xref: /openbmc/linux/arch/sh/lib/mcount.S (revision e8e0929d)
1/*
2 * arch/sh/lib/mcount.S
3 *
4 *  Copyright (C) 2008, 2009  Paul Mundt
5 *  Copyright (C) 2008, 2009  Matt Fleming
6 *
7 * This file is subject to the terms and conditions of the GNU General Public
8 * License.  See the file "COPYING" in the main directory of this archive
9 * for more details.
10 */
11#include <asm/ftrace.h>
12#include <asm/thread_info.h>
13#include <asm/asm-offsets.h>
14
15#define MCOUNT_ENTER()		\
16	mov.l	r4, @-r15;	\
17	mov.l	r5, @-r15;	\
18	mov.l	r6, @-r15;	\
19	mov.l	r7, @-r15;	\
20	sts.l	pr, @-r15;	\
21				\
22	mov.l	@(20,r15),r4;	\
23	sts	pr, r5
24
25#define MCOUNT_LEAVE()		\
26	lds.l	@r15+, pr;	\
27	mov.l	@r15+, r7;	\
28	mov.l	@r15+, r6;	\
29	mov.l	@r15+, r5;	\
30	rts;			\
31	 mov.l	@r15+, r4
32
33#ifdef CONFIG_STACK_DEBUG
34/*
35 * Perform diagnostic checks on the state of the kernel stack.
36 *
37 * Check for stack overflow. If there is less than 1KB free
38 * then it has overflowed.
39 *
40 * Make sure the stack pointer contains a valid address. Valid
41 * addresses for kernel stacks are anywhere after the bss
42 * (after _ebss) and anywhere in init_thread_union (init_stack).
43 */
44#define STACK_CHECK()					\
45	mov	#(THREAD_SIZE >> 10), r0;		\
46	shll8	r0;					\
47	shll2	r0;					\
48							\
49	/* r1 = sp & (THREAD_SIZE - 1) */		\
50	mov	#-1, r1;				\
51	add	r0, r1;					\
52	and	r15, r1;				\
53							\
54	mov	#TI_SIZE, r3;				\
55	mov	#(STACK_WARN >> 8), r2;			\
56	shll8	r2;					\
57	add	r3, r2;					\
58							\
59	/* Is the stack overflowing? */			\
60	cmp/hi	r2, r1;					\
61	bf	stack_panic;				\
62							\
63	/* If sp > _ebss then we're OK. */		\
64	mov.l	.L_ebss, r1;				\
65	cmp/hi	r1, r15;				\
66	bt	1f;					\
67							\
68	/* If sp < init_stack, we're not OK. */		\
69	mov.l	.L_init_thread_union, r1;		\
70	cmp/hs	r1, r15;				\
71	bf	stack_panic;				\
72							\
73	/* If sp > init_stack && sp < _ebss, not OK. */	\
74	add	r0, r1;					\
75	cmp/hs	r1, r15;				\
76	bt	stack_panic;				\
771:
78#else
79#define STACK_CHECK()
80#endif /* CONFIG_STACK_DEBUG */
81
82	.align 2
83	.globl	_mcount
84	.type	_mcount,@function
85	.globl	mcount
86	.type	mcount,@function
87_mcount:
88mcount:
89	STACK_CHECK()
90
91#ifndef CONFIG_FUNCTION_TRACER
92	rts
93	 nop
94#else
95#ifndef CONFIG_DYNAMIC_FTRACE
96	mov.l	.Lfunction_trace_stop, r0
97	mov.l	@r0, r0
98	tst	r0, r0
99	bf	ftrace_stub
100#endif
101
102	MCOUNT_ENTER()
103
104#ifdef CONFIG_DYNAMIC_FTRACE
105	.globl	mcount_call
106mcount_call:
107	mov.l	.Lftrace_stub, r6
108#else
109	mov.l	.Lftrace_trace_function, r6
110	mov.l	ftrace_stub, r7
111	cmp/eq	r6, r7
112	bt	skip_trace
113	mov.l	@r6, r6
114#endif
115
116	jsr	@r6
117	 nop
118
119#ifdef CONFIG_FUNCTION_GRAPH_TRACER
120	mov.l   .Lftrace_graph_return, r6
121	mov.l   .Lftrace_stub, r7
122	cmp/eq  r6, r7
123	bt      1f
124
125	mov.l   .Lftrace_graph_caller, r0
126	jmp     @r0
127	 nop
128
1291:
130	mov.l	.Lftrace_graph_entry, r6
131	mov.l	.Lftrace_graph_entry_stub, r7
132	cmp/eq	r6, r7
133	bt	skip_trace
134
135	mov.l   .Lftrace_graph_caller, r0
136	jmp	@r0
137	 nop
138
139	.align 2
140.Lftrace_graph_return:
141	.long   ftrace_graph_return
142.Lftrace_graph_entry:
143	.long   ftrace_graph_entry
144.Lftrace_graph_entry_stub:
145	.long   ftrace_graph_entry_stub
146.Lftrace_graph_caller:
147	.long   ftrace_graph_caller
148#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
149
150	.globl skip_trace
151skip_trace:
152	MCOUNT_LEAVE()
153
154	.align 2
155.Lftrace_trace_function:
156	.long   ftrace_trace_function
157
158#ifdef CONFIG_DYNAMIC_FTRACE
159#ifdef CONFIG_FUNCTION_GRAPH_TRACER
160/*
161 * NOTE: Do not move either ftrace_graph_call or ftrace_caller
162 * as this will affect the calculation of GRAPH_INSN_OFFSET.
