } else { 540 prom_getstring(node, "name", namebuf, sizeof(namebuf)); 541 } 542 543 if ((p = pcic->pcic_imap) == 0) { 544 dev->irq = 0; 545 return; 546 } 547 for (i = 0; i < pcic->pcic_imdim; i++) { 548 if (p->busno == dev->bus->number && p->devfn == dev->devfn) 549 break; 550 p++; 551 } 552 if (i >= pcic->pcic_imdim) { 553 printk("PCIC: device %s devfn %02x:%02x not found in %d\n", 554 namebuf, dev->bus->number, dev->devfn, pcic->pcic_imdim); 555 dev->irq = 0; 556 return; 557 } 558 559 i = p->pin; 560 if (i >= 0 && i < 4) { 561 ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO); 562 dev->irq = ivec >> (i << 2) & 0xF; 563 } else if (i >= 4 && i < 8) { 564 ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI); 565 dev->irq = ivec >> ((i-4) << 2) & 0xF; 566 } else { /* Corrupted map */ 567 printk("PCIC: BAD PIN %d\n", i); for (;;) {} 568 } 569 /* P3 */ /* printk("PCIC: device %s pin %d ivec 0x%x irq %x\n", namebuf, i, ivec, dev->irq); */ 570 571 /* 572 * dev->irq=0 means PROM did not bother to program the upper 573 * half of PCIC. This happens on JS-E with PROM 3.11, for instance. 574 */ 575 if (dev->irq == 0 || p->force) { 576 if (p->irq == 0 || p->irq >= 15) { /* Corrupted map */ 577 printk("PCIC: BAD IRQ %d\n", p->irq); for (;;) {} 578 } 579 printk("PCIC: setting irq %d at pin %d for device %02x:%02x\n", 580 p->irq, p->pin, dev->bus->number, dev->devfn); 581 dev->irq = p->irq; 582 583 i = p->pin; 584 if (i >= 4) { 585 ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI); 586 ivec &= ~(0xF << ((i - 4) << 2)); 587 ivec |= p->irq << ((i - 4) << 2); 588 writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_HI); 589 } else { 590 ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO); 591 ivec &= ~(0xF << (i << 2)); 592 ivec |= p->irq << (i << 2); 593 writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_LO); 594 } 595 } 596 597 return; 598 } 599 600 /* 601 * Normally called from {do_}pci_scan_bus... 602 */ 603 void __init pcibios_fixup_bus(struct pci_bus *bus) 604 { 605 struct pci_dev *dev; 606 int i, has_io, has_mem; 607 unsigned int cmd; 608 struct linux_pcic *pcic; 609 /* struct linux_pbm_info* pbm = &pcic->pbm; */ 610 int node; 611 struct pcidev_cookie *pcp; 612 613 if (!pcic0_up) { 614 printk("pcibios_fixup_bus: no PCIC\n"); 615 return; 616 } 617 pcic = &pcic0; 618 619 /* 620 * Next crud is an equivalent of pbm = pcic_bus_to_pbm(bus); 621 */ 622 if (bus->number != 0) { 623 printk("pcibios_fixup_bus: nonzero bus 0x%x\n", bus->number); 624 return; 625 } 626 627 list_for_each_entry(dev, &bus->devices, bus_list) { 628 629 /* 630 * Comment from i386 branch: 631 * There are buggy BIOSes that forget to enable I/O and memory 632 * access to PCI devices. We try to fix this, but we need to 633 * be sure that the BIOS didn't forget to assign an address 634 * to the device. [mj] 635 * OBP is a case of such BIOS :-) 636 */ 637 has_io = has_mem = 0; 638 for(i=0; i<6; i++) { 639 unsigned long f = dev->resource[i].flags; 640 if (f & IORESOURCE_IO) { 641 has_io = 1; 642 } else if (f & IORESOURCE_MEM) 643 has_mem = 1; 644 } 645 pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd); 646 if (has_io && !