1 /* 2 * June 2006 steve.glendinning@smsc.com 3 * 4 * Polaris-specific resource declaration 5 * 6 */ 7 8 #include <linux/init.h> 9 #include <linux/interrupt.h> 10 #include <linux/irq.h> 11 #include <linux/platform_device.h> 12 #include <linux/smsc911x.h> 13 #include <linux/io.h> 14 #include <asm/irq.h> 15 #include <asm/machvec.h> 16 #include <asm/heartbeat.h> 17 #include <cpu/gpio.h> 18 #include <mach-se/mach/se.h> 19 20 #define BCR2 (0xFFFFFF62) 21 #define WCR2 (0xFFFFFF66) 22 #define AREA5_WAIT_CTRL (0x1C00) 23 #define WAIT_STATES_10 (0x7) 24 25 static struct resource smsc911x_resources[] = { 26 [0] = { 27 .name = "smsc911x-memory", 28 .start = PA_EXT5, 29 .end = PA_EXT5 + 0x1fff, 30 .flags = IORESOURCE_MEM, 31 }, 32 [1] = { 33 .name = "smsc911x-irq", 34 .start = IRQ0_IRQ, 35 .end = IRQ0_IRQ, 36 .flags = IORESOURCE_IRQ, 37 }, 38 }; 39 40 static struct smsc911x_platform_config smsc911x_config = { 41 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, 42 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, 43 .flags = SMSC911X_USE_32BIT, 44 .phy_interface = PHY_INTERFACE_MODE_MII, 45 }; 46 47 static struct platform_device smsc911x_device = { 48 .name = "smsc911x", 49 .id = 0, 50 .num_resources = ARRAY_SIZE(smsc911x_resources), 51 .resource = smsc911x_resources, 52 .dev = { 53 .platform_data = &smsc911x_config, 54 }, 55 }; 56 57 static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 }; 58 59 static struct heartbeat_data heartbeat_data = { 60 .bit_pos = heartbeat_bit_pos, 61 .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), 62 .regsize = 8, 63 }; 64 65 static struct resource heartbeat_resources[] = { 66 [0] = { 67 .start = PORT_PCDR, 68 .end = PORT_PCDR, 69 .flags = IORESOURCE_MEM, 70 }, 71 }; 72 73 static struct platform_device heartbeat_device = { 74 .name = "heartbeat", 75 .id = -1, 76 .dev = { 77 .platform_data = &heartbeat_data, 78 }, 79 .num_resources = ARRAY_SIZE(heartbeat_resources), 80 .resource = heartbeat_resources, 81 }; 82 83 static struct platform_device *polaris_devices[] __initdata = { 84 &smsc911x_device, 85 &heartbeat_device, 86 }; 87 88 static int __init polaris_initialise(void) 89 { 90 u16 wcr, bcr_mask; 91 92 printk(KERN_INFO "Configuring Polaris external bus\n"); 93 94 /* Configure area 5 with 2 wait states */ 95 wcr = ctrl_inw(WCR2); 96 wcr &= (~AREA5_WAIT_CTRL); 97 wcr |= (WAIT_STATES_10 << 10); 98 ctrl_outw(wcr, WCR2); 99 100 /* Configure area 5 for 32-bit access */ 101 bcr_mask = ctrl_inw(BCR2); 102 bcr_mask |= 1 << 10; 103 ctrl_outw(bcr_mask, BCR2); 104 105 return platform_add_devices(polaris_devices, 106 ARRAY_SIZE(polaris_devices)); 107 } 108 arch_initcall(polaris_initialise); 109 110 static struct ipr_data ipr_irq_table[] = { 111 /* External IRQs */ 112 { IRQ0_IRQ, 0, 0, 1, }, /* IRQ0 */ 113 { IRQ1_IRQ, 0, 4, 1, }, /* IRQ1 */ 114 }; 115 116 static unsigned long ipr_offsets[] = { 117 INTC_IPRC 118 }; 119 120 static struct ipr_desc ipr_irq_desc = { 121 .ipr_offsets = ipr_offsets, 122 .nr_offsets = ARRAY_SIZE(ipr_offsets), 123 124 .ipr_data = ipr_irq_table, 125 .nr_irqs = ARRAY_SIZE(ipr_irq_table), 126 .chip = { 127 .name = "sh7709-ext", 128 }, 129 }; 130 131 static void __init init_polaris_irq(void) 132 { 133 /* Disable all interrupts */ 134 ctrl_outw(0, BCR_ILCRA); 135 ctrl_outw(0, BCR_ILCRB); 136 ctrl_outw(0, BCR_ILCRC); 137 ctrl_outw(0, BCR_ILCRD); 138 ctrl_outw(0, BCR_ILCRE); 139 ctrl_outw(0, BCR_ILCRF); 140 ctrl_outw(0, BCR_ILCRG); 141 142 register_ipr_controller(&ipr_irq_desc); 143 } 144 145 static struct sh_machine_vector mv_polaris __initmv = { 146 .mv_name = "Polaris", 147 .mv_nr_irqs = 61, 148 .mv_init_irq = init_polaris_irq, 149 }; 150