1 /*
2  * Copyright (C) 2009 Renesas Solutions Corp.
3  *
4  * Kuninori Morimoto <morimoto.kuninori@renesas.com>
5  *
6  * This file is subject to the terms and conditions of the GNU General Public
7  * License.  See the file "COPYING" in the main directory of this archive
8  * for more details.
9  */
10 #include <asm/clock.h>
11 #include <asm/heartbeat.h>
12 #include <asm/suspend.h>
13 #include <cpu/sh7724.h>
14 #include <linux/delay.h>
15 #include <linux/device.h>
16 #include <linux/i2c.h>
17 #include <linux/io.h>
18 #include <linux/init.h>
19 #include <linux/input.h>
20 #include <linux/input/sh_keysc.h>
21 #include <linux/interrupt.h>
22 #include <linux/memblock.h>
23 #include <linux/mfd/tmio.h>
24 #include <linux/mmc/host.h>
25 #include <linux/mmc/sh_mmcif.h>
26 #include <linux/mtd/physmap.h>
27 #include <linux/gpio.h>
28 #include <linux/gpio/machine.h>
29 #include <linux/platform_data/gpio_backlight.h>
30 #include <linux/platform_data/tsc2007.h>
31 #include <linux/platform_device.h>
32 #include <linux/regulator/fixed.h>
33 #include <linux/regulator/machine.h>
34 #include <linux/sh_eth.h>
35 #include <linux/sh_intc.h>
36 #include <linux/spi/mmc_spi.h>
37 #include <linux/spi/sh_msiof.h>
38 #include <linux/spi/spi.h>
39 #include <linux/usb/r8a66597.h>
40 #include <linux/usb/renesas_usbhs.h>
41 #include <linux/videodev2.h>
42 
43 #include <media/drv-intf/renesas-ceu.h>
44 #include <media/i2c/mt9t112.h>
45 #include <media/i2c/tw9910.h>
46 
47 #include <sound/sh_fsi.h>
48 #include <sound/simple_card.h>
49 
50 #include <video/sh_mobile_lcdc.h>
51 
52 /*
53  *  Address      Interface        BusWidth
54  *-----------------------------------------
55  *  0x0000_0000  uboot            16bit
56  *  0x0004_0000  Linux romImage   16bit
57  *  0x0014_0000  MTD for Linux    16bit
58  *  0x0400_0000  Internal I/O     16/32bit
59  *  0x0800_0000  DRAM             32bit
60  *  0x1800_0000  MFI              16bit
61  */
62 
63 /* SWITCH
64  *------------------------------
65  * DS2[1] = FlashROM write protect  ON     : write protect
66  *                                  OFF    : No write protect
67  * DS2[2] = RMII / TS, SCIF         ON     : RMII
68  *                                  OFF    : TS, SCIF3
69  * DS2[3] = Camera / Video          ON     : Camera
70  *                                  OFF    : NTSC/PAL (IN)
71  * DS2[5] = NTSC_OUT Clock          ON     : On board OSC
72  *                                  OFF    : SH7724 DV_CLK
73  * DS2[6-7] = MMC / SD              ON-OFF : SD
74  *                                  OFF-ON : MMC
75  */
76 
77 /*
78  * FSI - DA7210
79  *
80  * it needs amixer settings for playing
81  *
82  * amixer set 'HeadPhone' 80
83  * amixer set 'Out Mixer Left DAC Left' on
84  * amixer set 'Out Mixer Right DAC Right' on
85  */
86 
87 #define CEU_BUFFER_MEMORY_SIZE		(4 << 20)
88 static phys_addr_t ceu0_dma_membase;
89 static phys_addr_t ceu1_dma_membase;
90 
91 /* Heartbeat */
92 static unsigned char led_pos[] = { 0, 1, 2, 3 };
93 
94 static struct heartbeat_data heartbeat_data = {
95 	.nr_bits = 4,
96 	.bit_pos = led_pos,
97 };
98 
99 static struct resource heartbeat_resource = {
100 	.start  = 0xA405012C, /* PTG */
101 	.end    = 0xA405012E - 1,
102 	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
103 };
104 
105 static struct platform_device heartbeat_device = {
106 	.name           = "heartbeat",
107 	.id             = -1,
108 	.dev = {
109 		.platform_data = &heartbeat_data,
110 	},
111 	.num_resources  = 1,
112 	.resource       = &heartbeat_resource,
113 };
114 
115 /* MTD */
116 static struct mtd_partition nor_flash_partitions[] = {
117 	{
118 		.name = "boot loader",
119 		.offset = 0,
120 		.size = (5 * 1024 * 1024),
121 		.mask_flags = MTD_WRITEABLE,  /* force read-only */
122 	}, {
123 		.name = "free-area",
124 		.offset = MTDPART_OFS_APPEND,
125 		.size = MTDPART_SIZ_FULL,
126 	},
127 };
128 
129 static struct physmap_flash_data nor_flash_data = {
130 	.width		= 2,
131 	.parts		= nor_flash_partitions,
132 	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
133 };
134 
135 static struct resource nor_flash_resources[] = {
136 	[0] = {
137 		.name	= "NOR Flash",
138 		.start	= 0x00000000,
139 		.end	= 0x03ffffff,
140 		.flags	= IORESOURCE_MEM,
141 	}
142 };
143 
144 static struct platform_device nor_flash_device = {
145 	.name		= "physmap-flash",
146 	.resource	= nor_flash_resources,
147 	.num_resources	= ARRAY_SIZE(nor_flash_resources),
148 	.dev		= {
149 		.platform_data = &nor_flash_data,
150 	},
151 };
152 
153 /* SH Eth */
154 #define SH_ETH_ADDR	(0xA4600000)
155 static struct resource sh_eth_resources[] = {
156 	[0] = {
157 		.start = SH_ETH_ADDR,
158 		.end   = SH_ETH_ADDR + 0x1FC,
159 		.flags = IORESOURCE_MEM,
160 	},
161 	[1] = {
162 		.start = evt2irq(0xd60),
163 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
164 	},
165 };
166 
167 static struct sh_eth_plat_data sh_eth_plat = {
168 	.phy = 0x1f, /* SMSC LAN8700 */
169 	.phy_interface = PHY_INTERFACE_MODE_MII,
170 	.ether_link_active_low = 1
171 };
172 
173 static struct platform_device sh_eth_device = {
174 	.name = "sh7724-ether",
175 	.id = 0,
176 	.dev = {
177 		.platform_data = &sh_eth_plat,
178 	},
179 	.num_resources = ARRAY_SIZE(sh_eth_resources),
180 	.resource = sh_eth_resources,
181 };
182 
183 /* USB0 host */
184 static void usb0_port_power(int port, int power)
185 {
186 	gpio_set_value(GPIO_PTB4, power);
