xref: /openbmc/linux/arch/sh/boards/mach-se/7206/irq.c (revision 6197e5b7)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * linux/arch/sh/boards/se/7206/irq.c
4  *
5  * Copyright (C) 2005,2006 Yoshinori Sato
6  *
7  * Hitachi SolutionEngine Support.
8  *
9  */
10 #include <linux/init.h>
11 #include <linux/irq.h>
12 #include <linux/io.h>
13 #include <linux/interrupt.h>
14 #include <mach-se/mach/se7206.h>
15 
16 #define INTSTS0 0x31800000
17 #define INTSTS1 0x31800002
18 #define INTMSK0 0x31800004
19 #define INTMSK1 0x31800006
20 #define INTSEL  0x31800008
21 
22 #define IRQ0_IRQ 64
23 #define IRQ1_IRQ 65
24 #define IRQ3_IRQ 67
25 
26 #define INTC_IPR01 0xfffe0818
27 #define INTC_ICR1  0xfffe0802
28 
29 static void disable_se7206_irq(struct irq_data *data)
30 {
31 	unsigned int irq = data->irq;
32 	unsigned short val;
33 	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
34 	unsigned short msk0,msk1;
35 
36 	/* Set the priority in IPR to 0 */
37 	val = __raw_readw(INTC_IPR01);
38 	val &= mask;
39 	__raw_writew(val, INTC_IPR01);
40 	/* FPGA mask set */
41 	msk0 = __raw_readw(INTMSK0);
42 	msk1 = __raw_readw(INTMSK1);
43 
44 	switch (irq) {
45 	case IRQ0_IRQ:
46 		msk0 |= 0x0010;
47 		break;
48 	case IRQ1_IRQ:
49 		msk0 |= 0x000f;
50 		break;
51 	case IRQ3_IRQ:
52 		msk0 |= 0x0f00;
53 		msk1 |= 0x00ff;
54 		break;
55 	}
56 	__raw_writew(msk0, INTMSK0);
57 	__raw_writew(msk1, INTMSK1);
58 }
59 
60 static void enable_se7206_irq(struct irq_data *data)
61 {
62 	unsigned int irq = data->irq;
63 	unsigned short val;
64 	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
65 	unsigned short msk0,msk1;
66 
67 	/* Set priority in IPR back to original value */
68 	val = __raw_readw(INTC_IPR01);
69 	val |= value;
70 	__raw_writew(val, INTC_IPR01);
71 
72 	/* FPGA mask reset */
73 	msk0 = __raw_readw(INTMSK0);
74 	msk1 = __raw_readw(INTMSK1);
75 
76 	switch (irq) {
77 	case IRQ0_IRQ:
78 		msk0 &= ~0x0010;
79 		break;
80 	case IRQ1_IRQ:
81 		msk0 &= ~0x000f;
82 		break;
83 	case IRQ3_IRQ:
84 		msk0 &= ~0x0f00;
85 		msk1 &= ~0x00ff;
86 		break;
87 	}
88 	__raw_writew(msk0, INTMSK0);
89 	__raw_writew(msk1, INTMSK1);
90 }
91 
92 static void eoi_se7206_irq(struct irq_data *data)
93 {
94 	unsigned short sts0,sts1;
95 	unsigned int irq = data->irq;
96 
97 	if (!irqd_irq_disabled(data) && !irqd_irq_inprogress(data))
98 		enable_se7206_irq(data);
99 	/* FPGA isr clear */
100 	sts0 = __raw_readw(INTSTS0);
101 	sts1 = __raw_readw(INTSTS1);
102 
103 	switch (irq) {
104 	case IRQ0_IRQ:
105 		sts0 &= ~0x0010;
106 		break;
107 	case IRQ1_IRQ:
108 		sts0 &= ~0x000f;
109 		break;
110 	case IRQ3_IRQ:
111 		sts0 &= ~0x0f00;
112 		sts1 &= ~0x00ff;
113 		break;
114 	}
115 	__raw_writew(sts0, INTSTS0);
116 	__raw_writew(sts1, INTSTS1);
117 }
118 
119 static struct irq_chip se7206_irq_chip __read_mostly = {
120 	.name		= "SE7206-FPGA",
121 	.irq_mask	= disable_se7206_irq,
122 	.irq_unmask	= enable_se7206_irq,
123 	.irq_eoi	= eoi_se7206_irq,
124 };
125 
126 static void make_se7206_irq(unsigned int irq)
127 {
128 	disable_irq_nosync(irq);
129 	irq_set_chip_and_handler_name(irq, &se7206_irq_chip,
130 				      handle_level_irq, "level");
131 	disable_se7206_irq(irq_get_irq_data(irq));
132 }
133 
134 /*
135  * Initialize IRQ setting
136  */
137 void __init init_se7206_IRQ(void)
138 {
139 	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
140 	make_se7206_irq(IRQ1_IRQ); /* ATA */
141 	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
142 
143 	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
144 
145 	/* FPGA System register setup*/
146 	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
147 	__raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
148 
149 	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
150 	__raw_writew(0x0001,INTSEL);
151 }
152