xref: /openbmc/linux/arch/sparc/kernel/entry.S (revision 93df8a1e) 
1/* arch/sparc/kernel/entry.S:  Sparc trap low-level entry points.
2 *
3 * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
4 * Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
5 * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
6 * Copyright (C) 1996-1999 Jakub Jelinek   (jj@sunsite.mff.cuni.cz)
7 * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
8 */
9
10#include <linux/linkage.h>
11#include <linux/errno.h>
12
13#include <asm/head.h>
14#include <asm/asi.h>
15#include <asm/smp.h>
16#include <asm/contregs.h>
17#include <asm/ptrace.h>
18#include <asm/asm-offsets.h>
19#include <asm/psr.h>
20#include <asm/vaddrs.h>
21#include <asm/page.h>
22#include <asm/pgtable.h>
23#include <asm/winmacro.h>
24#include <asm/signal.h>
25#include <asm/obio.h>
26#include <asm/mxcc.h>
27#include <asm/thread_info.h>
28#include <asm/param.h>
29#include <asm/unistd.h>
30
31#include <asm/asmmacro.h>
32
33#define curptr      g6
34
35/* These are just handy. */
36#define _SV	save	%sp, -STACKFRAME_SZ, %sp
37#define _RS     restore
38
39#define FLUSH_ALL_KERNEL_WINDOWS \
40	_SV; _SV; _SV; _SV; _SV; _SV; _SV; \
41	_RS; _RS; _RS; _RS; _RS; _RS; _RS;
42
43	.text
44
45#ifdef CONFIG_KGDB
46	.align	4
47	.globl		arch_kgdb_breakpoint
48	.type		arch_kgdb_breakpoint,#function
49arch_kgdb_breakpoint:
50	ta		0x7d
51	retl
52	 nop
53	.size		arch_kgdb_breakpoint,.-arch_kgdb_breakpoint
54#endif
55
56#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
57	.align	4
58	.globl	floppy_hardint
59floppy_hardint:
60	/*
61	 * This code cannot touch registers %l0 %l1 and %l2
62	 * because SAVE_ALL depends on their values. It depends
63	 * on %l3 also, but we regenerate it before a call.
64	 * Other registers are:
65	 * %l3 -- base address of fdc registers
66	 * %l4 -- pdma_vaddr
67	 * %l5 -- scratch for ld/st address
68	 * %l6 -- pdma_size
69	 * %l7 -- scratch [floppy byte, ld/st address, aux. data]
70	 */
71
72	/* Do we have work to do? */
73	sethi	%hi(doing_pdma), %l7
74	ld	[%l7 + %lo(doing_pdma)], %l7
75	cmp	%l7, 0
76	be	floppy_dosoftint
77	 nop
78
79	/* Load fdc register base */
80	sethi	%hi(fdc_status), %l3
81	ld	[%l3 + %lo(fdc_status)], %l3
82
83	/* Setup register addresses */
84	sethi	%hi(pdma_vaddr), %l5	! transfer buffer
85	ld	[%l5 + %lo(pdma_vaddr)], %l4
86	sethi	%hi(pdma_size), %l5	! bytes to go
87	ld	[%l5 + %lo(pdma_size)], %l6
88next_byte:
89  	ldub	[%l3], %l7
90
91	andcc	%l7, 0x80, %g0		! Does fifo still have data
92	bz	floppy_fifo_emptied	! fifo has been emptied...
93	 andcc	%l7, 0x20, %g0		! in non-dma mode still?
94	bz	floppy_overrun		! nope, overrun
95	 andcc	%l7, 0x40, %g0		! 0=write 1=read
96	bz	floppy_write
97	 sub	%l6, 0x1, %l6
98
99	/* Ok, actually read this byte */
100	ldub	[%l3 + 1], %l7
101	orcc	%g0, %l6, %g0
102	stb	%l7, [%l4]
103	bne	next_byte
104	 add	%l4, 0x1, %l4
105
106	b	floppy_tdone
107	 nop
108
109floppy_write:
110	/* Ok, actually write this byte */
111	ldub	[%l4], %l7
112	orcc	%g0, %l6, %g0
113	stb	%l7, [%l3 + 1]
114	bne	next_byte
115	 add	%l4, 0x1, %l4
116
117	/* fall through... */
118floppy_tdone:
119	sethi	%hi(pdma_vaddr), %l5
120	st	%l4, [%l5 + %lo(pdma_vaddr)]
121	sethi	%hi(pdma_size), %l5
122	st	%l6, [%l5 + %lo(pdma_size)]
123	/* Flip terminal count pin */
124	set	auxio_register, %l7
125	ld	[%l7], %l7
126
127	ldub	[%l7], %l5
128
129	or	%l5, 0xc2, %l5
130	stb	%l5, [%l7]
131	andn    %l5, 0x02, %l5
132
1332:
134	/* Kill some time so the bits set */
135	WRITE_PAUSE
136	WRITE_PAUSE
137
138	stb     %l5, [%l7]
139
140	/* Prevent recursion */
141	sethi	%hi(doing_pdma), %l7
142	b	floppy_dosoftint
143	 st	%g0, [%l7 + %lo(doing_pdma)]
144
145	/* We emptied the FIFO, but we haven't read everything
146	 * as of yet.  Store the current transfer address and
147	 * bytes left to read so we can continue when the next
148	 * fast IRQ comes in.
