1menu "Board support" 2 3config SOLUTION_ENGINE 4 bool 5 6config SH_ALPHA_BOARD 7 bool 8 9config SH_DEVICE_TREE 10 bool "Board Described by Device Tree" 11 select OF 12 select OF_EARLY_FLATTREE 13 select CLKSRC_OF 14 select GENERIC_CALIBRATE_DELAY 15 help 16 Select Board Described by Device Tree to build a kernel that 17 does not hard-code any board-specific knowledge but instead uses 18 a device tree blob provided by the boot-loader. You must enable 19 drivers for any hardware you want to use separately. At this 20 time, only boards based on the open-hardware J-Core processors 21 have sufficient driver coverage to use this option; do not 22 select it if you are using original SuperH hardware. 23 24config SH_SOLUTION_ENGINE 25 bool "SolutionEngine" 26 select SOLUTION_ENGINE 27 select CPU_HAS_IPR_IRQ 28 depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ 29 CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ 30 CPU_SUBTYPE_SH7750R 31 help 32 Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, 33 SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. 34 35config SH_7206_SOLUTION_ENGINE 36 bool "SolutionEngine7206" 37 select SOLUTION_ENGINE 38 depends on CPU_SUBTYPE_SH7206 39 help 40 Select 7206 SolutionEngine if configuring for a Hitachi SH7206 41 evaluation board. 42 43config SH_7619_SOLUTION_ENGINE 44 bool "SolutionEngine7619" 45 select SOLUTION_ENGINE 46 depends on CPU_SUBTYPE_SH7619 47 help 48 Select 7619 SolutionEngine if configuring for a Hitachi SH7619 49 evaluation board. 50 51config SH_7721_SOLUTION_ENGINE 52 bool "SolutionEngine7721" 53 select SOLUTION_ENGINE 54 depends on CPU_SUBTYPE_SH7721 55 help 56 Select 7721 SolutionEngine if configuring for a Hitachi SH7721 57 evaluation board. 58 59config SH_7722_SOLUTION_ENGINE 60 bool "SolutionEngine7722" 61 select SOLUTION_ENGINE 62 select GENERIC_IRQ_CHIP 63 select IRQ_DOMAIN 64 depends on CPU_SUBTYPE_SH7722 65 help 66 Select 7722 SolutionEngine if configuring for a Hitachi SH772 67 evaluation board. 68 69config SH_7724_SOLUTION_ENGINE 70 bool "SolutionEngine7724" 71 select SOLUTION_ENGINE 72 depends on CPU_SUBTYPE_SH7724 73 select ARCH_REQUIRE_GPIOLIB 74 select SND_SOC_AK4642 if SND_SIMPLE_CARD 75 select REGULATOR_FIXED_VOLTAGE if REGULATOR 76 help 77 Select 7724 SolutionEngine if configuring for a Hitachi SH7724 78 evaluation board. 79 80config SH_7751_SOLUTION_ENGINE 81 bool "SolutionEngine7751" 82 select SOLUTION_ENGINE 83 select CPU_HAS_IPR_IRQ 84 depends on CPU_SUBTYPE_SH7751 85 help 86 Select 7751 SolutionEngine if configuring for a Hitachi SH7751 87 evaluation board. 88 89config SH_7780_SOLUTION_ENGINE 90 bool "SolutionEngine7780" 91 select SOLUTION_ENGINE 92 select SYS_SUPPORTS_PCI 93 depends on CPU_SUBTYPE_SH7780 94 help 95 Select 7780 SolutionEngine if configuring for a Renesas SH7780 96 evaluation board. 97 98config SH_7343_SOLUTION_ENGINE 99 bool "SolutionEngine7343" 100 select SOLUTION_ENGINE 101 select GENERIC_IRQ_CHIP 102 select IRQ_DOMAIN 103 depends on CPU_SUBTYPE_SH7343 104 help 105 Select 7343 SolutionEngine if configuring for a Hitachi 106 SH7343 (SH-Mobile 3AS) evaluation board. 107 108config SH_HP6XX 109 bool "HP6XX" 110 select SYS_SUPPORTS_APM_EMULATION 111 select HD6446X_SERIES 112 depends on CPU_SUBTYPE_SH7709 113 help 114 Select HP6XX if configuring for a HP jornada HP6xx. 115 More information (hardware only) at 116 <http://www.hp.com/jornada/>. 117 118config SH_DREAMCAST 119 bool "Dreamcast" 120 select SYS_SUPPORTS_PCI 121 depends on CPU_SUBTYPE_SH7091 122 help 123 Select Dreamcast if configuring for a SEGA Dreamcast. 124 More information at <http://www.linux-sh.org> 125 126config SH_SH03 127 bool "Interface CTP/PCI-SH03" 128 depends on CPU_SUBTYPE_SH7751 129 select CPU_HAS_IPR_IRQ 130 select SYS_SUPPORTS_PCI 131 help 132 CTP/PCI-SH03 is a CPU module computer that is produced 133 by Interface Corporation. 