1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * Purgatory setup code 4 * 5 * Copyright IBM Corp. 2018 6 * 7 * Author(s): Philipp Rudo <prudo@linux.vnet.ibm.com> 8 */ 9 10#include <linux/linkage.h> 11#include <asm/asm-offsets.h> 12#include <asm/page.h> 13#include <asm/sigp.h> 14 15/* The purgatory is the code running between two kernels. It's main purpose 16 * is to verify that the next kernel was not corrupted after load and to 17 * start it. 18 * 19 * If the next kernel is a crash kernel there are some peculiarities to 20 * consider: 21 * 22 * First the purgatory is called twice. Once only to verify the 23 * sha digest. So if the crash kernel got corrupted the old kernel can try 24 * to trigger a stand-alone dumper. And once to actually load the crash kernel. 25 * 26 * Second the purgatory also has to swap the crash memory region with its 27 * destination at address 0. As the purgatory is part of crash memory this 28 * requires some finesse. The tactic here is that the purgatory first copies 29 * itself to the end of the destination and then swaps the rest of the 30 * memory running from there. 31 */ 32 33#define bufsz purgatory_end-stack 34 35.macro MEMCPY dst,src,len 36 lgr %r0,\dst 37 lgr %r1,\len 38 lgr %r2,\src 39 lgr %r3,\len 40 4120: mvcle %r0,%r2,0 42 jo 20b 43.endm 44 45.macro MEMSWAP dst,src,buf,len 4610: cghi \len,bufsz 47 jh 11f 48 lgr %r4,\len 49 j 12f 5011: lghi %r4,bufsz 51 5212: MEMCPY \buf,\dst,%r4 53 MEMCPY \dst,\src,%r4 54 MEMCPY \src,\buf,%r4 55 56 agr \dst,%r4 57 agr \src,%r4 58 sgr \len,%r4 59 60 cghi \len,0 61 jh 10b 62.endm 63 64.macro START_NEXT_KERNEL base 65 lg %r4,kernel_entry-\base(%r13) 66 lg %r5,load_psw_mask-\base(%r13) 67 ogr %r4,%r5 68 stg %r4,0(%r0) 69 70 xgr %r0,%r0 71 diag %r0,%r0,0x308 72.endm 73 74.text 75.align PAGE_SIZE 76ENTRY(purgatory_start) 77 /* The purgatory might be called after a diag308 so better set 78 * architecture and addressing mode. 79 */ 80 lhi %r1,1 81 sigp %r1,%r0,SIGP_SET_ARCHITECTURE 82 sam64 83 84 larl %r5,gprregs 85 stmg %r6,%r15,0(%r5) 86 87 basr %r13,0 88.base_crash: 89 90 /* Setup stack */ 91 larl %r15,purgatory_end 92 aghi %r15,-160 93 94 /* If the next kernel is KEXEC_TYPE_CRASH the purgatory is called 95 * directly with a flag passed in %r2 whether the purgatory shall do 96 * checksum verification only (%r2 = 0 -> verification only). 97 * 98 * Check now and preserve over C function call by storing in 99 * %r10 whith 100 * 1 -> checksum verification only 101 * 0 -> load new kernel 102 */ 103 lghi %r10,0 104 lg %r11,kernel_type-.base_crash(%r13) 105 cghi %r11,1 /* KEXEC_TYPE_CRASH */ 106 jne .do_checksum_verification 107 cghi %r2,0 /* checksum verification only */ 108 jne .do_checksum_verification 109 lghi %r10,1 110 111.do_checksum_verification: 112 brasl %r14,verify_sha256_digest 113 114 cghi %r10,1 /* checksum verification only */ 115 je .return_old_kernel 116 cghi %r2,0 /* checksum match */ 117 jne .disabled_wait 118 119 /* If the next kernel is a crash kernel the purgatory has to swap 120 * the mem regions first. 