xref: /openbmc/linux/arch/s390/kernel/perf_cpum_cf.c (revision ab3a560a)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Performance event support for s390x - CPU-measurement Counter Facility
4  *
5  *  Copyright IBM Corp. 2012, 2021
6  *  Author(s): Hendrik Brueckner <brueckner@linux.ibm.com>
7  *	       Thomas Richter <tmricht@linux.ibm.com>
8  */
9 #define KMSG_COMPONENT	"cpum_cf"
10 #define pr_fmt(fmt)	KMSG_COMPONENT ": " fmt
11 
12 #include <linux/kernel.h>
13 #include <linux/kernel_stat.h>
14 #include <linux/percpu.h>
15 #include <linux/notifier.h>
16 #include <linux/init.h>
17 #include <linux/export.h>
18 #include <linux/miscdevice.h>
19 
20 #include <asm/cpu_mcf.h>
21 #include <asm/hwctrset.h>
22 #include <asm/debug.h>
23 
24 static unsigned int cfdiag_cpu_speed;	/* CPU speed for CF_DIAG trailer */
25 static debug_info_t *cf_dbg;
26 
27 #define	CF_DIAG_CTRSET_DEF		0xfeef	/* Counter set header mark */
28 						/* interval in seconds */
29 
30 /* Counter sets are stored as data stream in a page sized memory buffer and
31  * exported to user space via raw data attached to the event sample data.
32  * Each counter set starts with an eight byte header consisting of:
33  * - a two byte eye catcher (0xfeef)
34  * - a one byte counter set number
35  * - a two byte counter set size (indicates the number of counters in this set)
36  * - a three byte reserved value (must be zero) to make the header the same
37  *   size as a counter value.
38  * All counter values are eight byte in size.
39  *
40  * All counter sets are followed by a 64 byte trailer.
41  * The trailer consists of a:
42  * - flag field indicating valid fields when corresponding bit set
43  * - the counter facility first and second version number
44  * - the CPU speed if nonzero
45  * - the time stamp the counter sets have been collected
46  * - the time of day (TOD) base value
47  * - the machine type.
48  *
49  * The counter sets are saved when the process is prepared to be executed on a
50  * CPU and saved again when the process is going to be removed from a CPU.
51  * The difference of both counter sets are calculated and stored in the event
52  * sample data area.
53  */
54 struct cf_ctrset_entry {	/* CPU-M CF counter set entry (8 byte) */
55 	unsigned int def:16;	/* 0-15  Data Entry Format */
56 	unsigned int set:16;	/* 16-31 Counter set identifier */
57 	unsigned int ctr:16;	/* 32-47 Number of stored counters */
58 	unsigned int res1:16;	/* 48-63 Reserved */
59 };
60 
61 struct cf_trailer_entry {	/* CPU-M CF_DIAG trailer (64 byte) */
62 	/* 0 - 7 */
63 	union {
64 		struct {
65 			unsigned int clock_base:1;	/* TOD clock base set */
66 			unsigned int speed:1;		/* CPU speed set */
67 			/* Measurement alerts */
68 			unsigned int mtda:1;	/* Loss of MT ctr. data alert */
69 			unsigned int caca:1;	/* Counter auth. change alert */
70 			unsigned int lcda:1;	/* Loss of counter data alert */
71 		};
72 		unsigned long flags;	/* 0-63    All indicators */
73 	};
74 	/* 8 - 15 */
75 	unsigned int cfvn:16;			/* 64-79   Ctr First Version */
76 	unsigned int csvn:16;			/* 80-95   Ctr Second Version */
77 	unsigned int cpu_speed:32;		/* 96-127  CPU speed */
78 	/* 16 - 23 */
79 	unsigned long timestamp;		/* 128-191 Timestamp (TOD) */
80 	/* 24 - 55 */
81 	union {
82 		struct {
83 			unsigned long progusage1;
84 			unsigned long progusage2;
85 			unsigned long progusage3;
86 			unsigned long tod_base;
87 		};
88 		unsigned long progusage[4];
89 	};
90 	/* 56 - 63 */
91 	unsigned int mach_type:16;		/* Machine type */
92 	unsigned int res1:16;			/* Reserved */
93 	unsigned int res2:32;			/* Reserved */
94 };
95 
96 /* Create the trailer data at the end of a page. */
97 static void cfdiag_trailer(struct cf_trailer_entry *te)
98 {
99 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
100 	struct cpuid cpuid;
101 
102 	te->cfvn = cpuhw->info.cfvn;		/* Counter version numbers */
103 	te->csvn = cpuhw->info.csvn;
104 
105 	get_cpu_id(&cpuid);			/* Machine type */
106 	te->mach_type = cpuid.machine;
107 	te->cpu_speed = cfdiag_cpu_speed;
108 	if (te->cpu_speed)
109 		te->speed = 1;
110 	te->clock_base = 1;			/* Save clock base */
111 	te->tod_base = tod_clock_base.tod;
112 	te->timestamp = get_tod_clock_fast();
113 }
114 
115 /* Read a counter set. The counter set number determines the counter set and
116  * the CPUM-CF first and second version number determine the number of
117  * available counters in each counter set.
118  * Each counter set starts with header containing the counter set number and
119  * the number of eight byte counters.
120  *
121  * The functions returns the number of bytes occupied by this counter set
122  * including the header.
123  * If there is no counter in the counter set, this counter set is useless and
124  * zero is returned on this case.
125  *
126  * Note that the counter sets may not be enabled or active and the stcctm
127  * instruction might return error 3. Depending on error_ok value this is ok,
128  * for example when called from cpumf_pmu_start() call back function.
129  */
130 static size_t cfdiag_getctrset(struct cf_ctrset_entry *ctrdata, int ctrset,
131 			       size_t room, bool error_ok)
132 {
133 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
134 	size_t ctrset_size, need = 0;
135 	int rc = 3;				/* Assume write failure */
136 
137 	ctrdata->def = CF_DIAG_CTRSET_DEF;
138 	ctrdata->set = ctrset;
139 	ctrdata->res1 = 0;
140 	ctrset_size = cpum_cf_ctrset_size(ctrset, &cpuhw->info);
141 
142 	if (ctrset_size) {			/* Save data */
143 		need = ctrset_size * sizeof(u64) + sizeof(*ctrdata);
144 		if (need <= room) {
145 			rc = ctr_stcctm(ctrset, ctrset_size,
146 					(u64 *)(ctrdata + 1));
147 		}
148 		if (rc != 3 || error_ok)
149 			ctrdata->ctr = ctrset_size;
150 		else
151 			need = 0;
152 	}
153 
154 	debug_sprintf_event(cf_dbg, 3,
155 			    "%s ctrset %d ctrset_size %zu cfvn %d csvn %d"
156 			    " need %zd rc %d\n", __func__, ctrset, ctrset_size,
157 			    cpuhw->info.cfvn, cpuhw->info.csvn, need, rc);
158 	return need;
159 }
160 
161 static const u64 cpumf_ctr_ctl[CPUMF_CTR_SET_MAX] = {
162 	[CPUMF_CTR_SET_BASIC]	= 0x02,
163 	[CPUMF_CTR_SET_USER]	= 0x04,
164 	[CPUMF_CTR_SET_CRYPTO]	= 0x08,
165 	[CPUMF_CTR_SET_EXT]	= 0x01,
166 	[CPUMF_CTR_SET_MT_DIAG] = 0x20,
167 };
168 
169 /* Read out all counter sets and save them in the provided data buffer.
170  * The last 64 byte host an artificial trailer entry.
