1 /* 2 * KFR2R09 board support code 3 * 4 * Copyright (C) 2009 Magnus Damm 5 * 6 * This file is subject to the terms and conditions of the GNU General Public 7 * License. See the file "COPYING" in the main directory of this archive 8 * for more details. 9 */ 10 #include <linux/init.h> 11 #include <linux/platform_device.h> 12 #include <linux/interrupt.h> 13 #include <linux/mmc/host.h> 14 #include <linux/mfd/tmio.h> 15 #include <linux/mtd/physmap.h> 16 #include <linux/mtd/onenand.h> 17 #include <linux/delay.h> 18 #include <linux/clk.h> 19 #include <linux/gpio.h> 20 #include <linux/input.h> 21 #include <linux/input/sh_keysc.h> 22 #include <linux/i2c.h> 23 #include <linux/platform_data/lv5207lp.h> 24 #include <linux/regulator/fixed.h> 25 #include <linux/regulator/machine.h> 26 #include <linux/usb/r8a66597.h> 27 #include <linux/videodev2.h> 28 #include <linux/sh_intc.h> 29 #include <media/i2c/rj54n1cb0c.h> 30 #include <media/soc_camera.h> 31 #include <media/drv-intf/sh_mobile_ceu.h> 32 #include <video/sh_mobile_lcdc.h> 33 #include <asm/suspend.h> 34 #include <asm/clock.h> 35 #include <asm/machvec.h> 36 #include <asm/io.h> 37 #include <cpu/sh7724.h> 38 #include <mach/kfr2r09.h> 39 40 static struct mtd_partition kfr2r09_nor_flash_partitions[] = 41 { 42 { 43 .name = "boot", 44 .offset = 0, 45 .size = (4 * 1024 * 1024), 46 .mask_flags = MTD_WRITEABLE, /* Read-only */ 47 }, 48 { 49 .name = "other", 50 .offset = MTDPART_OFS_APPEND, 51 .size = MTDPART_SIZ_FULL, 52 }, 53 }; 54 55 static struct physmap_flash_data kfr2r09_nor_flash_data = { 56 .width = 2, 57 .parts = kfr2r09_nor_flash_partitions, 58 .nr_parts = ARRAY_SIZE(kfr2r09_nor_flash_partitions), 59 }; 60 61 static struct resource kfr2r09_nor_flash_resources[] = { 62 [0] = { 63 .name = "NOR Flash", 64 .start = 0x00000000, 65 .end = 0x03ffffff, 66 .flags = IORESOURCE_MEM, 67 } 68 }; 69 70 static struct platform_device kfr2r09_nor_flash_device = { 71 .name = "physmap-flash", 72 .resource = kfr2r09_nor_flash_resources, 73 .num_resources = ARRAY_SIZE(kfr2r09_nor_flash_resources), 74 .dev = { 75 .platform_data = &kfr2r09_nor_flash_data, 76 }, 77 }; 78 79 static struct resource kfr2r09_nand_flash_resources[] = { 80 [0] = { 81 .name = "NAND Flash", 82 .start = 0x10000000, 83 .end = 0x1001ffff, 84 .flags = IORESOURCE_MEM, 85 } 86 }; 87 88 static struct platform_device kfr2r09_nand_flash_device = { 89 .name = "onenand-flash", 90 .resource = kfr2r09_nand_flash_resources, 91 .num_resources = ARRAY_SIZE(kfr2r09_nand_flash_resources), 92 }; 93 94 static struct sh_keysc_info kfr2r09_sh_keysc_info = { 95 .mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */ 96 .scan_timing = 3, 97 .delay = 10, 98 .keycodes = { 99 KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER, 100 KEY_1, KEY_2, KEY_3, 0, KEY_UP, 101 KEY_4, KEY_5, KEY_6, 0, KEY_LEFT, 102 KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT, 103 KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN, 104 0, 0, 0, 0, 0 105 }, 106 }; 107 108 static