(cmd & PCI_COMMAND_IO)) { 647 printk("PCIC: Enabling I/O for device %02x:%02x\n", 648 dev->bus->number, dev->devfn); 649 cmd |= PCI_COMMAND_IO; 650 pcic_write_config(dev->bus, dev->devfn, 651 PCI_COMMAND, 2, cmd); 652 } 653 if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) { 654 printk("PCIC: Enabling memory for device %02x:%02x\n", 655 dev->bus->number, dev->devfn); 656 cmd |= PCI_COMMAND_MEMORY; 657 pcic_write_config(dev->bus, dev->devfn, 658 PCI_COMMAND, 2, cmd); 659 } 660 661 node = pdev_to_pnode(&pcic->pbm, dev); 662 if(node == 0) 663 node = -1; 664 665 /* cookies */ 666 pcp = pci_devcookie_alloc(); 667 pcp->pbm = &pcic->pbm; 668 pcp->prom_node = node; 669 dev->sysdata = pcp; 670 671 /* fixing I/O to look like memory */ 672 if ((dev->class>>16) != PCI_BASE_CLASS_BRIDGE) 673 pcic_map_pci_device(pcic, dev, node); 674 675 pcic_fill_irq(pcic, dev, node); 676 } 677 } 678 679 /* 680 * pcic_pin_to_irq() is exported to ebus.c. 681 */ 682 unsigned int 683 pcic_pin_to_irq(unsigned int pin, char *name) 684 { 685 struct linux_pcic *pcic = &pcic0; 686 unsigned int irq; 687 unsigned int ivec; 688 689 if (pin < 4) { 690 ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO); 691 irq = ivec >> (pin << 2) & 0xF; 692 } else if (pin < 8) { 693 ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI); 694 irq = ivec >> ((pin-4) << 2) & 0xF; 695 } else { /* Corrupted map */ 696 printk("PCIC: BAD PIN %d FOR %s\n", pin, name); 697 for (;;) {} /* XXX Cannot panic properly in case of PROLL */ 698 } 699 /* P3 */ /* printk("PCIC: dev %s pin %d ivec 0x%x irq %x\n", name, pin, ivec, irq); */ 700 return irq; 701 } 702 703 /* Makes compiler happy */ 704 static volatile int pcic_timer_dummy; 705 706 static void pcic_clear_clock_irq(void) 707 { 708 pcic_timer_dummy = readl(pcic0.pcic_regs+PCI_SYS_LIMIT); 709 } 710 711 static irqreturn_t pcic_timer_handler (int irq, void *h, struct pt_regs *regs) 712 { 713 write_seqlock(&xtime_lock); /* Dummy, to show that we remember */ 714 pcic_clear_clock_irq(); 715 do_timer(regs); 716 #ifndef CONFIG_SMP 717 update_process_times(user_mode(regs)); 718 #endif 719 write_sequnlock(&xtime_lock); 720 return IRQ_HANDLED; 721 } 722 723 #define USECS_PER_JIFFY 10000 /* We have 100HZ "standard" timer for sparc */ 724 #define TICK_TIMER_LIMIT ((100*1000000/4)/100) 725 726 void __init pci_time_init(void) 727 { 728 struct linux_pcic *pcic = &pcic0; 729 unsigned long v; 730 int timer_irq, irq; 731 732 /* A hack until do_gettimeofday prototype is moved to arch specific headers 733 and btfixupped. Patch do_gettimeofday with ba pci_do_gettimeofday; nop */ 734 ((unsigned int *)do_gettimeofday)[0] = 735 0x10800000 | ((((unsigned long)pci_do_gettimeofday - 736 (unsigned long)do_gettimeofday) >> 2) & 0x003fffff); 737 ((unsigned int *)do_gettimeofday)[1] = 0x01000000; 738 BTFIXUPSET_CALL(bus_do_settimeofday, pci_do_settimeofday, BTFIXUPCALL_NORM); 739 btfixup(); 740 741 writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT); 742 /* PROM should set appropriate irq */ 743 v = readb(pcic->pcic_regs+PCI_COUNTER_IRQ); 744 timer_irq = PCI_COUNTER_IRQ_SYS(v); 745 writel (PCI_COUNTER_IRQ_SET(timer_irq, 0), 746 pcic->pcic_regs+PCI_COUNTER_IRQ); 747 irq = request_irq(timer_irq, pcic_timer_handler, 748 (SA_INTERRUPT | SA_STATIC_ALLOC), "timer", NULL); 749 if (irq) { 750 prom_printf("time_init: unable to attach IRQ%d\n", timer_irq); 751 prom_halt(); 752 } 753 local_irq_enable(); 754 } 755 756 static __inline__ unsigned long do_gettimeoffset(void) 757 { 758 /* 759 * We devide all to 100 760 * to have microsecond resolution and to avoid overflow 761 */ 762 unsigned long count = 763 readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW; 764 count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100); 765 return count; 766 } 767 768 extern unsigned long wall_jiffies; 769 770 static void pci_do_gettimeofday(struct timeval *tv) 771 { 772 unsigned long flags; 773 unsigned long seq; 774 unsigned long usec, sec; 775 unsigned long max_ntp_tick = tick_usec - tickadj; 776 777 do { 778 unsigned long lost; 779 780 seq = read_seqbegin_irqsave(&xtime_lock, flags); 781 usec = do_gettimeoffset(); 782 lost = jiffies - wall_jiffies; 783 784 /* 785 * If time_adjust is negative then NTP is slowing the clock 786 * so make sure not to go into next possible interval. 