171  */
172 static size_t cfdiag_getctr(void *data, size_t sz, unsigned long auth,
173 			    bool error_ok)
174 {
175 	struct cf_trailer_entry *trailer;
176 	size_t offset = 0, done;
177 	int i;
178 
179 	memset(data, 0, sz);
180 	sz -= sizeof(*trailer);		/* Always room for trailer */
181 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
182 		struct cf_ctrset_entry *ctrdata = data + offset;
183 
184 		if (!(auth & cpumf_ctr_ctl[i]))
185 			continue;	/* Counter set not authorized */
186 
187 		done = cfdiag_getctrset(ctrdata, i, sz - offset, error_ok);
188 		offset += done;
189 	}
190 	trailer = data + offset;
191 	cfdiag_trailer(trailer);
192 	return offset + sizeof(*trailer);
193 }
194 
195 /* Calculate the difference for each counter in a counter set. */
196 static void cfdiag_diffctrset(u64 *pstart, u64 *pstop, int counters)
197 {
198 	for (; --counters >= 0; ++pstart, ++pstop)
199 		if (*pstop >= *pstart)
200 			*pstop -= *pstart;
201 		else
202 			*pstop = *pstart - *pstop + 1;
203 }
204 
205 /* Scan the counter sets and calculate the difference of each counter
206  * in each set. The result is the increment of each counter during the
207  * period the counter set has been activated.
208  *
209  * Return true on success.
210  */
211 static int cfdiag_diffctr(struct cpu_cf_events *cpuhw, unsigned long auth)
212 {
213 	struct cf_trailer_entry *trailer_start, *trailer_stop;
214 	struct cf_ctrset_entry *ctrstart, *ctrstop;
215 	size_t offset = 0;
216 
217 	auth &= (1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1;
218 	do {
219 		ctrstart = (struct cf_ctrset_entry *)(cpuhw->start + offset);
220 		ctrstop = (struct cf_ctrset_entry *)(cpuhw->stop + offset);
221 
222 		if (memcmp(ctrstop, ctrstart, sizeof(*ctrstop))) {
223 			pr_err_once("cpum_cf_diag counter set compare error "
224 				    "in set %i\n", ctrstart->set);
225 			return 0;
226 		}
227 		auth &= ~cpumf_ctr_ctl[ctrstart->set];
228 		if (ctrstart->def == CF_DIAG_CTRSET_DEF) {
229 			cfdiag_diffctrset((u64 *)(ctrstart + 1),
230 					  (u64 *)(ctrstop + 1), ctrstart->ctr);
231 			offset += ctrstart->ctr * sizeof(u64) +
232 							sizeof(*ctrstart);
233 		}
234 	} while (ctrstart->def && auth);
235 
236 	/* Save time_stamp from start of event in stop's trailer */
237 	trailer_start = (struct cf_trailer_entry *)(cpuhw->start + offset);
238 	trailer_stop = (struct cf_trailer_entry *)(cpuhw->stop + offset);
239 	trailer_stop->progusage[0] = trailer_start->timestamp;
240 
241 	return 1;
242 }
243 
244 static enum cpumf_ctr_set get_counter_set(u64 event)
245 {
246 	int set = CPUMF_CTR_SET_MAX;
247 
248 	if (event < 32)
249 		set = CPUMF_CTR_SET_BASIC;
250 	else if (event < 64)
251 		set = CPUMF_CTR_SET_USER;
252 	else if (event < 128)
253 		set = CPUMF_CTR_SET_CRYPTO;
254 	else if (event < 288)
255 		set = CPUMF_CTR_SET_EXT;
256 	else if (event >= 448 && event < 496)
257 		set = CPUMF_CTR_SET_MT_DIAG;
258 
259 	return set;
260 }
261 
262 static int validate_ctr_version(const struct hw_perf_event *hwc,
263 				enum cpumf_ctr_set set)
264 {
265 	struct cpu_cf_events *cpuhw;
266 	int err = 0;
267 	u16 mtdiag_ctl;
268 
269 	cpuhw = &get_cpu_var(cpu_cf_events);
270 
271 	/* check required version for counter sets */
272 	switch (set) {
273 	case CPUMF_CTR_SET_BASIC:
274 	case CPUMF_CTR_SET_USER:
275 		if (cpuhw->info.cfvn < 1)
276 			err = -EOPNOTSUPP;
277 		break;
278 	case CPUMF_CTR_SET_CRYPTO:
279 		if ((cpuhw->info.csvn >= 1 && cpuhw->info.csvn <= 5 &&
280 		     hwc->config > 79) ||
281 		    (cpuhw->info.csvn >= 6 && hwc->config > 83))
282 			err = -EOPNOTSUPP;
283 		break;
284 	case CPUMF_CTR_SET_EXT:
285 		if (cpuhw->info.csvn < 1)
286 			err = -EOPNOTSUPP;
287 		if ((cpuhw->info.csvn == 1 && hwc->config > 159) ||
288 		    (cpuhw->info.csvn == 2 && hwc->config > 175) ||
289 		    (cpuhw->info.csvn >= 3 && cpuhw->info.csvn <= 5
290 		     && hwc->config > 255) ||
291 		    (cpuhw->info.csvn >= 6 && hwc->config > 287))
292 			err = -EOPNOTSUPP;
293 		break;
294 	case CPUMF_CTR_SET_MT_DIAG:
295 		if (cpuhw->info.csvn <= 3)
296 			err = -EOPNOTSUPP;
297 		/*
298 		 * MT-diagnostic counters are read-only.  The counter set
299 		 * is automatically enabled and activated on all CPUs with
300 		 * multithreading (SMT).  Deactivation of multithreading
301 		 * also disables the counter set.  State changes are ignored
302 		 * by lcctl().	Because Linux controls SMT enablement through
303 		 * a kernel parameter only, the counter set is either disabled
304 		 * or enabled and active.
305 		 *
306 		 * Thus, the counters can only be used if SMT is on and the
307 		 * counter set is enabled and active.
308 		 */
309 		mtdiag_ctl = cpumf_ctr_ctl[CPUMF_CTR_SET_MT_DIAG];
310 		if (!((cpuhw->info.auth_ctl & mtdiag_ctl) &&
311 		      (cpuhw->info.enable_ctl & mtdiag_ctl) &&
312 		      (cpuhw->info.act_ctl & mtdiag_ctl)))
313 			err = -EOPNOTSUPP;
314 		break;
315 	case CPUMF_CTR_SET_MAX:
316 		err = -EOPNOTSUPP;
317 	}
318 
319 	put_cpu_var(cpu_cf_events);
320 	return err;
321 }
322 
323 static int validate_ctr_auth(const struct hw_perf_event *hwc)
324 {
325 	struct cpu_cf_events *cpuhw;
326 	int err = 0;
327 
328 	cpuhw = &get_cpu_var(cpu_cf_events);
329 
330 	/* Check authorization for cpu counter sets.
331 	 * If the particular CPU counter set is not authorized,
332 	 * return with -ENOENT in order to fall back to other
333 	 * PMUs that might suffice the event request.
334 	 */
335 	if (!(hwc->config_base & cpuhw->info.auth_ctl))
336 		err = -ENOENT;
337 
338 	put_cpu_var(cpu_cf_events);
339 	return err;
340 }
341 
342 /*
343  * Change the CPUMF state to active.
344  * Enable and activate the CPU-counter sets according
345  * to the per-cpu control state.
346  */
347 static void cpumf_pmu_enable(struct pmu *pmu)
348 {
349 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
350 	int err;
351 
352 	if (cpuhw->flags & PMU_F_ENABLED)
353 		return;
354 
355 	err = lcctl(cpuhw->state | cpuhw->dev_state);
356 	if (err) {
357 		pr_err("Enabling the performance measuring unit "
358 		       "failed with rc=%x\n", err);
359 		return;
360 	}
361 
362 	cpuhw->flags |= PMU_F_ENABLED;
363 }
364 
365 /*
366  * Change the CPUMF state to inactive.
367  * Disable and enable (inactive) the CPU-counter sets according
368  * to the per-cpu control state.
