xref: /openbmc/linux/arch/s390/kernel/setup.c (revision 10c1d542)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *  S390 version
4  *    Copyright IBM Corp. 1999, 2012
5  *    Author(s): Hartmut Penner (hp@de.ibm.com),
6  *               Martin Schwidefsky (schwidefsky@de.ibm.com)
7  *
8  *  Derived from "arch/i386/kernel/setup.c"
9  *    Copyright (C) 1995, Linus Torvalds
10  */
11 
12 /*
13  * This file handles the architecture-dependent parts of initialization
14  */
15 
16 #define KMSG_COMPONENT "setup"
17 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
18 
19 #include <linux/errno.h>
20 #include <linux/export.h>
21 #include <linux/sched.h>
22 #include <linux/sched/task.h>
23 #include <linux/cpu.h>
24 #include <linux/kernel.h>
25 #include <linux/memblock.h>
26 #include <linux/mm.h>
27 #include <linux/stddef.h>
28 #include <linux/unistd.h>
29 #include <linux/ptrace.h>
30 #include <linux/random.h>
31 #include <linux/user.h>
32 #include <linux/tty.h>
33 #include <linux/ioport.h>
34 #include <linux/delay.h>
35 #include <linux/init.h>
36 #include <linux/initrd.h>
37 #include <linux/bootmem.h>
38 #include <linux/root_dev.h>
39 #include <linux/console.h>
40 #include <linux/kernel_stat.h>
41 #include <linux/dma-contiguous.h>
42 #include <linux/device.h>
43 #include <linux/notifier.h>
44 #include <linux/pfn.h>
45 #include <linux/ctype.h>
46 #include <linux/reboot.h>
47 #include <linux/topology.h>
48 #include <linux/kexec.h>
49 #include <linux/crash_dump.h>
50 #include <linux/memory.h>
51 #include <linux/compat.h>
52 
53 #include <asm/ipl.h>
54 #include <asm/facility.h>
55 #include <asm/smp.h>
56 #include <asm/mmu_context.h>
57 #include <asm/cpcmd.h>
58 #include <asm/lowcore.h>
59 #include <asm/nmi.h>
60 #include <asm/irq.h>
61 #include <asm/page.h>
62 #include <asm/ptrace.h>
63 #include <asm/sections.h>
64 #include <asm/ebcdic.h>
65 #include <asm/diag.h>
66 #include <asm/os_info.h>
67 #include <asm/sclp.h>
68 #include <asm/sysinfo.h>
69 #include <asm/numa.h>
70 #include <asm/alternative.h>
71 #include <asm/nospec-branch.h>
72 #include "entry.h"
73 
74 /*
75  * Machine setup..
76  */
77 unsigned int console_mode = 0;
78 EXPORT_SYMBOL(console_mode);
79 
80 unsigned int console_devno = -1;
81 EXPORT_SYMBOL(console_devno);
82 
83 unsigned int console_irq = -1;
84 EXPORT_SYMBOL(console_irq);
85 
86 unsigned long elf_hwcap __read_mostly = 0;
87 char elf_platform[ELF_PLATFORM_SIZE];
88 
89 unsigned long int_hwcap = 0;
90 
91 int __initdata memory_end_set;
92 unsigned long __initdata memory_end;
93 unsigned long __initdata max_physmem_end;
94 
95 unsigned long VMALLOC_START;
96 EXPORT_SYMBOL(VMALLOC_START);
97 
98 unsigned long VMALLOC_END;
99 EXPORT_SYMBOL(VMALLOC_END);
100 
101 struct page *vmemmap;
102 EXPORT_SYMBOL(vmemmap);
103 
104 unsigned long MODULES_VADDR;
105 unsigned long MODULES_END;
106 
107 /* An array with a pointer to the lowcore of every CPU. */
108 struct lowcore *lowcore_ptr[NR_CPUS];
109 EXPORT_SYMBOL(lowcore_ptr);
110 
111 /*
112  * This is set up by the setup-routine at boot-time
113  * for S390 need to find out, what we have to setup
114  * using address 0x10400 ...
115  */
116 
117 #include <asm/setup.h>
118 
119 /*
120  * condev= and conmode= setup parameter.