149	 */
150floppy_fifo_emptied:
151	sethi	%hi(pdma_vaddr), %l5
152	st	%l4, [%l5 + %lo(pdma_vaddr)]
153	sethi	%hi(pdma_size), %l7
154	st	%l6, [%l7 + %lo(pdma_size)]
155
156	/* Restore condition codes */
157	wr	%l0, 0x0, %psr
158	WRITE_PAUSE
159
160	jmp	%l1
161	rett	%l2
162
163floppy_overrun:
164	sethi	%hi(pdma_vaddr), %l5
165	st	%l4, [%l5 + %lo(pdma_vaddr)]
166	sethi	%hi(pdma_size), %l5
167	st	%l6, [%l5 + %lo(pdma_size)]
168	/* Prevent recursion */
169	sethi	%hi(doing_pdma), %l7
170	st	%g0, [%l7 + %lo(doing_pdma)]
171
172	/* fall through... */
173floppy_dosoftint:
174	rd	%wim, %l3
175	SAVE_ALL
176
177	/* Set all IRQs off. */
178	or	%l0, PSR_PIL, %l4
179	wr	%l4, 0x0, %psr
180	WRITE_PAUSE
181	wr	%l4, PSR_ET, %psr
182	WRITE_PAUSE
183
184	mov	11, %o0			! floppy irq level (unused anyway)
185	mov	%g0, %o1		! devid is not used in fast interrupts
186	call	sparc_floppy_irq
187	 add	%sp, STACKFRAME_SZ, %o2	! struct pt_regs *regs
188
189	RESTORE_ALL
190
191#endif /* (CONFIG_BLK_DEV_FD) */
192
193	/* Bad trap handler */
194	.globl	bad_trap_handler
195bad_trap_handler:
196	SAVE_ALL
197
198	wr	%l0, PSR_ET, %psr
199	WRITE_PAUSE
200
201	add	%sp, STACKFRAME_SZ, %o0	! pt_regs
202	call	do_hw_interrupt
203	 mov	%l7, %o1		! trap number
204
205	RESTORE_ALL
206
207/* For now all IRQ's not registered get sent here. handler_irq() will
208 * see if a routine is registered to handle this interrupt and if not
209 * it will say so on the console.
210 */
211
212	.align	4
213	.globl	real_irq_entry, patch_handler_irq
214real_irq_entry:
215	SAVE_ALL
216
217#ifdef CONFIG_SMP
218	.globl	patchme_maybe_smp_msg
219
220	cmp	%l7, 11
221patchme_maybe_smp_msg:
222	bgu	maybe_smp4m_msg
223	 nop
224#endif
225
226real_irq_continue:
227	or	%l0, PSR_PIL, %g2
228	wr	%g2, 0x0, %psr
229	WRITE_PAUSE
230	wr	%g2, PSR_ET, %psr
231	WRITE_PAUSE
232	mov	%l7, %o0		! irq level
233patch_handler_irq:
234	call	handler_irq
235	 add	%sp, STACKFRAME_SZ, %o1	! pt_regs ptr
236	or	%l0, PSR_PIL, %g2	! restore PIL after handler_irq
237	wr	%g2, PSR_ET, %psr	! keep ET up
238	WRITE_PAUSE
239
240	RESTORE_ALL
241
242#ifdef CONFIG_SMP
243	/* SMP per-cpu ticker interrupts are handled specially. */
244smp4m_ticker:
245	bne	real_irq_continue+4
246	 or	%l0, PSR_PIL, %g2
247	wr	%g2, 0x0, %psr
248	WRITE_PAUSE
249	wr	%g2, PSR_ET, %psr
250	WRITE_PAUSE
251	call	smp4m_percpu_timer_interrupt
252	 add	%sp, STACKFRAME_SZ, %o0
253	wr	%l0, PSR_ET, %psr
254	WRITE_PAUSE
255	RESTORE_ALL
256
257#define GET_PROCESSOR4M_ID(reg)	\
258	rd	%tbr, %reg;	\
259	srl	%reg, 12, %reg;	\
260	and	%reg, 3, %reg;
261
262	/* Here is where we check for possible SMP IPI passed to us
263	 * on some level other than 15 which is the NMI and only used
264	 * for cross calls.  That has a separate entry point below.
265	 *
266	 * IPIs are sent on Level 12, 13 and 14. See IRQ_IPI_*.
267	 */
268maybe_smp4m_msg:
269	GET_PROCESSOR4M_ID(o3)
270	sethi	%hi(sun4m_irq_percpu), %l5
271	sll	%o3, 2, %o3
272	or	%l5, %lo(sun4m_irq_percpu), %o5
273	sethi	%hi(0x70000000), %o2	! Check all soft-IRQs
274	ld	[%o5 + %o3], %o1
275	ld	[%o1 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
276	andcc	%o3, %o2, %g0
277	be,a	smp4m_ticker
278	 cmp	%l7, 14
279	/* Soft-IRQ IPI */
280	st	%o2, [%o1 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x70000000
281	WRITE_PAUSE
282	ld	[%o1 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
283	WRITE_PAUSE
284	or	%l0, PSR_PIL, %l4
285	wr	%l4, 0x0, %psr
286	WRITE_PAUSE
287	wr	%l4, PSR_ET, %psr
288	WRITE_PAUSE
289	srl	%o3, 28, %o2		! shift for simpler checks below
290maybe_smp4m_msg_check_single:
291	andcc	%o2, 0x1, %g0
292	beq,a	maybe_smp4m_msg_check_mask
293	 andcc	%o2, 0x2, %g0
294	call	smp_call_function_single_interrupt
295	 nop
296	andcc	%o2, 0x2, %g0
297maybe_smp4m_msg_check_mask:
298	beq,a	maybe_smp4m_msg_check_resched
299	 andcc	%o2, 0x4, %g0
300	call	smp_call_function_interrupt
301	 nop
302	andcc	%o2, 0x4, %g0
303maybe_smp4m_msg_check_resched:
304	/* rescheduling is done in RESTORE_ALL regardless, but incr stats */
305	beq,a	maybe_smp4m_msg_out
306	 nop
307	call	smp_resched_interrupt
308	 nop
309maybe_smp4m_msg_out:
310	RESTORE_ALL
311
312	.align	4
313	.globl	linux_trap_ipi15_sun4m
314linux_trap_ipi15_sun4m:
315	SAVE_ALL
316	sethi	%hi(0x80000000), %o2
317	GET_PROCESSOR4M_ID(o0)
318	sethi	%hi(sun4m_irq_percpu), %l5
319	or	%l5, %lo(sun4m_irq_percpu), %o5