369  */
370 static void cpumf_pmu_disable(struct pmu *pmu)
371 {
372 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
373 	int err;
374 	u64 inactive;
375 
376 	if (!(cpuhw->flags & PMU_F_ENABLED))
377 		return;
378 
379 	inactive = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1);
380 	inactive |= cpuhw->dev_state;
381 	err = lcctl(inactive);
382 	if (err) {
383 		pr_err("Disabling the performance measuring unit "
384 		       "failed with rc=%x\n", err);
385 		return;
386 	}
387 
388 	cpuhw->flags &= ~PMU_F_ENABLED;
389 }
390 
391 
392 /* Number of perf events counting hardware events */
393 static atomic_t num_events = ATOMIC_INIT(0);
394 /* Used to avoid races in calling reserve/release_cpumf_hardware */
395 static DEFINE_MUTEX(pmc_reserve_mutex);
396 
397 /* Release the PMU if event is the last perf event */
398 static void hw_perf_event_destroy(struct perf_event *event)
399 {
400 	if (!atomic_add_unless(&num_events, -1, 1)) {
401 		mutex_lock(&pmc_reserve_mutex);
402 		if (atomic_dec_return(&num_events) == 0)
403 			__kernel_cpumcf_end();
404 		mutex_unlock(&pmc_reserve_mutex);
405 	}
406 }
407 
408 /* CPUMF <-> perf event mappings for kernel+userspace (basic set) */
409 static const int cpumf_generic_events_basic[] = {
410 	[PERF_COUNT_HW_CPU_CYCLES]	    = 0,
411 	[PERF_COUNT_HW_INSTRUCTIONS]	    = 1,
412 	[PERF_COUNT_HW_CACHE_REFERENCES]    = -1,
413 	[PERF_COUNT_HW_CACHE_MISSES]	    = -1,
414 	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1,
415 	[PERF_COUNT_HW_BRANCH_MISSES]	    = -1,
416 	[PERF_COUNT_HW_BUS_CYCLES]	    = -1,
417 };
418 /* CPUMF <-> perf event mappings for userspace (problem-state set) */
419 static const int cpumf_generic_events_user[] = {
420 	[PERF_COUNT_HW_CPU_CYCLES]	    = 32,
421 	[PERF_COUNT_HW_INSTRUCTIONS]	    = 33,
422 	[PERF_COUNT_HW_CACHE_REFERENCES]    = -1,
423 	[PERF_COUNT_HW_CACHE_MISSES]	    = -1,
424 	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1,
425 	[PERF_COUNT_HW_BRANCH_MISSES]	    = -1,
426 	[PERF_COUNT_HW_BUS_CYCLES]	    = -1,
427 };
428 
429 static void cpumf_hw_inuse(void)
430 {
431 	mutex_lock(&pmc_reserve_mutex);
432 	if (atomic_inc_return(&num_events) == 1)
433 		__kernel_cpumcf_begin();
434 	mutex_unlock(&pmc_reserve_mutex);
435 }
436 
437 static int __hw_perf_event_init(struct perf_event *event, unsigned int type)
438 {
439 	struct perf_event_attr *attr = &event->attr;
440 	struct hw_perf_event *hwc = &event->hw;
441 	enum cpumf_ctr_set set;
442 	int err = 0;
443 	u64 ev;
444 
445 	switch (type) {
446 	case PERF_TYPE_RAW:
447 		/* Raw events are used to access counters directly,
448 		 * hence do not permit excludes */
449 		if (attr->exclude_kernel || attr->exclude_user ||
450 		    attr->exclude_hv)
451 			return -EOPNOTSUPP;
452 		ev = attr->config;
453 		break;
454 
455 	case PERF_TYPE_HARDWARE:
456 		if (is_sampling_event(event))	/* No sampling support */
457 			return -ENOENT;
458 		ev = attr->config;
459 		/* Count user space (problem-state) only */
460 		if (!attr->exclude_user && attr->exclude_kernel) {
461 			if (ev >= ARRAY_SIZE(cpumf_generic_events_user))
462 				return -EOPNOTSUPP;
463 			ev = cpumf_generic_events_user[ev];
464 
465 		/* No support for kernel space counters only */
466 		} else if (!attr->exclude_kernel && attr->exclude_user) {
467 			return -EOPNOTSUPP;
468 		} else {	/* Count user and kernel space */
469 			if (ev >= ARRAY_SIZE(cpumf_generic_events_basic))
470 				return -EOPNOTSUPP;
471 			ev = cpumf_generic_events_basic[ev];
472 		}
473 		break;
474 
475 	default:
476 		return -ENOENT;
477 	}
478 
479 	if (ev == -1)
480 		return -ENOENT;
481 
482 	if (ev > PERF_CPUM_CF_MAX_CTR)
483 		return -ENOENT;
484 
485 	/* Obtain the counter set to which the specified counter belongs */
486 	set = get_counter_set(ev);
487 	switch (set) {
488 	case CPUMF_CTR_SET_BASIC:
489 	case CPUMF_CTR_SET_USER:
490 	case CPUMF_CTR_SET_CRYPTO:
491 	case CPUMF_CTR_SET_EXT:
492 	case CPUMF_CTR_SET_MT_DIAG:
493 		/*
494 		 * Use the hardware perf event structure to store the
495 		 * counter number in the 'config' member and the counter
496 		 * set number in the 'config_base' as bit mask.
497 		 * It is later used to enable/disable the counter(s).
498 		 */
499 		hwc->config = ev;
500 		hwc->config_base = cpumf_ctr_ctl[set];
501 		break;
502 	case CPUMF_CTR_SET_MAX:
503 		/* The counter could not be associated to a counter set */
504 		return -EINVAL;
505 	}
506 
507 	/* Initialize for using the CPU-measurement counter facility */
508 	cpumf_hw_inuse();
509 	event->destroy = hw_perf_event_destroy;
510 
511 	/* Finally, validate version and authorization of the counter set */
512 	err = validate_ctr_auth(hwc);
513 	if (!err)
514 		err = validate_ctr_version(hwc, set);
515 
516 	return err;
517 }
518 
519 static int cpumf_pmu_event_init(struct perf_event *event)
520 {
521 	unsigned int type = event->attr.type;
522 	int err;
523 
524 	if (type == PERF_TYPE_HARDWARE || type == PERF_TYPE_RAW)
525 		err = __hw_perf_event_init(event, type);
526 	else if (event->pmu->type == type)
527 		/* Registered as unknown PMU */
528 		err = __hw_perf_event_init(event, PERF_TYPE_RAW);
529 	else
530 		return -ENOENT;
531 
532 	if (unlikely(err) && event->destroy)
533 		event->destroy(event);
534 
535 	return err;
536 }
537 
538 static int hw_perf_event_reset(struct perf_event *event)
539 {
540 	u64 prev, new;
541 	int err;
542 
543 	do {
544 		prev = local64_read(&event->hw.prev_count);
545 		err = ecctr(event->hw.config, &new);
546 		if (err) {
547 			if (err != 3)
548 				break;
549 			/* The counter is not (yet) available. This
550 			 * might happen if the counter set to which
551 			 * this counter belongs is in the disabled
552 			 * state.
553 			 */
554 			new = 0;
555 		}
556 	} while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
557 
558 	return err;
559 }
560 
561 static void hw_perf_event_update(struct perf_event *event)
562 {
563 	u64 prev, new, delta;
564 	int err;
565 
566 	do {
567 		prev = local64_read(&event->hw.prev_count);
568 		err = ecctr(event->hw.config, &new);
569 		if (err)
570 			return;
571 	} while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
572 
573 	delta = (prev <= new) ? new - prev
574 			      : (-1ULL - prev) + new + 1;	 /* overflow */
575 	local64_add(delta, &event->count);
576 }
577 
578 static void cpumf_pmu_read(struct perf_event *event)
579 {
580 	if (event->hw.state & PERF_HES_STOPPED)
581 		return;
582 
583 	hw_perf_event_update(event);
584 }
585 
586 static void cpumf_pmu_start(struct perf_event *event, int flags)
587 {
588 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
589 	struct hw_perf_event *hwc = &event->hw;
590 	int i;
591 
592 	if (!(hwc->state & PERF_HES_STOPPED))
593 		return;
594 
595 	hwc->state = 0;
596 
597 	/* (Re-)enable and activate the counter set */
598 	ctr_set_enable(&cpuhw->state, hwc->config_base);
599 	ctr_set_start(&cpuhw->state, hwc->config_base);
600 
601 	/* The counter set to which this counter belongs can be already active.