121  */
122 
123 static int __init condev_setup(char *str)
124 {
125 	int vdev;
126 
127 	vdev = simple_strtoul(str, &str, 0);
128 	if (vdev >= 0 && vdev < 65536) {
129 		console_devno = vdev;
130 		console_irq = -1;
131 	}
132 	return 1;
133 }
134 
135 __setup("condev=", condev_setup);
136 
137 static void __init set_preferred_console(void)
138 {
139 	if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
140 		add_preferred_console("ttyS", 0, NULL);
141 	else if (CONSOLE_IS_3270)
142 		add_preferred_console("tty3270", 0, NULL);
143 	else if (CONSOLE_IS_VT220)
144 		add_preferred_console("ttyS", 1, NULL);
145 	else if (CONSOLE_IS_HVC)
146 		add_preferred_console("hvc", 0, NULL);
147 }
148 
149 static int __init conmode_setup(char *str)
150 {
151 #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
152 	if (strncmp(str, "hwc", 4) == 0 || strncmp(str, "sclp", 5) == 0)
153                 SET_CONSOLE_SCLP;
154 #endif
155 #if defined(CONFIG_TN3215_CONSOLE)
156 	if (strncmp(str, "3215", 5) == 0)
157 		SET_CONSOLE_3215;
158 #endif
159 #if defined(CONFIG_TN3270_CONSOLE)
160 	if (strncmp(str, "3270", 5) == 0)
161 		SET_CONSOLE_3270;
162 #endif
163 	set_preferred_console();
164         return 1;
165 }
166 
167 __setup("conmode=", conmode_setup);
168 
169 static void __init conmode_default(void)
170 {
171 	char query_buffer[1024];
172 	char *ptr;
173 
174         if (MACHINE_IS_VM) {
175 		cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL);
176 		console_devno = simple_strtoul(query_buffer + 5, NULL, 16);
177 		ptr = strstr(query_buffer, "SUBCHANNEL =");
178 		console_irq = simple_strtoul(ptr + 13, NULL, 16);
179 		cpcmd("QUERY TERM", query_buffer, 1024, NULL);
180 		ptr = strstr(query_buffer, "CONMODE");
181 		/*
182 		 * Set the conmode to 3215 so that the device recognition
183 		 * will set the cu_type of the console to 3215. If the
184 		 * conmode is 3270 and we don't set it back then both
185 		 * 3215 and the 3270 driver will try to access the console
186 		 * device (3215 as console and 3270 as normal tty).
187 		 */
188 		cpcmd("TERM CONMODE 3215", NULL, 0, NULL);
189 		if (ptr == NULL) {
190 #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
191 			SET_CONSOLE_SCLP;
192 #endif
193 			return;
194 		}
195 		if (strncmp(ptr + 8, "3270", 4) == 0) {
196 #if defined(CONFIG_TN3270_CONSOLE)
197 			SET_CONSOLE_3270;
198 #elif defined(CONFIG_TN3215_CONSOLE)
199 			SET_CONSOLE_3215;
200 #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
201 			SET_CONSOLE_SCLP;
202 #endif
203 		} else if (strncmp(ptr + 8, "3215", 4) == 0) {
204 #if defined(CONFIG_TN3215_CONSOLE)
205 			SET_CONSOLE_3215;
206 #elif defined(CONFIG_TN3270_CONSOLE)
207 			SET_CONSOLE_3270;
208 #elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
209 			SET_CONSOLE_SCLP;
210 #endif
211 		}
212 	} else if (MACHINE_IS_KVM) {
213 		if (sclp.has_vt220 && IS_ENABLED(CONFIG_SCLP_VT220_CONSOLE))
214 			SET_CONSOLE_VT220;
215 		else if (sclp.has_linemode && IS_ENABLED(CONFIG_SCLP_CONSOLE))
216 			SET_CONSOLE_SCLP;
217 		else
218 			SET_CONSOLE_HVC;
219 	} else {
220 #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
221 		SET_CONSOLE_SCLP;
222 #endif
223 	}
224 }
225 
226 #ifdef CONFIG_CRASH_DUMP
227 static void __init setup_zfcpdump(void)
228 {
229 	if (ipl_info.type != IPL_TYPE_FCP_DUMP)
230 		return;
231 	if (OLDMEM_BASE)
232 		return;
233 	strcat(boot_command_line, " cio_ignore=all,!ipldev,!condev");
234 	console_loglevel = 2;
235 }
236 #else
237 static inline void setup_zfcpdump(void) {}
238 #endif /* CONFIG_CRASH_DUMP */
239 
240  /*
241  * Reboot, halt and power_off stubs. They just call _machine_restart,
242  * _machine_halt or _machine_power_off.
243  */
244 
245 void machine_restart(char *command)
246 {
247 	if ((!in_interrupt() && !in_atomic()) || oops_in_progress)
248 		/*
249 		 * Only unblank the console if we are called in enabled
250 		 * context or a bust_spinlocks cleared the way for us.
251 		 */
252 		console_unblank();
253 	_machine_restart(command);
254 }
255 
256 void machine_halt(void)
257 {
258 	if (!in_interrupt() || oops_in_progress)
259 		/*
260 		 * Only unblank the console if we are called in enabled
261 		 * context or a bust_spinlocks cleared the way for us.