134 More information at <http://www.interface.co.jp> 135 136config SH_SECUREEDGE5410 137 bool "SecureEdge5410" 138 depends on CPU_SUBTYPE_SH7751R 139 select CPU_HAS_IPR_IRQ 140 select SYS_SUPPORTS_PCI 141 help 142 Select SecureEdge5410 if configuring for a SnapGear SH board. 143 This includes both the OEM SecureEdge products as well as the 144 SME product line. 145 146config SH_RTS7751R2D 147 bool "RTS7751R2D" 148 depends on CPU_SUBTYPE_SH7751R 149 select SYS_SUPPORTS_PCI 150 select IO_TRAPPED if MMU 151 help 152 Select RTS7751R2D if configuring for a Renesas Technology 153 Sales SH-Graphics board. 154 155config SH_RSK 156 bool "Renesas Starter Kit" 157 depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ 158 CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 159 select REGULATOR_FIXED_VOLTAGE if REGULATOR 160 help 161 Select this option if configuring for any of the RSK+ MCU 162 evaluation platforms. 163 164config SH_SDK7780 165 bool "SDK7780R3" 166 depends on CPU_SUBTYPE_SH7780 167 select SYS_SUPPORTS_PCI 168 help 169 Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 170 evaluation board. 171 172config SH_SDK7786 173 bool "SDK7786" 174 depends on CPU_SUBTYPE_SH7786 175 select SYS_SUPPORTS_PCI 176 select NO_IOPORT_MAP if !PCI 177 select ARCH_WANT_OPTIONAL_GPIOLIB 178 select HAVE_SRAM_POOL 179 select REGULATOR_FIXED_VOLTAGE if REGULATOR 180 help 181 Select SDK7786 if configuring for a Renesas Technology Europe 182 SH7786-65nm board. 183 184config SH_HIGHLANDER 185 bool "Highlander" 186 depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 187 select SYS_SUPPORTS_PCI 188 select IO_TRAPPED if MMU 189 190config SH_SH7757LCR 191 bool "SH7757LCR" 192 depends on CPU_SUBTYPE_SH7757 193 select ARCH_REQUIRE_GPIOLIB 194 select REGULATOR_FIXED_VOLTAGE if REGULATOR 195 196config SH_SH7785LCR 197 bool "SH7785LCR" 198 depends on CPU_SUBTYPE_SH7785 199 select SYS_SUPPORTS_PCI 200 201config SH_SH7785LCR_29BIT_PHYSMAPS 202 bool "SH7785LCR 29bit physmaps" 203 depends on SH_SH7785LCR && 29BIT 204 default y 205 help 206 This board has 2 physical memory maps. It can be changed with 207 DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, 208 you can access all on-board device in 29bit address mode. 209 210config SH_SH7785LCR_PT 211 bool "SH7785LCR prototype board on 32-bit MMU mode" 212 depends on SH_SH7785LCR && 32BIT 213 default n 214 help 215 If you use prototype board, this option is enabled. 216 217config SH_URQUELL 218 bool "Urquell" 219 depends on CPU_SUBTYPE_SH7786 220 select ARCH_REQUIRE_GPIOLIB 221 select SYS_SUPPORTS_PCI 222 select NO_IOPORT_MAP if !PCI 223 224config SH_MIGOR 225 bool "Migo-R" 226 depends on CPU_SUBTYPE_SH7722 227 select ARCH_REQUIRE_GPIOLIB 228 select REGULATOR_FIXED_VOLTAGE if REGULATOR 229 help 230 Select Migo-R if configuring for the SH7722 Migo-R platform 231 by Renesas System Solutions Asia Pte. Ltd. 232 233config SH_AP325RXA 234 bool "AP-325RXA" 235 depends on CPU_SUBTYPE_SH7723 236 select ARCH_REQUIRE_GPIOLIB 237 select REGULATOR_FIXED_VOLTAGE if REGULATOR 238 help 239 Renesas "AP-325RXA" support. 240 Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" 241 242config SH_KFR2R09 243 bool "KFR2R09" 244 depends on CPU_SUBTYPE_SH7724 245 select ARCH_REQUIRE_GPIOLIB 246 select REGULATOR_FIXED_VOLTAGE if REGULATOR 247 help 248 "Kit For R2R for 2009" support. 249 250config SH_ECOVEC 251 bool "EcoVec" 252 depends on CPU_SUBTYPE_SH7724 253 select ARCH_REQUIRE_GPIOLIB 254 select SND_SOC_DA7210 if SND_SIMPLE_CARD 255 select REGULATOR_FIXED_VOLTAGE if REGULATOR 256 help 257 Renesas "R0P7724LC0011/21RL (EcoVec)" support. 