1 /* 2 * 3 * Setup for the SMSC FDC37C93xAPM 4 * 5 * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) 6 * Copyright (C) 2003, 2004 SuperH, Inc. 7 * Copyright (C) 2004, 2005 Paul Mundt 8 * 9 * SuperH SH4-202 MicroDev board support. 10 * 11 * May be copied or modified under the terms of the GNU General Public 12 * License. See linux/COPYING for more information. 13 */ 14 #include <linux/init.h> 15 #include <linux/ioport.h> 16 #include <linux/io.h> 17 #include <linux/err.h> 18 #include <mach/microdev.h> 19 20 #define SMSC_CONFIG_PORT_ADDR (0x3F0) 21 #define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR 22 #define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1) 23 24 #define SMSC_ENTER_CONFIG_KEY 0x55 25 #define SMSC_EXIT_CONFIG_KEY 0xaa 26 27 #define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */ 28 #define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */ 29 #define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */ 30 #define SMSC_ACTIVATE_INDEX 0x30 /* Activate */ 31 #define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */ 32 #define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */ 33 #define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */ 34 #define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */ 35 #define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */ 36 #define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */ 37 38 #define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */ 39 #define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */ 40 #define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */ 41 #define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */ 42 #define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */ 43 #define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */ 44 #define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */ 45 46 #define SMSC_READ_INDEXED(index) ({ \ 47 outb((index), SMSC_INDEX_PORT_ADDR); \ 48 inb(SMSC_DATA_PORT_ADDR); }) 49 #define SMSC_WRITE_INDEXED(val, index) ({ \ 50 outb((index), SMSC_INDEX_PORT_ADDR); \ 51 outb((val), SMSC_DATA_PORT_ADDR); }) 52 53 #define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */ 54 #define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */ 55 #define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */ 56 #define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */ 57 58 #define SERIAL1_PRIMARY_BASE 0x03f8 59 #define SERIAL2_PRIMARY_BASE 0x02f8 60 61 #define MSB(x) ( (x) >> 8 ) 62 #define LSB(x) ( (x) & 0xff ) 63 64 /* General-Purpose base address on CPU-board FPGA */ 65 #define MICRODEV_FPGA_GP_BASE 0xa6100000ul 66 67 static int __init smsc_superio_setup(void) 68 { 69 70 unsigned char devid, devrev; 71 72 /* Initially the chip is in run state */ 73 /* Put it into configuration state */ 74 outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); 75 76 /* Read device ID info */ 77 devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX); 78 devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX); 79 80 if ((devid == 0x30) && (devrev == 0x01)) 81 printk("SMSC FDC37C93xAPM SuperIO device detected\n"); 82 else 83 return -ENODEV; 84 85 /* Select the keyboard device */ 86 SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); 87 /* enable it */ 88 SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); 89 /* enable the interrupts */ 90 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX); 91 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX); 92 93 /* Select the Serial #1 device */ 94 SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX); 95 /* enable it */ 96 SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); 97 /* program with port addresses */ 98 SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); 99 SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); 100 SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX); 101 /* enable the interrupts */ 102 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX); 103 104 /* Select the Serial #2 device */ 105 SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX); 106 /* enable it */ 107 SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); 108 /* program with port addresses */ 109 SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); 110 SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); 111 SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX); 112 /* enable the interrupts */ 113 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX); 114 115 /* Select the IDE#1 device */ 116 SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); 117 /* enable it */ 118 SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); 119 /* program with port addresses */ 120 SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); 121 SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); 122 SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0); 123 SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1); 124 SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX); 125 SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX); 126 /* select the interrupt */ 127 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX); 128 129 /* Select the IDE#2 device */ 130 SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX); 131 /* enable it */ 132 SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); 133 /* program with port addresses */ 134 SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); 135 SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); 136 SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0); 137 SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1); 138 /* select the interrupt */ 139 SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX); 140 141 /* Select the configuration registers */ 142 SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX); 143 /* enable the appropriate GPIO pins for IDE functionality: 144 * bit[0] In/Out 1==input; 0==output 145 * bit[1] Polarity 1==invert; 0==no invert 146 * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable 147 * bit[3:4] Function Select 00==original; 01==Alternate Function #1 148 */ 149 SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ 150 SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ 151 SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ 152 SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ 153 SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */ 154 155 /* Exit the configuration state */ 156 outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); 157 158 return 0; 159 } 160 device_initcall(smsc_superio_setup); 161