xref: /openbmc/linux/arch/s390/kernel/perf_cpum_cf.c (revision 726ccdba)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Performance event support for s390x - CPU-measurement Counter Facility
4  *
5  *  Copyright IBM Corp. 2012, 2023
6  *  Author(s): Hendrik Brueckner <brueckner@linux.ibm.com>
7  *	       Thomas Richter <tmricht@linux.ibm.com>
8  */
9 #define KMSG_COMPONENT	"cpum_cf"
10 #define pr_fmt(fmt)	KMSG_COMPONENT ": " fmt
11 
12 #include <linux/kernel.h>
13 #include <linux/kernel_stat.h>
14 #include <linux/percpu.h>
15 #include <linux/notifier.h>
16 #include <linux/init.h>
17 #include <linux/export.h>
18 #include <linux/miscdevice.h>
19 #include <linux/perf_event.h>
20 
21 #include <asm/cpu_mf.h>
22 #include <asm/hwctrset.h>
23 #include <asm/debug.h>
24 
25 enum cpumf_ctr_set {
26 	CPUMF_CTR_SET_BASIC   = 0,    /* Basic Counter Set */
27 	CPUMF_CTR_SET_USER    = 1,    /* Problem-State Counter Set */
28 	CPUMF_CTR_SET_CRYPTO  = 2,    /* Crypto-Activity Counter Set */
29 	CPUMF_CTR_SET_EXT     = 3,    /* Extended Counter Set */
30 	CPUMF_CTR_SET_MT_DIAG = 4,    /* MT-diagnostic Counter Set */
31 
32 	/* Maximum number of counter sets */
33 	CPUMF_CTR_SET_MAX,
34 };
35 
36 #define CPUMF_LCCTL_ENABLE_SHIFT    16
37 #define CPUMF_LCCTL_ACTCTL_SHIFT     0
38 
39 static inline void ctr_set_enable(u64 *state, u64 ctrsets)
40 {
41 	*state |= ctrsets << CPUMF_LCCTL_ENABLE_SHIFT;
42 }
43 
44 static inline void ctr_set_disable(u64 *state, u64 ctrsets)
45 {
46 	*state &= ~(ctrsets << CPUMF_LCCTL_ENABLE_SHIFT);
47 }
48 
49 static inline void ctr_set_start(u64 *state, u64 ctrsets)
50 {
51 	*state |= ctrsets << CPUMF_LCCTL_ACTCTL_SHIFT;
52 }
53 
54 static inline void ctr_set_stop(u64 *state, u64 ctrsets)
55 {
56 	*state &= ~(ctrsets << CPUMF_LCCTL_ACTCTL_SHIFT);
57 }
58 
59 static inline int ctr_stcctm(enum cpumf_ctr_set set, u64 range, u64 *dest)
60 {
61 	switch (set) {
62 	case CPUMF_CTR_SET_BASIC:
63 		return stcctm(BASIC, range, dest);
64 	case CPUMF_CTR_SET_USER:
65 		return stcctm(PROBLEM_STATE, range, dest);
66 	case CPUMF_CTR_SET_CRYPTO:
67 		return stcctm(CRYPTO_ACTIVITY, range, dest);
68 	case CPUMF_CTR_SET_EXT:
69 		return stcctm(EXTENDED, range, dest);
70 	case CPUMF_CTR_SET_MT_DIAG:
71 		return stcctm(MT_DIAG_CLEARING, range, dest);
72 	case CPUMF_CTR_SET_MAX:
73 		return 3;
74 	}
75 	return 3;
76 }
77 
78 struct cpu_cf_events {
79 	atomic_t		ctr_set[CPUMF_CTR_SET_MAX];
80 	u64			state;		/* For perf_event_open SVC */
81 	u64			dev_state;	/* For /dev/hwctr */
82 	unsigned int		flags;
83 	size_t used;			/* Bytes used in data */
84 	size_t usedss;			/* Bytes used in start/stop */
85 	unsigned char start[PAGE_SIZE];	/* Counter set at event add */
86 	unsigned char stop[PAGE_SIZE];	/* Counter set at event delete */
87 	unsigned char data[PAGE_SIZE];	/* Counter set at /dev/hwctr */
88 	unsigned int sets;		/* # Counter set saved in memory */
89 };
90 
91 /* Per-CPU event structure for the counter facility */
92 static DEFINE_PER_CPU(struct cpu_cf_events, cpu_cf_events);
93 
94 static unsigned int cfdiag_cpu_speed;	/* CPU speed for CF_DIAG trailer */
95 static debug_info_t *cf_dbg;
96 
97 /*
98  * The CPU Measurement query counter information instruction contains
99  * information which varies per machine generation, but is constant and
100  * does not change when running on a particular machine, such as counter
101  * first and second version number. This is needed to determine the size
102  * of counter sets. Extract this information at device driver initialization.
103  */
104 static struct cpumf_ctr_info	cpumf_ctr_info;
105 
106 #define	CF_DIAG_CTRSET_DEF		0xfeef	/* Counter set header mark */
107 						/* interval in seconds */
108 
109 /* Counter sets are stored as data stream in a page sized memory buffer and
110  * exported to user space via raw data attached to the event sample data.
111  * Each counter set starts with an eight byte header consisting of:
112  * - a two byte eye catcher (0xfeef)
113  * - a one byte counter set number
114  * - a two byte counter set size (indicates the number of counters in this set)
115  * - a three byte reserved value (must be zero) to make the header the same
116  *   size as a counter value.
