xref: /openbmc/linux/arch/sh/drivers/pci/pci-sh4.h (revision b6dcefde)
1 #ifndef __PCI_SH4_H
2 #define __PCI_SH4_H
3 
4 #if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
5     defined(CONFIG_CPU_SUBTYPE_SH7785) || \
6     defined(CONFIG_CPU_SUBTYPE_SH7763)
7 #include "pci-sh7780.h"
8 #else
9 #include "pci-sh7751.h"
10 #endif
11 
12 #include <asm/io.h>
13 
14 /* startup values */
15 #define PCI_PROBE_BIOS		1
16 #define PCI_PROBE_CONF1		2
17 #define PCI_PROBE_CONF2		4
18 #define PCI_NO_CHECKS		0x400
19 #define PCI_ASSIGN_ROMS		0x1000
20 #define PCI_BIOS_IRQ_SCAN	0x2000
21 
22 #define SH4_PCICR		0x100		/* PCI Control Register */
23   #define SH4_PCICR_PREFIX	  0xA5000000	/* CR prefix for write */
24   #define SH4_PCICR_FTO		  0x00000400	/* TRDY/IRDY Enable */
25   #define SH4_PCICR_TRSB	  0x00000200	/* Target Read Single */
26   #define SH4_PCICR_BSWP	  0x00000100	/* Target Byte Swap */
27   #define SH4_PCICR_PLUP	  0x00000080	/* Enable PCI Pullup */
28   #define SH4_PCICR_ARBM	  0x00000040	/* PCI Arbitration Mode */
29   #define SH4_PCICR_MD		  0x00000030	/* MD9 and MD10 status */
30   #define SH4_PCICR_SERR	  0x00000008	/* SERR output assert */
31   #define SH4_PCICR_INTA	  0x00000004	/* INTA output assert */
32   #define SH4_PCICR_PRST	  0x00000002	/* PCI Reset Assert */
33   #define SH4_PCICR_CFIN	  0x00000001	/* Central Fun. Init Done */
34 #define SH4_PCILSR0		0x104		/* PCI Local Space Register0 */
35 #define SH4_PCILSR1		0x108		/* PCI Local Space Register1 */
36 #define SH4_PCILAR0		0x10C		/* PCI Local Addr Register1 */
37 #define SH4_PCILAR1		0x110		/* PCI Local Addr Register1 */
38 #define SH4_PCIINT		0x114		/* PCI Interrupt Register */
39   #define SH4_PCIINT_MLCK	  0x00008000	/* Master Lock Error */
40   #define SH4_PCIINT_TABT	  0x00004000	/* Target Abort Error */
41   #define SH4_PCIINT_TRET	  0x00000200	/* Target Retry Error */
42   #define SH4_PCIINT_MFDE	  0x00000100	/* Master Func. Disable Error */
43   #define SH4_PCIINT_PRTY	  0x00000080	/* Address Parity Error */
44   #define SH4_PCIINT_SERR	  0x00000040	/* SERR Detection Error */
45   #define SH4_PCIINT_TWDP	  0x00000020	/* Tgt. Write Parity Error */
46   #define SH4_PCIINT_TRDP	  0x00000010	/* Tgt. Read Parity Err Det. */
47   #define SH4_PCIINT_MTABT	  0x00000008	/* Master-Tgt. Abort Error */
48   #define SH4_PCIINT_MMABT	  0x00000004	/* Master-Master Abort Error */
49   #define SH4_PCIINT_MWPD	  0x00000002	/* Master Write PERR Detect */
50   #define SH4_PCIINT_MRPD	  0x00000001	/* Master Read PERR Detect */
51 #define SH4_PCIINTM		0x118		/* PCI Interrupt Mask */
52 #define SH4_PCIALR		0x11C		/* Error Address Register */
53 #define SH4_PCICLR		0x120		/* Error Command/Data */
54   #define SH4_PCICLR_MPIO	  0x80000000
55   #define SH4_PCICLR_MDMA0	  0x40000000	/* DMA0 Transfer Error */
56   #define SH4_PCICLR_MDMA1	  0x20000000	/* DMA1 Transfer Error */
57   #define SH4_PCICLR_MDMA2	  0x10000000	/* DMA2 Transfer Error */
58   #define SH4_PCICLR_MDMA3	  0x08000000	/* DMA3 Transfer Error */
59   #define SH4_PCICLR_TGT	  0x04000000	/* Target Transfer Error */
60   #define SH4_PCICLR_CMDL	  0x0000000F	/* PCI Command at Error */
61 #define SH4_PCIAINT		0x130		/* Arbiter Interrupt Register */
