1 /* ns87303.h: Configuration Register Description for the 2 * National Semiconductor PC87303 (SuperIO). 3 * 4 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) 5 */ 6 7 #ifndef _SPARC_NS87303_H 8 #define _SPARC_NS87303_H 1 9 10 /* 11 * Control Register Index Values 12 */ 13 #define FER 0x00 14 #define FAR 0x01 15 #define PTR 0x02 16 #define FCR 0x03 17 #define PCR 0x04 18 #define KRR 0x05 19 #define PMC 0x06 20 #define TUP 0x07 21 #define SID 0x08 22 #define ASC 0x09 23 #define CS0CF0 0x0a 24 #define CS0CF1 0x0b 25 #define CS1CF0 0x0c 26 #define CS1CF1 0x0d 27 28 /* Function Enable Register (FER) bits */ 29 #define FER_EDM 0x10 /* Encoded Drive and Motor pin information */ 30 31 /* Function Address Register (FAR) bits */ 32 #define FAR_LPT_MASK 0x03 33 #define FAR_LPTB 0x00 34 #define FAR_LPTA 0x01 35 #define FAR_LPTC 0x02 36 37 /* Power and Test Register (PTR) bits */ 38 #define PTR_LPTB_IRQ7 0x08 39 #define PTR_LEVEL_IRQ 0x80 /* When not ECP/EPP: Use level IRQ */ 40 #define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controls direction */ 41 /* of the parallel port */ 42 43 /* Function Control Register (FCR) bits */ 44 #define FCR_LDE 0x10 /* Logical Drive Exchange */ 45 #define FCR_ZWS_ENA 0x20 /* Enable short host read/write in ECP/EPP */ 46 47 /* Printer Control Register (PCR) bits */ 48 #define PCR_EPP_ENABLE 0x01 49 #define PCR_EPP_IEEE 0x02 /* Enable EPP Version 1.9 (IEEE 1284) */ 50 #define PCR_ECP_ENABLE 0x04 51 #define PCR_ECP_CLK_ENA 0x08 /* If 0 ECP Clock is stopped on Power down */ 52 #define PCR_IRQ_POLAR 0x20 /* If 0 IRQ is level high or negative pulse, */ 53 /* if 1 polarity is inverted */ 54 #define PCR_IRQ_ODRAIN 0x40 /* If 1, IRQ is open drain */ 55 56 /* Tape UARTs and Parallel Port Config Register (TUP) bits */ 57 #define TUP_EPP_TIMO 0x02 /* Enable EPP timeout IRQ */ 58 59 /* Advanced SuperIO Config Register (ASC) bits */ 60 #define ASC_LPT_IRQ7 0x01 /* Always use IRQ7 for LPT */ 61 #define ASC_DRV2_SEL 0x02 /* Logical Drive Exchange controlled by TDR */ 62 63 #define FER_RESERVED 0x00 64 #define FAR_RESERVED 0x00 65 #define PTR_RESERVED 0x73 66 #define FCR_RESERVED 0xc4 67 #define PCR_RESERVED 0x10 68 #define KRR_RESERVED 0x00 69 #define PMC_RESERVED 0x98 70 #define TUP_RESERVED 0xfb 71 #define SIP_RESERVED 0x00 72 #define ASC_RESERVED 0x18 73 #define CS0CF0_RESERVED 0x00 74 #define CS0CF1_RESERVED 0x08 75 #define CS1CF0_RESERVED 0x00 76 #define CS1CF1_RESERVED 0x08 77 78 #ifdef __KERNEL__ 79 80 #include <linux/spinlock.h> 81 82 #include <asm/system.h> 83 #include <asm/io.h> 84 85 extern spinlock_t ns87303_lock; 86 87 static inline int ns87303_modify(unsigned long port, unsigned int index, 88 unsigned char clr, unsigned char set) 89 { 90 static unsigned char reserved[] = { 91 FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED, 92 PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED, 93 SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED, 94 CS1CF0_RESERVED, CS1CF1_RESERVED 95 }; 96 unsigned long flags; 97 unsigned char value; 98 99 if (index > 0x0d) 100 return -EINVAL; 101 102 spin_lock_irqsave(&ns87303_lock, flags); 103 104 outb(index, port); 105 value = inb(port + 1); 106 value &= ~(reserved[index] | clr); 107 value |= set; 108 outb(value, port + 1); 109 outb(value, port + 1); 110 111 spin_unlock_irqrestore(&ns87303_lock, flags); 112 113 return 0; 114 } 115 116 #endif /* __KERNEL__ */ 117 118 #endif /* !(_SPARC_NS87303_H) */ 119