1# SPDX-License-Identifier: GPL-2.0 2menu "Board support" 3 4config SOLUTION_ENGINE 5 bool 6 7config SH_ALPHA_BOARD 8 bool 9 10config SH_DEVICE_TREE 11 bool "Board Described by Device Tree" 12 select OF 13 select OF_EARLY_FLATTREE 14 select TIMER_OF 15 select COMMON_CLK 16 select GENERIC_CALIBRATE_DELAY 17 help 18 Select Board Described by Device Tree to build a kernel that 19 does not hard-code any board-specific knowledge but instead uses 20 a device tree blob provided by the boot-loader. You must enable 21 drivers for any hardware you want to use separately. At this 22 time, only boards based on the open-hardware J-Core processors 23 have sufficient driver coverage to use this option; do not 24 select it if you are using original SuperH hardware. 25 26config SH_JCORE_SOC 27 bool "J-Core SoC" 28 depends on SH_DEVICE_TREE && (CPU_SH2 || CPU_J2) 29 select CLKSRC_JCORE_PIT 30 select JCORE_AIC 31 default y if CPU_J2 32 help 33 Select this option to include drivers core components of the 34 J-Core SoC, including interrupt controllers and timers. 35 36config SH_SOLUTION_ENGINE 37 bool "SolutionEngine" 38 select SOLUTION_ENGINE 39 select CPU_HAS_IPR_IRQ 40 depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ 41 CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ 42 CPU_SUBTYPE_SH7750R 43 help 44 Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, 45 SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. 46 47config SH_7206_SOLUTION_ENGINE 48 bool "SolutionEngine7206" 49 select SOLUTION_ENGINE 50 depends on CPU_SUBTYPE_SH7206 51 help 52 Select 7206 SolutionEngine if configuring for a Hitachi SH7206 53 evaluation board. 54 55config SH_7619_SOLUTION_ENGINE 56 bool "SolutionEngine7619" 57 select SOLUTION_ENGINE 58 depends on CPU_SUBTYPE_SH7619 59 help 60 Select 7619 SolutionEngine if configuring for a Hitachi SH7619 61 evaluation board. 62 63config SH_7721_SOLUTION_ENGINE 64 bool "SolutionEngine7721" 65 select SOLUTION_ENGINE 66 depends on CPU_SUBTYPE_SH7721 67 help 68 Select 7721 SolutionEngine if configuring for a Hitachi SH7721 69 evaluation board. 70 71config SH_7722_SOLUTION_ENGINE 72 bool "SolutionEngine7722" 73 select SOLUTION_ENGINE 74 select GENERIC_IRQ_CHIP 75 select IRQ_DOMAIN 76 depends on CPU_SUBTYPE_SH7722 77 help 78 Select 7722 SolutionEngine if configuring for a Hitachi SH772 79 evaluation board. 80 81config SH_7724_SOLUTION_ENGINE 82 bool "SolutionEngine7724" 83 select SOLUTION_ENGINE 84 depends on CPU_SUBTYPE_SH7724 85 select GPIOLIB 86 select SND_SOC_AK4642 if SND_SIMPLE_CARD 87 select REGULATOR_FIXED_VOLTAGE if REGULATOR 88 help 89 Select 7724 SolutionEngine if configuring for a Hitachi SH7724 90 evaluation board. 91 92config SH_7751_SOLUTION_ENGINE 93 bool "SolutionEngine7751" 94 select SOLUTION_ENGINE 95 select CPU_HAS_IPR_IRQ 96 depends on CPU_SUBTYPE_SH7751 97 help 98 Select 7751 SolutionEngine if configuring for a Hitachi SH7751 99 evaluation board. 100 101config SH_7780_SOLUTION_ENGINE 102 bool "SolutionEngine7780" 103 select SOLUTION_ENGINE 104 select HAVE_PCI 105 depends on CPU_SUBTYPE_SH7780 106 help 107 Select 7780 SolutionEngine if configuring for a Renesas SH7780 108 evaluation board. 109 110config SH_7343_SOLUTION_ENGINE 111 bool "SolutionEngine7343" 112 select SOLUTION_ENGINE 113 select GENERIC_IRQ_CHIP 114 select IRQ_DOMAIN 115 depends on CPU_SUBTYPE_SH7343 116 help 117 Select 7343 SolutionEngine if configuring for a Hitachi 118 SH7343 (SH-Mobile 3AS) evaluation board. 119 120config SH_HP6XX 121 bool "HP6XX" 122 select SYS_SUPPORTS_APM_EMULATION 123 select HD6446X_SERIES 124 depends on CPU_SUBTYPE_SH7709 125 help 126 Select HP6XX if configuring for a HP jornada HP6xx. 127 More information (hardware only) at 128 <http://www.hp.com/jornada/>. 