602 	 * Because all counters in a set are active, the event->hw.prev_count
603 	 * needs to be synchronized.  At this point, the counter set can be in
604 	 * the inactive or disabled state.
605 	 */
606 	if (hwc->config == PERF_EVENT_CPUM_CF_DIAG) {
607 		cpuhw->usedss = cfdiag_getctr(cpuhw->start,
608 					      sizeof(cpuhw->start),
609 					      hwc->config_base, true);
610 	} else {
611 		hw_perf_event_reset(event);
612 	}
613 
614 	/* Increment refcount for counter sets */
615 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i)
616 		if ((hwc->config_base & cpumf_ctr_ctl[i]))
617 			atomic_inc(&cpuhw->ctr_set[i]);
618 }
619 
620 /* Create perf event sample with the counter sets as raw data.	The sample
621  * is then pushed to the event subsystem and the function checks for
622  * possible event overflows. If an event overflow occurs, the PMU is
623  * stopped.
624  *
625  * Return non-zero if an event overflow occurred.
626  */
627 static int cfdiag_push_sample(struct perf_event *event,
628 			      struct cpu_cf_events *cpuhw)
629 {
630 	struct perf_sample_data data;
631 	struct perf_raw_record raw;
632 	struct pt_regs regs;
633 	int overflow;
634 
635 	/* Setup perf sample */
636 	perf_sample_data_init(&data, 0, event->hw.last_period);
637 	memset(&regs, 0, sizeof(regs));
638 	memset(&raw, 0, sizeof(raw));
639 
640 	if (event->attr.sample_type & PERF_SAMPLE_CPU)
641 		data.cpu_entry.cpu = event->cpu;
642 	if (event->attr.sample_type & PERF_SAMPLE_RAW) {
643 		raw.frag.size = cpuhw->usedss;
644 		raw.frag.data = cpuhw->stop;
645 		raw.size = raw.frag.size;
646 		data.raw = &raw;
647 	}
648 
649 	overflow = perf_event_overflow(event, &data, &regs);
650 	debug_sprintf_event(cf_dbg, 3,
651 			    "%s event %#llx sample_type %#llx raw %d ov %d\n",
652 			    __func__, event->hw.config,
653 			    event->attr.sample_type, raw.size, overflow);
654 	if (overflow)
655 		event->pmu->stop(event, 0);
656 
657 	perf_event_update_userpage(event);
658 	return overflow;
659 }
660 
661 static void cpumf_pmu_stop(struct perf_event *event, int flags)
662 {
663 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
664 	struct hw_perf_event *hwc = &event->hw;
665 	int i;
666 
667 	if (!(hwc->state & PERF_HES_STOPPED)) {
668 		/* Decrement reference count for this counter set and if this
669 		 * is the last used counter in the set, clear activation
670 		 * control and set the counter set state to inactive.
671 		 */
672 		for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
673 			if (!(hwc->config_base & cpumf_ctr_ctl[i]))
674 				continue;
675 			if (!atomic_dec_return(&cpuhw->ctr_set[i]))
676 				ctr_set_stop(&cpuhw->state, cpumf_ctr_ctl[i]);
677 		}
678 		hwc->state |= PERF_HES_STOPPED;
679 	}
680 
681 	if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
682 		if (hwc->config == PERF_EVENT_CPUM_CF_DIAG) {
683 			local64_inc(&event->count);
684 			cpuhw->usedss = cfdiag_getctr(cpuhw->stop,
685 						      sizeof(cpuhw->stop),
686 						      event->hw.config_base,
687 						      false);
688 			if (cfdiag_diffctr(cpuhw, event->hw.config_base))
689 				cfdiag_push_sample(event, cpuhw);
690 		} else if (cpuhw->flags & PMU_F_RESERVED) {
691 			/* Only update when PMU not hotplugged off */
692 			hw_perf_event_update(event);
693 		}
694 		hwc->state |= PERF_HES_UPTODATE;
695 	}
696 }
697 
698 static int cpumf_pmu_add(struct perf_event *event, int flags)
699 {
700 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
701 
702 	ctr_set_enable(&cpuhw->state, event->hw.config_base);
703 	event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
704 
705 	if (flags & PERF_EF_START)
706 		cpumf_pmu_start(event, PERF_EF_RELOAD);
707 
708 	return 0;
709 }
710 
711 static void cpumf_pmu_del(struct perf_event *event, int flags)
712 {
713 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
714 	int i;
715 
716 	cpumf_pmu_stop(event, PERF_EF_UPDATE);
717 
718 	/* Check if any counter in the counter set is still used.  If not used,
719 	 * change the counter set to the disabled state.  This also clears the
720 	 * content of all counters in the set.
721 	 *
722 	 * When a new perf event has been added but not yet started, this can
723 	 * clear enable control and resets all counters in a set.  Therefore,
724 	 * cpumf_pmu_start() always has to reenable a counter set.
725 	 */
726 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i)
727 		if (!atomic_read(&cpuhw->ctr_set[i]))
728 			ctr_set_disable(&cpuhw->state, cpumf_ctr_ctl[i]);
729 }
730 
731 /* Performance monitoring unit for s390x */
732 static struct pmu cpumf_pmu = {
733 	.task_ctx_nr  = perf_sw_context,
734 	.capabilities = PERF_PMU_CAP_NO_INTERRUPT,
735 	.pmu_enable   = cpumf_pmu_enable,
736 	.pmu_disable  = cpumf_pmu_disable,
737 	.event_init   = cpumf_pmu_event_init,
738 	.add	      = cpumf_pmu_add,
739 	.del	      = cpumf_pmu_del,
740 	.start	      = cpumf_pmu_start,
741 	.stop	      = cpumf_pmu_stop,
742 	.read	      = cpumf_pmu_read,
743 };
744 
745 static int cfset_init(void);
746 static int __init cpumf_pmu_init(void)
747 {
748 	int rc;
749 
750 	if (!kernel_cpumcf_avail())
751 		return -ENODEV;
752 
753 	/* Setup s390dbf facility */
754 	cf_dbg = debug_register(KMSG_COMPONENT, 2, 1, 128);
755 	if (!cf_dbg) {
756 		pr_err("Registration of s390dbf(cpum_cf) failed\n");
757 		return -ENOMEM;
758 	}
759 	debug_register_view(cf_dbg, &debug_sprintf_view);
760 
761 	cpumf_pmu.attr_groups = cpumf_cf_event_group();
762 	rc = perf_pmu_register(&cpumf_pmu, "cpum_cf", -1);
763 	if (rc) {
764 		debug_unregister_view(cf_dbg, &debug_sprintf_view);
765 		debug_unregister(cf_dbg);
766 		pr_err("Registering the cpum_cf PMU failed with rc=%i\n", rc);
767 	} else if (stccm_avail()) {	/* Setup counter set device */
768 		cfset_init();
769 	}
770 	return rc;
771 }
772 
773 /* Support for the CPU Measurement Facility counter set extraction using
774  * device /dev/hwctr. This allows user space programs to extract complete
775  * counter set via normal file operations.