187 }
188 
189 static struct r8a66597_platdata usb0_host_data = {
190 	.on_chip = 1,
191 	.port_power = usb0_port_power,
192 };
193 
194 static struct resource usb0_host_resources[] = {
195 	[0] = {
196 		.start	= 0xa4d80000,
197 		.end	= 0xa4d80124 - 1,
198 		.flags	= IORESOURCE_MEM,
199 	},
200 	[1] = {
201 		.start	= evt2irq(0xa20),
202 		.end	= evt2irq(0xa20),
203 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
204 	},
205 };
206 
207 static struct platform_device usb0_host_device = {
208 	.name		= "r8a66597_hcd",
209 	.id		= 0,
210 	.dev = {
211 		.dma_mask		= NULL,         /*  not use dma */
212 		.coherent_dma_mask	= 0xffffffff,
213 		.platform_data		= &usb0_host_data,
214 	},
215 	.num_resources	= ARRAY_SIZE(usb0_host_resources),
216 	.resource	= usb0_host_resources,
217 };
218 
219 /* USB1 host/function */
220 static void usb1_port_power(int port, int power)
221 {
222 	gpio_set_value(GPIO_PTB5, power);
223 }
224 
225 static struct r8a66597_platdata usb1_common_data = {
226 	.on_chip = 1,
227 	.port_power = usb1_port_power,
228 };
229 
230 static struct resource usb1_common_resources[] = {
231 	[0] = {
232 		.start	= 0xa4d90000,
233 		.end	= 0xa4d90124 - 1,
234 		.flags	= IORESOURCE_MEM,
235 	},
236 	[1] = {
237 		.start	= evt2irq(0xa40),
238 		.end	= evt2irq(0xa40),
239 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
240 	},
241 };
242 
243 static struct platform_device usb1_common_device = {
244 	/* .name will be added in arch_setup */
245 	.id		= 1,
246 	.dev = {
247 		.dma_mask		= NULL,         /*  not use dma */
248 		.coherent_dma_mask	= 0xffffffff,
249 		.platform_data		= &usb1_common_data,
250 	},
251 	.num_resources	= ARRAY_SIZE(usb1_common_resources),
252 	.resource	= usb1_common_resources,
253 };
254 
255 /*
256  * USBHS
257  */
258 static int usbhs_get_id(struct platform_device *pdev)
259 {
260 	return gpio_get_value(GPIO_PTB3);
261 }
262 
263 static int usbhs_phy_reset(struct platform_device *pdev)
264 {
265 	/* enable vbus if HOST */
266 	if (!gpio_get_value(GPIO_PTB3))
267 		gpio_set_value(GPIO_PTB5, 1);
268 
269 	return 0;
270 }
271 
272 static struct renesas_usbhs_platform_info usbhs_info = {
273 	.platform_callback = {
274 		.get_id		= usbhs_get_id,
275 		.phy_reset	= usbhs_phy_reset,
276 	},
277 	.driver_param = {
278 		.buswait_bwait		= 4,
279 		.detection_delay	= 5,
280 		.d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
281 		.d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
282 		.d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
283 		.d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
284 	},
285 };
286 
287 static struct resource usbhs_resources[] = {
288 	[0] = {
289 		.start	= 0xa4d90000,
290 		.end	= 0xa4d90124 - 1,
291 		.flags	= IORESOURCE_MEM,
292 	},
293 	[1] = {
294 		.start	= evt2irq(0xa40),
295 		.end	= evt2irq(0xa40),
296 		.flags	= IORESOURCE_IRQ,
297 	},
298 };
299 
300 static struct platform_device usbhs_device = {
301 	.name	= "renesas_usbhs",
302 	.id	= 1,
303 	.dev = {
304 		.dma_mask		= NULL,         /*  not use dma */
305 		.coherent_dma_mask	= 0xffffffff,
306 		.platform_data		= &usbhs_info,
307 	},
308 	.num_resources	= ARRAY_SIZE(usbhs_resources),
309 	.resource	= usbhs_resources,
310 };
311 
312 /* LCDC and backlight */
313 static const struct fb_videomode ecovec_lcd_modes[] = {
314 	{
315 		.name		= "Panel",
316 		.xres		= 800,
317 		.yres		= 480,
318 		.left_margin	= 220,
319 		.right_margin	= 110,
320 		.hsync_len	= 70,
321 		.upper_margin	= 20,
322 		.lower_margin	= 5,
323 		.vsync_len	= 5,
324 		.sync		= 0, /* hsync and vsync are active low */
325 	},
326 };
327 
328 static const struct fb_videomode ecovec_dvi_modes[] = {
329 	{
330 		.name		= "DVI",
331 		.xres		= 1280,
332 		.yres		= 720,
333 		.left_margin	= 220,
334 		.right_margin	= 110,
335 		.hsync_len	= 40,
336 		.upper_margin	= 20,
337 		.lower_margin	= 5,
338 		.vsync_len	= 5,
339 		.sync = 0, /* hsync and vsync are active low */
340 	},
341 };
342 
343 static struct sh_mobile_lcdc_info lcdc_info = {
344 	.ch[0] = {
345 		.interface_type = RGB18,
346 		.chan = LCDC_CHAN_MAINLCD,
347 		.fourcc = V4L2_PIX_FMT_RGB565,
348 		.panel_cfg = { /* 7.0 inch */
349 			.width = 152,
350 			.height = 91,
351 		},
352 	}
353 };
354 
355 static struct resource lcdc_resources[] = {
356 	[0] = {
357 		.name	= "LCDC",
358 		.start	= 0xfe940000,
359 		.end	= 0xfe942fff,
360 		.flags	= IORESOURCE_MEM,
361 	},
362 	[1] = {
363 		.start	= evt2irq(0xf40),
364 		.flags	= IORESOURCE_IRQ,
365 	},
366 };
367 
368 static struct platform_device lcdc_device = {
369 	.name		= "sh_mobile_lcdc_fb",
370 	.num_resources	= ARRAY_SIZE(lcdc_resources),
371 	.resource	= lcdc_resources,
372 	.dev		= {
373 		.platform_data	= &lcdc_info,
374 	},
375 };
376 
377 static struct gpio_backlight_platform_data gpio_backlight_data = {
378 	.fbdev = &lcdc_device.dev,
379 	.gpio = GPIO_PTR1,
380 	.def_value = 1,
381 	.name = "backlight",
382 };
383 
384 static struct platform_device gpio_backlight_device = {
385 	.name = "gpio-backlight",
386 	.dev = {
387 		.platform_data = &gpio_backlight_data,
388 	},
389 };
390 
391 /* CEU0 */
392 static struct ceu_platform_data ceu0_pdata = {
393 	.num_subdevs			= 2,
394 	.subdevs = {
395 		{ /* [0] = mt9t112  */
396 			.flags		= 0,
397 			.bus_width	= 8,
398 			.bus_shift	= 0,
399 			.i2c_adapter_id	= 0,
400 			.i2c_address	= 0x3c,
401 		},
402 		{ /* [1] = tw9910  */