262 		 */
263 		console_unblank();
264 	_machine_halt();
265 }
266 
267 void machine_power_off(void)
268 {
269 	if (!in_interrupt() || oops_in_progress)
270 		/*
271 		 * Only unblank the console if we are called in enabled
272 		 * context or a bust_spinlocks cleared the way for us.
273 		 */
274 		console_unblank();
275 	_machine_power_off();
276 }
277 
278 /*
279  * Dummy power off function.
280  */
281 void (*pm_power_off)(void) = machine_power_off;
282 EXPORT_SYMBOL_GPL(pm_power_off);
283 
284 static int __init early_parse_mem(char *p)
285 {
286 	memory_end = memparse(p, &p);
287 	memory_end &= PAGE_MASK;
288 	memory_end_set = 1;
289 	return 0;
290 }
291 early_param("mem", early_parse_mem);
292 
293 static int __init parse_vmalloc(char *arg)
294 {
295 	if (!arg)
296 		return -EINVAL;
297 	VMALLOC_END = (memparse(arg, &arg) + PAGE_SIZE - 1) & PAGE_MASK;
298 	return 0;
299 }
300 early_param("vmalloc", parse_vmalloc);
301 
302 void *restart_stack __section(.data);
303 
304 static void __init setup_lowcore(void)
305 {
306 	struct lowcore *lc;
307 
308 	/*
309 	 * Setup lowcore for boot cpu
310 	 */
311 	BUILD_BUG_ON(sizeof(struct lowcore) != LC_PAGES * PAGE_SIZE);
312 	lc = memblock_virt_alloc_low(sizeof(*lc), sizeof(*lc));
313 	lc->restart_psw.mask = PSW_KERNEL_BITS;
314 	lc->restart_psw.addr = (unsigned long) restart_int_handler;
315 	lc->external_new_psw.mask = PSW_KERNEL_BITS |
316 		PSW_MASK_DAT | PSW_MASK_MCHECK;
317 	lc->external_new_psw.addr = (unsigned long) ext_int_handler;
318 	lc->svc_new_psw.mask = PSW_KERNEL_BITS |
319 		PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
320 	lc->svc_new_psw.addr = (unsigned long) system_call;
321 	lc->program_new_psw.mask = PSW_KERNEL_BITS |
322 		PSW_MASK_DAT | PSW_MASK_MCHECK;
323 	lc->program_new_psw.addr = (unsigned long) pgm_check_handler;
324 	lc->mcck_new_psw.mask = PSW_KERNEL_BITS;
325 	lc->mcck_new_psw.addr = (unsigned long) mcck_int_handler;
326 	lc->io_new_psw.mask = PSW_KERNEL_BITS |
327 		PSW_MASK_DAT | PSW_MASK_MCHECK;
328 	lc->io_new_psw.addr = (unsigned long) io_int_handler;
329 	lc->clock_comparator = clock_comparator_max;
330 	lc->kernel_stack = ((unsigned long) &init_thread_union)
331 		+ THREAD_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);
332 	lc->async_stack = (unsigned long)
333 		memblock_virt_alloc(ASYNC_SIZE, ASYNC_SIZE)
334 		+ ASYNC_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);
335 	lc->panic_stack = (unsigned long)
336 		memblock_virt_alloc(PAGE_SIZE, PAGE_SIZE)
337 		+ PAGE_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);
338 	lc->current_task = (unsigned long)&init_task;
339 	lc->lpp = LPP_MAGIC;
340 	lc->machine_flags = S390_lowcore.machine_flags;
341 	lc->preempt_count = S390_lowcore.preempt_count;
342 	lc->stfl_fac_list = S390_lowcore.stfl_fac_list;
343 	memcpy(lc->stfle_fac_list, S390_lowcore.stfle_fac_list,
344 	       sizeof(lc->stfle_fac_list));
345 	memcpy(lc->alt_stfle_fac_list, S390_lowcore.alt_stfle_fac_list,
346 	       sizeof(lc->alt_stfle_fac_list));
347 	nmi_alloc_boot_cpu(lc);
348 	vdso_alloc_boot_cpu(lc);
349 	lc->sync_enter_timer = S390_lowcore.sync_enter_timer;
350 	lc->async_enter_timer = S390_lowcore.async_enter_timer;
351 	lc->exit_timer = S390_lowcore.exit_timer;
352 	lc->user_timer = S390_lowcore.user_timer;
353 	lc->system_timer = S390_lowcore.system_timer;
354 	lc->steal_timer = S390_lowcore.steal_timer;
355 	lc->last_update_timer = S390_lowcore.last_update_timer;
356 	lc->last_update_clock = S390_lowcore.last_update_clock;
357 
358 	restart_stack = memblock_virt_alloc(ASYNC_SIZE, ASYNC_SIZE);
359 	restart_stack += ASYNC_SIZE;
360 
361 	/*
362 	 * Set up PSW restart to call ipl.c:do_restart(). Copy the relevant
363 	 * restart data to the absolute zero lowcore. This is necessary if
364 	 * PSW restart is done on an offline CPU that has lowcore zero.