776  */
777 
778 static atomic_t cfset_opencnt = ATOMIC_INIT(0);		/* Access count */
779 static DEFINE_MUTEX(cfset_ctrset_mutex);/* Synchronize access to hardware */
780 struct cfset_call_on_cpu_parm {		/* Parm struct for smp_call_on_cpu */
781 	unsigned int sets;		/* Counter set bit mask */
782 	atomic_t cpus_ack;		/* # CPUs successfully executed func */
783 };
784 
785 static struct cfset_session {		/* CPUs and counter set bit mask */
786 	struct list_head head;		/* Head of list of active processes */
787 } cfset_session = {
788 	.head = LIST_HEAD_INIT(cfset_session.head)
789 };
790 
791 struct cfset_request {			/* CPUs and counter set bit mask */
792 	unsigned long ctrset;		/* Bit mask of counter set to read */
793 	cpumask_t mask;			/* CPU mask to read from */
794 	struct list_head node;		/* Chain to cfset_session.head */
795 };
796 
797 static void cfset_session_init(void)
798 {
799 	INIT_LIST_HEAD(&cfset_session.head);
800 }
801 
802 /* Remove current request from global bookkeeping. Maintain a counter set bit
803  * mask on a per CPU basis.
804  * Done in process context under mutex protection.
805  */
806 static void cfset_session_del(struct cfset_request *p)
807 {
808 	list_del(&p->node);
809 }
810 
811 /* Add current request to global bookkeeping. Maintain a counter set bit mask
812  * on a per CPU basis.
813  * Done in process context under mutex protection.
814  */
815 static void cfset_session_add(struct cfset_request *p)
816 {
817 	list_add(&p->node, &cfset_session.head);
818 }
819 
820 /* The /dev/hwctr device access uses PMU_F_IN_USE to mark the device access
821  * path is currently used.
822  * The cpu_cf_events::dev_state is used to denote counter sets in use by this
823  * interface. It is always or'ed in. If this interface is not active, its
824  * value is zero and no additional counter sets will be included.
825  *
826  * The cpu_cf_events::state is used by the perf_event_open SVC and remains
827  * unchanged.
828  *
829  * perf_pmu_enable() and perf_pmu_enable() and its call backs
830  * cpumf_pmu_enable() and  cpumf_pmu_disable() are called by the
831  * performance measurement subsystem to enable per process
832  * CPU Measurement counter facility.
833  * The XXX_enable() and XXX_disable functions are used to turn off
834  * x86 performance monitoring interrupt (PMI) during scheduling.
835  * s390 uses these calls to temporarily stop and resume the active CPU
836  * counters sets during scheduling.
837  *
838  * We do allow concurrent access of perf_event_open() SVC and /dev/hwctr
839  * device access.  The perf_event_open() SVC interface makes a lot of effort
840  * to only run the counters while the calling process is actively scheduled
841  * to run.
842  * When /dev/hwctr interface is also used at the same time, the counter sets
843  * will keep running, even when the process is scheduled off a CPU.
844  * However this is not a problem and does not lead to wrong counter values
845  * for the perf_event_open() SVC. The current counter value will be recorded
846  * during schedule-in. At schedule-out time the current counter value is
847  * extracted again and the delta is calculated and added to the event.
848  */
849 /* Stop all counter sets via ioctl interface */
850 static void cfset_ioctl_off(void *parm)
851 {
852 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
853 	struct cfset_call_on_cpu_parm *p = parm;
854 	int rc;
855 
856 	/* Check if any counter set used by /dev/hwc */
857 	for (rc = CPUMF_CTR_SET_BASIC; rc < CPUMF_CTR_SET_MAX; ++rc)
858 		if ((p->sets & cpumf_ctr_ctl[rc])) {
859 			if (!atomic_dec_return(&cpuhw->ctr_set[rc])) {
860 				ctr_set_disable(&cpuhw->dev_state,
861 						cpumf_ctr_ctl[rc]);
862 				ctr_set_stop(&cpuhw->dev_state,
863 					     cpumf_ctr_ctl[rc]);
864 			}
865 		}
866 	/* Keep perf_event_open counter sets */
867 	rc = lcctl(cpuhw->dev_state | cpuhw->state);
868 	if (rc)
869 		pr_err("Counter set stop %#llx of /dev/%s failed rc=%i\n",
870 		       cpuhw->state, S390_HWCTR_DEVICE, rc);
871 	if (!cpuhw->dev_state)
872 		cpuhw->flags &= ~PMU_F_IN_USE;
873 	debug_sprintf_event(cf_dbg, 4, "%s rc %d state %#llx dev_state %#llx\n",
874 			    __func__, rc, cpuhw->state, cpuhw->dev_state);
875 }
876 
877 /* Start counter sets on particular CPU */
878 static void cfset_ioctl_on(void *parm)
879 {
880 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
881 	struct cfset_call_on_cpu_parm *p = parm;
882 	int rc;
883 
884 	cpuhw->flags |= PMU_F_IN_USE;
885 	ctr_set_enable(&cpuhw->dev_state, p->sets);
886 	ctr_set_start(&cpuhw->dev_state, p->sets);
887 	for (rc = CPUMF_CTR_SET_BASIC; rc < CPUMF_CTR_SET_MAX; ++rc)
888 		if ((p->sets & cpumf_ctr_ctl[rc]))
889 			atomic_inc(&cpuhw->ctr_set[rc]);
890 	rc = lcctl(cpuhw->dev_state | cpuhw->state);	/* Start counter sets */
891 	if (!rc)
892 		atomic_inc(&p->cpus_ack);
893 	else
894 		pr_err("Counter set start %#llx of /dev/%s failed rc=%i\n",
895 		       cpuhw->dev_state | cpuhw->state, S390_HWCTR_DEVICE, rc);
896 	debug_sprintf_event(cf_dbg, 4, "%s rc %d state %#llx dev_state %#llx\n",
897 			    __func__, rc, cpuhw->state, cpuhw->dev_state);
898 }
899 
900 static void cfset_release_cpu(void *p)
901 {
902 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
903 	int rc;
904 
905 	debug_sprintf_event(cf_dbg, 4, "%s state %#llx dev_state %#llx\n",
906 			    __func__, cpuhw->state, cpuhw->dev_state);
907 	cpuhw->dev_state = 0;
908 	rc = lcctl(cpuhw->state);	/* Keep perf_event_open counter sets */
909 	if (rc)
910 		pr_err("Counter set release %#llx of /dev/%s failed rc=%i\n",
911 		       cpuhw->state, S390_HWCTR_DEVICE, rc);
912 }
913 
914 /* This modifies the process CPU mask to adopt it to the currently online
915  * CPUs. Offline CPUs can not be addresses. This call terminates the access
916  * and is usually followed by close() or a new iotcl(..., START, ...) which
917  * creates a new request structure.
918  */
919 static void cfset_all_stop(struct cfset_request *req)
920 {
921 	struct cfset_call_on_cpu_parm p = {
922 		.sets = req->ctrset,
923 	};
924 
925 	cpumask_and(&req->mask, &req->mask, cpu_online_mask);
926 	on_each_cpu_mask(&req->mask, cfset_ioctl_off, &p, 1);
927 }
928 
929 /* Release function is also called when application gets terminated without
930  * doing a proper ioctl(..., S390_HWCTR_STOP, ...) command.