320	sll	%o0, 2, %o0
321	ld	[%o5 + %o0], %o5
322	ld	[%o5 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
323	andcc	%o3, %o2, %g0
324	be	sun4m_nmi_error		! Must be an NMI async memory error
325	 st	%o2, [%o5 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x80000000
326	WRITE_PAUSE
327	ld	[%o5 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
328	WRITE_PAUSE
329	or	%l0, PSR_PIL, %l4
330	wr	%l4, 0x0, %psr
331	WRITE_PAUSE
332	wr	%l4, PSR_ET, %psr
333	WRITE_PAUSE
334	call	smp4m_cross_call_irq
335	 nop
336	b	ret_trap_lockless_ipi
337	 clr	%l6
338
339	.globl	smp4d_ticker
340	/* SMP per-cpu ticker interrupts are handled specially. */
341smp4d_ticker:
342	SAVE_ALL
343	or	%l0, PSR_PIL, %g2
344	sethi	%hi(CC_ICLR), %o0
345	sethi	%hi(1 << 14), %o1
346	or	%o0, %lo(CC_ICLR), %o0
347	stha	%o1, [%o0] ASI_M_MXCC	/* Clear PIL 14 in MXCC's ICLR */
348	wr	%g2, 0x0, %psr
349	WRITE_PAUSE
350	wr	%g2, PSR_ET, %psr
351	WRITE_PAUSE
352	call	smp4d_percpu_timer_interrupt
353	 add	%sp, STACKFRAME_SZ, %o0
354	wr	%l0, PSR_ET, %psr
355	WRITE_PAUSE
356	RESTORE_ALL
357
358	.align	4
359	.globl	linux_trap_ipi15_sun4d
360linux_trap_ipi15_sun4d:
361	SAVE_ALL
362	sethi	%hi(CC_BASE), %o4
363	sethi	%hi(MXCC_ERR_ME|MXCC_ERR_PEW|MXCC_ERR_ASE|MXCC_ERR_PEE), %o2
364	or	%o4, (CC_EREG - CC_BASE), %o0
365	ldda	[%o0] ASI_M_MXCC, %o0
366	andcc	%o0, %o2, %g0
367	bne	1f
368	 sethi	%hi(BB_STAT2), %o2
369	lduba	[%o2] ASI_M_CTL, %o2
370	andcc	%o2, BB_STAT2_MASK, %g0
371	bne	2f
372	 or	%o4, (CC_ICLR - CC_BASE), %o0
373	sethi	%hi(1 << 15), %o1
374	stha	%o1, [%o0] ASI_M_MXCC	/* Clear PIL 15 in MXCC's ICLR */
375	or	%l0, PSR_PIL, %l4
376	wr	%l4, 0x0, %psr
377	WRITE_PAUSE
378	wr	%l4, PSR_ET, %psr
379	WRITE_PAUSE
380	call	smp4d_cross_call_irq
381	 nop
382	b	ret_trap_lockless_ipi
383	 clr	%l6
384
3851:	/* MXCC error */
3862:	/* BB error */
387	/* Disable PIL 15 */
388	set	CC_IMSK, %l4
389	lduha	[%l4] ASI_M_MXCC, %l5
390	sethi	%hi(1 << 15), %l7
391	or	%l5, %l7, %l5
392	stha	%l5, [%l4] ASI_M_MXCC
393	/* FIXME */
3941:	b,a	1b
395
396	.globl	smpleon_ipi
397	.extern leon_ipi_interrupt
398	/* SMP per-cpu IPI interrupts are handled specially. */
399smpleon_ipi:
400        SAVE_ALL
401	or	%l0, PSR_PIL, %g2
402	wr	%g2, 0x0, %psr
403	WRITE_PAUSE
404	wr	%g2, PSR_ET, %psr
405	WRITE_PAUSE
406	call	leonsmp_ipi_interrupt
407	 add	%sp, STACKFRAME_SZ, %o1 ! pt_regs
408	wr	%l0, PSR_ET, %psr
409	WRITE_PAUSE
410	RESTORE_ALL
411
412	.align	4
413	.globl	linux_trap_ipi15_leon
414linux_trap_ipi15_leon:
415	SAVE_ALL
416	or	%l0, PSR_PIL, %l4
417	wr	%l4, 0x0, %psr
418	WRITE_PAUSE
419	wr	%l4, PSR_ET, %psr
420	WRITE_PAUSE
421	call	leon_cross_call_irq
422	 nop
423	b	ret_trap_lockless_ipi
424	 clr	%l6
425
426#endif /* CONFIG_SMP */
427
428	/* This routine handles illegal instructions and privileged
429	 * instruction attempts from user code.
430	 */
431	.align	4
432	.globl	bad_instruction
433bad_instruction:
434	sethi	%hi(0xc1f80000), %l4
435	ld	[%l1], %l5
436	sethi	%hi(0x81d80000), %l7
437	and	%l5, %l4, %l5
438	cmp	%l5, %l7
439	be	1f
440	SAVE_ALL
441
442	wr	%l0, PSR_ET, %psr		! re-enable traps
443	WRITE_PAUSE
444
445	add	%sp, STACKFRAME_SZ, %o0
446	mov	%l1, %o1
447	mov	%l2, %o2
448	call	do_illegal_instruction
449	 mov	%l0, %o3
450
451	RESTORE_ALL
452
4531:	/* unimplemented flush - just skip */
454	jmpl	%l2, %g0
455	 rett	%l2 + 4
456
457	.align	4
458	.globl	priv_instruction
459priv_instruction:
460	SAVE_ALL
461
462	wr	%l0, PSR_ET, %psr
463	WRITE_PAUSE
464
465	add	%sp, STACKFRAME_SZ, %o0
466	mov	%l1, %o1
467	mov	%l2, %o2
468	call	do_priv_instruction
469	 mov	%l0, %o3
470
471	RESTORE_ALL
472
473	/* This routine handles unaligned data accesses. */
474	.align	4
475	.globl	mna_handler
476mna_handler:
477	andcc	%l0, PSR_PS, %g0
478	be	mna_fromuser
479	 nop
480
481	SAVE_ALL
482
483	wr	%l0, PSR_ET, %psr
484	WRITE_PAUSE
485
486	ld	[%l1], %o1
487	call	kernel_unaligned_trap
488	 add	%sp, STACKFRAME_SZ, %o0
489
490	RESTORE_ALL
491
492mna_fromuser:
493	SAVE_ALL
494
495	wr	%l0, PSR_ET, %psr		! re-enable traps
496	WRITE_PAUSE
497
498	ld	[%l1], %o1
499	call	user_unaligned_trap
500	 add	%sp, STACKFRAME_SZ, %o0
501
502	RESTORE_ALL
503
504	/* This routine handles floating point disabled traps. */
505	.align	4
506	.globl	fpd_trap_handler
507fpd_trap_handler:
508	SAVE_ALL
509
510	wr	%l0, PSR_ET, %psr		! re-enable traps
511	WRITE_PAUSE
512