403 			.flags		= 0,
404 			.bus_width	= 8,
405 			.bus_shift	= 0,
406 			.i2c_adapter_id	= 0,
407 			.i2c_address	= 0x45,
408 		},
409 	},
410 };
411 
412 static struct resource ceu0_resources[] = {
413 	[0] = {
414 		.name	= "CEU0",
415 		.start	= 0xfe910000,
416 		.end	= 0xfe91009f,
417 		.flags	= IORESOURCE_MEM,
418 	},
419 	[1] = {
420 		.start  = evt2irq(0x880),
421 		.flags  = IORESOURCE_IRQ,
422 	},
423 };
424 
425 static struct platform_device ceu0_device = {
426 	.name		= "renesas-ceu",
427 	.id             = 0, /* ceu.0 */
428 	.num_resources	= ARRAY_SIZE(ceu0_resources),
429 	.resource	= ceu0_resources,
430 	.dev	= {
431 		.platform_data	= &ceu0_pdata,
432 	},
433 };
434 
435 /* CEU1 */
436 static struct ceu_platform_data ceu1_pdata = {
437 	.num_subdevs			= 1,
438 	.subdevs = {
439 		{ /* [0] = mt9t112  */
440 			.flags		= 0,
441 			.bus_width	= 8,
442 			.bus_shift	= 0,
443 			.i2c_adapter_id	= 1,
444 			.i2c_address	= 0x3c,
445 		},
446 	},
447 };
448 
449 static struct resource ceu1_resources[] = {
450 	[0] = {
451 		.name	= "CEU1",
452 		.start	= 0xfe914000,
453 		.end	= 0xfe91409f,
454 		.flags	= IORESOURCE_MEM,
455 	},
456 	[1] = {
457 		.start  = evt2irq(0x9e0),
458 		.flags  = IORESOURCE_IRQ,
459 	},
460 };
461 
462 static struct platform_device ceu1_device = {
463 	.name		= "renesas-ceu",
464 	.id             = 1, /* ceu.1 */
465 	.num_resources	= ARRAY_SIZE(ceu1_resources),
466 	.resource	= ceu1_resources,
467 	.dev	= {
468 		.platform_data	= &ceu1_pdata,
469 	},
470 };
471 
472 /* Power up/down GPIOs for camera devices and video decoder */
473 static struct gpiod_lookup_table tw9910_gpios = {
474 	.dev_id		= "0-0045",
475 	.table		= {
476 		GPIO_LOOKUP("sh7724_pfc", GPIO_PTU2, "pdn", GPIO_ACTIVE_HIGH),
477 	},
478 };
479 
480 static struct gpiod_lookup_table mt9t112_0_gpios = {
481 	.dev_id		= "0-003c",
482 	.table		= {
483 		GPIO_LOOKUP("sh7724_pfc", GPIO_PTA3, "standby",
484 			    GPIO_ACTIVE_HIGH),
485 	},
486 };
487 
488 static struct gpiod_lookup_table mt9t112_1_gpios = {
489 	.dev_id		= "1-003c",
490 	.table		= {
491 		GPIO_LOOKUP("sh7724_pfc", GPIO_PTA4, "standby",
492 			    GPIO_ACTIVE_HIGH),
493 	},
494 };
495 
496 /* I2C device */
497 static struct tw9910_video_info tw9910_info = {
498 	.buswidth	= 8,
499 	.mpout		= TW9910_MPO_FIELD,
500 };
501 
502 static struct mt9t112_platform_data mt9t112_0_pdata = {
503 	.flags = MT9T112_FLAG_PCLK_RISING_EDGE,
504 	.divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
505 };
506 
507 static struct mt9t112_platform_data mt9t112_1_pdata = {
508 	.flags = MT9T112_FLAG_PCLK_RISING_EDGE,
509 	.divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
510 };
511 
512 static struct i2c_board_info i2c0_devices[] = {
513 	{
514 		I2C_BOARD_INFO("da7210", 0x1a),
515 	},
516 	{
517 		I2C_BOARD_INFO("tw9910", 0x45),
518 		.platform_data = &tw9910_info,
519 	},
520 	{
521 		/* 1st camera */
522 		I2C_BOARD_INFO("mt9t112", 0x3c),
523 		.platform_data = &mt9t112_0_pdata,
524 	},
525 };
526 
527 static struct i2c_board_info i2c1_devices[] = {
528 	{
529 		I2C_BOARD_INFO("r2025sd", 0x32),
530 	},
531 	{
532 		I2C_BOARD_INFO("lis3lv02d", 0x1c),
533 		.irq = evt2irq(0x620),
534 	},
535 	{
536 		/* 2nd camera */
537 		I2C_BOARD_INFO("mt9t112", 0x3c),
538 		.platform_data = &mt9t112_1_pdata,
539 	},
540 };
541 
542 /* KEYSC */
543 static struct sh_keysc_info keysc_info = {
544 	.mode		= SH_KEYSC_MODE_1,
545 	.scan_timing	= 3,
546 	.delay		= 50,
547 	.kycr2_delay	= 100,
548 	.keycodes	= { KEY_1, 0, 0, 0, 0,
549 			    KEY_2, 0, 0, 0, 0,
550 			    KEY_3, 0, 0, 0, 0,
551 			    KEY_4, 0, 0, 0, 0,
552 			    KEY_5, 0, 0, 0, 0,
553 			    KEY_6, 0, 0, 0, 0, },
554 };
555 
556 static struct resource keysc_resources[] = {
557 	[0] = {
558 		.name	= "KEYSC",
559 		.start  = 0x044b0000,
560 		.end    = 0x044b000f,
561 		.flags  = IORESOURCE_MEM,
562 	},
563 	[1] = {
564 		.start  = evt2irq(0xbe0),
565 		.flags  = IORESOURCE_IRQ,
566 	},
567 };
568 
569 static struct platform_device keysc_device = {
570 	.name           = "sh_keysc",
571 	.id             = 0, /* keysc0 clock */
572 	.num_resources  = ARRAY_SIZE(keysc_resources),
573 	.resource       = keysc_resources,
574 	.dev	= {
575 		.platform_data	= &keysc_info,
576 	},
577 };
578 
579 /* TouchScreen */
580 #define IRQ0 evt2irq(0x600)
581 
582 static int ts_get_pendown_state(struct device *dev)
583 {
584 	int val = 0;
585 	gpio_free(GPIO_FN_INTC_IRQ0);
586 	gpio_request(GPIO_PTZ0, NULL);
587 	gpio_direction_input(GPIO_PTZ0);
588 
589 	val = gpio_get_value(GPIO_PTZ0);
590 
591 	gpio_free(GPIO_PTZ0);
592 	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
593 
594 	return val ? 0 : 1;
595 }
596 
597 static int ts_init(void)
598 {
599 	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
600 	return 0;
601 }
602 
603 static struct tsc2007_platform_data tsc2007_info = {
604 	.model			= 2007,
605 	.x_plate_ohms		= 180,
606 	.get_pendown_state	= ts_get_pendown_state,
607 	.init_platform_hw	= ts_init,
608 };
609 
610 static struct i2c_board_info ts_i2c_clients = {
611 	I2C_BOARD_INFO("tsc2007", 0x48),
612 	.type		= "tsc2007",
613 	.platform_data	= &tsc2007_info,
614 	.irq		= IRQ0,
615 };
616 
617 static struct regulator_consumer_supply cn12_power_consumers[] =
618 {
619 	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
620 	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
621 	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
