1 /*
2  * uaccess.h: User space memore access functions.
3  *
4  * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
5  * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
6  */
7 #ifndef _ASM_UACCESS_H
8 #define _ASM_UACCESS_H
9 
10 #ifdef __KERNEL__
11 #include <linux/compiler.h>
12 #include <linux/sched.h>
13 #include <linux/string.h>
14 #include <linux/errno.h>
15 #include <asm/vac-ops.h>
16 #endif
17 
18 #ifndef __ASSEMBLY__
19 
20 #define ARCH_HAS_SORT_EXTABLE
21 #define ARCH_HAS_SEARCH_EXTABLE
22 
23 /* Sparc is not segmented, however we need to be able to fool access_ok()
24  * when doing system calls from kernel mode legitimately.
25  *
26  * "For historical reasons, these macros are grossly misnamed." -Linus
27  */
28 
29 #define KERNEL_DS   ((mm_segment_t) { 0 })
30 #define USER_DS     ((mm_segment_t) { -1 })
31 
32 #define VERIFY_READ	0
33 #define VERIFY_WRITE	1
34 
35 #define get_ds()	(KERNEL_DS)
36 #define get_fs()	(current->thread.current_ds)
37 #define set_fs(val)	((current->thread.current_ds) = (val))
38 
39 #define segment_eq(a,b)	((a).seg == (b).seg)
40 
41 /* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test
42  * can be fairly lightweight.
43  * No one can read/write anything from userland in the kernel space by setting
44  * large size and address near to PAGE_OFFSET - a fault will break his intentions.
45  */
46 #define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; })
47 #define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
48 #define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size)))
49 #define access_ok(type, addr, size)					\
50 	({ (void)(type); __access_ok((unsigned long)(addr), size); })
51 
52 /*
53  * The exception table consists of pairs of addresses: the first is the
54  * address of an instruction that is allowed to fault, and the second is
55  * the address at which the program should continue.  No registers are
56  * modified, so it is entirely up to the continuation code to figure out
57  * what to do.
58  *
59  * All the routines below use bits of fixup code that are out of line
60  * with the main instruction path.  This means when everything is well,
61  * we don't even have to jump over them.  Further, they do not intrude
62  * on our cache or tlb entries.
63  *
64  * There is a special way how to put a range of potentially faulting
65  * insns (like twenty ldd/std's with now intervening other instructions)
66  * You specify address of first in insn and 0 in fixup and in the next
67  * exception_table_entry you specify last potentially faulting insn + 1
68  * and in fixup the routine which should handle the fault.
69  * That fixup code will get
70  * (faulting_insn_address - first_insn_in_the_range_address)/4
71  * in %g2 (ie. index of the faulting instruction in the range).
72  */
73 
74 struct exception_table_entry
75 {
76         unsigned long insn, fixup;
77 };
78 
79 /* Returns 0 if exception not found and fixup otherwise.  */
80 extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2);
81 
82 extern void __ret_efault(void);
83 
84 /* Uh, these should become the main single-value transfer routines..
85  * They automatically use the right size if we just have the right
86  * pointer type..
87  *
88  * This gets kind of ugly. We want to return _two_ values in "get_user()"
89  * and yet we don't want to do any pointers, because that is too much
90  * of a performance impact. Thus we have a few rather ugly macros here,
91  * and hide all the ugliness from the user.