931  */
932 static int cfset_release(struct inode *inode, struct file *file)
933 {
934 	mutex_lock(&cfset_ctrset_mutex);
935 	/* Open followed by close/exit has no private_data */
936 	if (file->private_data) {
937 		cfset_all_stop(file->private_data);
938 		cfset_session_del(file->private_data);
939 		kfree(file->private_data);
940 		file->private_data = NULL;
941 	}
942 	if (!atomic_dec_return(&cfset_opencnt))
943 		on_each_cpu(cfset_release_cpu, NULL, 1);
944 	mutex_unlock(&cfset_ctrset_mutex);
945 
946 	hw_perf_event_destroy(NULL);
947 	return 0;
948 }
949 
950 static int cfset_open(struct inode *inode, struct file *file)
951 {
952 	if (!capable(CAP_SYS_ADMIN))
953 		return -EPERM;
954 	mutex_lock(&cfset_ctrset_mutex);
955 	if (atomic_inc_return(&cfset_opencnt) == 1)
956 		cfset_session_init();
957 	mutex_unlock(&cfset_ctrset_mutex);
958 
959 	cpumf_hw_inuse();
960 	file->private_data = NULL;
961 	/* nonseekable_open() never fails */
962 	return nonseekable_open(inode, file);
963 }
964 
965 static int cfset_all_start(struct cfset_request *req)
966 {
967 	struct cfset_call_on_cpu_parm p = {
968 		.sets = req->ctrset,
969 		.cpus_ack = ATOMIC_INIT(0),
970 	};
971 	cpumask_var_t mask;
972 	int rc = 0;
973 
974 	if (!alloc_cpumask_var(&mask, GFP_KERNEL))
975 		return -ENOMEM;
976 	cpumask_and(mask, &req->mask, cpu_online_mask);
977 	on_each_cpu_mask(mask, cfset_ioctl_on, &p, 1);
978 	if (atomic_read(&p.cpus_ack) != cpumask_weight(mask)) {
979 		on_each_cpu_mask(mask, cfset_ioctl_off, &p, 1);
980 		rc = -EIO;
981 		debug_sprintf_event(cf_dbg, 4, "%s CPUs missing", __func__);
982 	}
983 	free_cpumask_var(mask);
984 	return rc;
985 }
986 
987 
988 /* Return the maximum required space for all possible CPUs in case one
989  * CPU will be onlined during the START, READ, STOP cycles.
990  * To find out the size of the counter sets, any one CPU will do. They
991  * all have the same counter sets.
992  */
993 static size_t cfset_needspace(unsigned int sets)
994 {
995 	struct cpu_cf_events *cpuhw = get_cpu_ptr(&cpu_cf_events);
996 	size_t bytes = 0;
997 	int i;
998 
999 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
1000 		if (!(sets & cpumf_ctr_ctl[i]))
1001 			continue;
1002 		bytes += cpum_cf_ctrset_size(i, &cpuhw->info) * sizeof(u64) +
1003 			 sizeof(((struct s390_ctrset_setdata *)0)->set) +
1004 			 sizeof(((struct s390_ctrset_setdata *)0)->no_cnts);
1005 	}
1006 	bytes = sizeof(((struct s390_ctrset_read *)0)->no_cpus) + nr_cpu_ids *
1007 		(bytes + sizeof(((struct s390_ctrset_cpudata *)0)->cpu_nr) +
1008 		     sizeof(((struct s390_ctrset_cpudata *)0)->no_sets));
1009 	put_cpu_ptr(&cpu_cf_events);
1010 	return bytes;
1011 }
1012 
1013 static int cfset_all_copy(unsigned long arg, cpumask_t *mask)
1014 {
1015 	struct s390_ctrset_read __user *ctrset_read;
1016 	unsigned int cpu, cpus, rc;
1017 	void __user *uptr;
1018 
1019 	ctrset_read = (struct s390_ctrset_read __user *)arg;
1020 	uptr = ctrset_read->data;
1021 	for_each_cpu(cpu, mask) {
1022 		struct cpu_cf_events *cpuhw = per_cpu_ptr(&cpu_cf_events, cpu);
1023 		struct s390_ctrset_cpudata __user *ctrset_cpudata;
1024 
1025 		ctrset_cpudata = uptr;
1026 		rc  = put_user(cpu, &ctrset_cpudata->cpu_nr);
1027 		rc |= put_user(cpuhw->sets, &ctrset_cpudata->no_sets);
1028 		rc |= copy_to_user(ctrset_cpudata->data, cpuhw->data,
1029 				   cpuhw->used);
1030 		if (rc)
1031 			return -EFAULT;
1032 		uptr += sizeof(struct s390_ctrset_cpudata) + cpuhw->used;
1033 		cond_resched();
1034 	}
1035 	cpus = cpumask_weight(mask);
1036 	if (put_user(cpus, &ctrset_read->no_cpus))
1037 		return -EFAULT;
1038 	debug_sprintf_event(cf_dbg, 4, "%s copied %ld\n", __func__,
1039 			    uptr - (void __user *)ctrset_read->data);
1040 	return 0;
1041 }
1042 
1043 static size_t cfset_cpuset_read(struct s390_ctrset_setdata *p, int ctrset,
1044 				int ctrset_size, size_t room)
1045 {
1046 	size_t need = 0;
1047 	int rc = -1;
1048 
1049 	need = sizeof(*p) + sizeof(u64) * ctrset_size;
1050 	if (need <= room) {
1051 		p->set = cpumf_ctr_ctl[ctrset];
1052 		p->no_cnts = ctrset_size;
1053 		rc = ctr_stcctm(ctrset, ctrset_size, (u64 *)p->cv);
1054 		if (rc == 3)		/* Nothing stored */
1055 			need = 0;
1056 	}
1057 	return need;
1058 }
1059 
1060 /* Read all counter sets. */
1061 static void cfset_cpu_read(void *parm)
1062 {
1063 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
1064 	struct cfset_call_on_cpu_parm *p = parm;
1065 	int set, set_size;
1066 	size_t space;
1067 
1068 	/* No data saved yet */
1069 	cpuhw->used = 0;
1070 	cpuhw->sets = 0;
1071 	memset(cpuhw->data, 0, sizeof(cpuhw->data));
1072 
1073 	/* Scan the counter sets */
1074 	for (set = CPUMF_CTR_SET_BASIC; set < CPUMF_CTR_SET_MAX; ++set) {
1075 		struct s390_ctrset_setdata *sp = (void *)cpuhw->data +
1076 						 cpuhw->used;
1077 
1078 		if (!(p->sets & cpumf_ctr_ctl[set]))
1079 			continue;	/* Counter set not in list */
1080 		set_size = cpum_cf_ctrset_size(set, &cpuhw->info);
1081 		space = sizeof(cpuhw->data) - cpuhw->used;
1082 		space = cfset_cpuset_read(sp, set, set_size, space);
1083 		if (space) {
1084 			cpuhw->used += space;
1085 			cpuhw->sets += 1;
1086 		}
1087 	}
1088 	debug_sprintf_event(cf_dbg, 4, "%s sets %d used %zd\n", __func__,
1089 			    cpuhw->sets, cpuhw->used);
1090 }
1091 
1092 static int cfset_all_read(unsigned long arg, struct cfset_request *req)
1093 {
1094 	struct cfset_call_on_cpu_parm p;
1095 	cpumask_var_t mask;
1096 	int rc;
1097 
1098 	if (!alloc_cpumask_var(&mask, GFP_KERNEL))
1099 		return -ENOMEM;
1100 
1101 	p.sets = req->ctrset;
1102 	cpumask_and(mask, &req->mask, cpu_online_mask);
1103 	on_each_cpu_mask(mask, cfset_cpu_read, &p, 1);
1104 	rc = cfset_all_copy(arg, mask);
1105 	free_cpumask_var(mask);
1106 	return rc;
1107 }
1108 
1109 static long cfset_ioctl_read(unsigned long arg, struct cfset_request *req)
1110 {
1111 	struct s390_ctrset_read read;
1112 	int ret = -ENODATA;
1113 
1114 	if (req && req->ctrset) {
1115 		if (copy_from_user(&read, (char __user *)arg, sizeof(read)))
1116 			return -EFAULT;
1117 		ret = cfset_all_read(arg, req);
1118 	}
1119 	return ret;