365 	 */
366 	lc->restart_stack = (unsigned long) restart_stack;
367 	lc->restart_fn = (unsigned long) do_restart;
368 	lc->restart_data = 0;
369 	lc->restart_source = -1UL;
370 
371 	/* Setup absolute zero lowcore */
372 	mem_assign_absolute(S390_lowcore.restart_stack, lc->restart_stack);
373 	mem_assign_absolute(S390_lowcore.restart_fn, lc->restart_fn);
374 	mem_assign_absolute(S390_lowcore.restart_data, lc->restart_data);
375 	mem_assign_absolute(S390_lowcore.restart_source, lc->restart_source);
376 	mem_assign_absolute(S390_lowcore.restart_psw, lc->restart_psw);
377 
378 #ifdef CONFIG_SMP
379 	lc->spinlock_lockval = arch_spin_lockval(0);
380 	lc->spinlock_index = 0;
381 	arch_spin_lock_setup(0);
382 #endif
383 	lc->br_r1_trampoline = 0x07f1;	/* br %r1 */
384 
385 	set_prefix((u32)(unsigned long) lc);
386 	lowcore_ptr[0] = lc;
387 }
388 
389 static struct resource code_resource = {
390 	.name  = "Kernel code",
391 	.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
392 };
393 
394 static struct resource data_resource = {
395 	.name = "Kernel data",
396 	.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
397 };
398 
399 static struct resource bss_resource = {
400 	.name = "Kernel bss",
401 	.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
402 };
403 
404 static struct resource __initdata *standard_resources[] = {
405 	&code_resource,
406 	&data_resource,
407 	&bss_resource,
408 };
409 
410 static void __init setup_resources(void)
411 {
412 	struct resource *res, *std_res, *sub_res;
413 	struct memblock_region *reg;
414 	int j;
415 
416 	code_resource.start = (unsigned long) &_text;
417 	code_resource.end = (unsigned long) &_etext - 1;
418 	data_resource.start = (unsigned long) &_etext;
419 	data_resource.end = (unsigned long) &_edata - 1;
420 	bss_resource.start = (unsigned long) &__bss_start;
421 	bss_resource.end = (unsigned long) &__bss_stop - 1;
422 
423 	for_each_memblock(memory, reg) {
424 		res = memblock_virt_alloc(sizeof(*res), 8);
425 		res->flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM;
426 
427 		res->name = "System RAM";
428 		res->start = reg->base;
429 		res->end = reg->base + reg->size - 1;
430 		request_resource(&iomem_resource, res);
431 
432 		for (j = 0; j < ARRAY_SIZE(standard_resources); j++) {
433 			std_res = standard_resources[j];
434 			if (std_res->start < res->start ||
435 			    std_res->start > res->end)
436 				continue;
437 			if (std_res->end > res->end) {
438 				sub_res = memblock_virt_alloc(sizeof(*sub_res), 8);
439 				*sub_res = *std_res;
440 				sub_res->end = res->end;
441 				std_res->start = res->end + 1;
442 				request_resource(res, sub_res);
443 			} else {
444 				request_resource(res, std_res);
445 			}
446 		}
447 	}
448 #ifdef CONFIG_CRASH_DUMP
449 	/*
450 	 * Re-add removed crash kernel memory as reserved memory. This makes
451 	 * sure it will be mapped with the identity mapping and struct pages
452 	 * will be created, so it can be resized later on.
453 	 * However add it later since the crash kernel resource should not be
454 	 * part of the System RAM resource.