622 	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
623 };
624 
625 static struct regulator_init_data cn12_power_init_data = {
626 	.constraints = {
627 		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
628 	},
629 	.num_consumer_supplies  = ARRAY_SIZE(cn12_power_consumers),
630 	.consumer_supplies      = cn12_power_consumers,
631 };
632 
633 static struct fixed_voltage_config cn12_power_info = {
634 	.supply_name = "CN12 SD/MMC Vdd",
635 	.microvolts = 3300000,
636 	.gpio = GPIO_PTB7,
637 	.enable_high = 1,
638 	.init_data = &cn12_power_init_data,
639 };
640 
641 static struct platform_device cn12_power = {
642 	.name = "reg-fixed-voltage",
643 	.id   = 0,
644 	.dev  = {
645 		.platform_data = &cn12_power_info,
646 	},
647 };
648 
649 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
650 /* SDHI0 */
651 static struct regulator_consumer_supply sdhi0_power_consumers[] =
652 {
653 	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
654 	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
655 };
656 
657 static struct regulator_init_data sdhi0_power_init_data = {
658 	.constraints = {
659 		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
660 	},
661 	.num_consumer_supplies  = ARRAY_SIZE(sdhi0_power_consumers),
662 	.consumer_supplies      = sdhi0_power_consumers,
663 };
664 
665 static struct fixed_voltage_config sdhi0_power_info = {
666 	.supply_name = "CN11 SD/MMC Vdd",
667 	.microvolts = 3300000,
668 	.gpio = GPIO_PTB6,
669 	.enable_high = 1,
670 	.init_data = &sdhi0_power_init_data,
671 };
672 
673 static struct platform_device sdhi0_power = {
674 	.name = "reg-fixed-voltage",
675 	.id   = 1,
676 	.dev  = {
677 		.platform_data = &sdhi0_power_info,
678 	},
679 };
680 
681 static struct tmio_mmc_data sdhi0_info = {
682 	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
683 	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
684 	.capabilities	= MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
685 			  MMC_CAP_NEEDS_POLL,
686 	.flags		= TMIO_MMC_USE_GPIO_CD,
687 	.cd_gpio	= GPIO_PTY7,
688 };
689 
690 static struct resource sdhi0_resources[] = {
691 	[0] = {
692 		.name	= "SDHI0",
693 		.start  = 0x04ce0000,
694 		.end    = 0x04ce00ff,
695 		.flags  = IORESOURCE_MEM,
696 	},
697 	[1] = {
698 		.start  = evt2irq(0xe80),
699 		.flags  = IORESOURCE_IRQ,
700 	},
701 };
702 
703 static struct platform_device sdhi0_device = {
704 	.name           = "sh_mobile_sdhi",
705 	.num_resources  = ARRAY_SIZE(sdhi0_resources),
706 	.resource       = sdhi0_resources,
707 	.id             = 0,
708 	.dev	= {
709 		.platform_data	= &sdhi0_info,
710 	},
711 };
712 
713 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
714 /* SDHI1 */
715 static struct tmio_mmc_data sdhi1_info = {
716 	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI1_TX,
717 	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI1_RX,
718 	.capabilities	= MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
719 			  MMC_CAP_NEEDS_POLL,
720 	.flags		= TMIO_MMC_USE_GPIO_CD,
721 	.cd_gpio	= GPIO_PTW7,
722 };
723 
724 static struct resource sdhi1_resources[] = {
725 	[0] = {
726 		.name	= "SDHI1",
727 		.start  = 0x04cf0000,
728 		.end    = 0x04cf00ff,
729 		.flags  = IORESOURCE_MEM,
730 	},
731 	[1] = {
732 		.start  = evt2irq(0x4e0),
733 		.flags  = IORESOURCE_IRQ,
734 	},
735 };
736 
737 static struct platform_device sdhi1_device = {
738 	.name           = "sh_mobile_sdhi",
739 	.num_resources  = ARRAY_SIZE(sdhi1_resources),
740 	.resource       = sdhi1_resources,
741 	.id             = 1,
742 	.dev	= {
743 		.platform_data	= &sdhi1_info,
744 	},
745 };
746 #endif /* CONFIG_MMC_SH_MMCIF */
747 
748 #else
749 
750 /* MMC SPI */
751 static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
752 {
753 	gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
754 }
755 
756 static struct mmc_spi_platform_data mmc_spi_info = {
757 	.caps = MMC_CAP_NEEDS_POLL,
758 	.caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
759 	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
760 	.setpower = mmc_spi_setpower,
761 	.flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO,
762 	.cd_gpio = GPIO_PTY7,
763 	.ro_gpio = GPIO_PTY6,
764 };
765 
766 static struct spi_board_info spi_bus[] = {
767 	{
768 		.modalias	= "mmc_spi",
769 		.platform_data	= &mmc_spi_info,
770 		.max_speed_hz	= 5000000,
771 		.mode		= SPI_MODE_0,
772 		.controller_data = (void *) GPIO_PTM4,
773 	},
774 };
775 
776 /* MSIOF0 */
777 static struct sh_msiof_spi_info msiof0_data = {
778 	.num_chipselect = 1,
779 };
780 
781 static struct resource msiof0_resources[] = {
782 	[0] = {
783 		.name	= "MSIOF0",
784 		.start	= 0xa4c40000,
785 		.end	= 0xa4c40063,
786 		.flags	= IORESOURCE_MEM,
787 	},
788 	[1] = {
789 		.start	= evt2irq(0xc80),
790 		.flags	= IORESOURCE_IRQ,
791 	},
792 };
793 
794 static struct platform_device msiof0_device = {
795 	.name		= "spi_sh_msiof",
796 	.id		= 0, /* MSIOF0 */
797 	.dev = {
798 		.platform_data = &msiof0_data,
799 	},
800 	.num_resources	= ARRAY_SIZE(msiof0_resources),
801 	.resource	= msiof0_resources,
802 };
803 
804 #endif
805 
806 /* FSI */
807 static struct resource fsi_resources[] = {
808 	[0] = {
809 		.name	= "FSI",
810 		.start	= 0xFE3C0000,
811 		.end	= 0xFE3C021d,
812 		.flags	= IORESOURCE_MEM,
813 	},
814 	[1] = {
815 		.start  = evt2irq(0xf80),
816 		.flags  = IORESOURCE_IRQ,
817 	},
818 };