struct resource kfr2r09_sh_keysc_resources[] = { 109 [0] = { 110 .name = "KEYSC", 111 .start = 0x044b0000, 112 .end = 0x044b000f, 113 .flags = IORESOURCE_MEM, 114 }, 115 [1] = { 116 .start = evt2irq(0xbe0), 117 .flags = IORESOURCE_IRQ, 118 }, 119 }; 120 121 static struct platform_device kfr2r09_sh_keysc_device = { 122 .name = "sh_keysc", 123 .id = 0, /* "keysc0" clock */ 124 .num_resources = ARRAY_SIZE(kfr2r09_sh_keysc_resources), 125 .resource = kfr2r09_sh_keysc_resources, 126 .dev = { 127 .platform_data = &kfr2r09_sh_keysc_info, 128 }, 129 }; 130 131 static const struct fb_videomode kfr2r09_lcdc_modes[] = { 132 { 133 .name = "TX07D34VM0AAA", 134 .xres = 240, 135 .yres = 400, 136 .left_margin = 0, 137 .right_margin = 16, 138 .hsync_len = 8, 139 .upper_margin = 0, 140 .lower_margin = 1, 141 .vsync_len = 1, 142 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 143 }, 144 }; 145 146 static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = { 147 .clock_source = LCDC_CLK_BUS, 148 .ch[0] = { 149 .chan = LCDC_CHAN_MAINLCD, 150 .fourcc = V4L2_PIX_FMT_RGB565, 151 .interface_type = SYS18, 152 .clock_divider = 6, 153 .flags = LCDC_FLAGS_DWPOL, 154 .lcd_modes = kfr2r09_lcdc_modes, 155 .num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes), 156 .panel_cfg = { 157 .width = 35, 158 .height = 58, 159 .setup_sys = kfr2r09_lcd_setup, 160 .start_transfer = kfr2r09_lcd_start, 161 }, 162 .sys_bus_cfg = { 163 .ldmt2r = 0x07010904, 164 .ldmt3r = 0x14012914, 165 /* set 1s delay to encourage fsync() */ 166 .deferred_io_msec = 1000, 167 }, 168 } 169 }; 170 171 static struct resource kfr2r09_sh_lcdc_resources[] = { 172 [0] = { 173 .name = "LCDC", 174 .start = 0xfe940000, /* P4-only space */ 175 .end = 0xfe942fff, 176 .flags = IORESOURCE_MEM, 177 }, 178 [1] = { 179 .start = evt2irq(0xf40), 180 .flags = IORESOURCE_IRQ, 181 }, 182 }; 183 184 static struct platform_device kfr2r09_sh_lcdc_device = { 185 .name = "sh_mobile_lcdc_fb", 186 .num_resources = ARRAY_SIZE(kfr2r09_sh_lcdc_resources), 187 .resource = kfr2r09_sh_lcdc_resources, 188 .dev = { 189 .platform_data = &kfr2r09_sh_lcdc_info, 190 }, 191 }; 192 193 static struct lv5207lp_platform_data kfr2r09_backlight_data = { 194 .fbdev = &kfr2r09_sh_lcdc_device.dev, 195 .def_value = 13, 196 .max_value = 13, 197 }; 198 199 static struct i2c_board_info kfr2r09_backlight_board_info = { 200 I2C_BOARD_INFO("lv5207lp", 0x75), 201 .platform_data = &kfr2r09_backlight_data, 202 }; 203 204 static struct r8a66597_platdata kfr2r09_usb0_gadget_data = { 205 .on_chip = 1, 206 }; 207 208 static struct resource kfr2r09_usb0_gadget_resources[] = { 209 [0] = { 210 .start = 0x04d80000, 211 .end = 0x04d80123, 212 .flags = IORESOURCE_MEM, 213 }, 214 [1] = { 215 .start = evt2irq(0xa20), 216 .end = evt2irq(0xa20), 217 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, 218 }, 219 }; 220 221 static struct platform_device kfr2r09_usb0_gadget_device = { 222 .name = "r8a66597_udc", 223 .id = 0, 224 .dev = { 225 .dma_mask = NULL, /* not