455 	 */
456 	if (crashk_res.end) {
457 		memblock_add_node(crashk_res.start, resource_size(&crashk_res), 0);
458 		memblock_reserve(crashk_res.start, resource_size(&crashk_res));
459 		insert_resource(&iomem_resource, &crashk_res);
460 	}
461 #endif
462 }
463 
464 static void __init setup_memory_end(void)
465 {
466 	unsigned long vmax, vmalloc_size, tmp;
467 
468 	/* Choose kernel address space layout: 2, 3, or 4 levels. */
469 	vmalloc_size = VMALLOC_END ?: (128UL << 30) - MODULES_LEN;
470 	tmp = (memory_end ?: max_physmem_end) / PAGE_SIZE;
471 	tmp = tmp * (sizeof(struct page) + PAGE_SIZE);
472 	if (tmp + vmalloc_size + MODULES_LEN <= _REGION2_SIZE)
473 		vmax = _REGION2_SIZE; /* 3-level kernel page table */
474 	else
475 		vmax = _REGION1_SIZE; /* 4-level kernel page table */
476 	/* module area is at the end of the kernel address space. */
477 	MODULES_END = vmax;
478 	MODULES_VADDR = MODULES_END - MODULES_LEN;
479 	VMALLOC_END = MODULES_VADDR;
480 	VMALLOC_START = vmax - vmalloc_size;
481 
482 	/* Split remaining virtual space between 1:1 mapping & vmemmap array */
483 	tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page));
484 	/* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */
485 	tmp = SECTION_ALIGN_UP(tmp);
486 	tmp = VMALLOC_START - tmp * sizeof(struct page);
487 	tmp &= ~((vmax >> 11) - 1);	/* align to page table level */
488 	tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS);
489 	vmemmap = (struct page *) tmp;
490 
491 	/* Take care that memory_end is set and <= vmemmap */
492 	memory_end = min(memory_end ?: max_physmem_end, tmp);
493 	max_pfn = max_low_pfn = PFN_DOWN(memory_end);
494 	memblock_remove(memory_end, ULONG_MAX);
495 
496 	pr_notice("The maximum memory size is %luMB\n", memory_end >> 20);
497 }
498 
499 #ifdef CONFIG_CRASH_DUMP
500 
501 /*
502  * When kdump is enabled, we have to ensure that no memory from
503  * the area [0 - crashkernel memory size] and
504  * [crashk_res.start - crashk_res.end] is set offline.
505  */
506 static int kdump_mem_notifier(struct notifier_block *nb,
507 			      unsigned long action, void *data)
508 {
509 	struct memory_notify *arg = data;
510 
511 	if (action != MEM_GOING_OFFLINE)
512 		return NOTIFY_OK;
513 	if (arg->start_pfn < PFN_DOWN(resource_size(&crashk_res)))
514 		return NOTIFY_BAD;
515 	if (arg->start_pfn > PFN_DOWN(crashk_res.end))
516 		return NOTIFY_OK;
517 	if (arg->start_pfn + arg->nr_pages - 1 < PFN_DOWN(crashk_res.start))
518 		return NOTIFY_OK;
519 	return NOTIFY_BAD;
520 }
521 
522 static struct notifier_block kdump_mem_nb = {
523 	.notifier_call = kdump_mem_notifier,
524 };
525 
526 #endif
527 
528 /*
529  * Make sure that the area behind memory_end is protected
530  */
531 static void reserve_memory_end(void)
532 {
533 #ifdef CONFIG_CRASH_DUMP
534 	if (ipl_info.type == IPL_TYPE_FCP_DUMP &&
535 	    !OLDMEM_BASE && sclp.hsa_size) {
536 		memory_end = sclp.hsa_size;
537 		memory_end &= PAGE_MASK;
538 		memory_end_set = 1;
539 	}
540 #endif
541 	if (!memory_end_set)
542 		return;
543 	memblock_reserve(memory_end, ULONG_MAX);
544 }
545 
546 /*
547  * Make sure that oldmem, where the dump is stored, is protected
548  */
549 static void reserve_oldmem(void)
550 {
551 #ifdef CONFIG_CRASH_DUMP
552 	if (OLDMEM_BASE)
553 		/* Forget all memory above the running kdump system */
554 		memblock_reserve(OLDMEM_SIZE, (phys_addr_t)ULONG_MAX);
555 #endif
556 }
557 
558 /*
559  * Make sure that oldmem, where the dump is stored, is protected
560  */
561 static void remove_oldmem(void)
562 {
563 #ifdef CONFIG_CRASH_DUMP
564 	if (OLDMEM_BASE)
565 		/* Forget all memory above the running kdump system */
566 		memblock_remove(OLDMEM_SIZE, (phys_addr_t)ULONG_MAX);
567 #endif
568 }
569 
570 /*
571  * Reserve memory for kdump kernel to be loaded with kexec
572  */
573 static void __init reserve_crashkernel(void)
574 {
575 #ifdef CONFIG_CRASH_DUMP
576 	unsigned long long crash_base, crash_size;
577 	phys_addr_t low, high;
578 	int rc;
579 
580 	rc = parse_crashkernel(boot_command_line, memory_end, &crash_size,
