1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Renesas Technology Corp. R0P7785LC0011RL Support. 4 * 5 * Copyright (C) 2008 Yoshihiro Shimoda 6 * Copyright (C) 2009 Paul Mundt 7 */ 8 #include <linux/init.h> 9 #include <linux/platform_device.h> 10 #include <linux/sm501.h> 11 #include <linux/sm501-regs.h> 12 #include <linux/fb.h> 13 #include <linux/mtd/physmap.h> 14 #include <linux/delay.h> 15 #include <linux/interrupt.h> 16 #include <linux/i2c.h> 17 #include <linux/platform_data/i2c-pca-platform.h> 18 #include <linux/i2c-algo-pca.h> 19 #include <linux/usb/r8a66597.h> 20 #include <linux/sh_intc.h> 21 #include <linux/irq.h> 22 #include <linux/io.h> 23 #include <linux/clk.h> 24 #include <linux/errno.h> 25 #include <linux/gpio/machine.h> 26 #include <mach/sh7785lcr.h> 27 #include <cpu/sh7785.h> 28 #include <asm/heartbeat.h> 29 #include <asm/clock.h> 30 #include <asm/bl_bit.h> 31 32 /* 33 * NOTE: This board has 2 physical memory maps. 34 * Please look at include/asm-sh/sh7785lcr.h or hardware manual. 35 */ 36 static struct resource heartbeat_resource = { 37 .start = PLD_LEDCR, 38 .end = PLD_LEDCR, 39 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, 40 }; 41 42 static struct platform_device heartbeat_device = { 43 .name = "heartbeat", 44 .id = -1, 45 .num_resources = 1, 46 .resource = &heartbeat_resource, 47 }; 48 49 static struct mtd_partition nor_flash_partitions[] = { 50 { 51 .name = "loader", 52 .offset = 0x00000000, 53 .size = 512 * 1024, 54 }, 55 { 56 .name = "bootenv", 57 .offset = MTDPART_OFS_APPEND, 58 .size = 512 * 1024, 59 }, 60 { 61 .name = "kernel", 62 .offset = MTDPART_OFS_APPEND, 63 .size = 4 * 1024 * 1024, 64 }, 65 { 66 .name = "data", 67 .offset = MTDPART_OFS_APPEND, 68 .size = MTDPART_SIZ_FULL, 69 }, 70 }; 71 72 static struct physmap_flash_data nor_flash_data = { 73 .width = 4, 74 .parts = nor_flash_partitions, 75 .nr_parts = ARRAY_SIZE(nor_flash_partitions), 76 }; 77 78 static struct resource nor_flash_resources[] = { 79 [0] = { 80 .start = NOR_FLASH_ADDR, 81 .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1, 82 .flags = IORESOURCE_MEM, 83 } 84 }; 85 86 static struct platform_device nor_flash_device = { 87 .name = "physmap-flash", 88 .dev = { 89 .platform_data = &nor_flash_data, 90 }, 91 .num_resources = ARRAY_SIZE(nor_flash_resources), 92 .resource = nor_flash_resources, 93 }; 94 95 static struct r8a66597_platdata r8a66597_data = { 96 .xtal = R8A66597_PLATDATA_XTAL_12MHZ, 97 .vif = 1, 98 }; 99 100 static struct resource r8a66597_usb_host_resources[] = { 101 [0] = { 102 .start = R8A66597_ADDR, 103 .end = R8A66597_ADDR + R8A66597_SIZE - 1, 104 .flags = IORESOURCE_MEM, 105 }, 106 [1] = { 107 .start = evt2irq(0x240), 108 .end = evt2irq(0x240), 109 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, 110 }, 111 }; 112 113 static struct platform_device r8a66597_usb_host_device = { 114 .name = "r8a66597_hcd", 115 .id = -1, 116 .dev = { 117 .dma_mask = NULL, 118 .coherent_dma_mask = 0xffffffff, 119 .platform_data = &r8a66597_data, 120 }, 121 .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), 122 .resource = r8a66597_usb_host_resources, 123 }; 124 125 static struct resource sm501_resources[] = { 126 [0] = { 127 .start = SM107_MEM_ADDR, 128 .