819 
820 static struct platform_device fsi_device = {
821 	.name		= "sh_fsi",
822 	.id		= 0,
823 	.num_resources	= ARRAY_SIZE(fsi_resources),
824 	.resource	= fsi_resources,
825 };
826 
827 static struct asoc_simple_card_info fsi_da7210_info = {
828 	.name		= "DA7210",
829 	.card		= "FSIB-DA7210",
830 	.codec		= "da7210.0-001a",
831 	.platform	= "sh_fsi.0",
832 	.daifmt		= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
833 	.cpu_dai = {
834 		.name	= "fsib-dai",
835 	},
836 	.codec_dai = {
837 		.name	= "da7210-hifi",
838 	},
839 };
840 
841 static struct platform_device fsi_da7210_device = {
842 	.name	= "asoc-simple-card",
843 	.dev	= {
844 		.platform_data	= &fsi_da7210_info,
845 		.coherent_dma_mask = DMA_BIT_MASK(32),
846 		.dma_mask = &fsi_da7210_device.dev.coherent_dma_mask,
847 	},
848 };
849 
850 
851 /* IrDA */
852 static struct resource irda_resources[] = {
853 	[0] = {
854 		.name	= "IrDA",
855 		.start  = 0xA45D0000,
856 		.end    = 0xA45D0049,
857 		.flags  = IORESOURCE_MEM,
858 	},
859 	[1] = {
860 		.start  = evt2irq(0x480),
861 		.flags  = IORESOURCE_IRQ,
862 	},
863 };
864 
865 static struct platform_device irda_device = {
866 	.name           = "sh_sir",
867 	.num_resources  = ARRAY_SIZE(irda_resources),
868 	.resource       = irda_resources,
869 };
870 
871 #include <media/i2c/ak881x.h>
872 #include <media/drv-intf/sh_vou.h>
873 
874 static struct ak881x_pdata ak881x_pdata = {
875 	.flags = AK881X_IF_MODE_SLAVE,
876 };
877 
878 static struct i2c_board_info ak8813 = {
879 	I2C_BOARD_INFO("ak8813", 0x20),
880 	.platform_data = &ak881x_pdata,
881 };
882 
883 static struct sh_vou_pdata sh_vou_pdata = {
884 	.bus_fmt	= SH_VOU_BUS_8BIT,
885 	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
886 	.board_info	= &ak8813,
887 	.i2c_adap	= 0,
888 };
889 
890 static struct resource sh_vou_resources[] = {
891 	[0] = {
892 		.start  = 0xfe960000,
893 		.end    = 0xfe962043,
894 		.flags  = IORESOURCE_MEM,
895 	},
896 	[1] = {
897 		.start  = evt2irq(0x8e0),
898 		.flags  = IORESOURCE_IRQ,
899 	},
900 };
901 
902 static struct platform_device vou_device = {
903 	.name           = "sh-vou",
904 	.id		= -1,
905 	.num_resources  = ARRAY_SIZE(sh_vou_resources),
906 	.resource       = sh_vou_resources,
907 	.dev		= {
908 		.platform_data	= &sh_vou_pdata,
909 	},
910 };
911 
912 #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
913 /* SH_MMCIF */
914 static struct resource sh_mmcif_resources[] = {
915 	[0] = {
916 		.name	= "SH_MMCIF",
917 		.start	= 0xA4CA0000,
918 		.end	= 0xA4CA00FF,
919 		.flags	= IORESOURCE_MEM,
920 	},
921 	[1] = {
922 		/* MMC2I */
923 		.start	= evt2irq(0x5a0),
924 		.flags	= IORESOURCE_IRQ,
925 	},
926 	[2] = {
927 		/* MMC3I */
928 		.start	= evt2irq(0x5c0),
929 		.flags	= IORESOURCE_IRQ,
930 	},
931 };
932 
933 static struct sh_mmcif_plat_data sh_mmcif_plat = {
934 	.sup_pclk	= 0, /* SH7724: Max Pclk/2 */
935 	.caps		= MMC_CAP_4_BIT_DATA |
936 			  MMC_CAP_8_BIT_DATA |
937 			  MMC_CAP_NEEDS_POLL,
938 	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
939 };
940 
941 static struct platform_device sh_mmcif_device = {
942 	.name		= "sh_mmcif",
943 	.id		= 0,
944 	.dev		= {
945 		.platform_data		= &sh_mmcif_plat,
946 	},
947 	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
948 	.resource	= sh_mmcif_resources,
949 };
950 #endif
951 
952 static struct platform_device *ecovec_ceu_devices[] __initdata = {
953 	&ceu0_device,
954 	&ceu1_device,
955 };
956 
957 static struct platform_device *ecovec_devices[] __initdata = {
958 	&heartbeat_device,
959 	&nor_flash_device,
960 	&sh_eth_device,
961 	&usb0_host_device,
962 	&usb1_common_device,
963 	&usbhs_device,
964 	&lcdc_device,
965 	&gpio_backlight_device,
966 	&keysc_device,
967 	&cn12_power,
968 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
969 	&sdhi0_power,
970 	&sdhi0_device,
971 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
972 	&sdhi1_device,
973 #endif
974 #else
975 	&msiof0_device,
976 #endif
977 	&fsi_device,
978 	&fsi_da7210_device,
979 	&irda_device,
980 	&vou_device,
981 #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
982 	&sh_mmcif_device,
983 #endif
984 };
985 
986 #ifdef CONFIG_I2C
987 #define EEPROM_ADDR 0x50
988 static u8 mac_read(struct i2c_adapter *a, u8 command)
989 {
990 	struct i2c_msg msg[2];
991 	u8 buf;
992 	int ret;
993 
994 	msg[0].addr  = EEPROM_ADDR;
995 	msg[0].flags = 0;
996 	msg[0].len   = 1;
997 	msg[0].buf   = &command;
998 
999 	msg[1].addr  = EEPROM_ADDR;
1000 	msg[1].flags = I2C_M_RD;
1001 	msg[1].len   = 1;
1002 	msg[1].buf   = &buf;
1003 
1004 	ret = i2c_transfer(a, msg, 2);
1005 	if (ret < 0) {
1006 		printk(KERN_ERR "error %d\n", ret);
1007 		buf = 0xff;
1008 	}
1009 
1010 	return buf;
1011 }
1012 
1013 static void __init sh_eth_init(struct sh_eth_plat_data *pd)
1014 {
1015 	struct i2c_adapter *a = i2c_get_adapter(1);
1016 	int i;
1017 
1018 	if (!a) {
1019 		pr_err("can not get I2C 1\n");
1020 		return;
1021 	}
1022 
1023 	/* read MAC address from EEPROM */
1024 	for (i = 0; i < sizeof(pd->mac_addr); i++) {
1025 		pd->mac_addr[i] = mac_read(a, 0x10 + i);
1026 		msleep(10);
1027 	}
1028 
1029 	i2c_put_adapter(a);
1030 }
1031 #else
1032 static void __init sh_eth_init(struct sh_eth_plat_data *pd)
1033 {
1034 	pr_err("unable to read sh_eth MAC address\n");
1035 }
1036 #endif
1037 
1038 #define PORT_HIZA 0xA4050158
1039 #define IODRIVEA  0xA405018A
1040 