62   #define SH4_PCIAINT_MBKN	  0x00002000	/* Master Broken Interrupt */
63   #define SH4_PCIAINT_TBTO	  0x00001000	/* Target Bus Time Out */
64   #define SH4_PCIAINT_MBTO	  0x00001000	/* Master Bus Time Out */
65   #define SH4_PCIAINT_TABT	  0x00000008	/* Target Abort */
66   #define SH4_PCIAINT_MABT	  0x00000004	/* Master Abort */
67   #define SH4_PCIAINT_RDPE	  0x00000002	/* Read Data Parity Error */
68   #define SH4_PCIAINT_WDPE	  0x00000001	/* Write Data Parity Error */
69 #define SH4_PCIAINTM            0x134		/* Arbiter Int. Mask Register */
70 #define SH4_PCIBMLR		0x138		/* Error Bus Master Register */
71   #define SH4_PCIBMLR_REQ4	  0x00000010	/* REQ4 bus master at error */
72   #define SH4_PCIBMLR_REQ3	  0x00000008	/* REQ3 bus master at error */
73   #define SH4_PCIBMLR_REQ2	  0x00000004	/* REQ2 bus master at error */
74   #define SH4_PCIBMLR_REQ1	  0x00000002	/* REQ1 bus master at error */
75   #define SH4_PCIBMLR_REQ0	  0x00000001	/* REQ0 bus master at error */
76 #define SH4_PCIDMABT		0x140		/* DMA Transfer Arb. Register */
77   #define SH4_PCIDMABT_RRBN	  0x00000001	/* DMA Arbitor Round-Robin */
78 #define SH4_PCIDPA0		0x180		/* DMA0 Transfer Addr. */
79 #define SH4_PCIDLA0		0x184		/* DMA0 Local Addr. */
80 #define SH4_PCIDTC0		0x188		/* DMA0 Transfer Cnt. */
81 #define SH4_PCIDCR0		0x18C		/* DMA0 Control Register */
82   #define SH4_PCIDCR_ALGN	  0x00000600	/* DMA Alignment Mode */
83   #define SH4_PCIDCR_MAST	  0x00000100	/* DMA Termination Type */
84   #define SH4_PCIDCR_INTM	  0x00000080	/* DMA Interrupt Done Mask*/
85   #define SH4_PCIDCR_INTS	  0x00000040	/* DMA Interrupt Done Status */
86   #define SH4_PCIDCR_LHLD	  0x00000020	/* Local Address Control */
87   #define SH4_PCIDCR_PHLD	  0x00000010	/* PCI Address Control*/
88   #define SH4_PCIDCR_IOSEL	  0x00000008	/* PCI Address Space Type */
89   #define SH4_PCIDCR_DIR	  0x00000004	/* DMA Transfer Direction */
90   #define SH4_PCIDCR_STOP	  0x00000002	/* Force DMA Stop */
91   #define SH4_PCIDCR_STRT	  0x00000001	/* DMA Start */
92 #define SH4_PCIDPA1		0x190		/* DMA1 Transfer Addr. */
93 #define SH4_PCIDLA1		0x194		/* DMA1 Local Addr. */
94 #define SH4_PCIDTC1		0x198		/* DMA1 Transfer Cnt. */
95 #define SH4_PCIDCR1		0x19C		/* DMA1 Control Register */
96 #define SH4_PCIDPA2		0x1A0		/* DMA2 Transfer Addr. */
97 #define SH4_PCIDLA2		0x1A4		/* DMA2 Local Addr. */
98 #define SH4_PCIDTC2		0x1A8		/* DMA2 Transfer Cnt. */
99 #define SH4_PCIDCR2		0x1AC		/* DMA2 Control Register */
100 #define SH4_PCIDPA3		0x1B0		/* DMA3 Transfer Addr. */
101 #define SH4_PCIDLA3		0x1B4		/* DMA3 Local Addr. */
102 #define SH4_PCIDTC3		0x1B8		/* DMA3 Transfer Cnt. */
103 #define SH4_PCIDCR3		0x1BC		/* DMA3 Control Register */
104 #define SH4_PCIPAR		0x1C0		/* PIO Address Register */
105   #define SH4_PCIPAR_CFGEN	  0x80000000	/* Configuration Enable */
106   #define SH4_PCIPAR_BUSNO	  0x00FF0000	/* Config. Bus Number */
107   #define SH4_PCIPAR_DEVNO	  0x0000FF00	/* Config. Device Number */
108   #define SH4_PCIPAR_REGAD	  0x000000FC	/* Register Address Number */
109 #define SH4_PCIMBR		0x1C4		/* Memory Base Address */
110   #define SH4_PCIMBR_MASK	  0xFF000000	/* Memory Space Mask */
111   #define SH4_PCIMBR_LOCK	  0x00000001	/* Lock Memory Space */