581 			       &crash_base);
582 
583 	crash_base = ALIGN(crash_base, KEXEC_CRASH_MEM_ALIGN);
584 	crash_size = ALIGN(crash_size, KEXEC_CRASH_MEM_ALIGN);
585 	if (rc || crash_size == 0)
586 		return;
587 
588 	if (memblock.memory.regions[0].size < crash_size) {
589 		pr_info("crashkernel reservation failed: %s\n",
590 			"first memory chunk must be at least crashkernel size");
591 		return;
592 	}
593 
594 	low = crash_base ?: OLDMEM_BASE;
595 	high = low + crash_size;
596 	if (low >= OLDMEM_BASE && high <= OLDMEM_BASE + OLDMEM_SIZE) {
597 		/* The crashkernel fits into OLDMEM, reuse OLDMEM */
598 		crash_base = low;
599 	} else {
600 		/* Find suitable area in free memory */
601 		low = max_t(unsigned long, crash_size, sclp.hsa_size);
602 		high = crash_base ? crash_base + crash_size : ULONG_MAX;
603 
604 		if (crash_base && crash_base < low) {
605 			pr_info("crashkernel reservation failed: %s\n",
606 				"crash_base too low");
607 			return;
608 		}
609 		low = crash_base ?: low;
610 		crash_base = memblock_find_in_range(low, high, crash_size,
611 						    KEXEC_CRASH_MEM_ALIGN);
612 	}
613 
614 	if (!crash_base) {
615 		pr_info("crashkernel reservation failed: %s\n",
616 			"no suitable area found");
617 		return;
618 	}
619 
620 	if (register_memory_notifier(&kdump_mem_nb))
621 		return;
622 
623 	if (!OLDMEM_BASE && MACHINE_IS_VM)
624 		diag10_range(PFN_DOWN(crash_base), PFN_DOWN(crash_size));
625 	crashk_res.start = crash_base;
626 	crashk_res.end = crash_base + crash_size - 1;
627 	memblock_remove(crash_base, crash_size);
628 	pr_info("Reserving %lluMB of memory at %lluMB "
629 		"for crashkernel (System RAM: %luMB)\n",
630 		crash_size >> 20, crash_base >> 20,
631 		(unsigned long)memblock.memory.total_size >> 20);
632 	os_info_crashkernel_add(crash_base, crash_size);
633 #endif
634 }
635 
636 /*
637  * Reserve the initrd from being used by memblock
638  */
639 static void __init reserve_initrd(void)
640 {
641 #ifdef CONFIG_BLK_DEV_INITRD
642 	if (!INITRD_START || !INITRD_SIZE)
643 		return;
644 	initrd_start = INITRD_START;
645 	initrd_end = initrd_start + INITRD_SIZE;
646 	memblock_reserve(INITRD_START, INITRD_SIZE);
647 #endif
648 }
649 
650 /*
651  * Check for initrd being in usable memory
652  */
653 static void __init check_initrd(void)
654 {
655 #ifdef CONFIG_BLK_DEV_INITRD
656 	if (INITRD_START && INITRD_SIZE &&
657 	    !memblock_is_region_memory(INITRD_START, INITRD_SIZE)) {
658 		pr_err("The initial RAM disk does not fit into the memory\n");
659 		memblock_free(INITRD_START, INITRD_SIZE);
660 		initrd_start = initrd_end = 0;
661 	}
662 #endif
663 }
664 
665 /*
666  * Reserve memory used for lowcore/command line/kernel image.
667  */
668 static void __init reserve_kernel(void)
669 {
670 	unsigned long start_pfn = PFN_UP(__pa(&_end));
671 
672 #ifdef CONFIG_DMA_API_DEBUG
673 	/*
674 	 * DMA_API_DEBUG code stumbles over addresses from the
675 	 * range [_ehead, _stext]. Mark the memory as reserved
676 	 * so it is not used for CONFIG_DMA_API_DEBUG=y.
677 	 */
678 	memblock_reserve(0, PFN_PHYS(start_pfn));
679 #else
680 	memblock_reserve(0, (unsigned long)_ehead);
681 	memblock_reserve((unsigned long)_stext, PFN_PHYS(start_pfn)
682 			 - (unsigned long)_stext);
683 #endif
684 }
685 
686 static void __init setup_memory(void)
687 {
688 	struct memblock_region *reg;
689 
690 	/*
691 	 * Init storage key for present memory
692 	 */
693 	for_each_memblock(memory, reg) {
694 		storage_key_init_range(reg->base, reg->base + reg->size);
695 	}
696 	psw_set_key(PAGE_DEFAULT_KEY);
697 
698 	/* Only cosmetics */
699 	memblock_enforce_memory_limit(memblock_end_of_DRAM());
700 }
701 
702 /*
703  * Setup hardware capabilities.
704  */
705 static int __init setup_hwcaps(void)
706 {
707 	static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 };
708 	struct cpuid cpu_id;
709 	int i;
710 
711 	/*
712 	 * The store facility list bits numbers as found in the principles
713 	 * of operation are numbered with bit 1UL<<31 as number 0 to
714 	 * bit 1UL<<0 as number 31.
