1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * arch/sh/boards/mach-x3proto/setup.c
4  *
5  * Renesas SH-X3 Prototype Board Support.
6  *
7  * Copyright (C) 2007 - 2010  Paul Mundt
8  */
9 #include <linux/init.h>
10 #include <linux/platform_device.h>
11 #include <linux/kernel.h>
12 #include <linux/io.h>
13 #include <linux/smc91x.h>
14 #include <linux/irq.h>
15 #include <linux/interrupt.h>
16 #include <linux/input.h>
17 #include <linux/usb/r8a66597.h>
18 #include <linux/usb/m66592.h>
19 #include <linux/gpio.h>
20 #include <linux/gpio_keys.h>
21 #include <mach/ilsel.h>
22 #include <mach/hardware.h>
23 #include <asm/smp-ops.h>
24 
25 static struct resource heartbeat_resources[] = {
26 	[0] = {
27 		.start	= 0xb8140020,
28 		.end	= 0xb8140020,
29 		.flags	= IORESOURCE_MEM,
30 	},
31 };
32 
33 static struct platform_device heartbeat_device = {
34 	.name		= "heartbeat",
35 	.id		= -1,
36 	.num_resources	= ARRAY_SIZE(heartbeat_resources),
37 	.resource	= heartbeat_resources,
38 };
39 
40 static struct smc91x_platdata smc91x_info = {
41 	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
42 };
43 
44 static struct resource smc91x_resources[] = {
45 	[0] = {
46 		.start		= 0x18000300,
47 		.end		= 0x18000300 + 0x10 - 1,
48 		.flags		= IORESOURCE_MEM,
49 	},
50 	[1] = {
51 		/* Filled in by ilsel */
52 		.flags		= IORESOURCE_IRQ,
53 	},
54 };
55 
56 static struct platform_device smc91x_device = {
57 	.name		= "smc91x",
58 	.id		= -1,
59 	.resource	= smc91x_resources,
60 	.num_resources	= ARRAY_SIZE(smc91x_resources),
61 	.dev	= {
62 		.platform_data = &smc91x_info,
63 	},
64 };
65 
66 static struct r8a66597_platdata r8a66597_data = {
67 	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
68 	.vif = 1,
69 };
70 
71 static struct resource r8a66597_usb_host_resources[] = {
72 	[0] = {
73 		.start	= 0x18040000,
74 		.end	= 0x18080000 - 1,
75 		.flags	= IORESOURCE_MEM,
76 	},
77 	[1] = {
78 		/* Filled in by ilsel */
79 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
80 	},
81 };
82 
83 static struct platform_device r8a66597_usb_host_device = {
84 	.name		= "r8a66597_hcd",
85 	.id		= -1,
86 	.dev = {
87 		.dma_mask		= NULL,		/* don't use dma */
88 		.coherent_dma_mask	= 0xffffffff,
89 		.platform_data		= &r8a66597_data,
90 	},
91 	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
92 	.resource	= r8a66597_usb_host_resources,
93 };
94 
95 static struct m66592_platdata usbf_platdata = {
96 	.xtal = M66592_PLATDATA_XTAL_24MHZ,
97 	.vif = 1,
98 };
99 
100 static struct resource m66592_usb_peripheral_resources[] = {
101 	[0] = {
102 		.name	= "m66592_udc",
103 		.start	= 0x18080000,
104 		.end	= 0x180c0000 - 1,
105 		.flags	= IORESOURCE_MEM,
106 	},
107 	[1] = {
108 		.name	= "m66592_udc",
109 		/* Filled in by ilsel */
110 		.flags	= IORESOURCE_IRQ,
111 	},
112 };
113 
114 static struct platform_device m66592_usb_peripheral_device = {
115 	.name		= "m66592_udc",
116 	.id		= -1,
117 	.dev = {
118 		.dma_mask		= NULL,		/* don't use dma */
119 		.coherent_dma_mask	= 0xffffffff,
120 		.platform_data		= &usbf_platdata,
121 	},
122 	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
123 	.resource	= m66592_usb_peripheral_resources,
124 };
125 
126 static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = {
127 	{
128 		.desc		= "key44",
129 		.code		= KEY_POWER,
130 		.active_low	= 1,
131 		.wakeup		= 1,
132 	}, {