112 #define SH4_PCIIOBR		0x1C8		/* I/O Base Address Register */
113   #define SH4_PCIIOBR_MASK	  0xFFFC0000	/* IO Space Mask */
114   #define SH4_PCIIOBR_LOCK	  0x00000001	/* Lock IO Space */
115 #define SH4_PCIPINT		0x1CC		/* Power Mgmnt Int. Register */
116   #define SH4_PCIPINT_D3	  0x00000002	/* D3 Pwr Mgmt. Interrupt */
117   #define SH4_PCIPINT_D0	  0x00000001	/* D0 Pwr Mgmt. Interrupt */
118 #define SH4_PCIPINTM		0x1D0		/* Power Mgmnt Mask Register */
119 #define SH4_PCICLKR		0x1D4		/* Clock Ctrl. Register */
120   #define SH4_PCICLKR_PCSTP	  0x00000002	/* PCI Clock Stop */
121   #define SH4_PCICLKR_BCSTP	  0x00000001	/* BCLK Clock Stop */
122 /* For definitions of BCR, MCR see ... */
123 #define SH4_PCIBCR1		0x1E0		/* Memory BCR1 Register */
124   #define SH4_PCIMBR0		SH4_PCIBCR1
125 #define SH4_PCIBCR2		0x1E4		/* Memory BCR2 Register */
126   #define SH4_PCIMBMR0		SH4_PCIBCR2
127 #define SH4_PCIWCR1		0x1E8		/* Wait Control 1 Register */
128 #define SH4_PCIWCR2		0x1EC		/* Wait Control 2 Register */
129 #define SH4_PCIWCR3		0x1F0		/* Wait Control 3 Register */
130   #define SH4_PCIMBR2		SH4_PCIWCR3
131 #define SH4_PCIMCR		0x1F4		/* Memory Control Register */
132 #define SH4_PCIBCR3		0x1f8		/* Memory BCR3 Register */
133 #define SH4_PCIPCTR             0x200		/* Port Control Register */
134   #define SH4_PCIPCTR_P2EN	  0x000400000	/* Port 2 Enable */
135   #define SH4_PCIPCTR_P1EN	  0x000200000	/* Port 1 Enable */
136   #define SH4_PCIPCTR_P0EN	  0x000100000	/* Port 0 Enable */
137   #define SH4_PCIPCTR_P2UP	  0x000000020	/* Port2 Pull Up Enable */
138   #define SH4_PCIPCTR_P2IO	  0x000000010	/* Port2 Output Enable */
139   #define SH4_PCIPCTR_P1UP	  0x000000008	/* Port1 Pull Up Enable */
140   #define SH4_PCIPCTR_P1IO	  0x000000004	/* Port1 Output Enable */
141   #define SH4_PCIPCTR_P0UP	  0x000000002	/* Port0 Pull Up Enable */
142   #define SH4_PCIPCTR_P0IO	  0x000000001	/* Port0 Output Enable */
143 #define SH4_PCIPDTR		0x204		/* Port Data Register */
144   #define SH4_PCIPDTR_PB5	  0x000000020	/* Port 5 Enable */
145   #define SH4_PCIPDTR_PB4	  0x000000010	/* Port 4 Enable */
146   #define SH4_PCIPDTR_PB3	  0x000000008	/* Port 3 Enable */
147   #define SH4_PCIPDTR_PB2	  0x000000004	/* Port 2 Enable */
148   #define SH4_PCIPDTR_PB1	  0x000000002	/* Port 1 Enable */
149   #define SH4_PCIPDTR_PB0	  0x000000001	/* Port 0 Enable */
150 #define SH4_PCIPDR		0x220		/* Port IO Data Register */
151 
152 /* arch/sh/kernel/drivers/pci/ops-sh4.c */
153 extern struct pci_ops sh4_pci_ops;
154 int sh4_pci_check_direct(struct pci_channel *chan);
155 int pci_fixup_pcic(struct pci_channel *chan);
156 
157 struct sh4_pci_address_space {
158 	unsigned long base;
159 	unsigned long size;
160 };
161 
162 struct sh4_pci_address_map {
163 	struct sh4_pci_address_space window0;
164 	struct sh4_pci_address_space window1;
165 };
166 
167 static inline void pci_write_reg(struct pci_channel *chan,
168 				 unsigned long val, unsigned long reg)
169 {
170 	ctrl_outl(val, chan->reg_base + reg);
171 }
172 
173 static inline unsigned long pci_read_reg(struct pci_channel *chan,
174 					 unsigned long reg)
175 {
176 	return ctrl_inl(chan->reg_base + reg);
177 }
178 
179 #endif /* __PCI_SH4_H */
180