1 /*
2  * linux/include/asm-sh/microdev.h
3  *
4  * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
5  *
6  * Definitions for the SuperH SH4-202 MicroDev board.
7  *
8  * May be copied or modified under the terms of the GNU General Public
9  * License.  See linux/COPYING for more information.
10  */
11 #ifndef __ASM_SH_MICRODEV_H
12 #define __ASM_SH_MICRODEV_H
13 
14 extern void init_microdev_irq(void);
15 extern void microdev_print_fpga_intc_status(void);
16 
17 /*
18  * The following are useful macros for manipulating the interrupt
19  * controller (INTC) on the CPU-board FPGA.  should be noted that there
20  * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
21  * these are two different things, both of which need to be prorammed to
22  * correctly route - unfortunately, they have the same name and
23  * abbreviations!
24  */
25 #define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
26 #define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
27 #define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
28 #define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interrupt mask to enable/disable INTC in CPU-board FPGA */
29 #define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
30 #define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
31 #define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
32 #define	MICRODEV_FPGA_INTSRC_REG	(MICRODEV_FPGA_INTC_BASE+0x30ul)	/* Interrupt Source Register on INTC on CPU-board FPGA */
33 #define	MICRODEV_FPGA_INTREQ_REG	(MICRODEV_FPGA_INTC_BASE+0x38ul)	/* Interrupt Request Register on INTC on CPU-board FPGA */
34 
35 
36 /*
37  * The following are the IRQ numbers for the Linux Kernel for external
38  * interrupts.  i.e. the numbers seen by 'cat /proc/interrupt'.
39  */
40 #define MICRODEV_LINUX_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
41 #define MICRODEV_LINUX_IRQ_SERIAL1	 2	/* SuperIO Serial #1 */
42 #define MICRODEV_LINUX_IRQ_ETHERNET	 3	/* on-board Ethnernet */
43 #define MICRODEV_LINUX_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
44 #define MICRODEV_LINUX_IRQ_USB_HC	 7	/* on-board USB HC */
45 #define MICRODEV_LINUX_IRQ_MOUSE	12	/* SuperIO PS/2 Mouse */
46 #define MICRODEV_LINUX_IRQ_IDE2		13	/* SuperIO IDE #2 */
47 #define MICRODEV_LINUX_IRQ_IDE1		14	/* SuperIO IDE #1 */
48 
49 /*
50  * The following are the IRQ numbers for the INTC on the FPGA for
51  * external interrupts.  i.e. the bits in the INTC registers in the
52  * FPGA.
53  */
54 #define MICRODEV_FPGA_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
55 #define MICRODEV_FPGA_IRQ_SERIAL1	 3	/* SuperIO Serial #1 */
56 #define MICRODEV_FPGA_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
57 #define MICRODEV_FPGA_IRQ_MOUSE		12	/* SuperIO PS/2 Mouse */
58 #define MICRODEV_FPGA_IRQ_IDE1		14	/* SuperIO IDE #1 */
59 #define MICRODEV_FPGA_IRQ_IDE2		15	/* SuperIO IDE #2 */
60 #define MICRODEV_FPGA_IRQ_USB_HC	16	/* on-board USB HC */
61 #define MICRODEV_FPGA_IRQ_ETHERNET	18	/* on-board Ethnernet */
62 
63 #define MICRODEV_IRQ_PCI_INTA		 8
64 #define MICRODEV_IRQ_PCI_INTB		 9
65 #define MICRODEV_IRQ_PCI_INTC		10
66 #define MICRODEV_IRQ_PCI_INTD		11
67 
68 #define __IO_PREFIX microdev
69 #include <asm/io_generic.h>
70 
71 #if defined(CONFIG_PCI)
72 unsigned char  microdev_pci_inb(unsigned long port);
73 unsigned short microdev_pci_inw(unsigned long port);
74 unsigned long  microdev_pci_inl(unsigned long port);
75 void           microdev_pci_outb(unsigned char  data, unsigned long port);
76 void           microdev_pci_outw(unsigned short data, unsigned long port);
77 void           microdev_pci_outl(unsigned long  data, unsigned long port);
78 #endif
79 
80 #endif /* __ASM_SH_MICRODEV_H */
81