92  */
93 #define put_user(x,ptr) ({ \
94 unsigned long __pu_addr = (unsigned long)(ptr); \
95 __chk_user_ptr(ptr); \
96 __put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
97 
98 #define get_user(x,ptr) ({ \
99 unsigned long __gu_addr = (unsigned long)(ptr); \
100 __chk_user_ptr(ptr); \
101 __get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
102 
103 /*
104  * The "__xxx" versions do not do address space checking, useful when
105  * doing multiple accesses to the same area (the user has to do the
106  * checks by hand with "access_ok()")
107  */
108 #define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
109 #define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr)))
110 
111 struct __large_struct { unsigned long buf[100]; };
112 #define __m(x) ((struct __large_struct __user *)(x))
113 
114 #define __put_user_check(x,addr,size) ({ \
115 register int __pu_ret; \
116 if (__access_ok(addr,size)) { \
117 switch (size) { \
118 case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
119 case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
120 case 4: __put_user_asm(x,,addr,__pu_ret); break; \
121 case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
122 default: __pu_ret = __put_user_bad(); break; \
123 } } else { __pu_ret = -EFAULT; } __pu_ret; })
124 
125 #define __put_user_nocheck(x,addr,size) ({ \
126 register int __pu_ret; \
127 switch (size) { \
128 case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
129 case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
130 case 4: __put_user_asm(x,,addr,__pu_ret); break; \
131 case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
132 default: __pu_ret = __put_user_bad(); break; \
133 } __pu_ret; })
134 
135 #define __put_user_asm(x,size,addr,ret)					\
136 __asm__ __volatile__(							\
137 	"/* Put user asm, inline. */\n"					\
138 "1:\t"	"st"#size " %1, %2\n\t"						\
139 	"clr	%0\n"							\
140 "2:\n\n\t"								\
141 	".section .fixup,#alloc,#execinstr\n\t"				\
142 	".align	4\n"							\
143 "3:\n\t"								\
144 	"b	2b\n\t"							\
145 	" mov	%3, %0\n\t"						\
146         ".previous\n\n\t"						\
147 	".section __ex_table,#alloc\n\t"				\
148 	".align	4\n\t"							\
149 	".word	1b, 3b\n\t"						\
150 	".previous\n\n\t"						\
151        : "=&r" (ret) : "r" (x), "m" (*__m(addr)),			\
152 	 "i" (-EFAULT))
153 
154 extern int __put_user_bad(void);
155 
156 #define __get_user_check(x,addr,size,type) ({ \
157 register int __gu_ret; \
158 register unsigned long __gu_val; \
159 if (__access_ok(addr,size)) { \
160 switch (size) { \
161 case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
162 case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
163 case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
164 case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
165 default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
166 } } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; })
167 
168 #define __get_user_check_ret(x,addr,size,type,retval) ({ \
169 register unsigned long __gu_val __asm__ ("l1"); \
170 if (__access_ok(addr,size)) { \
171 switch (size) { \
172 case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
173 case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
174 case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
175 case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
176 default: if (__get_user_bad()) return retval; \
177 } x = (type) __gu_val; } else return retval; })
178 
179 #define __get_user_nocheck(x,addr,size,type) ({ \
180 register int __gu_ret; \
181 register unsigned long __gu_val; \
182 switch (size) { \
183 case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
184 case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
185 case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
186 case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
187 default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
188 } x = (type) __gu_val; __gu_ret; })
189 
190 #define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \
191 register unsigned long __gu_val __asm__ ("l1"); \
192 switch (size) { \
193 case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
194 case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
195 case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
196 case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
197 default: if (__get_user_bad()) return retval; \
198 } x = (type) __gu_val; })
199 
200 #define __get_user_asm(x,size,addr,ret)					\
201 __asm__ __volatile__(							\
202 	"/* Get user asm, inline. */\n"					\
