xref: /openbmc/linux/arch/sparc/include/asm/tsb.h (revision 3932b9ca)
1 #ifndef _SPARC64_TSB_H
2 #define _SPARC64_TSB_H
3 
4 /* The sparc64 TSB is similar to the powerpc hashtables.  It's a
5  * power-of-2 sized table of TAG/PTE pairs.  The cpu precomputes
6  * pointers into this table for 8K and 64K page sizes, and also a
7  * comparison TAG based upon the virtual address and context which
8  * faults.
9  *
10  * TLB miss trap handler software does the actual lookup via something
11  * of the form:
12  *
13  * 	ldxa		[%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1
14  * 	ldxa		[%g0] ASI_{D,I}MMU, %g6
15  *	sllx		%g6, 22, %g6
16  *	srlx		%g6, 22, %g6
17  * 	ldda		[%g1] ASI_NUCLEUS_QUAD_LDD, %g4
18  * 	cmp		%g4, %g6
19  * 	bne,pn	%xcc, tsb_miss_{d,i}tlb
20  * 	 mov		FAULT_CODE_{D,I}TLB, %g3
21  * 	stxa		%g5, [%g0] ASI_{D,I}TLB_DATA_IN
22  * 	retry
23  *
24  *
25  * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte
26  * PTE.  The TAG is of the same layout as the TLB TAG TARGET mmu
27  * register which is:
28  *
29  * -------------------------------------------------
30  * |  -  |  CONTEXT |  -  |    VADDR bits 63:22    |
31  * -------------------------------------------------
32  *  63 61 60      48 47 42 41                     0
33  *
34  * But actually, since we use per-mm TSB's, we zero out the CONTEXT
35  * field.
36  *
37  * Like the powerpc hashtables we need to use locking in order to
38  * synchronize while we update the entries.  PTE updates need locking
39  * as well.
40  *
41  * We need to carefully choose a lock bits for the TSB entry.  We
42  * choose to use bit 47 in the tag.  Also, since we never map anything
43  * at page zero in context zero, we use zero as an invalid tag entry.
44  * When the lock bit is set, this forces a tag comparison failure.
45  */
46 
47 #define TSB_TAG_LOCK_BIT	47
48 #define TSB_TAG_LOCK_HIGH	(1 << (TSB_TAG_LOCK_BIT - 32))
49 
50 #define TSB_TAG_INVALID_BIT	46
51 #define TSB_TAG_INVALID_HIGH	(1 << (TSB_TAG_INVALID_BIT - 32))
52 
53 /* Some cpus support physical address quad loads.  We want to use
54  * those if possible so we don't need to hard-lock the TSB mapping
55  * into the TLB.  We encode some instruction patching in order to
56  * support this.
57  *
58  * The kernel TSB is locked into the TLB by virtue of being in the
59  * kernel image, so we don't play these games for swapper_tsb access.
60  */
61 #ifndef __ASSEMBLY__
62 struct tsb_ldquad_phys_patch_entry {
63 	unsigned int	addr;
64 	unsigned int	sun4u_insn;
65 	unsigned int	sun4v_insn;
66 };
67 extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch,
68 	__tsb_ldquad_phys_patch_end;
69 
70 struct tsb_phys_patch_entry {
71 	unsigned int	addr;
72 	unsigned int	insn;
73 };
74 extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
75 #endif
76 #define TSB_LOAD_QUAD(TSB, REG)	\
77 661:	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG; \
78 	.section	.tsb_ldquad_phys_patch, "ax"; \
79 	.word		661b; \
80 	ldda		[TSB] ASI_QUAD_LDD_PHYS, REG; \
81 	ldda		[TSB] ASI_QUAD_LDD_PHYS_4V, REG; \
82 	.previous
83 
84 #define TSB_LOAD_TAG_HIGH(TSB, REG) \
85 661:	lduwa		[TSB] ASI_N, REG; \
86 	.section	.tsb_phys_patch, "ax"; \
87 	.word		661b; \
88 	lduwa		[TSB] ASI_PHYS_USE_EC, REG; \
89 	.previous
90 
91 #define TSB_LOAD_TAG(TSB, REG) \
92 661:	ldxa		[TSB] ASI_N, REG; \
93 	.section	.tsb_phys_patch, "ax"; \
94 	.word		661b; \
95 	ldxa		[TSB] ASI_PHYS_USE_EC, REG; \
96 	.previous
97 
98 #define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \
99 661:	casa		[TSB] ASI_N, REG1, REG2; \
100 	.section	.tsb_phys_patch, "ax"; \
101 	.word		661b; \
102 	casa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
103 	.previous
104 
105 #define TSB_CAS_TAG(TSB, REG1, REG2) \
106 661:	casxa		[TSB] ASI_N, REG1, REG2; \
107 	.section	.tsb_phys_patch, "ax"; \
108 	.word		661b; \
109 	casxa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
110 	.previous
111 
112 #define TSB_STORE(ADDR, VAL) \
113 661:	stxa		VAL, [ADDR] ASI_N; \
114 	.section	.tsb_phys_patch, "ax"; \
115 	.word		661b; \
116 	stxa		VAL, [ADDR] ASI_PHYS_USE_EC; \
117 	.previous
118 
119 #define TSB_LOCK_TAG(TSB, REG1, REG2)	\
120 99:	TSB_LOAD_TAG_HIGH(TSB, REG1);	\
121 	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
122 	andcc	REG1, REG2, %g0;	\
123 	bne,pn	%icc, 99b;		\
124 	 nop;				\
125 	TSB_CAS_TAG_HIGH(TSB, REG1, REG2);	\
126 	cmp	REG1, REG2;		\
127 	bne,pn	%icc, 99b;		\
128 	 nop;				\
129 
130 #define TSB_WRITE(TSB, TTE, TAG) \
131 	add	TSB, 0x8, TSB;   \
132 	TSB_STORE(TSB, TTE);     \
133 	sub	TSB, 0x8, TSB;   \
134 	TSB_STORE(TSB, TAG);
135 
136 	/* Do a kernel page table walk.  Leaves physical PTE pointer in
137 	 * REG1.  Jumps to FAIL_LABEL on early page table walk termination.
138 	 * VADDR will not be clobbered, but REG2 will.
139 	 */
140 #define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL)	\
141 	sethi		%hi(swapper_pg_dir), REG1; \
142 	or		REG1, %lo(swapper_pg_dir), REG1; \
143 	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
144 	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
145 	andn		REG2, 0x7, REG2; \
146 	ldx		[REG1 + REG2], REG1; \
147 	brz,pn		REG1, FAIL_LABEL; \
148 	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
149 	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
150 	andn		REG2, 0x7, REG2; \
151 	ldxa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
152 	brz,pn		REG1, FAIL_LABEL; \
153 	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
154 	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
155 	andn		REG2, 0x7, REG2; \
156 	add		REG1, REG2, REG1;
157 
158 	/* PMD has been loaded into REG1, interpret the value, seeing
159 	 * if it is a HUGE PMD or a normal one.  If it is not valid
160 	 * then jump to FAIL_LABEL.  If it is a HUGE PMD, and it
161 	 * translates to a valid PTE, branch to PTE_LABEL.
162 	 *
163 	 * We have to propagate the 4MB bit of the virtual address
164 	 * because we are fabricating 8MB pages using 4MB hw pages.
165 	 */
166 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
167 #define USER_PGTABLE_CHECK_PMD_HUGE(VADDR, REG1, REG2, FAIL_LABEL, PTE_LABEL) \
168 	brz,pn		REG1, FAIL_LABEL;		\
169 	 sethi		%uhi(_PAGE_PMD_HUGE), REG2;	\
170 	sllx		REG2, 32, REG2;			\
171 	andcc		REG1, REG2, %g0;		\
172 	be,pt		%xcc, 700f;			\
173 	 sethi		%hi(4 * 1024 * 1024), REG2;	\
174 	brgez,pn	REG1, FAIL_LABEL;		\
175 	 andn		REG1, REG2, REG1;		\
176 	and		VADDR, REG2, REG2;		\
177 	brlz,pt		REG1, PTE_LABEL;		\
178 	 or		REG1, REG2, REG1;		\
179 700:
180 #else
181 #define USER_PGTABLE_CHECK_PMD_HUGE(VADDR, REG1, REG2, FAIL_LABEL, PTE_LABEL) \
182 	brz,pn		REG1, FAIL_LABEL; \
183 	 nop;
184 #endif
185 
186 	/* Do a user page table walk in MMU globals.  Leaves final,
187 	 * valid, PTE value in REG1.  Jumps to FAIL_LABEL on early
188 	 * page table walk termination or if the PTE is not valid.
189 	 *
190 	 * Physical base of page tables is in PHYS_PGD which will not
191 	 * be modified.
192 	 *
193 	 * VADDR will not be clobbered, but REG1 and REG2 will.