163 */
164	.globl ftrace_graph_call
165ftrace_graph_call:
166	mov.l	.Lskip_trace, r0
167	jmp	@r0
168	 nop
169
170	.align 2
171.Lskip_trace:
172	.long	skip_trace
173#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
174
175	.globl ftrace_caller
176ftrace_caller:
177	mov.l	.Lfunction_trace_stop, r0
178	mov.l	@r0, r0
179	tst	r0, r0
180	bf	ftrace_stub
181
182	MCOUNT_ENTER()
183
184	.globl ftrace_call
185ftrace_call:
186	mov.l	.Lftrace_stub, r6
187	jsr	@r6
188	 nop
189
190#ifdef CONFIG_FUNCTION_GRAPH_TRACER
191	bra	ftrace_graph_call
192	 nop
193#else
194	MCOUNT_LEAVE()
195#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
196#endif /* CONFIG_DYNAMIC_FTRACE */
197
198	.align 2
199.Lfunction_trace_stop:
200	.long	function_trace_stop
201
202/*
203 * NOTE: From here on the locations of the .Lftrace_stub label and
204 * ftrace_stub itself are fixed. Adding additional data here will skew
205 * the displacement for the memory table and break the block replacement.
206 * Place new labels either after the ftrace_stub body, or before
207 * ftrace_caller. You have been warned.
208 */
209.Lftrace_stub:
210	.long	ftrace_stub
211
212	.globl	ftrace_stub
213ftrace_stub:
214	rts
215	 nop
216
217#ifdef CONFIG_FUNCTION_GRAPH_TRACER
218	.globl	ftrace_graph_caller
219ftrace_graph_caller:
220	mov.l	2f, r0
221	mov.l	@r0, r0
222	tst	r0, r0
223	bt	1f
224
225	mov.l	3f, r1
226	jmp	@r1
227	 nop
2281:
229	/*
230	 * MCOUNT_ENTER() pushed 5 registers onto the stack, so
231	 * the stack address containing our return address is
232	 * r15 + 20.
233	 */
234	mov	#20, r0
235	add	r15, r0
236	mov	r0, r4
237
238	mov.l	.Lprepare_ftrace_return, r0
239	jsr	@r0
240	 nop
241
242	MCOUNT_LEAVE()
243
244	.align 2
2452:	.long	function_trace_stop
2463:	.long	skip_trace
247.Lprepare_ftrace_return:
248	.long	prepare_ftrace_return
249
250	.globl	return_to_handler
251return_to_handler:
252	/*
253	 * Save the return values.
254	 */
255	mov.l	r0, @-r15
256	mov.l	r1, @-r15
257
258	mov	#0, r4
259
260	mov.l	.Lftrace_return_to_handler, r0
261	jsr	@r0
262	 nop
263
264	/*
265	 * The return value from ftrace_return_handler has the real
266	 * address that we should return to.
267	 */
268	lds	r0, pr
269	mov.l	@r15+, r1
270	rts
271	 mov.l	@r15+, r0
272
273
274	.align 2
275.Lftrace_return_to_handler:
276	.long	ftrace_return_to_handler
277#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
278#endif /* CONFIG_FUNCTION_TRACER */
279
280#ifdef CONFIG_STACK_DEBUG
281	.globl	stack_panic
282stack_panic:
283	mov.l	.Ldump_stack, r0
284	jsr	@r0
285	 nop
286
287	mov.l	.Lpanic, r0
288	jsr	@r0
289	 mov.l	.Lpanic_s, r4
290
291	rts
292	 nop
293
294	.align 2
295.L_ebss:
296	.long	_ebss
297.L_init_thread_union:
298	.long	init_thread_union
299.Lpanic:
300	.long	panic
301.Lpanic_s:
302	.long	.Lpanic_str
303.Ldump_stack:
304	.long	dump_stack
305
306	.section	.rodata
307	.align 2
308.Lpanic_str:
309	.string "Stack error"
310#endif /* CONFIG_STACK_DEBUG */
311