513	add	%sp, STACKFRAME_SZ, %o0
514	mov	%l1, %o1
515	mov	%l2, %o2
516	call	do_fpd_trap
517	 mov	%l0, %o3
518
519	RESTORE_ALL
520
521	/* This routine handles Floating Point Exceptions. */
522	.align	4
523	.globl	fpe_trap_handler
524fpe_trap_handler:
525	set	fpsave_magic, %l5
526	cmp	%l1, %l5
527	be	1f
528	 sethi	%hi(fpsave), %l5
529	or	%l5, %lo(fpsave), %l5
530	cmp	%l1, %l5
531	bne	2f
532	 sethi	%hi(fpsave_catch2), %l5
533	or	%l5, %lo(fpsave_catch2), %l5
534	wr	%l0, 0x0, %psr
535	WRITE_PAUSE
536	jmp	%l5
537	 rett	%l5 + 4
5381:
539	sethi	%hi(fpsave_catch), %l5
540	or	%l5, %lo(fpsave_catch), %l5
541	wr	%l0, 0x0, %psr
542	WRITE_PAUSE
543	jmp	%l5
544	 rett	%l5 + 4
545
5462:
547	SAVE_ALL
548
549	wr	%l0, PSR_ET, %psr		! re-enable traps
550	WRITE_PAUSE
551
552	add	%sp, STACKFRAME_SZ, %o0
553	mov	%l1, %o1
554	mov	%l2, %o2
555	call	do_fpe_trap
556	 mov	%l0, %o3
557
558	RESTORE_ALL
559
560	/* This routine handles Tag Overflow Exceptions. */
561	.align	4
562	.globl	do_tag_overflow
563do_tag_overflow:
564	SAVE_ALL
565
566	wr	%l0, PSR_ET, %psr		! re-enable traps
567	WRITE_PAUSE
568
569	add	%sp, STACKFRAME_SZ, %o0
570	mov	%l1, %o1
571	mov	%l2, %o2
572	call	handle_tag_overflow
573	 mov	%l0, %o3
574
575	RESTORE_ALL
576
577	/* This routine handles Watchpoint Exceptions. */
578	.align	4
579	.globl	do_watchpoint
580do_watchpoint:
581	SAVE_ALL
582
583	wr	%l0, PSR_ET, %psr		! re-enable traps
584	WRITE_PAUSE
585
586	add	%sp, STACKFRAME_SZ, %o0
587	mov	%l1, %o1
588	mov	%l2, %o2
589	call	handle_watchpoint
590	 mov	%l0, %o3
591
592	RESTORE_ALL
593
594	/* This routine handles Register Access Exceptions. */
595	.align	4
596	.globl	do_reg_access
597do_reg_access:
598	SAVE_ALL
599
600	wr	%l0, PSR_ET, %psr		! re-enable traps
601	WRITE_PAUSE
602
603	add	%sp, STACKFRAME_SZ, %o0
604	mov	%l1, %o1
605	mov	%l2, %o2
606	call	handle_reg_access
607	 mov	%l0, %o3
608
609	RESTORE_ALL
610
611	/* This routine handles Co-Processor Disabled Exceptions. */
612	.align	4
613	.globl	do_cp_disabled
614do_cp_disabled:
615	SAVE_ALL
616
617	wr	%l0, PSR_ET, %psr		! re-enable traps
618	WRITE_PAUSE
619
620	add	%sp, STACKFRAME_SZ, %o0
621	mov	%l1, %o1
622	mov	%l2, %o2
623	call	handle_cp_disabled
624	 mov	%l0, %o3
625
626	RESTORE_ALL
627
628	/* This routine handles Co-Processor Exceptions. */
629	.align	4
630	.globl	do_cp_exception
631do_cp_exception:
632	SAVE_ALL
633
634	wr	%l0, PSR_ET, %psr		! re-enable traps
635	WRITE_PAUSE
636
637	add	%sp, STACKFRAME_SZ, %o0
638	mov	%l1, %o1
639	mov	%l2, %o2
640	call	handle_cp_exception
641	 mov	%l0, %o3
642
643	RESTORE_ALL
644
645	/* This routine handles Hardware Divide By Zero Exceptions. */
646	.align	4
647	.globl	do_hw_divzero
648do_hw_divzero:
649	SAVE_ALL
650
651	wr	%l0, PSR_ET, %psr		! re-enable traps
652	WRITE_PAUSE
653
654	add	%sp, STACKFRAME_SZ, %o0
655	mov	%l1, %o1
656	mov	%l2, %o2
657	call	handle_hw_divzero
658	 mov	%l0, %o3
659
660	RESTORE_ALL
661
662	.align	4
663	.globl	do_flush_windows
664do_flush_windows:
665	SAVE_ALL
666
667	wr	%l0, PSR_ET, %psr
668	WRITE_PAUSE
669
670	andcc	%l0, PSR_PS, %g0
671	bne	dfw_kernel
672	 nop
673
674	call	flush_user_windows
675	 nop
676
677	/* Advance over the trap instruction. */
678	ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1
679	add	%l1, 0x4, %l2
680	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
681	st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
682
683	RESTORE_ALL
684
685	.globl	flush_patch_one
686
687	/* We get these for debugging routines using __builtin_return_address() */
688dfw_kernel:
689flush_patch_one:
690	FLUSH_ALL_KERNEL_WINDOWS
691
692	/* Advance over the trap instruction. */
693	ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1
694	add	%l1, 0x4, %l2
695	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
696	st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
697
698	RESTORE_ALL
699
700	/* The getcc software trap.  The user wants the condition codes from
701	 * the %psr in register %g1.
702	 */
703
704	.align	4
705	.globl	getcc_trap_handler
706getcc_trap_handler:
707	srl	%l0, 20, %g1	! give user
708	and	%g1, 0xf, %g1	! only ICC bits in %psr
709	jmp	%l2		! advance over trap instruction
710	rett	%l2 + 0x4	! like this...
711
712	/* The setcc software trap.  The user has condition codes in %g1
713	 * that it would like placed in the %psr.  Be careful not to flip
714	 * any unintentional bits!