715 	 *   Bit 0: instructions named N3, "backported" to esa-mode
716 	 *   Bit 2: z/Architecture mode is active
717 	 *   Bit 7: the store-facility-list-extended facility is installed
718 	 *   Bit 17: the message-security assist is installed
719 	 *   Bit 19: the long-displacement facility is installed
720 	 *   Bit 21: the extended-immediate facility is installed
721 	 *   Bit 22: extended-translation facility 3 is installed
722 	 *   Bit 30: extended-translation facility 3 enhancement facility
723 	 * These get translated to:
724 	 *   HWCAP_S390_ESAN3 bit 0, HWCAP_S390_ZARCH bit 1,
725 	 *   HWCAP_S390_STFLE bit 2, HWCAP_S390_MSA bit 3,
726 	 *   HWCAP_S390_LDISP bit 4, HWCAP_S390_EIMM bit 5 and
727 	 *   HWCAP_S390_ETF3EH bit 8 (22 && 30).
728 	 */
729 	for (i = 0; i < 6; i++)
730 		if (test_facility(stfl_bits[i]))
731 			elf_hwcap |= 1UL << i;
732 
733 	if (test_facility(22) && test_facility(30))
734 		elf_hwcap |= HWCAP_S390_ETF3EH;
735 
736 	/*
737 	 * Check for additional facilities with store-facility-list-extended.
738 	 * stfle stores doublewords (8 byte) with bit 1ULL<<63 as bit 0
739 	 * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information
740 	 * as stored by stfl, bits 32-xxx contain additional facilities.
741 	 * How many facility words are stored depends on the number of
742 	 * doublewords passed to the instruction. The additional facilities
743 	 * are:
744 	 *   Bit 42: decimal floating point facility is installed
745 	 *   Bit 44: perform floating point operation facility is installed
746 	 * translated to:
747 	 *   HWCAP_S390_DFP bit 6 (42 && 44).
748 	 */
749 	if ((elf_hwcap & (1UL << 2)) && test_facility(42) && test_facility(44))
750 		elf_hwcap |= HWCAP_S390_DFP;
751 
752 	/*
753 	 * Huge page support HWCAP_S390_HPAGE is bit 7.
754 	 */
755 	if (MACHINE_HAS_EDAT1)
756 		elf_hwcap |= HWCAP_S390_HPAGE;
757 
758 	/*
759 	 * 64-bit register support for 31-bit processes
760 	 * HWCAP_S390_HIGH_GPRS is bit 9.
761 	 */
762 	elf_hwcap |= HWCAP_S390_HIGH_GPRS;
763 
764 	/*
765 	 * Transactional execution support HWCAP_S390_TE is bit 10.
766 	 */
767 	if (MACHINE_HAS_TE)
768 		elf_hwcap |= HWCAP_S390_TE;
769 
770 	/*
771 	 * Vector extension HWCAP_S390_VXRS is bit 11. The Vector extension
772 	 * can be disabled with the "novx" parameter. Use MACHINE_HAS_VX
773 	 * instead of facility bit 129.
774 	 */
775 	if (MACHINE_HAS_VX) {
776 		elf_hwcap |= HWCAP_S390_VXRS;
777 		if (test_facility(134))
778 			elf_hwcap |= HWCAP_S390_VXRS_EXT;
779 		if (test_facility(135))
780 			elf_hwcap |= HWCAP_S390_VXRS_BCD;
781 	}
782 
783 	/*
784 	 * Guarded storage support HWCAP_S390_GS is bit 12.
785 	 */
786 	if (MACHINE_HAS_GS)
787 		elf_hwcap |= HWCAP_S390_GS;
788 
789 	get_cpu_id(&cpu_id);
790 	add_device_randomness(&cpu_id, sizeof(cpu_id));
791 	switch (cpu_id.machine) {
792 	case 0x2064:
793 	case 0x2066:
794 	default:	/* Use "z900" as default for 64 bit kernels. */
795 		strcpy(elf_platform, "z900");
796 		break;
797 	case 0x2084:
798 	case 0x2086:
799 		strcpy(elf_platform, "z990");
800 		break;
801 	case 0x2094:
802 	case 0x2096:
803 		strcpy(elf_platform, "z9-109");
804 		break;
805 	case 0x2097:
806 	case 0x2098:
807 		strcpy(elf_platform, "z10");
808 		break;
809 	case 0x2817:
810 	case 0x2818:
811 		strcpy(elf_platform, "z196");
812 		break;
813 	case 0x2827:
814 	case 0x2828:
815 		strcpy(elf_platform, "zEC12");
816 		break;
817 	case 0x2964:
818 	case 0x2965:
819 		strcpy(elf_platform, "z13");
820 		break;
821 	case 0x3906:
822 		strcpy(elf_platform, "z14");
823 		break;
824 	}
825 
826 	/*
827 	 * Virtualization support HWCAP_INT_SIE is bit 0.