1041 extern char ecovec24_sdram_enter_start;
1042 extern char ecovec24_sdram_enter_end;
1043 extern char ecovec24_sdram_leave_start;
1044 extern char ecovec24_sdram_leave_end;
1045 
1046 static int __init arch_setup(void)
1047 {
1048 	struct clk *clk;
1049 	bool cn12_enabled = false;
1050 
1051 	/* register board specific self-refresh code */
1052 	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
1053 					SUSP_SH_RSTANDBY,
1054 					&ecovec24_sdram_enter_start,
1055 					&ecovec24_sdram_enter_end,
1056 					&ecovec24_sdram_leave_start,
1057 					&ecovec24_sdram_leave_end);
1058 
1059 	/* enable STATUS0, STATUS2 and PDSTATUS */
1060 	gpio_request(GPIO_FN_STATUS0, NULL);
1061 	gpio_request(GPIO_FN_STATUS2, NULL);
1062 	gpio_request(GPIO_FN_PDSTATUS, NULL);
1063 
1064 	/* enable SCIFA0 */
1065 	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
1066 	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
1067 
1068 	/* enable debug LED */
1069 	gpio_request(GPIO_PTG0, NULL);
1070 	gpio_request(GPIO_PTG1, NULL);
1071 	gpio_request(GPIO_PTG2, NULL);
1072 	gpio_request(GPIO_PTG3, NULL);
1073 	gpio_direction_output(GPIO_PTG0, 0);
1074 	gpio_direction_output(GPIO_PTG1, 0);
1075 	gpio_direction_output(GPIO_PTG2, 0);
1076 	gpio_direction_output(GPIO_PTG3, 0);
1077 	__raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
1078 
1079 	/* enable SH-Eth */
1080 	gpio_request(GPIO_PTA1, NULL);
1081 	gpio_direction_output(GPIO_PTA1, 1);
1082 	mdelay(20);
1083 
1084 	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
1085 	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
1086 	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
1087 	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
1088 	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
1089 	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
1090 	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
1091 	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
1092 	gpio_request(GPIO_FN_MDIO,         NULL);
1093 	gpio_request(GPIO_FN_MDC,          NULL);
1094 	gpio_request(GPIO_FN_LNKSTA,       NULL);
1095 
1096 	/* enable USB */
1097 	__raw_writew(0x0000, 0xA4D80000);
1098 	__raw_writew(0x0000, 0xA4D90000);
1099 	gpio_request(GPIO_PTB3,  NULL);
1100 	gpio_request(GPIO_PTB4,  NULL);
1101 	gpio_request(GPIO_PTB5,  NULL);
1102 	gpio_direction_input(GPIO_PTB3);
1103 	gpio_direction_output(GPIO_PTB4, 0);
1104 	gpio_direction_output(GPIO_PTB5, 0);
1105 	__raw_writew(0x0600, 0xa40501d4);
1106 	__raw_writew(0x0600, 0xa4050192);
1107 
1108 	if (gpio_get_value(GPIO_PTB3)) {
1109 		printk(KERN_INFO "USB1 function is selected\n");
1110 		usb1_common_device.name = "r8a66597_udc";
1111 	} else {
1112 		printk(KERN_INFO "USB1 host is selected\n");
1113 		usb1_common_device.name = "r8a66597_hcd";
1114 	}
1115 
1116 	/* enable LCDC */
1117 	gpio_request(GPIO_FN_LCDD23,   NULL);
1118 	gpio_request(GPIO_FN_LCDD22,   NULL);
1119 	gpio_request(GPIO_FN_LCDD21,   NULL);
1120 	gpio_request(GPIO_FN_LCDD20,   NULL);
1121 	gpio_request(GPIO_FN_LCDD19,   NULL);
1122 	gpio_request(GPIO_FN_LCDD18,   NULL);
1123 	gpio_request(GPIO_FN_LCDD17,   NULL);
1124 	gpio_request(GPIO_FN_LCDD16,   NULL);
1125 	gpio_request(GPIO_FN_LCDD15,   NULL);
1126 	gpio_request(GPIO_FN_LCDD14,   NULL);
1127 	gpio_request(GPIO_FN_LCDD13,   NULL);
1128 	gpio_request(GPIO_FN_LCDD12,   NULL);
1129 	gpio_request(GPIO_FN_LCDD11,   NULL);
1130 	gpio_request(GPIO_FN_LCDD10,   NULL);
1131 	gpio_request(GPIO_FN_LCDD9,    NULL);
1132 	gpio_request(GPIO_FN_LCDD8,    NULL);
1133 	gpio_request(GPIO_FN_LCDD7,    NULL);
1134 	gpio_request(GPIO_FN_LCDD6,    NULL);
1135 	gpio_request(GPIO_FN_LCDD5,    NULL);
1136 	gpio_request(GPIO_FN_LCDD4,    NULL);
1137 	gpio_request(GPIO_FN_LCDD3,    NULL);
1138 	gpio_request(GPIO_FN_LCDD2,    NULL);
1139 	gpio_request(GPIO_FN_LCDD1,    NULL);
1140 	gpio_request(GPIO_FN_LCDD0,    NULL);
1141 	gpio_request(GPIO_FN_LCDDISP,  NULL);
1142 	gpio_request(GPIO_FN_LCDHSYN,  NULL);
1143 	gpio_request(GPIO_FN_LCDDCK,   NULL);
1144 	gpio_request(GPIO_FN_LCDVSYN,  NULL);
1145 	gpio_request(GPIO_FN_LCDDON,   NULL);
1146 	gpio_request(GPIO_FN_LCDLCLK,  NULL);
1147 	__raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
1148 
1149 	gpio_request(GPIO_PTE6, NULL);
1150 	gpio_request(GPIO_PTU1, NULL);
1151 	gpio_request(GPIO_PTA2, NULL);
1152 	gpio_direction_input(GPIO_PTE6);
1153 	gpio_direction_output(GPIO_PTU1, 0);
1154 	gpio_direction_output(GPIO_PTA2, 0);
1155 
1156 	/* I/O buffer drive ability is high */
1157 	__raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
1158 
1159 	if (gpio_get_value(GPIO_PTE6)) {
1160 		/* DVI */
1161 		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
1162 		lcdc_info.ch[0].clock_divider		= 1;
1163 		lcdc_info.ch[0].lcd_modes		= ecovec_dvi_modes;
1164 		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_dvi_modes);
1165 
1166 		/* No backlight */
1167 		gpio_backlight_data.fbdev = NULL;
1168 
1169 		gpio_set_value(GPIO_PTA2, 1);
1170 		gpio_set_value(GPIO_PTU1, 1);
1171 	} else {
1172 		/* Panel */
1173 		lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
1174 		lcdc_info.ch[0].clock_divider		= 2;
1175 		lcdc_info.ch[0].lcd_modes		= ecovec_lcd_modes;
1176 		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_lcd_modes);
1177 
1178 		/* FIXME
1179 		 *
1180 		 * LCDDON control is needed for Panel,
1181 		 * but current sh_mobile_lcdc driver doesn't control it.