715	 */
716
717	.align	4
718	.globl	setcc_trap_handler
719setcc_trap_handler:
720	sll	%g1, 0x14, %l4
721	set	PSR_ICC, %l5
722	andn	%l0, %l5, %l0	! clear ICC bits in %psr
723	and	%l4, %l5, %l4	! clear non-ICC bits in user value
724	or	%l4, %l0, %l4	! or them in... mix mix mix
725
726	wr	%l4, 0x0, %psr	! set new %psr
727	WRITE_PAUSE		! TI scumbags...
728
729	jmp	%l2		! advance over trap instruction
730	rett	%l2 + 0x4	! like this...
731
732sun4m_nmi_error:
733	/* NMI async memory error handling. */
734	sethi	%hi(0x80000000), %l4
735	sethi	%hi(sun4m_irq_global), %o5
736	ld	[%o5 + %lo(sun4m_irq_global)], %l5
737	st	%l4, [%l5 + 0x0c]	! sun4m_irq_global->mask_set=0x80000000
738	WRITE_PAUSE
739	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
740	WRITE_PAUSE
741	or	%l0, PSR_PIL, %l4
742	wr	%l4, 0x0, %psr
743	WRITE_PAUSE
744	wr	%l4, PSR_ET, %psr
745	WRITE_PAUSE
746	call	sun4m_nmi
747	 nop
748	st	%l4, [%l5 + 0x08]	! sun4m_irq_global->mask_clear=0x80000000
749	WRITE_PAUSE
750	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
751	WRITE_PAUSE
752	RESTORE_ALL
753
754#ifndef CONFIG_SMP
755	.align	4
756	.globl	linux_trap_ipi15_sun4m
757linux_trap_ipi15_sun4m:
758	SAVE_ALL
759
760	ba	sun4m_nmi_error
761	 nop
762#endif /* CONFIG_SMP */
763
764	.align	4
765	.globl	srmmu_fault
766srmmu_fault:
767	mov	0x400, %l5
768	mov	0x300, %l4
769
770LEON_PI(lda	[%l5] ASI_LEON_MMUREGS, %l6)	! read sfar first
771SUN_PI_(lda	[%l5] ASI_M_MMUREGS, %l6)	! read sfar first
772
773LEON_PI(lda	[%l4] ASI_LEON_MMUREGS, %l5)	! read sfsr last
774SUN_PI_(lda	[%l4] ASI_M_MMUREGS, %l5)	! read sfsr last
775
776	andn	%l6, 0xfff, %l6
777	srl	%l5, 6, %l5			! and encode all info into l7
778
779	and	%l5, 2, %l5
780	or	%l5, %l6, %l6
781
782	or	%l6, %l7, %l7			! l7 = [addr,write,txtfault]
783
784	SAVE_ALL
785
786	mov	%l7, %o1
787	mov	%l7, %o2
788	and	%o1, 1, %o1		! arg2 = text_faultp
789	mov	%l7, %o3
790	and	%o2, 2, %o2		! arg3 = writep
791	andn	%o3, 0xfff, %o3		! arg4 = faulting address
792
793	wr	%l0, PSR_ET, %psr
794	WRITE_PAUSE
795
796	call	do_sparc_fault
797	 add	%sp, STACKFRAME_SZ, %o0	! arg1 = pt_regs ptr
798
799	RESTORE_ALL
800
801	.align	4
802	.globl	sys_nis_syscall
803sys_nis_syscall:
804	mov	%o7, %l5
805	add	%sp, STACKFRAME_SZ, %o0		! pt_regs *regs arg
806	call	c_sys_nis_syscall
807	 mov	%l5, %o7
808
809sunos_execv:
810	.globl	sunos_execv
811	b	sys_execve
812	 clr	%i2
813
814	.align	4
815	.globl	sys_sparc_pipe
816sys_sparc_pipe:
817	mov	%o7, %l5
818	add	%sp, STACKFRAME_SZ, %o0		! pt_regs *regs arg
819	call	sparc_pipe
820	 mov	%l5, %o7
821
822	.align	4
823	.globl	sys_sigstack
824sys_sigstack:
825	mov	%o7, %l5
826	mov	%fp, %o2
827	call	do_sys_sigstack
828	 mov	%l5, %o7
829
830	.align	4
831	.globl	sys_sigreturn
832sys_sigreturn:
833	call	do_sigreturn
834	 add	%sp, STACKFRAME_SZ, %o0
835
836	ld	[%curptr + TI_FLAGS], %l5
837	andcc	%l5, _TIF_SYSCALL_TRACE, %g0
838	be	1f
839	 nop
840
841	call	syscall_trace
842	 mov	1, %o1
843
8441:
845	/* We don't want to muck with user registers like a
846	 * normal syscall, just return.
847	 */
848	RESTORE_ALL
849
850	.align	4
851	.globl	sys_rt_sigreturn
852sys_rt_sigreturn:
853	call	do_rt_sigreturn
854	 add	%sp, STACKFRAME_SZ, %o0
855
856	ld	[%curptr + TI_FLAGS], %l5
857	andcc	%l5, _TIF_SYSCALL_TRACE, %g0
858	be	1f
859	 nop
860
861	add	%sp, STACKFRAME_SZ, %o0
862	call	syscall_trace
863	 mov	1, %o1
864
8651:
866	/* We are returning to a signal handler. */
867	RESTORE_ALL
868
869	/* Now that we have a real sys_clone, sys_fork() is
870	 * implemented in terms of it.  Our _real_ implementation
871	 * of SunOS vfork() will use sys_vfork().
872	 *
873	 * XXX These three should be consolidated into mostly shared
874	 * XXX code just like on sparc64... -DaveM
875	 */
876	.align	4
877	.globl	sys_fork, flush_patch_two
878sys_fork:
879	mov	%o7, %l5
880flush_patch_two:
881	FLUSH_ALL_KERNEL_WINDOWS;
882	ld	[%curptr + TI_TASK], %o4
883	rd	%psr, %g4
884	WRITE_PAUSE
885	mov	SIGCHLD, %o0			! arg0:	clone flags
886	rd	%wim, %g5
887	WRITE_PAUSE
888	mov	%fp, %o1			! arg1:	usp
889	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
890	add	%sp, STACKFRAME_SZ, %o2		! arg2:	pt_regs ptr
891	mov	0, %o3
892	call	sparc_do_fork
893	 mov	%l5, %o7
894
895	/* Whee, kernel threads! */
896	.globl	sys_clone, flush_patch_three
897sys_clone:
898	mov	%o7, %l5
899flush_patch_three:
900	FLUSH_ALL_KERNEL_WINDOWS;
901	ld	[%curptr + TI_TASK], %o4
902	rd	%psr, %g4
903	WRITE_PAUSE
904
905	/* arg0,1: flags,usp  -- loaded already */
906	cmp	%o1, 0x0			! Is new_usp NULL?