use dma */ 226 .coherent_dma_mask = 0xffffffff, 227 .platform_data = &kfr2r09_usb0_gadget_data, 228 }, 229 .num_resources = ARRAY_SIZE(kfr2r09_usb0_gadget_resources), 230 .resource = kfr2r09_usb0_gadget_resources, 231 }; 232 233 static struct sh_mobile_ceu_info sh_mobile_ceu_info = { 234 .flags = SH_CEU_FLAG_USE_8BIT_BUS, 235 }; 236 237 static struct resource kfr2r09_ceu_resources[] = { 238 [0] = { 239 .name = "CEU", 240 .start = 0xfe910000, 241 .end = 0xfe91009f, 242 .flags = IORESOURCE_MEM, 243 }, 244 [1] = { 245 .start = evt2irq(0x880), 246 .end = evt2irq(0x880), 247 .flags = IORESOURCE_IRQ, 248 }, 249 [2] = { 250 /* place holder for contiguous memory */ 251 }, 252 }; 253 254 static struct platform_device kfr2r09_ceu_device = { 255 .name = "sh_mobile_ceu", 256 .id = 0, /* "ceu0" clock */ 257 .num_resources = ARRAY_SIZE(kfr2r09_ceu_resources), 258 .resource = kfr2r09_ceu_resources, 259 .dev = { 260 .platform_data = &sh_mobile_ceu_info, 261 }, 262 }; 263 264 static struct i2c_board_info kfr2r09_i2c_camera = { 265 I2C_BOARD_INFO("rj54n1cb0c", 0x50), 266 }; 267 268 static struct clk *camera_clk; 269 270 /* set VIO_CKO clock to 25MHz */ 271 #define CEU_MCLK_FREQ 25000000 272 273 #define DRVCRB 0xA405018C 274 static int camera_power(struct device *dev, int mode) 275 { 276 int ret; 277 278 if (mode) { 279 long rate; 280 281 camera_clk = clk_get(NULL, "video_clk"); 282 if (IS_ERR(camera_clk)) 283 return PTR_ERR(camera_clk); 284 285 rate = clk_round_rate(camera_clk, CEU_MCLK_FREQ); 286 ret = clk_set_rate(camera_clk, rate); 287 if (ret < 0) 288 goto eclkrate; 289 290 /* set DRVCRB 291 * 292 * use 1.8 V for VccQ_VIO 293 * use 2.85V for VccQ_SR 294 */ 295 __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB); 296 297 /* reset clear */ 298 ret = gpio_request(GPIO_PTB4, NULL); 299 if (ret < 0) 300 goto eptb4; 301 ret = gpio_request(GPIO_PTB7, NULL); 302 if (ret < 0) 303 goto eptb7; 304 305 ret = gpio_direction_output(GPIO_PTB4, 1); 306 if (!ret) 307 ret = gpio_direction_output(GPIO_PTB7, 1); 308 if (ret < 0) 309 goto egpioout; 310 msleep(1); 311 312 ret = clk_enable(camera_clk); /* start VIO_CKO */ 313 if (ret < 0) 314 goto eclkon; 315 316 return 0; 317 } 318 319 ret = 0; 320 321 clk_disable(camera_clk); 322 eclkon: 323 gpio_set_value(GPIO_PTB7, 0); 324 egpioout: 325 gpio_set_value(GPIO_PTB4, 0); 326 gpio_free(GPIO_PTB7); 327 eptb7: 328 gpio_free(GPIO_PTB4); 329 eptb4: 330 eclkrate: 331 clk_put(camera_clk); 332 return ret; 333 } 334 335 static struct rj54n1_pdata rj54n1_priv = { 336 .mclk_freq = CEU_MCLK_FREQ, 337 .ioctl_high = false, 338 }; 339 340 static struct soc_camera_link rj54n1_link = { 341 .power = camera_power, 342 .board_info = &kfr2r09_i2c_camera, 343 .i2c_adapter_id = 1, 344 .priv = &rj54n1_priv, 345 }; 346 347 static struct platform_device kfr2r09_camera = { 348 .name = "soc-camera-pdrv", 349 .id = 0, 350 .dev = { 351 .platform_data = &rj54n1_link, 352 }, 353 }; 354 355 /* Fixed 3.3V regulator to be used by SDHI0 */ 356 static struct