1182 		 * It is temporary correspondence
1183 		 */
1184 		gpio_request(GPIO_PTF4, NULL);
1185 		gpio_direction_output(GPIO_PTF4, 1);
1186 
1187 		/* enable TouchScreen */
1188 		i2c_register_board_info(0, &ts_i2c_clients, 1);
1189 		irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
1190 	}
1191 
1192 	/* enable CEU0 */
1193 	gpio_request(GPIO_FN_VIO0_D15, NULL);
1194 	gpio_request(GPIO_FN_VIO0_D14, NULL);
1195 	gpio_request(GPIO_FN_VIO0_D13, NULL);
1196 	gpio_request(GPIO_FN_VIO0_D12, NULL);
1197 	gpio_request(GPIO_FN_VIO0_D11, NULL);
1198 	gpio_request(GPIO_FN_VIO0_D10, NULL);
1199 	gpio_request(GPIO_FN_VIO0_D9,  NULL);
1200 	gpio_request(GPIO_FN_VIO0_D8,  NULL);
1201 	gpio_request(GPIO_FN_VIO0_D7,  NULL);
1202 	gpio_request(GPIO_FN_VIO0_D6,  NULL);
1203 	gpio_request(GPIO_FN_VIO0_D5,  NULL);
1204 	gpio_request(GPIO_FN_VIO0_D4,  NULL);
1205 	gpio_request(GPIO_FN_VIO0_D3,  NULL);
1206 	gpio_request(GPIO_FN_VIO0_D2,  NULL);
1207 	gpio_request(GPIO_FN_VIO0_D1,  NULL);
1208 	gpio_request(GPIO_FN_VIO0_D0,  NULL);
1209 	gpio_request(GPIO_FN_VIO0_VD,  NULL);
1210 	gpio_request(GPIO_FN_VIO0_CLK, NULL);
1211 	gpio_request(GPIO_FN_VIO0_FLD, NULL);
1212 	gpio_request(GPIO_FN_VIO0_HD,  NULL);
1213 
1214 	/* enable CEU1 */
1215 	gpio_request(GPIO_FN_VIO1_D7,  NULL);
1216 	gpio_request(GPIO_FN_VIO1_D6,  NULL);
1217 	gpio_request(GPIO_FN_VIO1_D5,  NULL);
1218 	gpio_request(GPIO_FN_VIO1_D4,  NULL);
1219 	gpio_request(GPIO_FN_VIO1_D3,  NULL);
1220 	gpio_request(GPIO_FN_VIO1_D2,  NULL);
1221 	gpio_request(GPIO_FN_VIO1_D1,  NULL);
1222 	gpio_request(GPIO_FN_VIO1_D0,  NULL);
1223 	gpio_request(GPIO_FN_VIO1_FLD, NULL);
1224 	gpio_request(GPIO_FN_VIO1_HD,  NULL);
1225 	gpio_request(GPIO_FN_VIO1_VD,  NULL);
1226 	gpio_request(GPIO_FN_VIO1_CLK, NULL);
1227 
1228 	/* enable KEYSC */
1229 	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
1230 	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
1231 	gpio_request(GPIO_FN_KEYOUT3,     NULL);
1232 	gpio_request(GPIO_FN_KEYOUT2,     NULL);
1233 	gpio_request(GPIO_FN_KEYOUT1,     NULL);
1234 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
1235 	gpio_request(GPIO_FN_KEYIN0,      NULL);
1236 
1237 	/* enable user debug switch */
1238 	gpio_request(GPIO_PTR0, NULL);
1239 	gpio_request(GPIO_PTR4, NULL);
1240 	gpio_request(GPIO_PTR5, NULL);
1241 	gpio_request(GPIO_PTR6, NULL);
1242 	gpio_direction_input(GPIO_PTR0);
1243 	gpio_direction_input(GPIO_PTR4);
1244 	gpio_direction_input(GPIO_PTR5);
1245 	gpio_direction_input(GPIO_PTR6);
1246 
1247 	/* SD-card slot CN11 */
1248 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
1249 	/* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
1250 	gpio_request(GPIO_FN_SDHI0WP,  NULL);
1251 	gpio_request(GPIO_FN_SDHI0CMD, NULL);
1252 	gpio_request(GPIO_FN_SDHI0CLK, NULL);
1253 	gpio_request(GPIO_FN_SDHI0D3,  NULL);
1254 	gpio_request(GPIO_FN_SDHI0D2,  NULL);
1255 	gpio_request(GPIO_FN_SDHI0D1,  NULL);
1256 	gpio_request(GPIO_FN_SDHI0D0,  NULL);
1257 #else
1258 	/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
1259 	gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
1260 	gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
1261 	gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
1262 	gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */
1263 	gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
1264 	gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
1265 	gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
1266 
1267 	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
1268 #endif
1269 
1270 	/* MMC/SD-card slot CN12 */
1271 #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
1272 	/* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
1273 	gpio_request(GPIO_FN_MMC_D7, NULL);
1274 	gpio_request(GPIO_FN_MMC_D6, NULL);
1275 	gpio_request(GPIO_FN_MMC_D5, NULL);
1276 	gpio_request(GPIO_FN_MMC_D4, NULL);
1277 	gpio_request(GPIO_FN_MMC_D3, NULL);
1278 	gpio_request(GPIO_FN_MMC_D2, NULL);
1279 	gpio_request(GPIO_FN_MMC_D1, NULL);
1280 	gpio_request(GPIO_FN_MMC_D0, NULL);
1281 	gpio_request(GPIO_FN_MMC_CLK, NULL);
1282 	gpio_request(GPIO_FN_MMC_CMD, NULL);
1283 
1284 	cn12_enabled = true;
1285 #elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
1286 	/* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
1287 	gpio_request(GPIO_FN_SDHI1WP,  NULL);
1288 	gpio_request(GPIO_FN_SDHI1CMD, NULL);
1289 	gpio_request(GPIO_FN_SDHI1CLK, NULL);
1290 	gpio_request(GPIO_FN_SDHI1D3,  NULL);
1291 	gpio_request(GPIO_FN_SDHI1D2,  NULL);
1292 	gpio_request(GPIO_FN_SDHI1D1,  NULL);
1293 	gpio_request(GPIO_FN_SDHI1D0,  NULL);
1294 
1295 	cn12_enabled = true;
1296 #endif
1297 
1298 	if (cn12_enabled)
1299 		/* I/O buffer drive ability is high for CN12 */
1300 		__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000,
1301 			     IODRIVEA);
1302 
1303 	/* enable FSI */
1304 	gpio_request(GPIO_FN_FSIMCKB,    NULL);