907	rd	%wim, %g5
908	WRITE_PAUSE
909	be,a	1f
910	 mov	%fp, %o1			! yes, use callers usp
911	andn	%o1, 7, %o1			! no, align to 8 bytes
9121:
913	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
914	add	%sp, STACKFRAME_SZ, %o2		! arg2:	pt_regs ptr
915	mov	0, %o3
916	call	sparc_do_fork
917	 mov	%l5, %o7
918
919	/* Whee, real vfork! */
920	.globl	sys_vfork, flush_patch_four
921sys_vfork:
922flush_patch_four:
923	FLUSH_ALL_KERNEL_WINDOWS;
924	ld	[%curptr + TI_TASK], %o4
925	rd	%psr, %g4
926	WRITE_PAUSE
927	rd	%wim, %g5
928	WRITE_PAUSE
929	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
930	sethi	%hi(0x4000 | 0x0100 | SIGCHLD), %o0
931	mov	%fp, %o1
932	or	%o0, %lo(0x4000 | 0x0100 | SIGCHLD), %o0
933	sethi	%hi(sparc_do_fork), %l1
934	mov	0, %o3
935	jmpl	%l1 + %lo(sparc_do_fork), %g0
936	 add	%sp, STACKFRAME_SZ, %o2
937
938        .align  4
939linux_sparc_ni_syscall:
940	sethi   %hi(sys_ni_syscall), %l7
941	b       do_syscall
942	 or     %l7, %lo(sys_ni_syscall), %l7
943
944linux_syscall_trace:
945	add	%sp, STACKFRAME_SZ, %o0
946	call	syscall_trace
947	 mov	0, %o1
948	cmp	%o0, 0
949	bne	3f
950	 mov	-ENOSYS, %o0
951	mov	%i0, %o0
952	mov	%i1, %o1
953	mov	%i2, %o2
954	mov	%i3, %o3
955	b	2f
956	 mov	%i4, %o4
957
958	.globl	ret_from_fork
959ret_from_fork:
960	call	schedule_tail
961	 ld	[%g3 + TI_TASK], %o0
962	b	ret_sys_call
963	 ld	[%sp + STACKFRAME_SZ + PT_I0], %o0
964
965	.globl	ret_from_kernel_thread
966ret_from_kernel_thread:
967	call	schedule_tail
968	 ld	[%g3 + TI_TASK], %o0
969	ld	[%sp + STACKFRAME_SZ + PT_G1], %l0
970	call	%l0
971	 ld	[%sp + STACKFRAME_SZ + PT_G2], %o0
972	rd	%psr, %l1
973	ld	[%sp + STACKFRAME_SZ + PT_PSR], %l0
974	andn	%l0, PSR_CWP, %l0
975	nop
976	and	%l1, PSR_CWP, %l1
977	or	%l0, %l1, %l0
978	st	%l0, [%sp + STACKFRAME_SZ + PT_PSR]
979	b	ret_sys_call
980	 mov	0, %o0
981
982	/* Linux native system calls enter here... */
983	.align	4
984	.globl	linux_sparc_syscall
985linux_sparc_syscall:
986	sethi	%hi(PSR_SYSCALL), %l4
987	or	%l0, %l4, %l0
988	/* Direct access to user regs, must faster. */
989	cmp	%g1, NR_syscalls
990	bgeu	linux_sparc_ni_syscall
991	 sll	%g1, 2, %l4
992	ld	[%l7 + %l4], %l7
993
994do_syscall:
995	SAVE_ALL_HEAD
996	 rd	%wim, %l3
997
998	wr	%l0, PSR_ET, %psr
999	mov	%i0, %o0
1000	mov	%i1, %o1
1001	mov	%i2, %o2
1002
1003	ld	[%curptr + TI_FLAGS], %l5
1004	mov	%i3, %o3
1005	andcc	%l5, _TIF_SYSCALL_TRACE, %g0
1006	mov	%i4, %o4
1007	bne	linux_syscall_trace
1008	 mov	%i0, %l5
10092:
1010	call	%l7
1011	 mov	%i5, %o5
1012
10133:
1014	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
1015
1016ret_sys_call:
1017	ld	[%curptr + TI_FLAGS], %l6
1018	cmp	%o0, -ERESTART_RESTARTBLOCK
1019	ld	[%sp + STACKFRAME_SZ + PT_PSR], %g3
1020	set	PSR_C, %g2
1021	bgeu	1f
1022	 andcc	%l6, _TIF_SYSCALL_TRACE, %g0
1023
1024	/* System call success, clear Carry condition code. */
1025	andn	%g3, %g2, %g3
1026	clr	%l6
1027	st	%g3, [%sp + STACKFRAME_SZ + PT_PSR]
1028	bne	linux_syscall_trace2
1029	 ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */
1030	add	%l1, 0x4, %l2			/* npc = npc+4 */
1031	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
1032	b	ret_trap_entry
1033	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
10341:
1035	/* System call failure, set Carry condition code.
1036	 * Also, get abs(errno) to return to the process.
1037	 */
1038	sub	%g0, %o0, %o0
1039	or	%g3, %g2, %g3
1040	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
1041	mov	1, %l6
1042	st	%g3, [%sp + STACKFRAME_SZ + PT_PSR]
1043	bne	linux_syscall_trace2
1044	 ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */
1045	add	%l1, 0x4, %l2			/* npc = npc+4 */
1046	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
1047	b	ret_trap_entry
1048	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
1049
1050linux_syscall_trace2:
1051	add	%sp, STACKFRAME_SZ, %o0
1052	mov	1, %o1
1053	call	syscall_trace
1054	 add	%l1, 0x4, %l2			/* npc = npc+4 */
1055	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
1056	b	ret_trap_entry
1057	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
1058
1059
1060/* Saving and restoring the FPU state is best done from lowlevel code.