1120 }
1121 
1122 static long cfset_ioctl_stop(struct file *file)
1123 {
1124 	struct cfset_request *req = file->private_data;
1125 	int ret = -ENXIO;
1126 
1127 	if (req) {
1128 		cfset_all_stop(req);
1129 		cfset_session_del(req);
1130 		kfree(req);
1131 		file->private_data = NULL;
1132 		ret = 0;
1133 	}
1134 	return ret;
1135 }
1136 
1137 static long cfset_ioctl_start(unsigned long arg, struct file *file)
1138 {
1139 	struct s390_ctrset_start __user *ustart;
1140 	struct s390_ctrset_start start;
1141 	struct cfset_request *preq;
1142 	void __user *umask;
1143 	unsigned int len;
1144 	int ret = 0;
1145 	size_t need;
1146 
1147 	if (file->private_data)
1148 		return -EBUSY;
1149 	ustart = (struct s390_ctrset_start __user *)arg;
1150 	if (copy_from_user(&start, ustart, sizeof(start)))
1151 		return -EFAULT;
1152 	if (start.version != S390_HWCTR_START_VERSION)
1153 		return -EINVAL;
1154 	if (start.counter_sets & ~(cpumf_ctr_ctl[CPUMF_CTR_SET_BASIC] |
1155 				   cpumf_ctr_ctl[CPUMF_CTR_SET_USER] |
1156 				   cpumf_ctr_ctl[CPUMF_CTR_SET_CRYPTO] |
1157 				   cpumf_ctr_ctl[CPUMF_CTR_SET_EXT] |
1158 				   cpumf_ctr_ctl[CPUMF_CTR_SET_MT_DIAG]))
1159 		return -EINVAL;		/* Invalid counter set */
1160 	if (!start.counter_sets)
1161 		return -EINVAL;		/* No counter set at all? */
1162 
1163 	preq = kzalloc(sizeof(*preq), GFP_KERNEL);
1164 	if (!preq)
1165 		return -ENOMEM;
1166 	cpumask_clear(&preq->mask);
1167 	len = min_t(u64, start.cpumask_len, cpumask_size());
1168 	umask = (void __user *)start.cpumask;
1169 	if (copy_from_user(&preq->mask, umask, len)) {
1170 		kfree(preq);
1171 		return -EFAULT;
1172 	}
1173 	if (cpumask_empty(&preq->mask)) {
1174 		kfree(preq);
1175 		return -EINVAL;
1176 	}
1177 	need = cfset_needspace(start.counter_sets);
1178 	if (put_user(need, &ustart->data_bytes)) {
1179 		kfree(preq);
1180 		return -EFAULT;
1181 	}
1182 	preq->ctrset = start.counter_sets;
1183 	ret = cfset_all_start(preq);
1184 	if (!ret) {
1185 		cfset_session_add(preq);
1186 		file->private_data = preq;
1187 		debug_sprintf_event(cf_dbg, 4, "%s set %#lx need %ld ret %d\n",
1188 				    __func__, preq->ctrset, need, ret);
1189 	} else {
1190 		kfree(preq);
1191 	}
1192 	return ret;
1193 }
1194 
1195 /* Entry point to the /dev/hwctr device interface.
1196  * The ioctl system call supports three subcommands:
1197  * S390_HWCTR_START: Start the specified counter sets on a CPU list. The
1198  *    counter set keeps running until explicitly stopped. Returns the number
1199  *    of bytes needed to store the counter values. If another S390_HWCTR_START
1200  *    ioctl subcommand is called without a previous S390_HWCTR_STOP stop
1201  *    command on the same file descriptor, -EBUSY is returned.
1202  * S390_HWCTR_READ: Read the counter set values from specified CPU list given
1203  *    with the S390_HWCTR_START command.
1204  * S390_HWCTR_STOP: Stops the counter sets on the CPU list given with the
1205  *    previous S390_HWCTR_START subcommand.
1206  */
1207 static long cfset_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
1208 {
1209 	int ret;
1210 
1211 	cpus_read_lock();
1212 	mutex_lock(&cfset_ctrset_mutex);
1213 	switch (cmd) {
1214 	case S390_HWCTR_START:
1215 		ret = cfset_ioctl_start(arg, file);
1216 		break;
1217 	case S390_HWCTR_STOP:
1218 		ret = cfset_ioctl_stop(file);
1219 		break;
1220 	case S390_HWCTR_READ:
1221 		ret = cfset_ioctl_read(arg, file->private_data);
1222 		break;
1223 	default:
1224 		ret = -ENOTTY;
1225 		break;
1226 	}
1227 	mutex_unlock(&cfset_ctrset_mutex);
1228 	cpus_read_unlock();
1229 	return ret;
1230 }
1231 
1232 static const struct file_operations cfset_fops = {
1233 	.owner = THIS_MODULE,
1234 	.open = cfset_open,
1235 	.release = cfset_release,
1236 	.unlocked_ioctl	= cfset_ioctl,
1237 	.compat_ioctl = cfset_ioctl,
1238 	.llseek = no_llseek
1239 };
1240 
1241 static struct miscdevice cfset_dev = {
1242 	.name	= S390_HWCTR_DEVICE,
1243 	.minor	= MISC_DYNAMIC_MINOR,
1244 	.fops	= &cfset_fops,
1245 };
1246 
1247 /* Hotplug add of a CPU. Scan through all active processes and add
1248  * that CPU to the list of CPUs supplied with ioctl(..., START, ...).
1249  */
1250 int cfset_online_cpu(unsigned int cpu)
1251 {
1252 	struct cfset_call_on_cpu_parm p;
1253 	struct cfset_request *rp;
1254 
1255 	mutex_lock(&cfset_ctrset_mutex);
1256 	if (!list_empty(&cfset_session.head)) {
1257 		list_for_each_entry(rp, &cfset_session.head, node) {
1258 			p.sets = rp->ctrset;
1259 			cfset_ioctl_on(&p);
1260 			cpumask_set_cpu(cpu, &rp->mask);
1261 		}
1262 	}
1263 	mutex_unlock(&cfset_ctrset_mutex);
1264 	return 0;
1265 }
1266 
1267 /* Hotplug remove of a CPU. Scan through all active processes and clear
1268  * that CPU from the list of CPUs supplied with ioctl(..., START, ...).
1269  */
1270 int cfset_offline_cpu(unsigned int cpu)
1271 {
1272 	struct cfset_call_on_cpu_parm p;
1273 	struct cfset_request *rp;
1274 
1275 	mutex_lock(&cfset_ctrset_mutex);
1276 	if (!list_empty(&cfset_session.head)) {
1277 		list_for_each_entry(rp, &cfset_session.head, node) {
1278 			p.sets = rp->ctrset;
1279 			cfset_ioctl_off(&p);
1280 			cpumask_clear_cpu(cpu, &rp->mask);
1281 		}
1282 	}
1283 	mutex_unlock(&cfset_ctrset_mutex);
1284 	return 0;
1285 }
1286 
1287 static void cfdiag_read(struct perf_event *event)
1288 {
1289 	debug_sprintf_event(cf_dbg, 3, "%s event %#llx count %ld\n", __func__,
1290 			    event->attr.config, local64_read(&event->count));
1291 }
1292 
1293 static int get_authctrsets(void)
1294 {
1295 	struct cpu_cf_events *cpuhw;
1296 	unsigned long auth = 0;
1297 	enum cpumf_ctr_set i;
1298 
1299 	cpuhw = &get_cpu_var(cpu_cf_events);
1300 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
1301 		if (cpuhw->info.auth_ctl & cpumf_ctr_ctl[i])
1302 			auth |= cpumf_ctr_ctl[i];
1303 	}
1304 	put_cpu_var(cpu_cf_events);
1305 	return auth;
1306 }
1307 
1308 /* Setup the event. Test for authorized counter sets and only include counter
1309  * sets which are authorized at the time of the setup. Including unauthorized
1310  * counter sets result in specification exception (and panic).
