1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * ross.h: Ross module specific definitions and defines. 4 * 5 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) 6 */ 7 8 #ifndef _SPARC_ROSS_H 9 #define _SPARC_ROSS_H 10 11 #include <asm/asi.h> 12 #include <asm/page.h> 13 14 /* Ross made Hypersparcs have a %psr 'impl' field of '0001'. The 'vers' 15 * field has '1111'. 16 */ 17 18 /* The MMU control register fields on the HyperSparc. 19 * 20 * ----------------------------------------------------------------- 21 * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME| 22 * ----------------------------------------------------------------- 23 * 31 24 23-22 21 20 19 18-15 14 13 12 11 10 9 8 7-2 1 0 24 * 25 * Phew, lots of fields there ;-) 26 * 27 * CWR: Cache Wrapping Enabled, if one cache wrapping is on. 28 * SE: Snoop Enable, turns on bus snooping for cache activity if one. 29 * WBE: Write Buffer Enable, one turns it on. 30 * MID: The ModuleID of the chip for MBus transactions. 31 * BM: Boot-Mode. One indicates the MMU is in boot mode. 32 * C: Indicates whether accesses are cachable while the MMU is 33 * disabled. 34 * CS: Cache Size -- 0 = 128k, 1 = 256k 35 * MR: Memory Reflection, one indicates that the memory bus connected 36 * to the MBus supports memory reflection. 37 * CM: Cache Mode -- 0 = write-through, 1 = copy-back 38 * CE: Cache Enable -- 0 = no caching, 1 = cache is on 39 * NF: No Fault -- 0 = faults trap the CPU from supervisor mode 40 * 1 = faults from supervisor mode do not generate traps 41 * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on 42 */ 43 44 #define HYPERSPARC_CWENABLE 0x00200000 45 #define HYPERSPARC_SBENABLE 0x00100000 46 #define HYPERSPARC_WBENABLE 0x00080000 47 #define HYPERSPARC_MIDMASK 0x00078000 48 #define HYPERSPARC_BMODE 0x00004000 49 #define HYPERSPARC_ACENABLE 0x00002000 50 #define HYPERSPARC_CSIZE 0x00001000 51 #define HYPERSPARC_MRFLCT 0x00000800 52 #define HYPERSPARC_CMODE 0x00000400 53 #define HYPERSPARC_CENABLE 0x00000100 54 #define HYPERSPARC_NFAULT 0x00000002 55 #define HYPERSPARC_MENABLE 0x00000001 56 57 58 /* The ICCR instruction cache register on the HyperSparc. 59 * 60 * ----------------------------------------------- 61 * | | FTD | ICE | 62 * ----------------------------------------------- 63 * 31 1 0 64 * 65 * This register is accessed using the V8 'wrasr' and 'rdasr' 66 * opcodes, since not all assemblers understand them and those 67 * that do use different semantics I will just hard code the 68 * instruction with a '.word' statement. 69 * 70 * FTD: If set to one flush instructions executed during an 71 * instruction cache hit occurs, the corresponding line 72 * for said cache-hit is invalidated. If FTD is zero, 73 * an unimplemented 'flush' trap will occur when any 74 * flush is executed by the processor. 75 * 76 * ICE: If set to one, the instruction cache is enabled. If 77 * zero, the cache will not be used for instruction fetches. 78 * 79 * All other bits are read as zeros, and writes to them have no 80 * effect. 81 * 82 * Wheee, not many assemblers understand the %iccr register nor 83 * the generic asr r/w instructions. 84 * 85 * 1000 0011 0100 0111 1100 0000 0000 0000 ! rd %iccr, %g1 86 * 87 * 0x 8 3 4 7 c 0 0 0 ! 0x8347c000 88 * 89 * 1011 1111 1000 0000 0110 0000 0000 0000 ! wr %g1, 0x0, %iccr 90 * 91 * 0x b f 8 0 6 0 0 0 ! 0xbf806000 92 * 93 */ 94 95 #define HYPERSPARC_ICCR_FTD 0x00000002 96 #define HYPERSPARC_ICCR_ICE 0x00000001 97 98 #ifndef __ASSEMBLY__ 99 100 static inline unsigned int get_ross_icr(void) 101 { 102 unsigned int icreg; 103 104 __asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */ 105 "mov %%g1, %0\n\t" 106 : "=r" (icreg) 107 : /* no inputs */ 108 : "g1", "memory"); 109 110 return icreg; 111 } 112 113 static inline void put_ross_icr(unsigned int icreg) 114 { 115 __asm__ __volatile__("or %%g0, %0, %%g1\n\t" 116 ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */ 117 "nop\n\t" 118 "nop\n\t" 119 "nop\n\t" 120 : /* no outputs */ 121 : "r" (icreg) 122 : "g1", "memory"); 123 124 return; 125 } 126 127 /* HyperSparc specific cache flushing. */ 128 129 /* This is for the on-chip instruction cache. */ 130 static inline void hyper_flush_whole_icache(void) 131 { 132 __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" 133 : /* no outputs */ 134 : "i" (ASI_M_FLUSH_IWHOLE) 135 : "memory"); 136 return; 137 } 138 139 extern int vac_cache_size; 140 extern int vac_line_size; 141 142 static inline void hyper_clear_all_tags(void) 143 { 144 unsigned long addr; 145 146 for(addr = 0; addr < vac_cache_size; addr += vac_line_size) 147 __asm__ __volatile__("sta %%g0, [%0] %1\n\t" 148 : /* no outputs */ 149 : "r" (addr), "i" (ASI_M_DATAC_TAG) 150 : "memory"); 151 } 152 153 static inline void hyper_flush_unconditional_combined(void) 154 { 155 unsigned long addr; 156 157 for (addr = 0; addr < vac_cache_size; addr += vac_line_size) 158 __asm__ __volatile__("sta %%g0, [%0] %1\n\t" 159 : /* no outputs */ 160 : "r" (addr), "i" (ASI_M_FLUSH_CTX) 161 : "memory"); 162 } 163 164 static inline void hyper_flush_cache_user(void) 165 { 166 unsigned long addr; 167 168 for (addr = 0; addr < vac_cache_size; addr += vac_line_size) 169 __asm__ __volatile__("sta %%g0, [%0] %1\n\t" 170 : /* no outputs */ 171 : "r" (addr), "i" (ASI_M_FLUSH_USER) 172 : "memory"); 173 } 174 175 static inline void hyper_flush_cache_page(unsigned long page) 176 { 177 unsigned long end; 178 179 page &= PAGE_MASK; 180 end = page + PAGE_SIZE; 181 while (page < end) { 182 __asm__ __volatile__("sta %%g0, [%0] %1\n\t" 183 : /* no outputs */ 184 : "r" (page), "i" (ASI_M_FLUSH_PAGE) 185 : "memory"); 186 page += vac_line_size; 187 } 188 } 189 190 #endif /* !(__ASSEMBLY__) */ 191 192 #endif /* !(_SPARC_ROSS_H) */ 193