258 259config SH_SH7763RDP 260 bool "SH7763RDP" 261 depends on CPU_SUBTYPE_SH7763 262 help 263 Select SH7763RDP if configuring for a Renesas SH7763 264 evaluation board. 265 266config SH_ESPT 267 bool "ESPT" 268 depends on CPU_SUBTYPE_SH7763 269 help 270 Select ESPT if configuring for a Renesas SH7763 271 with gigabit ether evaluation board. 272 273config SH_EDOSK7705 274 bool "EDOSK7705" 275 depends on CPU_SUBTYPE_SH7705 276 277config SH_EDOSK7760 278 bool "EDOSK7760" 279 depends on CPU_SUBTYPE_SH7760 280 help 281 Select if configuring for a Renesas EDOSK7760 282 evaluation board. 283 284config SH_SH4202_MICRODEV 285 bool "SH4-202 MicroDev" 286 depends on CPU_SUBTYPE_SH4_202 287 help 288 Select SH4-202 MicroDev if configuring for a SuperH MicroDev board 289 with an SH4-202 CPU. 290 291config SH_LANDISK 292 bool "LANDISK" 293 depends on CPU_SUBTYPE_SH7751R 294 select SYS_SUPPORTS_PCI 295 help 296 I-O DATA DEVICE, INC. "LANDISK Series" support. 297 298config SH_TITAN 299 bool "TITAN" 300 depends on CPU_SUBTYPE_SH7751R 301 select CPU_HAS_IPR_IRQ 302 select SYS_SUPPORTS_PCI 303 help 304 Select Titan if you are configuring for a Nimble Microsystems 305 NetEngine NP51R. 306 307config SH_SHMIN 308 bool "SHMIN" 309 depends on CPU_SUBTYPE_SH7706 310 select CPU_HAS_IPR_IRQ 311 help 312 Select SHMIN if configuring for the SHMIN board. 313 314config SH_LBOX_RE2 315 bool "L-BOX RE2" 316 depends on CPU_SUBTYPE_SH7751R 317 select SYS_SUPPORTS_PCI 318 help 319 Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. 320 321config SH_X3PROTO 322 bool "SH-X3 Prototype board" 323 depends on CPU_SUBTYPE_SHX3 324 select NO_IOPORT_MAP if !PCI 325 select IRQ_DOMAIN 326 327config SH_MAGIC_PANEL_R2 328 bool "Magic Panel R2" 329 depends on CPU_SUBTYPE_SH7720 330 select ARCH_REQUIRE_GPIOLIB 331 select REGULATOR_FIXED_VOLTAGE if REGULATOR 332 help 333 Select Magic Panel R2 if configuring for Magic Panel R2. 334 335config SH_CAYMAN 336 bool "Hitachi Cayman" 337 depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 338 select SYS_SUPPORTS_PCI 339 select ARCH_MIGHT_HAVE_PC_SERIO 340 341config SH_POLARIS 342 bool "SMSC Polaris" 343 select CPU_HAS_IPR_IRQ 344 select REGULATOR_FIXED_VOLTAGE if REGULATOR 345 depends on CPU_SUBTYPE_SH7709 346 help 347 Select if configuring for an SMSC Polaris development board 348 349config SH_SH2007 350 bool "SH-2007 board" 351 select NO_IOPORT_MAP 352 select REGULATOR_FIXED_VOLTAGE if REGULATOR 353 depends on CPU_SUBTYPE_SH7780 354 help 355 SH-2007 is a single-board computer based around SH7780 chip 356 intended for embedded applications. 357 It has an Ethernet interface (SMC9118), direct connected 358 Compact Flash socket, two serial ports and PC-104 bus. 359 More information at <http://sh2000.sh-linux.org>. 360 361config SH_APSH4A3A 362 bool "AP-SH4A-3A" 363 select SH_ALPHA_BOARD 364 select REGULATOR_FIXED_VOLTAGE if REGULATOR 365 depends on CPU_SUBTYPE_SH7785 366 help 367 Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. 368 369config SH_APSH4AD0A 370 bool "AP-SH4AD-0A" 371 select SH_ALPHA_BOARD 372 select SYS_SUPPORTS_PCI 373 select REGULATOR_FIXED_VOLTAGE if REGULATOR 374 depends on CPU_SUBTYPE_SH7786 375 help 376 Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. 377 378source "arch/sh/boards/mach-r2d/Kconfig" 379source "arch/sh/boards/mach-highlander/Kconfig" 380source "arch/sh/boards/mach-sdk7780/Kconfig" 381source "arch/sh/boards/mach-migor/Kconfig" 382source "arch/sh/boards/mach-rsk/Kconfig" 383 384if SH_MAGIC_PANEL_R2 385 386menu "Magic Panel R2 options" 387 388config SH_MAGIC_PANEL_R2_VERSION 389 int "Magic Panel R2 Version" 390 default "3" 391 help 392 Set the version of the Magic Panel R2 393 394endmenu 395 396endif 397 398endmenu 399