129 130config SH_DREAMCAST 131 bool "Dreamcast" 132 select HAVE_PCI 133 depends on CPU_SUBTYPE_SH7091 134 help 135 Select Dreamcast if configuring for a SEGA Dreamcast. 136 More information at <http://www.linux-sh.org> 137 138config SH_SH03 139 bool "Interface CTP/PCI-SH03" 140 depends on CPU_SUBTYPE_SH7751 141 select CPU_HAS_IPR_IRQ 142 select HAVE_PCI 143 help 144 CTP/PCI-SH03 is a CPU module computer that is produced 145 by Interface Corporation. 146 More information at <http://www.interface.co.jp> 147 148config SH_SECUREEDGE5410 149 bool "SecureEdge5410" 150 depends on CPU_SUBTYPE_SH7751R 151 select CPU_HAS_IPR_IRQ 152 select HAVE_PCI 153 help 154 Select SecureEdge5410 if configuring for a SnapGear SH board. 155 This includes both the OEM SecureEdge products as well as the 156 SME product line. 157 158config SH_RTS7751R2D 159 bool "RTS7751R2D" 160 depends on CPU_SUBTYPE_SH7751R 161 select HAVE_PCI 162 select IO_TRAPPED if MMU 163 help 164 Select RTS7751R2D if configuring for a Renesas Technology 165 Sales SH-Graphics board. 166 167config SH_RSK 168 bool "Renesas Starter Kit" 169 depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ 170 CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 171 select REGULATOR_FIXED_VOLTAGE if REGULATOR 172 help 173 Select this option if configuring for any of the RSK+ MCU 174 evaluation platforms. 175 176config SH_SDK7780 177 bool "SDK7780R3" 178 depends on CPU_SUBTYPE_SH7780 179 select HAVE_PCI 180 help 181 Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 182 evaluation board. 183 184config SH_SDK7786 185 bool "SDK7786" 186 depends on CPU_SUBTYPE_SH7786 187 select HAVE_PCI 188 select NO_IOPORT_MAP if !PCI 189 select HAVE_SRAM_POOL 190 select REGULATOR_FIXED_VOLTAGE if REGULATOR 191 help 192 Select SDK7786 if configuring for a Renesas Technology Europe 193 SH7786-65nm board. 194 195config SH_HIGHLANDER 196 bool "Highlander" 197 depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 198 select HAVE_PCI 199 select IO_TRAPPED if MMU 200 201config SH_SH7757LCR 202 bool "SH7757LCR" 203 depends on CPU_SUBTYPE_SH7757 204 select GPIOLIB 205 select REGULATOR_FIXED_VOLTAGE if REGULATOR 206 207config SH_SH7785LCR 208 bool "SH7785LCR" 209 depends on CPU_SUBTYPE_SH7785 210 select HAVE_PCI 211 212config SH_SH7785LCR_29BIT_PHYSMAPS 213 bool "SH7785LCR 29bit physmaps" 214 depends on SH_SH7785LCR && 29BIT 215 default y 216 help 217 This board has 2 physical memory maps. It can be changed with 218 DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, 219 you can access all on-board device in 29bit address mode. 220 221config SH_SH7785LCR_PT 222 bool "SH7785LCR prototype board on 32-bit MMU mode" 223 depends on SH_SH7785LCR && 32BIT 224 default n 225 help 226 If you use prototype board, this option is enabled. 227 228config SH_URQUELL 229 bool "Urquell" 230 depends on CPU_SUBTYPE_SH7786 231 select GPIOLIB 232 select HAVE_PCI 233 select NO_IOPORT_MAP if !PCI 234 235config SH_MIGOR 236 bool "Migo-R" 237 depends on CPU_SUBTYPE_SH7722 238 select GPIOLIB 239 select REGULATOR_FIXED_VOLTAGE if REGULATOR 240 help 241 Select Migo-R if configuring for the SH7722 Migo-R platform 242 by Renesas System Solutions Asia Pte. Ltd. 243 244config SH_AP325RXA 245 bool "AP-325RXA" 246 depends on CPU_SUBTYPE_SH7723 247 select GPIOLIB 248 select REGULATOR_FIXED_VOLTAGE if REGULATOR 249 help 250 Renesas "AP-325RXA" support. 251 Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" 252 253config SH_KFR2R09 254 bool "KFR2R09" 255 depends on CPU_SUBTYPE_SH7724 256 select GPIOLIB 257 select REGULATOR_FIXED_VOLTAGE if REGULATOR 258 help 259 "Kit For R2R for 2009" support. 260 261config SH_ECOVEC 262 bool "EcoVec" 263 depends on CPU_SUBTYPE_SH7724 264 select GPIOLIB 265 select SND_SOC_DA7210 if SND_SIMPLE_CARD 266 select REGULATOR_FIXED_VOLTAGE if REGULATOR 267 help 268 Renesas "R0P7724LC0011/21RL (EcoVec)" support. 