regulator_consumer_supply fixed3v3_power_consumers[] = 357 { 358 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), 359 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), 360 }; 361 362 static struct resource kfr2r09_sh_sdhi0_resources[] = { 363 [0] = { 364 .name = "SDHI0", 365 .start = 0x04ce0000, 366 .end = 0x04ce00ff, 367 .flags = IORESOURCE_MEM, 368 }, 369 [1] = { 370 .start = evt2irq(0xe80), 371 .flags = IORESOURCE_IRQ, 372 }, 373 }; 374 375 static struct tmio_mmc_data sh7724_sdhi0_data = { 376 .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX, 377 .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX, 378 .capabilities = MMC_CAP_SDIO_IRQ, 379 .capabilities2 = MMC_CAP2_NO_WRITE_PROTECT, 380 }; 381 382 static struct platform_device kfr2r09_sh_sdhi0_device = { 383 .name = "sh_mobile_sdhi", 384 .num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources), 385 .resource = kfr2r09_sh_sdhi0_resources, 386 .dev = { 387 .platform_data = &sh7724_sdhi0_data, 388 }, 389 }; 390 391 static struct platform_device *kfr2r09_devices[] __initdata = { 392 &kfr2r09_nor_flash_device, 393 &kfr2r09_nand_flash_device, 394 &kfr2r09_sh_keysc_device, 395 &kfr2r09_sh_lcdc_device, 396 &kfr2r09_ceu_device, 397 &kfr2r09_camera, 398 &kfr2r09_sh_sdhi0_device, 399 }; 400 401 #define BSC_CS0BCR 0xfec10004 402 #define BSC_CS0WCR 0xfec10024 403 #define BSC_CS4BCR 0xfec10010 404 #define BSC_CS4WCR 0xfec10030 405 #define PORT_MSELCRB 0xa4050182 406 407 #ifdef CONFIG_I2C 408 static int kfr2r09_usb0_gadget_i2c_setup(void) 409 { 410 struct i2c_adapter *a; 411 struct i2c_msg msg; 412 unsigned char buf[2]; 413 int ret; 414 415 a = i2c_get_adapter(0); 416 if (!a) 417 return -ENODEV; 418 419 /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */ 420 buf[0] = 0x13; 421 msg.addr = 0x09; 422 msg.buf = buf; 423 msg.len = 1; 424 msg.flags = 0; 425 ret = i2c_transfer(a, &msg, 1); 426 if (ret != 1) 427 return -ENODEV; 428 429 buf[0] = 0; 430 msg.addr = 0x09; 431 msg.buf = buf; 432 msg.len = 1; 433 msg.flags = I2C_M_RD; 434 ret = i2c_transfer(a, &msg, 1); 435 if (ret != 1) 436 return -ENODEV; 437 438 buf[1] = buf[0] | (1 << 1); 439 buf[0] = 0x13; 440 msg.addr = 0x09; 441 msg.buf = buf; 442 msg.len = 2; 443 msg.flags = 0; 444 ret = i2c_transfer(a, &msg, 1); 445 if (ret != 1) 446 return -ENODEV; 447 448 return 0; 449 } 450 451 static int kfr2r09_serial_i2c_setup(void) 452 { 453 struct i2c_adapter *a; 454 struct i2c_msg msg; 455 unsigned char buf[2]; 456 int ret; 457 458 a = i2c_get_adapter(0); 459 if (!a) 460 return -ENODEV; 461 462 /* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */ 463 buf[0] = 0x13; 464 msg.addr = 0x09; 465 msg.buf = buf; 466 msg.len = 1; 467 msg.flags = 0; 468 ret = i2c_transfer(a, &msg, 1); 469 if (ret != 1) 470 return -ENODEV; 471 472 buf[0] = 0; 473 msg.addr = 0x09; 474 msg.buf = buf; 475 msg.len = 1; 476 msg.flags = I2C_M_RD; 477 ret = i2c_transfer(a, &msg, 1); 478 if (ret != 1) 479 return -ENODEV; 480 481 buf[1] = buf[0] | (1 << 6); 