133 		.desc		= "key43",
134 		.code		= KEY_SUSPEND,
135 		.active_low	= 1,
136 		.wakeup		= 1,
137 	}, {
138 		.desc		= "key42",
139 		.code		= KEY_KATAKANAHIRAGANA,
140 		.active_low	= 1,
141 	}, {
142 		.desc		= "key41",
143 		.code		= KEY_SWITCHVIDEOMODE,
144 		.active_low	= 1,
145 	}, {
146 		.desc		= "key34",
147 		.code		= KEY_F12,
148 		.active_low	= 1,
149 	}, {
150 		.desc		= "key33",
151 		.code		= KEY_F11,
152 		.active_low	= 1,
153 	}, {
154 		.desc		= "key32",
155 		.code		= KEY_F10,
156 		.active_low	= 1,
157 	}, {
158 		.desc		= "key31",
159 		.code		= KEY_F9,
160 		.active_low	= 1,
161 	}, {
162 		.desc		= "key24",
163 		.code		= KEY_F8,
164 		.active_low	= 1,
165 	}, {
166 		.desc		= "key23",
167 		.code		= KEY_F7,
168 		.active_low	= 1,
169 	}, {
170 		.desc		= "key22",
171 		.code		= KEY_F6,
172 		.active_low	= 1,
173 	}, {
174 		.desc		= "key21",
175 		.code		= KEY_F5,
176 		.active_low	= 1,
177 	}, {
178 		.desc		= "key14",
179 		.code		= KEY_F4,
180 		.active_low	= 1,
181 	}, {
182 		.desc		= "key13",
183 		.code		= KEY_F3,
184 		.active_low	= 1,
185 	}, {
186 		.desc		= "key12",
187 		.code		= KEY_F2,
188 		.active_low	= 1,
189 	}, {
190 		.desc		= "key11",
191 		.code		= KEY_F1,
192 		.active_low	= 1,
193 	},
194 };
195 
196 static struct gpio_keys_platform_data baseboard_buttons_data = {
197 	.buttons	= baseboard_buttons,
198 	.nbuttons	= ARRAY_SIZE(baseboard_buttons),
199 };
200 
201 static struct platform_device baseboard_buttons_device = {
202 	.name		= "gpio-keys",
203 	.id		= -1,
204 	.dev		= {
205 		.platform_data	= &baseboard_buttons_data,
206 	},
207 };
208 
209 static struct platform_device *x3proto_devices[] __initdata = {
210 	&heartbeat_device,
211 	&smc91x_device,
212 	&r8a66597_usb_host_device,
213 	&m66592_usb_peripheral_device,
214 	&baseboard_buttons_device,
215 };
216 
217 static void __init x3proto_init_irq(void)
218 {
219 	plat_irq_setup_pins(IRQ_MODE_IRL3210);
220 
221 	/* Set ICR0.LVLMODE */
222 	__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
223 }
224 
225 static int __init x3proto_devices_setup(void)
226 {
227 	int ret, i;
228 
229 	/*
230 	 * IRLs are only needed for ILSEL mappings, so flip over the INTC
231 	 * pins at a later point to enable the GPIOs to settle.
232 	 */
233 	x3proto_init_irq();
234 
235 	/*
236 	 * Now that ILSELs are available, set up the baseboard GPIOs.
237 	 */
238 	ret = x3proto_gpio_setup();
239 	if (unlikely(ret))
240 		return ret;
241 
242 	/*
243 	 * Propagate dynamic GPIOs for the baseboard button device.
244 	 */
245 	for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++)
246 		baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;
247 
248 	r8a66597_usb_host_resources[1].start =
249 		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
250 
251 	m66592_usb_peripheral_resources[1].start =
252 		m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
253 
254 	smc91x_resources[1].start =
255 		smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
256 
257 	return platform_add_devices(x3proto_devices,
258 				    ARRAY_SIZE(x3proto_devices));
259 }
260 device_initcall(x3proto_devices_setup);
261 
262 static void __init x3proto_setup(char **cmdline_p)
263 {
264 	register_smp_ops(&shx3_smp_ops);
265 }
266 
267 static struct sh_machine_vector mv_x3proto __initmv = {
268 	.mv_name		= "x3proto",
269 	.mv_setup		= x3proto_setup,
270 };
271