1 /* 2 * linux/arch/sh/boards/magicpanel/setup.c 3 * 4 * Copyright (C) 2007 Markus Brunner, Mark Jonas 5 * 6 * Magic Panel Release 2 board setup 7 * 8 * This file is subject to the terms and conditions of the GNU General Public 9 * License. See the file "COPYING" in the main directory of this archive 10 * for more details. 11 */ 12 #include <linux/init.h> 13 #include <linux/irq.h> 14 #include <linux/platform_device.h> 15 #include <linux/delay.h> 16 #include <linux/gpio.h> 17 #include <linux/smsc911x.h> 18 #include <linux/mtd/mtd.h> 19 #include <linux/mtd/partitions.h> 20 #include <linux/mtd/physmap.h> 21 #include <linux/mtd/map.h> 22 #include <mach/magicpanelr2.h> 23 #include <asm/heartbeat.h> 24 #include <cpu/sh7720.h> 25 26 #define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL) 27 28 /* Prefer cmdline over RedBoot */ 29 static const char *probes[] = { "cmdlinepart", "RedBoot", NULL }; 30 31 /* Wait until reset finished. Timeout is 100ms. */ 32 static int __init ethernet_reset_finished(void) 33 { 34 int i; 35 36 if (LAN9115_READY) 37 return 1; 38 39 for (i = 0; i < 10; ++i) { 40 mdelay(10); 41 if (LAN9115_READY) 42 return 1; 43 } 44 45 return 0; 46 } 47 48 static void __init reset_ethernet(void) 49 { 50 /* PMDR: LAN_RESET=on */ 51 CLRBITS_OUTB(0x10, PORT_PMDR); 52 53 udelay(200); 54 55 /* PMDR: LAN_RESET=off */ 56 SETBITS_OUTB(0x10, PORT_PMDR); 57 } 58 59 static void __init setup_chip_select(void) 60 { 61 /* CS2: LAN (0x08000000 - 0x0bffffff) */ 62 /* no idle cycles, normal space, 8 bit data bus */ 63 ctrl_outl(0x36db0400, CS2BCR); 64 /* (SW:1.5 WR:3 HW:1.5), ext. wait */ 65 ctrl_outl(0x000003c0, CS2WCR); 66 67 /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */ 68 /* no idle cycles, normal space, 8 bit data bus */ 69 ctrl_outl(0x00000200, CS4BCR); 70 /* (SW:1.5 WR:3 HW:1.5), ext. wait */ 71 ctrl_outl(0x00100981, CS4WCR); 72 73 /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */ 74 /* no idle cycles, normal space, 8 bit data bus */ 75 ctrl_outl(0x00000200, CS5ABCR); 76 /* (SW:1.5 WR:3 HW:1.5), ext. wait */ 77 ctrl_outl(0x00100981, CS5AWCR); 78 79 /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */ 80 /* no idle cycles, normal space, 8 bit data bus */ 81 ctrl_outl(0x00000200, CS5BBCR); 82 /* (SW:1.5 WR:3 HW:1.5), ext. wait */ 83 ctrl_outl(0x00100981, CS5BWCR); 84 85 /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */ 86 /* no idle cycles, normal space, 8 bit data bus */ 87 ctrl_outl(0x00000200, CS6ABCR); 88 /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ 89 ctrl_outl(0x001009C1, CS6AWCR); 90 } 91 92 static void __init setup_port_multiplexing(void) 93 { 94 /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); 95 * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); 96 */ 97 ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ 98 99 /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); 100 * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); 101 */ 102 ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ 103 104 /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); 105 * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; 106 */ 107 ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ 108 109 /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); 110 * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); 111 */ 112 ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */ 113 114 /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; 115 * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; 116 */ 117 ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */ 118 119 /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; 120 * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); 121 */ 122 ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */ 123 124 /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2); 125 * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); 126 */ 127 ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */ 128 129 /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); 130 * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; 131 */ 132 ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */ 133 134 /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; 135 * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; 136 */ 137 ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */ 138 139 /* K7 (x); K6 (x); K5 (x); K4 (x); 140 * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY) 141 */ 142 ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */ 143 144 /* L7 TRST; L6 TMS; L5 TDO; L4 TDI; 145 * L3 TCK; L2 (x); L1 (x); L0 (x); 146 */ 147 ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */ 148 149 /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); 150 * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL); 151 * M1 CS5B(CAN3_CS); M0 GPI+(nc); 152 */ 153 ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */ 154 155 /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, 156 * LAN_RESET=off, BUZZER=off, LCD_BL=off 157 */ 158 #if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2 159 ctrl_outb(0x30, PORT_PMDR); 160 #elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3 161 ctrl_outb(0xF0, PORT_PMDR); 162 #else 163 #error Unknown revision of PLATFORM_MP_R2 164 #endif 165 166 /* P7 (x); P6 (x); P5 (x); 167 * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ); 168 * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ) 169 */ 170 ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */ 171 ctrl_outb(0x10, PORT_PPDR); 172 173 /* R7 A25; R6 A24; R5 A23; R4 A22; 174 * R3 A21; R2 A20; R1 A19; R0 A0; 175 */ 176 gpio_request(GPIO_FN_A25, NULL); 177 gpio_request(GPIO_FN_A24, NULL); 178 gpio_request(GPIO_FN_A23, NULL); 179 gpio_request(GPIO_FN_A22, NULL); 180 gpio_request(GPIO_FN_A21, NULL); 181 gpio_request(GPIO_FN_A20, NULL); 182 gpio_request(GPIO_FN_A19, NULL); 183 gpio_request(GPIO_FN_A0, NULL); 184 185 /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); 186 * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; 187 */ 188 ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */ 189 190 /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; 191 * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG) 192 */ 193 ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */ 194 195 /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); 196 * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; 197 */ 198 ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */ 199 200 /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); 201 * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); 202 */ 203 ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */ 204 } 205 206 static void __init mpr2_setup(char **cmdline_p) 207 { 208 __set_io_port_base(0xa0000000); 209 210 /* set Pin Select Register A: 211 * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, 212 * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND 213 */ 214 ctrl_outw(0xAABC, PORT_PSELA); 215 /* set Pin Select Register B: 216 * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, 217 * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved 218 */ 219 ctrl_outw(0x3C00, PORT_PSELB); 220 /* set Pin Select Register C: 221 * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved 222 */ 223 ctrl_outw(0x0000, PORT_PSELC); 224 /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, 225 * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved 226 */ 227 ctrl_outw(0x0000, PORT_PSELD); 228 /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */ 229 ctrl_outw(0x0101, PORT_UTRCTL); 230 /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */ 231 ctrl_outw(0xA5C0, PORT_UCLKCR_W); 232 233 setup_chip_select(); 234 235 setup_port_multiplexing(); 236 237 reset_ethernet(); 238 239 printk(KERN_INFO "Magic Panel Release 2 A.