828 	 */
829 	if (sclp.has_sief2)
830 		int_hwcap |= HWCAP_INT_SIE;
831 
832 	return 0;
833 }
834 arch_initcall(setup_hwcaps);
835 
836 /*
837  * Add system information as device randomness
838  */
839 static void __init setup_randomness(void)
840 {
841 	struct sysinfo_3_2_2 *vmms;
842 
843 	vmms = (struct sysinfo_3_2_2 *) memblock_alloc(PAGE_SIZE, PAGE_SIZE);
844 	if (stsi(vmms, 3, 2, 2) == 0 && vmms->count)
845 		add_device_randomness(&vmms->vm, sizeof(vmms->vm[0]) * vmms->count);
846 	memblock_free((unsigned long) vmms, PAGE_SIZE);
847 }
848 
849 /*
850  * Find the correct size for the task_struct. This depends on
851  * the size of the struct fpu at the end of the thread_struct
852  * which is embedded in the task_struct.
853  */
854 static void __init setup_task_size(void)
855 {
856 	int task_size = sizeof(struct task_struct);
857 
858 	if (!MACHINE_HAS_VX) {
859 		task_size -= sizeof(__vector128) * __NUM_VXRS;
860 		task_size += sizeof(freg_t) * __NUM_FPRS;
861 	}
862 	arch_task_struct_size = task_size;
863 }
864 
865 /*
866  * Setup function called from init/main.c just after the banner
867  * was printed.
868  */
869 
870 void __init setup_arch(char **cmdline_p)
871 {
872         /*
873          * print what head.S has found out about the machine
874          */
875 	if (MACHINE_IS_VM)
876 		pr_info("Linux is running as a z/VM "
877 			"guest operating system in 64-bit mode\n");
878 	else if (MACHINE_IS_KVM)
879 		pr_info("Linux is running under KVM in 64-bit mode\n");
880 	else if (MACHINE_IS_LPAR)
881 		pr_info("Linux is running natively in 64-bit mode\n");
882 
883 	/* Have one command line that is parsed and saved in /proc/cmdline */
884 	/* boot_command_line has been already set up in early.c */
885 	*cmdline_p = boot_command_line;
886 
887         ROOT_DEV = Root_RAM0;
888 
889 	/* Is init_mm really needed? */
890 	init_mm.start_code = PAGE_OFFSET;
891 	init_mm.end_code = (unsigned long) &_etext;
892 	init_mm.end_data = (unsigned long) &_edata;
893 	init_mm.brk = (unsigned long) &_end;
894 
895 	parse_early_param();
896 #ifdef CONFIG_CRASH_DUMP
897 	/* Deactivate elfcorehdr= kernel parameter */
898 	elfcorehdr_addr = ELFCORE_ADDR_MAX;
899 #endif
900 
901 	os_info_init();
902 	setup_ipl();
903 	setup_task_size();
904 
905 	/* Do some memory reservations *before* memory is added to memblock */
906 	reserve_memory_end();
907 	reserve_oldmem();
908 	reserve_kernel();
909 	reserve_initrd();
910 	memblock_allow_resize();
911 
912 	/* Get information about *all* installed memory */
913 	detect_memory_memblock();
914 
915 	remove_oldmem();
916 
917 	/*
918 	 * Make sure all chunks are MAX_ORDER aligned so we don't need the
919 	 * extra checks that HOLES_IN_ZONE would require.
920 	 *
921 	 * Is this still required?
922 	 */
923 	memblock_trim_memory(1UL << (MAX_ORDER - 1 + PAGE_SHIFT));
924 
925 	setup_memory_end();
926 	setup_memory();
927 	dma_contiguous_reserve(memory_end);
928 	vmcp_cma_reserve();
929 
930 	check_initrd();
931 	reserve_crashkernel();
932 #ifdef CONFIG_CRASH_DUMP
933 	/*
934 	 * Be aware that smp_save_dump_cpus() triggers a system reset.
935 	 * Therefore CPU and device initialization should be done afterwards.
936 	 */
937 	smp_save_dump_cpus();
938 #endif
939 
940 	setup_resources();
941 	setup_lowcore();
942 	smp_fill_possible_mask();
943 	cpu_detect_mhz_feature();
944         cpu_init();
945 	numa_setup();
946 	smp_detect_cpus();
947 	topology_init_early();
948 
949 	/*
950 	 * Create kernel page tables and switch to virtual addressing.
951 	 */
952         paging_init();
953 
954         /* Setup default console */
955 	conmode_default();
956 	set_preferred_console();
957 
958 	apply_alternative_instructions();
959 	if (IS_ENABLED(CONFIG_EXPOLINE))
960 		nospec_init_branches();
961 
962 	/* Setup zfcpdump support */
963 	setup_zfcpdump();
964 
965 	/* Add system specific data to the random pool */
966 	setup_randomness();
967 }
968