787 * Better to lose some accuracy than have time go backwards.. 788 */ 789 if (unlikely(time_adjust < 0)) { 790 usec = min(usec, max_ntp_tick); 791 792 if (lost) 793 usec += lost * max_ntp_tick; 794 } 795 else if (unlikely(lost)) 796 usec += lost * tick_usec; 797 798 sec = xtime.tv_sec; 799 usec += (xtime.tv_nsec / 1000); 800 } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); 801 802 while (usec >= 1000000) { 803 usec -= 1000000; 804 sec++; 805 } 806 807 tv->tv_sec = sec; 808 tv->tv_usec = usec; 809 } 810 811 static int pci_do_settimeofday(struct timespec *tv) 812 { 813 if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) 814 return -EINVAL; 815 816 /* 817 * This is revolting. We need to set "xtime" correctly. However, the 818 * value in this location is the value at the most recent update of 819 * wall time. Discover what correction gettimeofday() would have 820 * made, and then undo it! 821 */ 822 tv->tv_nsec -= 1000 * (do_gettimeoffset() + 823 (jiffies - wall_jiffies) * (USEC_PER_SEC / HZ)); 824 while (tv->tv_nsec < 0) { 825 tv->tv_nsec += NSEC_PER_SEC; 826 tv->tv_sec--; 827 } 828 829 wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec; 830 wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_nsec; 831 832 if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) { 833 wall_to_monotonic.tv_nsec -= NSEC_PER_SEC; 834 wall_to_monotonic.tv_sec++; 835 } 836 if (wall_to_monotonic.tv_nsec < 0) { 837 wall_to_monotonic.tv_nsec += NSEC_PER_SEC; 838 wall_to_monotonic.tv_sec--; 839 } 840 841 xtime.tv_sec = tv->tv_sec; 842 xtime.tv_nsec = tv->tv_nsec; 843 time_adjust = 0; /* stop active adjtime() */ 844 time_status |= STA_UNSYNC; 845 time_maxerror = NTP_PHASE_LIMIT; 846 time_esterror = NTP_PHASE_LIMIT; 847 return 0; 848 } 849 850 #if 0 851 static void watchdog_reset() { 852 writeb(0, pcic->pcic_regs+PCI_SYS_STATUS); 853 } 854 #endif 855 856 /* 857 * Other archs parse arguments here. 858 */ 859 char * __init pcibios_setup(char *str) 860 { 861 return str; 862 } 863 864 void pcibios_align_resource(void *data, struct resource *res, 865 unsigned long size, unsigned long align) 866 { 867 } 868 869 int pcibios_enable_device(struct pci_dev *pdev, int mask) 870 { 871 return 0; 872 } 873 874 /* 875 * NMI 876 */ 877 void pcic_nmi(unsigned int pend, struct pt_regs *regs) 878 { 879 880 pend = flip_dword(pend); 881 882 if (!pcic_speculative || (pend & PCI_SYS_INT_PENDING_PIO) == 0) { 883 /* 884 * XXX On CP-1200 PCI #SERR may happen, we do not know 885 * what to do about it yet. 886 */ 887 printk("Aiee, NMI pend 0x%x pc 0x%x spec %d, hanging\n", 888 pend, (int)regs->pc, pcic_speculative); 889 for (;;) { } 890 } 891 pcic_speculative = 0; 892 pcic_trapped = 1; 893 regs->pc = regs->npc; 894 regs->npc += 4; 895 } 896 897 static inline unsigned long get_irqmask(int irq_nr) 898 { 899 return 1 << irq_nr; 900 } 901 902 static inline char *pcic_irq_itoa(unsigned int irq) 903 { 904 static char buff[16]; 905 sprintf(buff, "%d", irq); 906 return buff; 907 } 908 909 static void pcic_disable_irq(unsigned int irq_nr) 910 { 911 unsigned long mask, flags; 912 913 mask = get_irqmask(irq_nr); 914 local_irq_save(flags); 915 writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET); 916 local_irq_restore(flags); 917 } 918 919 static void pcic_enable_irq(unsigned int irq_nr) 920 { 921 unsigned long mask, flags; 922 923 mask = get_irqmask(irq_nr); 924 local_irq_save(flags); 925 writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR); 926 local_irq_restore(flags); 927 } 928 929 static void pcic_clear_profile_irq(int cpu) 930 { 931 printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__); 932 } 933 934 static void pcic_load_profile_irq(int cpu, unsigned int limit) 935 { 936 printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__); 937 } 938 939 /* We assume the caller has disabled local interrupts when these are called, 940 * or else very bizarre behavior will result. 941 */ 942 static void pcic_disable_pil_irq(unsigned int pil) 943 { 944 writel(get_irqmask(pil), pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET); 945 } 946 947 static void pcic_enable_pil_irq(unsigned int pil) 948 { 949 writel(get_irqmask(pil), pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR); 950 } 951 952 void __init sun4m_pci_init_IRQ(void) 953 { 954 BTFIXUPSET_CALL(enable_irq, pcic_enable_irq, BTFIXUPCALL_NORM); 955 BTFIXUPSET_CALL(disable_irq, pcic_disable_irq, BTFIXUPCALL_NORM); 956 BTFIXUPSET_CALL(enable_pil_irq, pcic_enable_pil_irq, BTFIXUPCALL_NORM); 957 BTFIXUPSET_CALL(disable_pil_irq, pcic_disable_pil_irq, BTFIXUPCALL_NORM); 958 BTFIXUPSET_CALL(clear_clock_irq, pcic_clear_clock_irq, BTFIXUPCALL_NORM); 959 BTFIXUPSET_CALL(clear_profile_irq, pcic_clear_profile_irq, BTFIXUPCALL_NORM); 960 BTFIXUPSET_CALL(load_profile_irq, pcic_load_profile_irq, BTFIXUPCALL_NORM); 961 BTFIXUPSET_CALL(__irq_itoa, pcic_irq_itoa, BTFIXUPCALL_NORM); 962 } 963 964 int pcibios_assign_resource(struct pci_dev *pdev, int resource) 965 { 966 return -ENXIO; 967 } 968 969 /* 970 * This probably belongs here rather than ioport.c because 971 * we do not want this crud linked into SBus kernels. 972 * Also, think for a moment about likes of floppy.c that 973 * include architecture specific parts. They may want to redefine ins/outs. 974 * 975 * We do not use horroble macroses here because we want to 976 * advance pointer by sizeof(size). 977 */ 978 void outsb(unsigned long addr, const void *src, unsigned long count) 979 { 980 while (count) { 981 count -= 1; 982 outb(*(const char *)src, addr); 983 src += 1; 984 /* addr += 1; */ 985 } 986 } 987 988 void outsw(unsigned long addr, const void *src, unsigned long count) 989 { 990 while (count) { 991 count -= 2; 992 outw(*(const short *)src, addr); 993 src += 2; 994 /* addr += 2; */ 995 } 996 } 997 998 void outsl(unsigned long addr, const void *src, unsigned long count) 999 { 1000 while (count) { 1001 count -= 4; 1002 outl(*(const long *)src, addr); 1003 src += 4; 1004 /* addr += 4; */ 1005 } 1006 } 1007 1008 void insb(unsigned long addr, void *dst, unsigned long count) 1009 { 1010 while (count) { 1011 count -= 1; 1012 *(unsigned char *)dst = inb(addr); 1013 dst += 1; 1014 /* addr += 1; */ 1015 } 1016 } 1017 1018 void insw(unsigned long addr, void *dst, unsigned long count) 1019 { 1020 while (count) { 1021 count -= 2; 1022 *(unsigned short *)dst = inw(addr); 1023 dst += 2; 1024 /* addr += 2; */ 1025 } 1026 } 1027 1028 void insl(unsigned long addr, void *dst, unsigned long count) 1029 { 1030 while (count) { 1031 count -= 4; 1032 /* 1033 * XXX I am sure we are in for an unaligned trap here. 1034 */ 1035 *(unsigned long *)dst = inl(addr); 1036 dst += 4; 1037 /* addr += 4; */ 1038 } 1039 } 1040 1041 subsys_initcall(pcic_init); 1042