xref: /openbmc/linux/arch/sh/include/mach-se/mach/se.h (revision 9ac8d3fb)
1 #ifndef __ASM_SH_HITACHI_SE_H
2 #define __ASM_SH_HITACHI_SE_H
3 
4 /*
5  * linux/include/asm-sh/hitachi_se.h
6  *
7  * Copyright (C) 2000  Kazumoto Kojima
8  *
9  * Hitachi SolutionEngine support
10  */
11 
12 /* Box specific addresses.  */
13 
14 #define PA_ROM		0x00000000	/* EPROM */
15 #define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
16 #define PA_FROM		0x01000000	/* EPROM */
17 #define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
18 #define PA_EXT1		0x04000000
19 #define PA_EXT1_SIZE	0x04000000
20 #define PA_EXT2		0x08000000
21 #define PA_EXT2_SIZE	0x04000000
22 #define PA_SDRAM	0x0c000000
23 #define PA_SDRAM_SIZE	0x04000000
24 
25 #define PA_EXT4		0x12000000
26 #define PA_EXT4_SIZE	0x02000000
27 #define PA_EXT5		0x14000000
28 #define PA_EXT5_SIZE	0x04000000
29 #define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
30 
31 #define PA_83902	0xb0000000	/* DP83902A */
32 #define PA_83902_IF	0xb0040000	/* DP83902A remote io port */
33 #define PA_83902_RST	0xb0080000	/* DP83902A reset port */
34 
35 #define PA_SUPERIO	0xb0400000	/* SMC37C935A super io chip */
36 #define PA_DIPSW0	0xb0800000	/* Dip switch 5,6 */
37 #define PA_DIPSW1	0xb0800002	/* Dip switch 7,8 */
38 #define PA_LED		0xb0c00000	/* LED */
39 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
40 #define PA_BCR		0xb0e00000
41 #else
42 #define PA_BCR		0xb1400000	/* FPGA */
43 #endif
44 
45 #define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
46 #define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
47 #define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
48 #define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
49 #define MRSHPC_OPTION   (PA_MRSHPC + 6)
50 #define MRSHPC_CSR      (PA_MRSHPC + 8)
51 #define MRSHPC_ISR      (PA_MRSHPC + 10)
52 #define MRSHPC_ICR      (PA_MRSHPC + 12)
53 #define MRSHPC_CPWCR    (PA_MRSHPC + 14)
54 #define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
55 #define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
56 #define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
57 #define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
58 #define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
59 #define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
60 #define MRSHPC_CDCR     (PA_MRSHPC + 28)
61 #define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
62 
63 #define BCR_ILCRA	(PA_BCR + 0)
64 #define BCR_ILCRB	(PA_BCR + 2)
65 #define BCR_ILCRC	(PA_BCR + 4)
66 #define BCR_ILCRD	(PA_BCR + 6)
67 #define BCR_ILCRE	(PA_BCR + 8)
68 #define BCR_ILCRF	(PA_BCR + 10)
69 #define BCR_ILCRG	(PA_BCR + 12)
70 
71 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
72 #define IRQ_STNIC	12
73 #define IRQ_CFCARD	14
74 #else
75 #define IRQ_STNIC	10
76 #define IRQ_CFCARD	7
77 #endif
78 
79 /* SH Ether support (SH7710/SH7712) */
80 /* Base address */
81 #define SH_ETH0_BASE 0xA7000000
82 #define SH_ETH1_BASE 0xA7000400
83 /* PHY ID */
84 #if defined(CONFIG_CPU_SUBTYPE_SH7710)
85 # define PHY_ID 0x00
86 #elif defined(CONFIG_CPU_SUBTYPE_SH7712)
87 # define PHY_ID 0x01
88 #endif
89 /* Ether IRQ */
90 #define SH_ETH0_IRQ	80
91 #define SH_ETH1_IRQ	81
92 #define SH_TSU_IRQ	82
93 
94 void init_se_IRQ(void);
95 
96 #define __IO_PREFIX	se
97 #include <asm/io_generic.h>
98 
99 #endif  /* __ASM_SH_HITACHI_SE_H */
100