1061 *
1062 * void fpsave(unsigned long *fpregs, unsigned long *fsr,
1063 *             void *fpqueue, unsigned long *fpqdepth)
1064 */
1065
1066	.globl	fpsave
1067fpsave:
1068	st	%fsr, [%o1]	! this can trap on us if fpu is in bogon state
1069	ld	[%o1], %g1
1070	set	0x2000, %g4
1071	andcc	%g1, %g4, %g0
1072	be	2f
1073	 mov	0, %g2
1074
1075	/* We have an fpqueue to save. */
10761:
1077	std	%fq, [%o2]
1078fpsave_magic:
1079	st	%fsr, [%o1]
1080	ld	[%o1], %g3
1081	andcc	%g3, %g4, %g0
1082	add	%g2, 1, %g2
1083	bne	1b
1084	 add	%o2, 8, %o2
1085
10862:
1087	st	%g2, [%o3]
1088
1089	std	%f0, [%o0 + 0x00]
1090	std	%f2, [%o0 + 0x08]
1091	std	%f4, [%o0 + 0x10]
1092	std	%f6, [%o0 + 0x18]
1093	std	%f8, [%o0 + 0x20]
1094	std	%f10, [%o0 + 0x28]
1095	std	%f12, [%o0 + 0x30]
1096	std	%f14, [%o0 + 0x38]
1097	std	%f16, [%o0 + 0x40]
1098	std	%f18, [%o0 + 0x48]
1099	std	%f20, [%o0 + 0x50]
1100	std	%f22, [%o0 + 0x58]
1101	std	%f24, [%o0 + 0x60]
1102	std	%f26, [%o0 + 0x68]
1103	std	%f28, [%o0 + 0x70]
1104	retl
1105	 std	%f30, [%o0 + 0x78]
1106
1107	/* Thanks for Theo Deraadt and the authors of the Sprite/netbsd/openbsd
1108	 * code for pointing out this possible deadlock, while we save state
1109	 * above we could trap on the fsr store so our low level fpu trap
1110	 * code has to know how to deal with this.
1111	 */
1112fpsave_catch:
1113	b	fpsave_magic + 4
1114	 st	%fsr, [%o1]
1115
1116fpsave_catch2:
1117	b	fpsave + 4
1118	 st	%fsr, [%o1]
1119
1120	/* void fpload(unsigned long *fpregs, unsigned long *fsr); */
1121
1122	.globl	fpload
1123fpload:
1124	ldd	[%o0 + 0x00], %f0
1125	ldd	[%o0 + 0x08], %f2
1126	ldd	[%o0 + 0x10], %f4
1127	ldd	[%o0 + 0x18], %f6
1128	ldd	[%o0 + 0x20], %f8
1129	ldd	[%o0 + 0x28], %f10
1130	ldd	[%o0 + 0x30], %f12
1131	ldd	[%o0 + 0x38], %f14
1132	ldd	[%o0 + 0x40], %f16
1133	ldd	[%o0 + 0x48], %f18
1134	ldd	[%o0 + 0x50], %f20
1135	ldd	[%o0 + 0x58], %f22
1136	ldd	[%o0 + 0x60], %f24
1137	ldd	[%o0 + 0x68], %f26
1138	ldd	[%o0 + 0x70], %f28
1139	ldd	[%o0 + 0x78], %f30
1140	ld	[%o1], %fsr
1141	retl
1142	 nop
1143
1144	/* __ndelay and __udelay take two arguments:
1145	 * 0 - nsecs or usecs to delay
1146	 * 1 - per_cpu udelay_val (loops per jiffy)
1147	 *
1148	 * Note that ndelay gives HZ times higher resolution but has a 10ms
1149	 * limit.  udelay can handle up to 1s.
1150	 */
1151	.globl	__ndelay
1152__ndelay:
1153	save	%sp, -STACKFRAME_SZ, %sp
1154	mov	%i0, %o0		! round multiplier up so large ns ok
1155	mov	0x1ae, %o1		! 2**32 / (1 000 000 000 / HZ)
1156	umul	%o0, %o1, %o0
1157	rd	%y, %o1
1158	mov	%i1, %o1		! udelay_val
1159	umul	%o0, %o1, %o0
1160	rd	%y, %o1
1161	ba	delay_continue
1162	 mov	%o1, %o0		! >>32 later for better resolution
1163
1164	.globl	__udelay
1165__udelay:
1166	save	%sp, -STACKFRAME_SZ, %sp
1167	mov	%i0, %o0
1168	sethi	%hi(0x10c7), %o1	! round multiplier up so large us ok
1169	or	%o1, %lo(0x10c7), %o1	! 2**32 / 1 000 000
1170	umul	%o0, %o1, %o0
1171	rd	%y, %o1
1172	mov	%i1, %o1		! udelay_val
1173	umul	%o0, %o1, %o0
1174	rd	%y, %o1
1175	sethi	%hi(0x028f4b62), %l0	! Add in rounding constant * 2**32,
1176	or	%g0, %lo(0x028f4b62), %l0
1177	addcc	%o0, %l0, %o0		! 2**32 * 0.009 999
1178	bcs,a	3f
1179	 add	%o1, 0x01, %o1
11803:
1181	mov	HZ, %o0			! >>32 earlier for wider range
1182	umul	%o0, %o1, %o0
1183	rd	%y, %o1
1184
1185delay_continue:
1186	cmp	%o0, 0x0
11871:
1188	bne	1b
1189	 subcc	%o0, 1, %o0
1190
1191	ret
1192	restore
1193
1194	/* Handle a software breakpoint */
1195	/* We have to inform parent that child has stopped */
1196	.align 4
1197	.globl breakpoint_trap
1198breakpoint_trap:
1199	rd	%wim,%l3
1200	SAVE_ALL
1201	wr 	%l0, PSR_ET, %psr
1202	WRITE_PAUSE
1203
1204	st	%i0, [%sp + STACKFRAME_SZ + PT_G0] ! for restarting syscalls
1205	call	sparc_breakpoint
1206	 add	%sp, STACKFRAME_SZ, %o0
1207
1208	RESTORE_ALL
1209
1210#ifdef CONFIG_KGDB
1211	.align	4
1212	.globl	kgdb_trap_low
1213	.type	kgdb_trap_low,#function
1214kgdb_trap_low:
1215	rd	%wim,%l3
1216	SAVE_ALL
1217	wr 	%l0, PSR_ET, %psr
1218	WRITE_PAUSE
1219
1220	call	kgdb_trap
1221	 add	%sp, STACKFRAME_SZ, %o0
1222
1223	RESTORE_ALL
1224	.size	kgdb_trap_low,.-kgdb_trap_low
1225#endif
1226
1227	.align	4
1228	.globl	flush_patch_exception
1229flush_patch_exception:
1230	FLUSH_ALL_KERNEL_WINDOWS;
1231	ldd	[%o0], %o6
1232	jmpl	%o7 + 0xc, %g0			! see asm-sparc/processor.h
1233	 mov	1, %g1				! signal EFAULT condition
1234
1235	.align	4
1236	.globl	kill_user_windows, kuw_patch1_7win
1237	.globl	kuw_patch1
1238kuw_patch1_7win:	sll	%o3, 6, %o3
1239
1240	/* No matter how much overhead this routine has in the worst
1241	 * case scenerio, it is several times better than taking the
1242	 * traps with the old method of just doing flush_user_windows().
