1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * uaccess.h: User space memore access functions. 4 * 5 * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) 6 * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) 7 */ 8 #ifndef _ASM_UACCESS_H 9 #define _ASM_UACCESS_H 10 11 #include <linux/compiler.h> 12 #include <linux/string.h> 13 14 #include <asm/processor.h> 15 16 #define ARCH_HAS_SORT_EXTABLE 17 #define ARCH_HAS_SEARCH_EXTABLE 18 19 /* Sparc is not segmented, however we need to be able to fool access_ok() 20 * when doing system calls from kernel mode legitimately. 21 * 22 * "For historical reasons, these macros are grossly misnamed." -Linus 23 */ 24 25 #define KERNEL_DS ((mm_segment_t) { 0 }) 26 #define USER_DS ((mm_segment_t) { -1 }) 27 28 #define get_fs() (current->thread.current_ds) 29 #define set_fs(val) ((current->thread.current_ds) = (val)) 30 31 #define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg) 32 33 /* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test 34 * can be fairly lightweight. 35 * No one can read/write anything from userland in the kernel space by setting 36 * large size and address near to PAGE_OFFSET - a fault will break his intentions. 37 */ 38 #define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; }) 39 #define __kernel_ok (uaccess_kernel()) 40 #define __access_ok(addr, size) (__user_ok((addr) & get_fs().seg, (size))) 41 #define access_ok(addr, size) __access_ok((unsigned long)(addr), size) 42 43 /* 44 * The exception table consists of pairs of addresses: the first is the 45 * address of an instruction that is allowed to fault, and the second is 46 * the address at which the program should continue. No registers are 47 * modified, so it is entirely up to the continuation code to figure out 48 * what to do. 49 * 50 * All the routines below use bits of fixup code that are out of line 51 * with the main instruction path. This means when everything is well, 52 * we don't even have to jump over them. Further, they do not intrude 53 * on our cache or tlb entries. 54 * 55 * There is a special way how to put a range of potentially faulting 56 * insns (like twenty ldd/std's with now intervening other instructions) 57 * You specify address of first in insn and 0 in fixup and in the next 58 * exception_table_entry you specify last potentially faulting insn + 1 59 * and in fixup the routine which should handle the fault. 60 * That fixup code will get 61 * (faulting_insn_address - first_insn_in_the_range_address)/4 62 * in %g2 (ie. index of the faulting instruction in the range). 63 */ 64 65 struct exception_table_entry 66 { 67 unsigned long insn, fixup; 68 }; 69 70 /* Returns 0 if exception not found and fixup otherwise. */ 71 unsigned long search_extables_range(unsigned long addr, unsigned long *g2); 72 73 /* Uh, these should become the main single-value transfer routines.. 74 * They automatically use the right size if we just have the right 75 * pointer type.. 76 * 77 * This gets kind of ugly. We want to return _two_ values in "get_user()" 78 * and yet we don't want to do any pointers, because that is too much 79 * of a performance impact. Thus we have a few rather ugly macros here, 80 * and hide all the ugliness from the user. 81 */ 82 #define put_user(x, ptr) ({ \ 83 unsigned long __pu_addr = (unsigned long)(ptr); \ 84 __chk_user_ptr(ptr); \ 85 __put_user_check((__typeof__(*(ptr)))(x), __pu_addr, sizeof(*(ptr))); \ 86 }) 87 88 #define get_user(x, ptr) ({ \ 89 unsigned long __gu_addr = (unsigned long)(ptr); \ 90 __chk_user_ptr(ptr); \ 91 __get_user_check((x), __gu_addr, sizeof(*(ptr)), __typeof__(*(ptr))); \ 92 }) 93 94 /* 95 * The "__xxx" versions do not do address space checking, useful when 96 * doing multiple accesses to the same area (the user has to do the 97 * checks by hand with "access_ok()") 98 */ 99 #define __put_user(x, ptr) \ 100 __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) 101 #define __get_user(x, ptr) \ 102 __get_user_nocheck((x), (ptr), sizeof(*(ptr)), __typeof__(*(ptr))) 103 104 struct __large_struct { unsigned long buf[100]; }; 105 #define __m(x) ((struct __large_struct __user *)(x)) 106 107 #define __put_user_check(x, addr, size) ({ \ 108 register int __pu_ret; \ 109 if (__access_ok(addr, size)) { \ 110 switch (size) { \ 111 case 1: \ 112 __put_user_asm(x, b, addr, __pu_ret); \ 113 break; \ 114 case 2: \ 115 __put_user_asm(x, h, addr, __pu_ret); \ 116 break; \ 117 