269 270config SH_SH7763RDP 271 bool "SH7763RDP" 272 depends on CPU_SUBTYPE_SH7763 273 help 274 Select SH7763RDP if configuring for a Renesas SH7763 275 evaluation board. 276 277config SH_ESPT 278 bool "ESPT" 279 depends on CPU_SUBTYPE_SH7763 280 help 281 Select ESPT if configuring for a Renesas SH7763 282 with gigabit ether evaluation board. 283 284config SH_EDOSK7705 285 bool "EDOSK7705" 286 depends on CPU_SUBTYPE_SH7705 287 288config SH_EDOSK7760 289 bool "EDOSK7760" 290 depends on CPU_SUBTYPE_SH7760 291 help 292 Select if configuring for a Renesas EDOSK7760 293 evaluation board. 294 295config SH_SH4202_MICRODEV 296 bool "SH4-202 MicroDev" 297 depends on CPU_SUBTYPE_SH4_202 298 help 299 Select SH4-202 MicroDev if configuring for a SuperH MicroDev board 300 with an SH4-202 CPU. 301 302config SH_LANDISK 303 bool "LANDISK" 304 depends on CPU_SUBTYPE_SH7751R 305 select HAVE_PCI 306 help 307 I-O DATA DEVICE, INC. "LANDISK Series" support. 308 309config SH_TITAN 310 bool "TITAN" 311 depends on CPU_SUBTYPE_SH7751R 312 select CPU_HAS_IPR_IRQ 313 select HAVE_PCI 314 help 315 Select Titan if you are configuring for a Nimble Microsystems 316 NetEngine NP51R. 317 318config SH_SHMIN 319 bool "SHMIN" 320 depends on CPU_SUBTYPE_SH7706 321 select CPU_HAS_IPR_IRQ 322 help 323 Select SHMIN if configuring for the SHMIN board. 324 325config SH_LBOX_RE2 326 bool "L-BOX RE2" 327 depends on CPU_SUBTYPE_SH7751R 328 select HAVE_PCI 329 help 330 Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. 331 332config SH_X3PROTO 333 bool "SH-X3 Prototype board" 334 depends on CPU_SUBTYPE_SHX3 335 select NO_IOPORT_MAP if !PCI 336 select IRQ_DOMAIN 337 338config SH_MAGIC_PANEL_R2 339 bool "Magic Panel R2" 340 depends on CPU_SUBTYPE_SH7720 341 select GPIOLIB 342 select REGULATOR_FIXED_VOLTAGE if REGULATOR 343 help 344 Select Magic Panel R2 if configuring for Magic Panel R2. 345 346config SH_CAYMAN 347 bool "Hitachi Cayman" 348 depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 349 select HAVE_PCI 350 select ARCH_MIGHT_HAVE_PC_SERIO 351 352config SH_POLARIS 353 bool "SMSC Polaris" 354 select CPU_HAS_IPR_IRQ 355 select REGULATOR_FIXED_VOLTAGE if REGULATOR 356 depends on CPU_SUBTYPE_SH7709 357 help 358 Select if configuring for an SMSC Polaris development board 359 360config SH_SH2007 361 bool "SH-2007 board" 362 select NO_IOPORT_MAP 363 select REGULATOR_FIXED_VOLTAGE if REGULATOR 364 depends on CPU_SUBTYPE_SH7780 365 help 366 SH-2007 is a single-board computer based around SH7780 chip 367 intended for embedded applications. 368 It has an Ethernet interface (SMC9118), direct connected 369 Compact Flash socket, two serial ports and PC-104 bus. 370 More information at <http://sh2000.sh-linux.org>. 371 372config SH_APSH4A3A 373 bool "AP-SH4A-3A" 374 select SH_ALPHA_BOARD 375 select REGULATOR_FIXED_VOLTAGE if REGULATOR 376 depends on CPU_SUBTYPE_SH7785 377 help 378 Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. 379 380config SH_APSH4AD0A 381 bool "AP-SH4AD-0A" 382 select SH_ALPHA_BOARD 383 select HAVE_PCI 384 select REGULATOR_FIXED_VOLTAGE if REGULATOR 385 depends on CPU_SUBTYPE_SH7786 386 help 387 Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. 388 389source "arch/sh/boards/mach-r2d/Kconfig" 390source "arch/sh/boards/mach-highlander/Kconfig" 391source "arch/sh/boards/mach-sdk7780/Kconfig" 392source "arch/sh/boards/mach-migor/Kconfig" 393source "arch/sh/boards/mach-rsk/Kconfig" 394 395if SH_MAGIC_PANEL_R2 396 397menu "Magic Panel R2 options" 398 399config SH_MAGIC_PANEL_R2_VERSION 400 int "Magic Panel R2 Version" 401 default "3" 402 help 403 Set the version of the Magic Panel R2 404 405endmenu 406 407endif 408 409endmenu 410