1243	 */
1244kill_user_windows:
1245	ld	[%g6 + TI_UWINMASK], %o0	! get current umask
1246	orcc	%g0, %o0, %g0			! if no bits set, we are done
1247	be	3f				! nothing to do
1248	 rd	%psr, %o5			! must clear interrupts
1249	or	%o5, PSR_PIL, %o4		! or else that could change
1250	wr	%o4, 0x0, %psr			! the uwinmask state
1251	WRITE_PAUSE				! burn them cycles
12521:
1253	ld	[%g6 + TI_UWINMASK], %o0	! get consistent state
1254	orcc	%g0, %o0, %g0			! did an interrupt come in?
1255	be	4f				! yep, we are done
1256	 rd	%wim, %o3			! get current wim
1257	srl	%o3, 1, %o4			! simulate a save
1258kuw_patch1:
1259	sll	%o3, 7, %o3			! compute next wim
1260	or	%o4, %o3, %o3			! result
1261	andncc	%o0, %o3, %o0			! clean this bit in umask
1262	bne	kuw_patch1			! not done yet
1263	 srl	%o3, 1, %o4			! begin another save simulation
1264	wr	%o3, 0x0, %wim			! set the new wim
1265	st	%g0, [%g6 + TI_UWINMASK]	! clear uwinmask
12664:
1267	wr	%o5, 0x0, %psr			! re-enable interrupts
1268	WRITE_PAUSE				! burn baby burn
12693:
1270	retl					! return
1271	 st	%g0, [%g6 + TI_W_SAVED]		! no windows saved
1272
1273	.align	4
1274	.globl	restore_current
1275restore_current:
1276	LOAD_CURRENT(g6, o0)
1277	retl
1278	 nop
1279
1280#ifdef CONFIG_PCIC_PCI
1281#include <asm/pcic.h>
1282
1283	.align	4
1284	.globl	linux_trap_ipi15_pcic
1285linux_trap_ipi15_pcic:
1286	rd	%wim, %l3
1287	SAVE_ALL
1288
1289	/*
1290	 * First deactivate NMI
1291	 * or we cannot drop ET, cannot get window spill traps.
1292	 * The busy loop is necessary because the PIO error
1293	 * sometimes does not go away quickly and we trap again.
1294	 */
1295	sethi	%hi(pcic_regs), %o1
1296	ld	[%o1 + %lo(pcic_regs)], %o2
1297
1298	! Get pending status for printouts later.
1299	ld	[%o2 + PCI_SYS_INT_PENDING], %o0
1300
1301	mov	PCI_SYS_INT_PENDING_CLEAR_ALL, %o1
1302	stb	%o1, [%o2 + PCI_SYS_INT_PENDING_CLEAR]
13031:
1304	ld	[%o2 + PCI_SYS_INT_PENDING], %o1
1305	andcc	%o1, ((PCI_SYS_INT_PENDING_PIO|PCI_SYS_INT_PENDING_PCI)>>24), %g0
1306	bne	1b
1307	 nop
1308
1309	or	%l0, PSR_PIL, %l4
1310	wr	%l4, 0x0, %psr
1311	WRITE_PAUSE
1312	wr	%l4, PSR_ET, %psr
1313	WRITE_PAUSE
1314
1315	call	pcic_nmi
1316	 add	%sp, STACKFRAME_SZ, %o1	! struct pt_regs *regs
1317	RESTORE_ALL
1318
1319	.globl	pcic_nmi_trap_patch
1320pcic_nmi_trap_patch:
1321	sethi	%hi(linux_trap_ipi15_pcic), %l3
1322	jmpl	%l3 + %lo(linux_trap_ipi15_pcic), %g0
1323	 rd	%psr, %l0
1324	.word	0
1325
1326#endif /* CONFIG_PCIC_PCI */
1327
1328	.globl	flushw_all
1329flushw_all:
1330	save	%sp, -0x40, %sp
1331	save	%sp, -0x40, %sp
1332	save	%sp, -0x40, %sp
1333	save	%sp, -0x40, %sp
1334	save	%sp, -0x40, %sp
1335	save	%sp, -0x40, %sp
1336	save	%sp, -0x40, %sp
1337	restore
1338	restore
1339	restore
1340	restore
1341	restore
1342	restore
1343	ret
1344	 restore
1345
1346#ifdef CONFIG_SMP
1347ENTRY(hard_smp_processor_id)
1348661:	rd		%tbr, %g1
1349	srl		%g1, 12, %o0
1350	and		%o0, 3, %o0
1351	.section	.cpuid_patch, "ax"
1352	/* Instruction location. */
1353	.word		661b
1354	/* SUN4D implementation. */
1355	lda		[%g0] ASI_M_VIKING_TMP1, %o0
1356	nop
1357	nop
1358	/* LEON implementation. */
1359	rd		%asr17, %o0
1360	srl		%o0, 0x1c, %o0
1361	nop
1362	.previous
1363	retl
1364	 nop
1365ENDPROC(hard_smp_processor_id)
1366#endif
1367
1368/* End of entry.S */
1369