121 */ 122 cghi %r11,1 /* KEXEC_TYPE_CRASH */ 123 je .start_crash_kernel 124 125 /* start normal kernel */ 126 START_NEXT_KERNEL .base_crash 127 128.return_old_kernel: 129 lmg %r6,%r15,gprregs-.base_crash(%r13) 130 br %r14 131 132.disabled_wait: 133 lpswe disabled_wait_psw-.base_crash(%r13) 134 135.start_crash_kernel: 136 /* Location of purgatory_start in crash memory */ 137 lgr %r8,%r13 138 aghi %r8,-(.base_crash-purgatory_start) 139 140 /* Destination for this code i.e. end of memory to be swapped. */ 141 lg %r9,crash_size-.base_crash(%r13) 142 aghi %r9,-(purgatory_end-purgatory_start) 143 144 /* Destination in crash memory, i.e. same as r9 but in crash memory. */ 145 lg %r10,crash_start-.base_crash(%r13) 146 agr %r10,%r9 147 148 /* Buffer location (in crash memory) and size. As the purgatory is 149 * behind the point of no return it can re-use the stack as buffer. 150 */ 151 lghi %r11,bufsz 152 larl %r12,stack 153 154 MEMCPY %r12,%r9,%r11 /* dst -> (crash) buf */ 155 MEMCPY %r9,%r8,%r11 /* self -> dst */ 156 157 /* Jump to new location. */ 158 lgr %r7,%r9 159 aghi %r7,.jump_to_dst-purgatory_start 160 br %r7 161 162.jump_to_dst: 163 basr %r13,0 164.base_dst: 165 166 /* clear buffer */ 167 MEMCPY %r12,%r10,%r11 /* (crash) buf -> (crash) dst */ 168 169 /* Load new buffer location after jump */ 170 larl %r7,stack 171 aghi %r10,stack-purgatory_start 172 MEMCPY %r10,%r7,%r11 /* (new) buf -> (crash) buf */ 173 174 /* Now the code is set up to run from its designated location. Start 175 * swapping the rest of crash memory now. 176 * 177 * The registers will be used as follow: 178 * 179 * %r0-%r4 reserved for macros defined above 180 * %r5-%r6 tmp registers 181 * %r7 pointer to current struct sha region 182 * %r8 index to iterate over all sha regions 183 * %r9 pointer in crash memory 184 * %r10 pointer in old kernel 185 * %r11 total size (still) to be moved 186 * %r12 pointer to buffer 187 */ 188 lgr %r12,%r7 189 lgr %r11,%r9 190 lghi %r10,0 191 lg %r9,crash_start-.base_dst(%r13) 192 lghi %r8,16 /* KEXEC_SEGMENTS_MAX */ 193 larl %r7,purgatory_sha_regions 194 195 j .loop_first 196 197 /* Loop over all purgatory_sha_regions. */ 198.loop_next: 199 aghi %r8,-1 200 cghi %r8,0 201 je .loop_out 202 203 aghi %r7,__KEXEC_SHA_REGION_SIZE 204 205.loop_first: 206 lg %r5,__KEXEC_SHA_REGION_START(%r7) 207 cghi %r5,0 208 je .loop_next 209 210 /* Copy [end last sha region, start current sha region) */ 211 /* Note: kexec_sha_region->start points in crash memory */ 212 sgr %r5,%r9 213 MEMCPY %r9,%r10,%r5 214 215 agr %r9,%r5 216 agr %r10,%r5 217 sgr %r11,%r5 218 219 /* Swap sha region */ 220 lg %r6,__KEXEC_SHA_REGION_LEN(%r7) 221 MEMSWAP %r9,%r10,%r12,%r6 222 sg %r11,__KEXEC_SHA_REGION_LEN(%r7) 223 j .loop_next 224 225.loop_out: 226 /* Copy rest of crash memory */ 227 MEMCPY %r9,%r10,%r11 228 229 /* start crash kernel */ 230 START_NEXT_KERNEL .base_dst 231 232 233load_psw_mask: 234 .long 0x00080000,0x80000000 235 236 .align 8 237disabled_wait_psw: 238 .quad 0x0002000180000000 239 .quad 0x0000000000000000 + .do_checksum_verification 240 241gprregs: 242 .rept 10 243 .quad 0 244 .endr 245 246/* Macro to define a global variable with name and size (in bytes) to be 247 * shared with C code. 248 * 249 * Add the .size and .type attribute to satisfy checks on the Elf_Sym during 250 * purgatory load. 251 */ 252.macro GLOBAL_VARIABLE name,size 253\name: 254 .global \name 255 .size \name,\size 256 .type \name,object 257 .skip \size,0 258.endm 259 260GLOBAL_VARIABLE purgatory_sha256_digest,32 261GLOBAL_VARIABLE purgatory_sha_regions,16*__KEXEC_SHA_REGION_SIZE 262GLOBAL_VARIABLE kernel_entry,8 263GLOBAL_VARIABLE kernel_type,8 264GLOBAL_VARIABLE crash_start,8 265GLOBAL_VARIABLE crash_size,8 266 267 .align PAGE_SIZE 268stack: 269 /* The buffer to move this code must be as big as the code. */ 270 .skip stack-purgatory_start 271 .align PAGE_SIZE 272purgatory_end: 273