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1, 129 .flags = IORESOURCE_MEM, 130 }, 131 [1] = { 132 .start = SM107_REG_ADDR, 133 .end = SM107_REG_ADDR + SM107_REG_SIZE - 1, 134 .flags = IORESOURCE_MEM, 135 }, 136 [2] = { 137 .start = evt2irq(0x340), 138 .flags = IORESOURCE_IRQ, 139 }, 140 }; 141 142 static struct fb_videomode sm501_default_mode_crt = { 143 .pixclock = 35714, /* 28MHz */ 144 .xres = 640, 145 .yres = 480, 146 .left_margin = 105, 147 .right_margin = 16, 148 .upper_margin = 33, 149 .lower_margin = 10, 150 .hsync_len = 39, 151 .vsync_len = 2, 152 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 153 }; 154 155 static struct fb_videomode sm501_default_mode_pnl = { 156 .pixclock = 40000, /* 25MHz */ 157 .xres = 640, 158 .yres = 480, 159 .left_margin = 2, 160 .right_margin = 16, 161 .upper_margin = 33, 162 .lower_margin = 10, 163 .hsync_len = 39, 164 .vsync_len = 2, 165 .sync = 0, 166 }; 167 168 static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = { 169 .def_bpp = 16, 170 .def_mode = &sm501_default_mode_pnl, 171 .flags = SM501FB_FLAG_USE_INIT_MODE | 172 SM501FB_FLAG_USE_HWCURSOR | 173 SM501FB_FLAG_USE_HWACCEL | 174 SM501FB_FLAG_DISABLE_AT_EXIT | 175 SM501FB_FLAG_PANEL_NO_VBIASEN, 176 }; 177 178 static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = { 179 .def_bpp = 16, 180 .def_mode = &sm501_default_mode_crt, 181 .flags = SM501FB_FLAG_USE_INIT_MODE | 182 SM501FB_FLAG_USE_HWCURSOR | 183 SM501FB_FLAG_USE_HWACCEL | 184 SM501FB_FLAG_DISABLE_AT_EXIT, 185 }; 186 187 static struct sm501_platdata_fb sm501_fb_pdata = { 188 .fb_route = SM501_FB_OWN, 189 .fb_crt = &sm501_pdata_fbsub_crt, 190 .fb_pnl = &sm501_pdata_fbsub_pnl, 191 }; 192 193 static struct sm501_initdata sm501_initdata = { 194 .gpio_high = { 195 .set = 0x00001fe0, 196 .mask = 0x0, 197 }, 198 .devices = 0, 199 .mclk = 84 * 1000000, 200 .m1xclk = 112 * 1000000, 201 }; 202 203 static struct sm501_platdata sm501_platform_data = { 204 .init = &sm501_initdata, 205 .fb = &sm501_fb_pdata, 206 }; 207 208 static struct platform_device sm501_device = { 209 .name = "sm501", 210 .id = -1, 211 .dev = { 212 .platform_data = &sm501_platform_data, 213 }, 214 .num_resources = ARRAY_SIZE(sm501_resources), 215 .resource = sm501_resources, 216 }; 217 218 static struct resource i2c_proto_resources[] = { 219 [0] = { 220 .start = PCA9564_PROTO_32BIT_ADDR, 221 .end = PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1, 222 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, 223 }, 224 [1] = { 225 .start = evt2irq(0x380), 226 .end = evt2irq(0x380), 227 .flags = IORESOURCE_IRQ, 228 }, 229 }; 230 231 static struct resource i2c_resources[] = { 232 [0] = { 233 .start = PCA9564_ADDR, 234 .end = PCA9564_ADDR + PCA9564_SIZE - 1, 235 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, 236 }, 237 [1] = { 238 .start = evt2irq(0x380), 239 .end = evt2irq(0x380), 240 .flags = IORESOURCE_IRQ, 241 }, 242 }; 243 244 static struct gpiod_lookup_table i2c_gpio_table = { 245 .dev_id = "i2c.0", 246 .table = { 247 GPIO_LOOKUP("pfc-sh7757", 0, "reset-gpios", GPIO_ACTIVE_LOW), 248 { }, 249 }, 250 }; 251 252 static struct i2c_pca9564_pf_platform_data i2c_platform_data = { 253 .i2c_clock_speed = I2C_PCA_CON_330kHz, 254 .timeout = HZ, 255 }; 256 257 static struct platform_device i2c_device = { 258 .name = "i2c-pca-platform", 259 .id = -1, 260 .dev = { 261 .platform_data = &i2c_platform_data, 262 }, 263 .num_resources = ARRAY_SIZE(i2c_resources), 264 .resource = i2c_resources, 265 }; 266 267 static struct platform_device *sh7785lcr_devices[] __initdata = { 268 &heartbeat_device, 269 &nor_flash_device, 270 &r8a66597_usb_host_device, 271 &sm501_device, 272 &i2c_device, 273 }; 274 275 static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = { 276 { 277 I2C_BOARD_INFO("r2025sd", 0x32), 278 }, 279 }; 280 281 static int __init sh7785lcr_devices_setup(void) 282 { 283 i2c_register_board_info(0, sh7785lcr_i2c_devices, 284 ARRAY_SIZE(sh7785lcr_i2c_devices)); 285 286 if (mach_is_sh7785lcr_pt()) { 287 i2c_device.resource = i2c_proto_resources; 288 i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources); 289 } 290 291 gpiod_add_lookup_table(&i2c_gpio_table); 292 return platform_add_devices(sh7785lcr_devices, 293 ARRAY_SIZE(sh7785lcr_devices)); 294 } 295 device_initcall(sh7785lcr_devices_setup); 296 297 /* Initialize IRQ setting */ 298 void __init init_sh7785lcr_IRQ(void) 299 { 300 plat_irq_setup_pins(IRQ_MODE_IRQ7654); 301 plat_irq_setup_pins(IRQ_MODE_IRQ3210); 302 } 303 304 static int sh7785lcr_clk_init(void) 305 { 306 struct clk *clk; 307 int ret; 308 309 clk = clk_get(NULL, "extal"); 310 if (IS_ERR(clk)) 311 return PTR_ERR(clk); 312 ret = clk_set_rate(clk, 33333333); 313 clk_put(clk); 314 315 return ret; 316 } 317 318 static void sh7785lcr_power_off(void) 319 { 320 unsigned char *p; 321 322 p = ioremap(PLD_POFCR, PLD_POFCR + 1); 323 if (!p) { 324 printk(KERN_ERR "%s: ioremap error.\n", __func__); 325 return; 326 } 327 *p = 0x01; 328 iounmap(p); 329 set_bl_bit(); 330 while (1) 331 cpu_relax(); 332 } 333 334 /* Initialize the board */ 335 static void __init sh7785lcr_setup(char **cmdline_p) 336 { 337 void __iomem *sm501_reg; 338 339 printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n"); 340 341 pm_power_off = sh7785lcr_power_off; 342 343 /* sm501 DRAM configuration */ 344 sm501_reg = ioremap(SM107_REG_ADDR, SM501_DRAM_CONTROL); 345 if (!sm501_reg) { 346 printk(KERN_ERR "%s: ioremap error.\n", __func__); 347 return; 348 } 349 350 writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL); 351 iounmap(sm501_reg); 352 } 353 354 /* Return the board specific boot mode pin configuration */ 355 static int sh7785lcr_mode_pins(void) 356 { 357 int value = 0; 358 359 /* These are the factory default settings of S1 and S2. 360 * If you change these dip switches then you will need to 361 * adjust the values below as well. 362 */ 363 value |= MODE_PIN4; /* Clock Mode 16 */ 364 value |= MODE_PIN5; /* 32-bit Area0 bus width */ 365 value |= MODE_PIN6; /* 32-bit Area0 bus width */ 366 value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */ 367 value |= MODE_PIN8; /* Little Endian */ 368 value |= MODE_PIN9; /* Master Mode */ 369 value |= MODE_PIN14; /* No PLL step-up */ 370 371 return value; 372 } 373 374 /* 375 * The Machine Vector 376 */ 377 static struct sh_machine_vector mv_sh7785lcr __initmv = { 378 .mv_name = "SH7785LCR", 379 .mv_setup = sh7785lcr_setup, 380 .mv_clk_init = sh7785lcr_clk_init, 381 .mv_init_irq = init_sh7785lcr_IRQ, 382 .mv_mode_pins = sh7785lcr_mode_pins, 383 }; 384 385