482 buf[0] = 0x13; 483 msg.addr = 0x09; 484 msg.buf = buf; 485 msg.len = 2; 486 msg.flags = 0; 487 ret = i2c_transfer(a, &msg, 1); 488 if (ret != 1) 489 return -ENODEV; 490 491 return 0; 492 } 493 #else 494 static int kfr2r09_usb0_gadget_i2c_setup(void) 495 { 496 return -ENODEV; 497 } 498 499 static int kfr2r09_serial_i2c_setup(void) 500 { 501 return -ENODEV; 502 } 503 #endif 504 505 static int kfr2r09_usb0_gadget_setup(void) 506 { 507 int plugged_in; 508 509 gpio_request(GPIO_PTN4, NULL); /* USB_DET */ 510 gpio_direction_input(GPIO_PTN4); 511 plugged_in = gpio_get_value(GPIO_PTN4); 512 if (!plugged_in) 513 return -ENODEV; /* no cable plugged in */ 514 515 if (kfr2r09_usb0_gadget_i2c_setup() != 0) 516 return -ENODEV; /* unable to configure using i2c */ 517 518 __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); 519 gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */ 520 gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */ 521 gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */ 522 msleep(20); /* wait 20ms to let the clock settle */ 523 clk_enable(clk_get(NULL, "usb0")); 524 __raw_writew(0x0600, 0xa40501d4); 525 526 return 0; 527 } 528 529 extern char kfr2r09_sdram_enter_start; 530 extern char kfr2r09_sdram_enter_end; 531 extern char kfr2r09_sdram_leave_start; 532 extern char kfr2r09_sdram_leave_end; 533 534 static int __init kfr2r09_devices_setup(void) 535 { 536 /* register board specific self-refresh code */ 537 sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF | 538 SUSP_SH_RSTANDBY, 539 &kfr2r09_sdram_enter_start, 540 &kfr2r09_sdram_enter_end, 541 &kfr2r09_sdram_leave_start, 542 &kfr2r09_sdram_leave_end); 543 544 regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, 545 ARRAY_SIZE(fixed3v3_power_consumers), 3300000); 546 547 /* enable SCIF1 serial port for YC401 console support */ 548 gpio_request(GPIO_FN_SCIF1_RXD, NULL); 549 gpio_request(GPIO_FN_SCIF1_TXD, NULL); 550 kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */ 551 gpio_request(GPIO_PTG3, NULL); /* HPON_ON */ 552 gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */ 553 554 /* setup NOR flash at CS0 */ 555 __raw_writel(0x36db0400, BSC_CS0BCR); 556 __raw_writel(0x00000500, BSC_CS0WCR); 557 558 /* setup NAND flash at CS4 */ 559 __raw_writel(0x36db0400, BSC_CS4BCR); 560 __raw_writel(0x00000500, BSC_CS4WCR); 561 562 /* setup KEYSC pins */ 563 gpio_request(GPIO_FN_KEYOUT0, NULL); 564 gpio_request(GPIO_FN_KEYOUT1, NULL); 565 gpio_request(GPIO_FN_KEYOUT2, NULL); 566 gpio_request(GPIO_FN_KEYOUT3, NULL); 567 gpio_request(GPIO_FN_KEYOUT4_IN6, NULL); 568 gpio_request(GPIO_FN_KEYIN0, NULL); 569 gpio_request(GPIO_FN_KEYIN1, NULL); 570 gpio_request(GPIO_FN_KEYIN2, NULL); 571 gpio_request(GPIO_FN_KEYIN3, NULL); 572 gpio_request(GPIO_FN_KEYIN4, NULL); 573 gpio_request(GPIO_FN_KEYOUT5_IN5, NULL); 574 575 /* setup LCDC pins for SYS panel */ 576 gpio_request(GPIO_FN_LCDD17, NULL); 577 gpio_request(GPIO_FN_LCDD16, NULL); 578 gpio_request(GPIO_FN_LCDD15, NULL); 