%i\n", 240 CONFIG_SH_MAGIC_PANEL_R2_VERSION); 241 242 if (ethernet_reset_finished() == 0) 243 printk(KERN_WARNING "Ethernet not ready\n"); 244 } 245 246 static struct resource smsc911x_resources[] = { 247 [0] = { 248 .start = 0xa8000000, 249 .end = 0xabffffff, 250 .flags = IORESOURCE_MEM, 251 }, 252 [1] = { 253 .start = 35, 254 .end = 35, 255 .flags = IORESOURCE_IRQ, 256 }, 257 }; 258 259 static struct smsc911x_platform_config smsc911x_config = { 260 .phy_interface = PHY_INTERFACE_MODE_MII, 261 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, 262 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, 263 .flags = SMSC911X_USE_32BIT, 264 }; 265 266 static struct platform_device smsc911x_device = { 267 .name = "smsc911x", 268 .id = -1, 269 .num_resources = ARRAY_SIZE(smsc911x_resources), 270 .resource = smsc911x_resources, 271 .dev = { 272 .platform_data = &smsc911x_config, 273 }, 274 }; 275 276 static struct resource heartbeat_resources[] = { 277 [0] = { 278 .start = PA_LED, 279 .end = PA_LED, 280 .flags = IORESOURCE_MEM, 281 }, 282 }; 283 284 static struct heartbeat_data heartbeat_data = { 285 .flags = HEARTBEAT_INVERTED, 286 }; 287 288 static struct platform_device heartbeat_device = { 289 .name = "heartbeat", 290 .id = -1, 291 .dev = { 292 .platform_data = &heartbeat_data, 293 }, 294 .num_resources = ARRAY_SIZE(heartbeat_resources), 295 .resource = heartbeat_resources, 296 }; 297 298 static struct mtd_partition *parsed_partitions; 299 300 static struct mtd_partition mpr2_partitions[] = { 301 /* Reserved for bootloader, read-only */ 302 { 303 .name = "Bootloader", 304 .offset = 0x00000000UL, 305 .size = MPR2_MTD_BOOTLOADER_SIZE, 306 .mask_flags = MTD_WRITEABLE, 307 }, 308 /* Reserved for kernel image */ 309 { 310 .name = "Kernel", 311 .offset = MTDPART_OFS_NXTBLK, 312 .size = MPR2_MTD_KERNEL_SIZE, 313 }, 314 /* Rest is used for Flash FS */ 315 { 316 .name = "Flash_FS", 317 .offset = MTDPART_OFS_NXTBLK, 318 .size = MTDPART_SIZ_FULL, 319 } 320 }; 321 322 static struct physmap_flash_data flash_data = { 323 .width = 2, 324 }; 325 326 static struct resource flash_resource = { 327 .start = 0x00000000, 328 .end = 0x2000000UL, 329 .flags = IORESOURCE_MEM, 330 }; 331 332 static struct platform_device flash_device = { 333 .name = "physmap-flash", 334 .id = -1, 335 .resource = &flash_resource, 336 .num_resources = 1, 337 .dev = { 338 .platform_data = &flash_data, 339 }, 340 }; 341 342 static struct mtd_info *flash_mtd; 343 344 static struct map_info mpr2_flash_map = { 345 .name = "Magic Panel R2 Flash", 346 .size = 0x2000000UL, 347 .bankwidth = 2, 348 }; 349 350 static void __init set_mtd_partitions(void) 351 { 352 int nr_parts = 0; 353 354 simple_map_init(&mpr2_flash_map); 355 flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map); 356 nr_parts = parse_mtd_partitions(flash_mtd, probes, 357 &parsed_partitions, 0); 358 /* If there is no partition table, used the hard coded table */ 359 if (nr_parts <= 0) { 360 flash_data.parts = mpr2_partitions; 361 flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions); 362 } else { 363 flash_data.nr_parts = nr_parts; 364 flash_data.parts = parsed_partitions; 365 } 366 } 367 368 /* 369 * Add all resources to the platform_device 370 */ 371 372 static struct platform_device *mpr2_devices[] __initdata = { 373 &heartbeat_device, 374 &smsc911x_device, 375 &flash_device, 376 }; 377 378 379 static int __init mpr2_devices_setup(void) 380 { 381 set_mtd_partitions(); 382 return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); 383 } 384 device_initcall(mpr2_devices_setup); 385 386 /* 387 * Initialize IRQ setting 388 */ 389 static void __init init_mpr2_IRQ(void) 390 { 391 plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */ 392 393 set_irq_type(32, IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */ 394 set_irq_type(33, IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */ 395 set_irq_type(34, IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */ 396 set_irq_type(35, IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */ 397 set_irq_type(36, IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */ 398 set_irq_type(37, IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */ 399 400 intc_set_priority(32, 13); /* IRQ0 CAN1 */ 401 intc_set_priority(33, 13); /* IRQ0 CAN2 */ 402 intc_set_priority(34, 13); /* IRQ0 CAN3 */ 403 intc_set_priority(35, 6); /* IRQ3 SMSC9115 */ 404 } 405 406 /* 407 * The Machine Vector 408 */ 409 410 static struct sh_machine_vector mv_mpr2 __initmv = { 411 .mv_name = "mpr2", 412 .mv_setup = mpr2_setup, 413 .mv_init_irq = init_mpr2_IRQ, 414 }; 415