194 	 */
195 #define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL)	\
196 	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
197 	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
198 	andn		REG2, 0x7, REG2; \
199 	ldxa		[PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \
200 	brz,pn		REG1, FAIL_LABEL; \
201 	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
202 	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
203 	andn		REG2, 0x7, REG2; \
204 	ldxa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
205 	USER_PGTABLE_CHECK_PMD_HUGE(VADDR, REG1, REG2, FAIL_LABEL, 800f) \
206 	sllx		VADDR, 64 - PMD_SHIFT, REG2; \
207 	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
208 	andn		REG2, 0x7, REG2; \
209 	add		REG1, REG2, REG1; \
210 	ldxa		[REG1] ASI_PHYS_USE_EC, REG1; \
211 	brgez,pn	REG1, FAIL_LABEL; \
212 	 nop; \
213 800:
214 
215 /* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0.
216  * If no entry is found, FAIL_LABEL will be branched to.  On success
217  * the resulting PTE value will be left in REG1.  VADDR is preserved
218  * by this routine.
219  */
220 #define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \
221 	sethi		%hi(prom_trans), REG1; \
222 	or		REG1, %lo(prom_trans), REG1; \
223 97:	ldx		[REG1 + 0x00], REG2; \
224 	brz,pn		REG2, FAIL_LABEL; \
225 	 nop; \
226 	ldx		[REG1 + 0x08], REG3; \
227 	add		REG2, REG3, REG3; \
228 	cmp		REG2, VADDR; \
229 	bgu,pt		%xcc, 98f; \
230 	 cmp		VADDR, REG3; \
231 	bgeu,pt		%xcc, 98f; \
232 	 ldx		[REG1 + 0x10], REG3; \
233 	sub		VADDR, REG2, REG2; \
234 	ba,pt		%xcc, 99f; \
235 	 add		REG3, REG2, REG1; \
236 98:	ba,pt		%xcc, 97b; \
237 	 add		REG1, (3 * 8), REG1; \
238 99:
239 
240 	/* We use a 32K TSB for the whole kernel, this allows to
241 	 * handle about 16MB of modules and vmalloc mappings without
242 	 * incurring many hash conflicts.
243 	 */
244 #define KERNEL_TSB_SIZE_BYTES	(32 * 1024)
245 #define KERNEL_TSB_NENTRIES	\
246 	(KERNEL_TSB_SIZE_BYTES / 16)
247 #define KERNEL_TSB4M_NENTRIES	4096
248 
249 #define KTSB_PHYS_SHIFT		15
250 
251 	/* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL
252 	 * on TSB hit.  REG1, REG2, REG3, and REG4 are used as temporaries
253 	 * and the found TTE will be left in REG1.  REG3 and REG4 must
254 	 * be an even/odd pair of registers.
255 	 *
256 	 * VADDR and TAG will be preserved and not clobbered by this macro.
257 	 */
258 #define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
259 661:	sethi		%hi(swapper_tsb), REG1;			\
260 	or		REG1, %lo(swapper_tsb), REG1; \
261 	.section	.swapper_tsb_phys_patch, "ax"; \
262 	.word		661b; \
263 	.previous; \
264 661:	nop; \
265 	.section	.tsb_ldquad_phys_patch, "ax"; \
266 	.word		661b; \
267 	sllx		REG1, KTSB_PHYS_SHIFT, REG1; \
268 	sllx		REG1, KTSB_PHYS_SHIFT, REG1; \
269 	.previous; \
270 	srlx		VADDR, PAGE_SHIFT, REG2; \
271 	and		REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \
272 	sllx		REG2, 4, REG2; \
273 	add		REG1, REG2, REG2; \
274 	TSB_LOAD_QUAD(REG2, REG3); \
275 	cmp		REG3, TAG; \
276 	be,a,pt		%xcc, OK_LABEL; \
277 	 mov		REG4, REG1;
278 
279 #ifndef CONFIG_DEBUG_PAGEALLOC
280 	/* This version uses a trick, the TAG is already (VADDR >> 22) so
281 	 * we can make use of that for the index computation.
282 	 */
283 #define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
284 661:	sethi		%hi(swapper_4m_tsb), REG1;	     \
285 	or		REG1, %lo(swapper_4m_tsb), REG1; \
286 	.section	.swapper_4m_tsb_phys_patch, "ax"; \
287 	.word		661b; \
288 	.previous; \
289 661:	nop; \
290 	.section	.tsb_ldquad_phys_patch, "ax"; \
291 	.word		661b; \
292 	sllx		REG1, KTSB_PHYS_SHIFT, REG1; \
293 	sllx		REG1, KTSB_PHYS_SHIFT, REG1; \
294 	.previous; \
295 	and		TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \
296 	sllx		REG2, 4, REG2; \
297 	add		REG1, REG2, REG2; \
298 	TSB_LOAD_QUAD(REG2, REG3); \
299 	cmp		REG3, TAG; \
300 	be,a,pt		%xcc, OK_LABEL; \
301 	 mov		REG4, REG1;
302 #endif
303 
304 #endif /* !(_SPARC64_TSB_H) */
305