1 #ifdef __ASSEMBLY__
2 
3 /* EcoVec board specific boot code:
4  * converts the "partner-jet-script.txt" script into assembly
5  * the assembly code is the first code to be executed in the romImage
6  */
7 
8 #include <asm/romimage-macros.h>
9 #include <mach/partner-jet-setup.txt>
10 
11 	/* execute icbi after enabling cache */
12 	mov.l	1f, r0
13 	icbi	@r0
14 
15 	/* jump to cached area */
16 	mova	2f, r0
17 	jmp	@r0
18 	nop
19 
20 	.align 2
21 1 :	.long 0xa8000000
22 2 :
23 
24 #else /* __ASSEMBLY__ */
25 
26 /* Ecovec board specific information:
27  *
28  * Set the following to enable MMCIF boot from the MMC card in CN12:
29  *
30  * DS1.5 = OFF (SH BOOT pin set to L)
31  * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
32  * DS2.7 = ON  (Select MMCIF on CN12 instead of SDHI1)
33  *
34  */
35 #define HIZCRA		0xa4050158
36 #define PGDR		0xa405012c
37 
38 static inline void mmcif_update_progress(int nr)
39 {
40 	/* disable Hi-Z for LED pins */
41 	__raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
42 
43 	/* update progress on LED4, LED5, LED6 and LED7 */
44 	__raw_writeb(1 << (nr - 1), PGDR);
45 }
46 
47 #endif /* __ASSEMBLY__ */
48