1311  */
1312 static int cfdiag_event_init2(struct perf_event *event)
1313 {
1314 	struct perf_event_attr *attr = &event->attr;
1315 	int err = 0;
1316 
1317 	/* Set sample_period to indicate sampling */
1318 	event->hw.config = attr->config;
1319 	event->hw.sample_period = attr->sample_period;
1320 	local64_set(&event->hw.period_left, event->hw.sample_period);
1321 	local64_set(&event->count, 0);
1322 	event->hw.last_period = event->hw.sample_period;
1323 
1324 	/* Add all authorized counter sets to config_base. The
1325 	 * the hardware init function is either called per-cpu or just once
1326 	 * for all CPUS (event->cpu == -1).  This depends on the whether
1327 	 * counting is started for all CPUs or on a per workload base where
1328 	 * the perf event moves from one CPU to another CPU.
1329 	 * Checking the authorization on any CPU is fine as the hardware
1330 	 * applies the same authorization settings to all CPUs.
1331 	 */
1332 	event->hw.config_base = get_authctrsets();
1333 
1334 	/* No authorized counter sets, nothing to count/sample */
1335 	if (!event->hw.config_base)
1336 		err = -EINVAL;
1337 
1338 	debug_sprintf_event(cf_dbg, 5, "%s err %d config_base %#lx\n",
1339 			    __func__, err, event->hw.config_base);
1340 	return err;
1341 }
1342 
1343 static int cfdiag_event_init(struct perf_event *event)
1344 {
1345 	struct perf_event_attr *attr = &event->attr;
1346 	int err = -ENOENT;
1347 
1348 	if (event->attr.config != PERF_EVENT_CPUM_CF_DIAG ||
1349 	    event->attr.type != event->pmu->type)
1350 		goto out;
1351 
1352 	/* Raw events are used to access counters directly,
1353 	 * hence do not permit excludes.
1354 	 * This event is useless without PERF_SAMPLE_RAW to return counter set
1355 	 * values as raw data.
1356 	 */
1357 	if (attr->exclude_kernel || attr->exclude_user || attr->exclude_hv ||
1358 	    !(attr->sample_type & (PERF_SAMPLE_CPU | PERF_SAMPLE_RAW))) {
1359 		err = -EOPNOTSUPP;
1360 		goto out;
1361 	}
1362 
1363 	/* Initialize for using the CPU-measurement counter facility */
1364 	cpumf_hw_inuse();
1365 	event->destroy = hw_perf_event_destroy;
1366 
1367 	err = cfdiag_event_init2(event);
1368 	if (unlikely(err))
1369 		event->destroy(event);
1370 out:
1371 	return err;
1372 }
1373 
1374 /* Create cf_diag/events/CF_DIAG event sysfs file. This counter is used
1375  * to collect the complete counter sets for a scheduled process. Target
1376  * are complete counter sets attached as raw data to the artificial event.
1377  * This results in complete counter sets available when a process is
1378  * scheduled. Contains the delta of every counter while the process was
1379  * running.
1380  */
1381 CPUMF_EVENT_ATTR(CF_DIAG, CF_DIAG, PERF_EVENT_CPUM_CF_DIAG);
1382 
1383 static struct attribute *cfdiag_events_attr[] = {
1384 	CPUMF_EVENT_PTR(CF_DIAG, CF_DIAG),
1385 	NULL,
1386 };
1387 
1388 PMU_FORMAT_ATTR(event, "config:0-63");
1389 
1390 static struct attribute *cfdiag_format_attr[] = {
1391 	&format_attr_event.attr,
1392 	NULL,
1393 };
1394 
1395 static struct attribute_group cfdiag_events_group = {
1396 	.name = "events",
1397 	.attrs = cfdiag_events_attr,
1398 };
1399 static struct attribute_group cfdiag_format_group = {
1400 	.name = "format",
1401 	.attrs = cfdiag_format_attr,
1402 };
1403 static const struct attribute_group *cfdiag_attr_groups[] = {
1404 	&cfdiag_events_group,
1405 	&cfdiag_format_group,
1406 	NULL,
1407 };
1408 
1409 /* Performance monitoring unit for event CF_DIAG. Since this event
1410  * is also started and stopped via the perf_event_open() system call, use
1411  * the same event enable/disable call back functions. They do not
1412  * have a pointer to the perf_event strcture as first parameter.
1413  *
1414  * The functions XXX_add, XXX_del, XXX_start and XXX_stop are also common.
1415  * Reuse them and distinguish the event (always first parameter) via
1416  * 'config' member.
1417  */
1418 static struct pmu cf_diag = {
1419 	.task_ctx_nr  = perf_sw_context,
1420 	.event_init   = cfdiag_event_init,
1421 	.pmu_enable   = cpumf_pmu_enable,
1422 	.pmu_disable  = cpumf_pmu_disable,
1423 	.add	      = cpumf_pmu_add,
1424 	.del	      = cpumf_pmu_del,
1425 	.start	      = cpumf_pmu_start,
1426 	.stop	      = cpumf_pmu_stop,
1427 	.read	      = cfdiag_read,
1428 
1429 	.attr_groups  = cfdiag_attr_groups
1430 };
1431 
1432 /* Calculate memory needed to store all counter sets together with header and
1433  * trailer data. This is independent of the counter set authorization which
1434  * can vary depending on the configuration.
1435  */
1436 static size_t cfdiag_maxsize(struct cpumf_ctr_info *info)
1437 {
1438 	size_t max_size = sizeof(struct cf_trailer_entry);
1439 	enum cpumf_ctr_set i;
1440 
1441 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
1442 		size_t size = cpum_cf_ctrset_size(i, info);
1443 
1444 		if (size)
1445 			max_size += size * sizeof(u64) +
1446 				    sizeof(struct cf_ctrset_entry);
1447 	}
1448 	return max_size;
1449 }
1450 
1451 /* Get the CPU speed, try sampling facility first and CPU attributes second. */
1452 static void cfdiag_get_cpu_speed(void)
1453 {
1454 	unsigned long mhz;
1455 
1456 	if (cpum_sf_avail()) {			/* Sampling facility first */
1457 		struct hws_qsi_info_block si;
1458 
1459 		memset(&si, 0, sizeof(si));
1460 		if (!qsi(&si)) {
1461 			cfdiag_cpu_speed = si.cpu_speed;
1462 			return;
1463 		}
1464 	}
1465 
1466 	/* Fallback: CPU speed extract static part. Used in case
1467 	 * CPU Measurement Sampling Facility is turned off.
1468 	 */
1469 	mhz = __ecag(ECAG_CPU_ATTRIBUTE, 0);
1470 	if (mhz != -1UL)
1471 		cfdiag_cpu_speed = mhz & 0xffffffff;
1472 }
1473 
1474 static int cfset_init(void)
1475 {
1476 	struct cpumf_ctr_info info;
1477 	size_t need;
1478 	int rc;
1479 
1480 	if (qctri(&info))
1481 		return -ENODEV;
1482 
1483 	cfdiag_get_cpu_speed();
1484 	/* Make sure the counter set data fits into predefined buffer. */
1485 	need = cfdiag_maxsize(&info);
1486 	if (need > sizeof(((struct cpu_cf_events *)0)->start)) {
1487 		pr_err("Insufficient memory for PMU(cpum_cf_diag) need=%zu\n",
1488 		       need);
1489 		return -ENOMEM;
1490 	}
1491 
1492 	rc = misc_register(&cfset_dev);
1493 	if (rc) {
1494 		pr_err("Registration of /dev/%s failed rc=%i\n",
1495 		       cfset_dev.name, rc);
1496 		goto out;
1497 	}
1498 
1499 	rc = perf_pmu_register(&cf_diag, "cpum_cf_diag", -1);
1500 	if (rc) {
1501 		misc_deregister(&cfset_dev);
1502 		pr_err("Registration of PMU(cpum_cf_diag) failed with rc=%i\n",
1503 		       rc);
1504 	}
1505 out:
1506 	return rc;
1507 }
1508 
1509 device_initcall(cpumf_pmu_init);
1510