1305 	gpio_request(GPIO_FN_FSIIBSD,    NULL);
1306 	gpio_request(GPIO_FN_FSIOBSD,    NULL);
1307 	gpio_request(GPIO_FN_FSIIBBCK,   NULL);
1308 	gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
1309 	gpio_request(GPIO_FN_FSIOBBCK,   NULL);
1310 	gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
1311 	gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
1312 
1313 	/* set SPU2 clock to 83.4 MHz */
1314 	clk = clk_get(NULL, "spu_clk");
1315 	if (!IS_ERR(clk)) {
1316 		clk_set_rate(clk, clk_round_rate(clk, 83333333));
1317 		clk_put(clk);
1318 	}
1319 
1320 	/* change parent of FSI B */
1321 	clk = clk_get(NULL, "fsib_clk");
1322 	if (!IS_ERR(clk)) {
1323 		/* 48kHz dummy clock was used to make sure 1/1 divide */
1324 		clk_set_rate(&sh7724_fsimckb_clk, 48000);
1325 		clk_set_parent(clk, &sh7724_fsimckb_clk);
1326 		clk_set_rate(clk, 48000);
1327 		clk_put(clk);
1328 	}
1329 
1330 	gpio_request(GPIO_PTU0, NULL);
1331 	gpio_direction_output(GPIO_PTU0, 0);
1332 	mdelay(20);
1333 
1334 	/* enable motion sensor */
1335 	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
1336 	gpio_direction_input(GPIO_FN_INTC_IRQ1);
1337 
1338 	/* set VPU clock to 166 MHz */
1339 	clk = clk_get(NULL, "vpu_clk");
1340 	if (!IS_ERR(clk)) {
1341 		clk_set_rate(clk, clk_round_rate(clk, 166000000));
1342 		clk_put(clk);
1343 	}
1344 
1345 	/* enable IrDA */
1346 	gpio_request(GPIO_FN_IRDA_OUT, NULL);
1347 	gpio_request(GPIO_FN_IRDA_IN,  NULL);
1348 	gpio_request(GPIO_PTU5, NULL);
1349 	gpio_direction_output(GPIO_PTU5, 0);
1350 
1351 	/* Register gpio lookup tables for cameras and video decoder */
1352 	gpiod_add_lookup_table(&tw9910_gpios);
1353 	gpiod_add_lookup_table(&mt9t112_0_gpios);
1354 	gpiod_add_lookup_table(&mt9t112_1_gpios);
1355 
1356 	/* enable I2C device */
1357 	i2c_register_board_info(0, i2c0_devices,
1358 				ARRAY_SIZE(i2c0_devices));
1359 
1360 	i2c_register_board_info(1, i2c1_devices,
1361 				ARRAY_SIZE(i2c1_devices));
1362 
1363 #if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
1364 	/* VOU */
1365 	gpio_request(GPIO_FN_DV_D15, NULL);
1366 	gpio_request(GPIO_FN_DV_D14, NULL);
1367 	gpio_request(GPIO_FN_DV_D13, NULL);
1368 	gpio_request(GPIO_FN_DV_D12, NULL);
1369 	gpio_request(GPIO_FN_DV_D11, NULL);
1370 	gpio_request(GPIO_FN_DV_D10, NULL);
1371 	gpio_request(GPIO_FN_DV_D9, NULL);
1372 	gpio_request(GPIO_FN_DV_D8, NULL);
1373 	gpio_request(GPIO_FN_DV_CLKI, NULL);
1374 	gpio_request(GPIO_FN_DV_CLK, NULL);
1375 	gpio_request(GPIO_FN_DV_VSYNC, NULL);
1376 	gpio_request(GPIO_FN_DV_HSYNC, NULL);
1377 
1378 	/* AK8813 power / reset sequence */
1379 	gpio_request(GPIO_PTG4, NULL);
1380 	gpio_request(GPIO_PTU3, NULL);
1381 	/* Reset */
1382 	gpio_direction_output(GPIO_PTG4, 0);
1383 	/* Power down */
1384 	gpio_direction_output(GPIO_PTU3, 1);
1385 
1386 	udelay(10);
1387 
1388 	/* Power up, reset */
1389 	gpio_set_value(GPIO_PTU3, 0);
1390 
1391 	udelay(10);
1392 
1393 	/* Remove reset */
1394 	gpio_set_value(GPIO_PTG4, 1);
1395 #endif
1396 
1397 	/* Initialize CEU platform devices separately to map memory first */
1398 	device_initialize(&ecovec_ceu_devices[0]->dev);
1399 	arch_setup_pdev_archdata(ecovec_ceu_devices[0]);
1400 	dma_declare_coherent_memory(&ecovec_ceu_devices[0]->dev,
1401 				    ceu0_dma_membase, ceu0_dma_membase,
1402 				    ceu0_dma_membase +
1403 				    CEU_BUFFER_MEMORY_SIZE - 1,
1404 				    DMA_MEMORY_EXCLUSIVE);
1405 	platform_device_add(ecovec_ceu_devices[0]);
1406 
1407 	device_initialize(&ecovec_ceu_devices[1]->dev);
1408 	arch_setup_pdev_archdata(ecovec_ceu_devices[1]);
1409 	dma_declare_coherent_memory(&ecovec_ceu_devices[1]->dev,
1410 				    ceu1_dma_membase, ceu1_dma_membase,
1411 				    ceu1_dma_membase +
1412 				    CEU_BUFFER_MEMORY_SIZE - 1,
1413 				    DMA_MEMORY_EXCLUSIVE);
1414 	platform_device_add(ecovec_ceu_devices[1]);
1415 
1416 	return platform_add_devices(ecovec_devices,
1417 				    ARRAY_SIZE(ecovec_devices));
1418 }
1419 arch_initcall(arch_setup);
1420 
1421 static int __init devices_setup(void)
1422 {
1423 	sh_eth_init(&sh_eth_plat);
1424 	return 0;
1425 }
1426 device_initcall(devices_setup);
1427 
1428 /* Reserve a portion of memory for CEU 0 and CEU 1 buffers */
1429 static void __init ecovec_mv_mem_reserve(void)
1430 {
1431 	phys_addr_t phys;
1432 	phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
1433 
1434 	phys = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_ALLOC_ANYWHERE);
1435 	memblock_free(phys, size);
1436 	memblock_remove(phys, size);
1437 	ceu0_dma_membase = phys;
1438 
1439 	phys = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_ALLOC_ANYWHERE);
1440 	memblock_free(phys, size);
1441 	memblock_remove(phys, size);
1442 	ceu1_dma_membase = phys;
1443 }
1444 
1445 static struct sh_machine_vector mv_ecovec __initmv = {
1446 	.mv_name	= "R0P7724 (EcoVec)",
1447 	.mv_mem_reserve	= ecovec_mv_mem_reserve,
1448 };
1449