203 "1:\t"	"ld"#size " %2, %1\n\t"						\
204 	"clr	%0\n"							\
205 "2:\n\n\t"								\
206 	".section .fixup,#alloc,#execinstr\n\t"				\
207 	".align	4\n"							\
208 "3:\n\t"								\
209 	"clr	%1\n\t"							\
210 	"b	2b\n\t"							\
211 	" mov	%3, %0\n\n\t"						\
212 	".previous\n\t"							\
213 	".section __ex_table,#alloc\n\t"				\
214 	".align	4\n\t"							\
215 	".word	1b, 3b\n\n\t"						\
216 	".previous\n\t"							\
217        : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)),			\
218 	 "i" (-EFAULT))
219 
220 #define __get_user_asm_ret(x,size,addr,retval)				\
221 if (__builtin_constant_p(retval) && retval == -EFAULT)			\
222 __asm__ __volatile__(							\
223 	"/* Get user asm ret, inline. */\n"				\
224 "1:\t"	"ld"#size " %1, %0\n\n\t"					\
225 	".section __ex_table,#alloc\n\t"				\
226 	".align	4\n\t"							\
227 	".word	1b,__ret_efault\n\n\t"					\
228 	".previous\n\t"							\
229        : "=&r" (x) : "m" (*__m(addr)));					\
230 else									\
231 __asm__ __volatile__(							\
232 	"/* Get user asm ret, inline. */\n"				\
233 "1:\t"	"ld"#size " %1, %0\n\n\t"					\
234 	".section .fixup,#alloc,#execinstr\n\t"				\
235 	".align	4\n"							\
236 "3:\n\t"								\
237 	"ret\n\t"							\
238 	" restore %%g0, %2, %%o0\n\n\t"					\
239 	".previous\n\t"							\
240 	".section __ex_table,#alloc\n\t"				\
241 	".align	4\n\t"							\
242 	".word	1b, 3b\n\n\t"						\
243 	".previous\n\t"							\
244        : "=&r" (x) : "m" (*__m(addr)), "i" (retval))
245 
246 extern int __get_user_bad(void);
247 
248 extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size);
249 
250 static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
251 {
252 	if (n && __access_ok((unsigned long) to, n))
253 		return __copy_user(to, (__force void __user *) from, n);
254 	else
255 		return n;
256 }
257 
258 static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
259 {
260 	return __copy_user(to, (__force void __user *) from, n);
261 }
262 
263 extern void copy_from_user_overflow(void)
264 #ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
265 	__compiletime_error("copy_from_user() buffer size is not provably correct")
266 #else
267 	__compiletime_warning("copy_from_user() buffer size is not provably correct")
268 #endif
269 ;
270 
271 static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
272 {
273 	int sz = __compiletime_object_size(to);
274 
275 	if (unlikely(sz != -1 && sz < n)) {
276 		copy_from_user_overflow();
277 		return -EFAULT;
278 	}
279 
280 	if (n && __access_ok((unsigned long) from, n))
281 		return __copy_user((__force void __user *) to, from, n);
282 	else
283 		return n;
284 }
285 
286 static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n)
287 {
288 	return __copy_user((__force void __user *) to, from, n);
289 }
290 
291 #define __copy_to_user_inatomic __copy_to_user
292 #define __copy_from_user_inatomic __copy_from_user
293 
294 static inline unsigned long __clear_user(void __user *addr, unsigned long size)
295 {
296 	unsigned long ret;
297 
298 	__asm__ __volatile__ (
299 		".section __ex_table,#alloc\n\t"
300 		".align 4\n\t"
301 		".word 1f,3\n\t"
302 		".previous\n\t"
303 		"mov %2, %%o1\n"
304 		"1:\n\t"
305 		"call __bzero\n\t"
306 		" mov %1, %%o0\n\t"
307 		"mov %%o0, %0\n"
308 		: "=r" (ret) : "r" (addr), "r" (size) :
309 		"o0", "o1", "o2", "o3", "o4", "o5", "o7",
310 		"g1", "g2", "g3", "g4", "g5", "g7", "cc");
311 
312 	return ret;
313 }
314 
315 static inline unsigned long clear_user(void __user *addr, unsigned long n)
316 {
317 	if (n && __access_ok((unsigned long) addr, n))
318 		return __clear_user(addr, n);
319 	else
320 		return n;
321 }
322 
323 extern long __strncpy_from_user(char *dest, const char __user *src, long count);
324 
325 static inline long strncpy_from_user(char *dest, const char __user *src, long count)
326 {
327 	if (__access_ok((unsigned long) src, count))
328 		return __strncpy_from_user(dest, src, count);
329 	else
330 		return -EFAULT;
331 }
332 
333 extern long __strlen_user(const char __user *);
334 extern long __strnlen_user(const char __user *, long len);
335 
336 static inline long strlen_user(const char __user *str)
337 {
338 	if (!access_ok(VERIFY_READ, str, 0))
339 		return 0;
340 	else
341 		return __strlen_user(str);
342 }
343 
344 static inline long strnlen_user(const char __user *str, long len)
345 {
346 	if (!access_ok(VERIFY_READ, str, 0))
347 		return 0;
348 	else
349 		return __strnlen_user(str, len);
350 }
351 
352 #endif  /* __ASSEMBLY__ */
353 
354 #endif /* _ASM_UACCESS_H */
355