case 4: \ 118 __put_user_asm(x, , addr, __pu_ret); \ 119 break; \ 120 case 8: \ 121 __put_user_asm(x, d, addr, __pu_ret); \ 122 break; \ 123 default: \ 124 __pu_ret = __put_user_bad(); \ 125 break; \ 126 } \ 127 } else { \ 128 __pu_ret = -EFAULT; \ 129 } \ 130 __pu_ret; \ 131 }) 132 133 #define __put_user_nocheck(x, addr, size) ({ \ 134 register int __pu_ret; \ 135 switch (size) { \ 136 case 1: __put_user_asm(x, b, addr, __pu_ret); break; \ 137 case 2: __put_user_asm(x, h, addr, __pu_ret); break; \ 138 case 4: __put_user_asm(x, , addr, __pu_ret); break; \ 139 case 8: __put_user_asm(x, d, addr, __pu_ret); break; \ 140 default: __pu_ret = __put_user_bad(); break; \ 141 } \ 142 __pu_ret; \ 143 }) 144 145 #define __put_user_asm(x, size, addr, ret) \ 146 __asm__ __volatile__( \ 147 "/* Put user asm, inline. */\n" \ 148 "1:\t" "st"#size " %1, %2\n\t" \ 149 "clr %0\n" \ 150 "2:\n\n\t" \ 151 ".section .fixup,#alloc,#execinstr\n\t" \ 152 ".align 4\n" \ 153 "3:\n\t" \ 154 "b 2b\n\t" \ 155 " mov %3, %0\n\t" \ 156 ".previous\n\n\t" \ 157 ".section __ex_table,#alloc\n\t" \ 158 ".align 4\n\t" \ 159 ".word 1b, 3b\n\t" \ 160 ".previous\n\n\t" \ 161 : "=&r" (ret) : "r" (x), "m" (*__m(addr)), \ 162 "i" (-EFAULT)) 163 164 int __put_user_bad(void); 165 166 #define __get_user_check(x, addr, size, type) ({ \ 167 register int __gu_ret; \ 168 register unsigned long __gu_val; \ 169 if (__access_ok(addr, size)) { \ 170 switch (size) { \ 171 case 1: \ 172 __get_user_asm(__gu_val, ub, addr, __gu_ret); \ 173 break; \ 174 case 2: \ 175 __get_user_asm(__gu_val, uh, addr, __gu_ret); \ 176 break; \ 177 case 4: \ 178 __get_user_asm(__gu_val, , addr, __gu_ret); \ 179 break; \ 180 case 8: \ 181 __get_user_asm(__gu_val, d, addr, __gu_ret); \ 182 break; \ 183 default: \ 184 __gu_val = 0; \ 185 __gu_ret = __get_user_bad(); \ 186 break; \ 187 } \ 188 } else { \ 189 __gu_val = 0; \ 190 __gu_ret = -EFAULT; \ 191 } \ 192 x = (__force type) __gu_val; \ 193 __gu_ret; \ 194 }) 195 196 #define __get_user_nocheck(x, addr, size, type) ({ \ 197 register int __gu_ret; \ 198 register unsigned long __gu_val; \ 199 switch (size) { \ 200 case 1: __get_user_asm(__gu_val, ub, addr, __gu_ret); break; \ 201 case 2: __get_user_asm(__gu_val, uh, addr, __gu_ret); break; \ 202 case 4: __get_user_asm(__gu_val, , addr, __gu_ret); break; \ 203 case 8: __get_user_asm(__gu_val, d, addr, __gu_ret); break; \ 204 default: \ 205 __gu_val = 0; \ 206 __gu_ret = __get_user_bad(); \ 207 break; \ 208 } \ 209 x = (__force type) __gu_val; \ 210 __gu_ret; \ 211 }) 212 213 #define __get_user_asm(x, size, addr, ret) \ 214 __asm__ __volatile__( \ 215 "/* Get user asm, inline. */\n" \ 216 "1:\t" "ld"#size " %2, %1\n\t" \ 217 "clr %0\n" \ 218 "2:\n\n\t" \ 219 ".section .fixup,#alloc,#execinstr\n\t" \ 220 ".align 4\n" \ 221 "3:\n\t" \ 222 "clr %1\n\t" \ 223 "b 2b\n\t" \ 224 " mov %3, %0\n\n\t" \ 225 ".previous\n\t" \ 226 ".section __ex_table,#alloc\n\t" \ 227 ".align 4\n\t" \ 228 ".word 1b, 3b\n\n\t" \ 229 ".previous\n\t" \ 230 : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)), \ 231 "i" (-EFAULT)) 232 233 int __get_user_bad(void); 234 235 unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size); 236 237 static inline unsigned long raw_copy_to_user(void __user *to, const void *from, unsigned long n) 238 { 239 return __copy_user(to, (__force void __user *) from, n); 240 } 241 242 static inline unsigned long raw_copy_from_user(void *to, const void __user *from, unsigned long n) 243 { 244 return __copy_user((__force void __user *) to, from, n); 245 } 246 247 #define INLINE_COPY_FROM_USER 248 #define INLINE_COPY_TO_USER 249 250 static inline unsigned long __clear_user(void __user *addr, unsigned long size) 251 { 252 unsigned long ret; 253 254 __asm__ __volatile__ ( 255 ".section __ex_table,#alloc\n\t" 256 ".align 4\n\t" 257 ".word 1f,3\n\t" 258 ".previous\n\t" 259 "mov %2, %%o1\n" 260 "1:\n\t" 261 "call __bzero\n\t" 262 " mov %1, %%o0\n\t" 263 "mov %%o0, %0\n" 264 : "=r" (ret) : "r" (addr), "r" (size) : 265 "o0", "o1", "o2", "o3", "o4", "o5", "o7", 266 "g1", "g2", "g3", "g4", "g5", "g7", "cc"); 267 268 return ret; 269 } 270 271 static inline unsigned long clear_user(void __user *addr, unsigned long n) 272 { 273 if (n && __access_ok((unsigned long) addr, n)) 274 return __clear_user(addr, n); 275 else 276 return n; 277 } 278 279 __must_check long strnlen_user(const char __user *str, long n); 280 281 #endif /* _ASM_UACCESS_H */ 282