579 gpio_request(GPIO_FN_LCDD14, NULL); 580 gpio_request(GPIO_FN_LCDD13, NULL); 581 gpio_request(GPIO_FN_LCDD12, NULL); 582 gpio_request(GPIO_FN_LCDD11, NULL); 583 gpio_request(GPIO_FN_LCDD10, NULL); 584 gpio_request(GPIO_FN_LCDD9, NULL); 585 gpio_request(GPIO_FN_LCDD8, NULL); 586 gpio_request(GPIO_FN_LCDD7, NULL); 587 gpio_request(GPIO_FN_LCDD6, NULL); 588 gpio_request(GPIO_FN_LCDD5, NULL); 589 gpio_request(GPIO_FN_LCDD4, NULL); 590 gpio_request(GPIO_FN_LCDD3, NULL); 591 gpio_request(GPIO_FN_LCDD2, NULL); 592 gpio_request(GPIO_FN_LCDD1, NULL); 593 gpio_request(GPIO_FN_LCDD0, NULL); 594 gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */ 595 gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */ 596 gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */ 597 gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */ 598 gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */ 599 gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */ 600 gpio_direction_output(GPIO_PTE4, 1); 601 gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */ 602 gpio_direction_output(GPIO_PTF4, 1); 603 gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */ 604 gpio_direction_output(GPIO_PTU0, 1); 605 606 /* setup USB function */ 607 if (kfr2r09_usb0_gadget_setup() == 0) 608 platform_device_register(&kfr2r09_usb0_gadget_device); 609 610 /* CEU */ 611 gpio_request(GPIO_FN_VIO_CKO, NULL); 612 gpio_request(GPIO_FN_VIO0_CLK, NULL); 613 gpio_request(GPIO_FN_VIO0_VD, NULL); 614 gpio_request(GPIO_FN_VIO0_HD, NULL); 615 gpio_request(GPIO_FN_VIO0_FLD, NULL); 616 gpio_request(GPIO_FN_VIO0_D7, NULL); 617 gpio_request(GPIO_FN_VIO0_D6, NULL); 618 gpio_request(GPIO_FN_VIO0_D5, NULL); 619 gpio_request(GPIO_FN_VIO0_D4, NULL); 620 gpio_request(GPIO_FN_VIO0_D3, NULL); 621 gpio_request(GPIO_FN_VIO0_D2, NULL); 622 gpio_request(GPIO_FN_VIO0_D1, NULL); 623 gpio_request(GPIO_FN_VIO0_D0, NULL); 624 625 platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20); 626 627 /* SDHI0 connected to yc304 */ 628 gpio_request(GPIO_FN_SDHI0CD, NULL); 629 gpio_request(GPIO_FN_SDHI0D3, NULL); 630 gpio_request(GPIO_FN_SDHI0D2, NULL); 631 gpio_request(GPIO_FN_SDHI0D1, NULL); 632 gpio_request(GPIO_FN_SDHI0D0, NULL); 633 gpio_request(GPIO_FN_SDHI0CMD, NULL); 634 gpio_request(GPIO_FN_SDHI0CLK, NULL); 635 636 i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1); 637 638 return platform_add_devices(kfr2r09_devices, 639 ARRAY_SIZE(kfr2r09_devices)); 640 } 641 device_initcall(kfr2r09_devices_setup); 642 643 /* Return the board specific boot mode pin configuration */ 644 static int kfr2r09_mode_pins(void) 645 { 646 /* MD0=1, MD1=1, MD2=0: Clock Mode 3 647 * MD3=0: 16-bit Area0 Bus Width 648 * MD5=1: Little Endian 649 * MD8=1: Test Mode Disabled 650 */ 651 return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8; 652 } 653 654 /* 655 * The Machine Vector 656 */ 657 static struct sh_machine_vector mv_kfr2r09 __initmv = { 658 .mv_name = "kfr2r09", 659 .mv_mode_pins = kfr2r09_mode_pins, 660 }; 661