117  * All counter values are eight byte in size.
118  *
119  * All counter sets are followed by a 64 byte trailer.
120  * The trailer consists of a:
121  * - flag field indicating valid fields when corresponding bit set
122  * - the counter facility first and second version number
123  * - the CPU speed if nonzero
124  * - the time stamp the counter sets have been collected
125  * - the time of day (TOD) base value
126  * - the machine type.
127  *
128  * The counter sets are saved when the process is prepared to be executed on a
129  * CPU and saved again when the process is going to be removed from a CPU.
130  * The difference of both counter sets are calculated and stored in the event
131  * sample data area.
132  */
133 struct cf_ctrset_entry {	/* CPU-M CF counter set entry (8 byte) */
134 	unsigned int def:16;	/* 0-15  Data Entry Format */
135 	unsigned int set:16;	/* 16-31 Counter set identifier */
136 	unsigned int ctr:16;	/* 32-47 Number of stored counters */
137 	unsigned int res1:16;	/* 48-63 Reserved */
138 };
139 
140 struct cf_trailer_entry {	/* CPU-M CF_DIAG trailer (64 byte) */
141 	/* 0 - 7 */
142 	union {
143 		struct {
144 			unsigned int clock_base:1;	/* TOD clock base set */
145 			unsigned int speed:1;		/* CPU speed set */
146 			/* Measurement alerts */
147 			unsigned int mtda:1;	/* Loss of MT ctr. data alert */
148 			unsigned int caca:1;	/* Counter auth. change alert */
149 			unsigned int lcda:1;	/* Loss of counter data alert */
150 		};
151 		unsigned long flags;	/* 0-63    All indicators */
152 	};
153 	/* 8 - 15 */
154 	unsigned int cfvn:16;			/* 64-79   Ctr First Version */
155 	unsigned int csvn:16;			/* 80-95   Ctr Second Version */
156 	unsigned int cpu_speed:32;		/* 96-127  CPU speed */
157 	/* 16 - 23 */
158 	unsigned long timestamp;		/* 128-191 Timestamp (TOD) */
159 	/* 24 - 55 */
160 	union {
161 		struct {
162 			unsigned long progusage1;
163 			unsigned long progusage2;
164 			unsigned long progusage3;
165 			unsigned long tod_base;
166 		};
167 		unsigned long progusage[4];
168 	};
169 	/* 56 - 63 */
170 	unsigned int mach_type:16;		/* Machine type */
171 	unsigned int res1:16;			/* Reserved */
172 	unsigned int res2:32;			/* Reserved */
173 };
174 
175 /* Create the trailer data at the end of a page. */
176 static void cfdiag_trailer(struct cf_trailer_entry *te)
177 {
178 	struct cpuid cpuid;
179 
180 	te->cfvn = cpumf_ctr_info.cfvn;		/* Counter version numbers */
181 	te->csvn = cpumf_ctr_info.csvn;
182 
183 	get_cpu_id(&cpuid);			/* Machine type */
184 	te->mach_type = cpuid.machine;
185 	te->cpu_speed = cfdiag_cpu_speed;
186 	if (te->cpu_speed)
187 		te->speed = 1;
188 	te->clock_base = 1;			/* Save clock base */
189 	te->tod_base = tod_clock_base.tod;
190 	te->timestamp = get_tod_clock_fast();
191 }
192 
193 /*
194  * The number of counters per counter set varies between machine generations,
195  * but is constant when running on a particular machine generation.
196  * Determine each counter set size at device driver initialization and
197  * retrieve it later.
198  */
199 static size_t cpumf_ctr_setsizes[CPUMF_CTR_SET_MAX];
200 static void cpum_cf_make_setsize(enum cpumf_ctr_set ctrset)
201 {
202 	size_t ctrset_size = 0;
203 
204 	switch (ctrset) {
205 	case CPUMF_CTR_SET_BASIC:
206 		if (cpumf_ctr_info.cfvn >= 1)
207 			ctrset_size = 6;
208 		break;
209 	case CPUMF_CTR_SET_USER:
210 		if (cpumf_ctr_info.cfvn == 1)
211 			ctrset_size = 6;
212 		else if (cpumf_ctr_info.cfvn >= 3)
213 			ctrset_size = 2;
214 		break;
215 	case CPUMF_CTR_SET_CRYPTO:
216 		if (cpumf_ctr_info.csvn >= 1 && cpumf_ctr_info.csvn <= 5)
217 			ctrset_size = 16;
218 		else if (cpumf_ctr_info.csvn == 6 || cpumf_ctr_info.csvn == 7)
219 			ctrset_size = 20;
220 		break;
221 	case CPUMF_CTR_SET_EXT:
222 		if (cpumf_ctr_info.csvn == 1)
223 			ctrset_size = 32;
224 		else if (cpumf_ctr_info.csvn == 2)
225 			ctrset_size = 48;
226 		else if (cpumf_ctr_info.csvn >= 3 && cpumf_ctr_info.csvn <= 5)
227 			ctrset_size = 128;
228 		else if (cpumf_ctr_info.csvn == 6 || cpumf_ctr_info.csvn == 7)
229 			ctrset_size = 160;
230 		break;
231 	case CPUMF_CTR_SET_MT_DIAG:
232 		if (cpumf_ctr_info.csvn > 3)
233 			ctrset_size = 48;
234 		break;
235 	case CPUMF_CTR_SET_MAX:
236 		break;
237 	}
238 	cpumf_ctr_setsizes[ctrset] = ctrset_size;
239 }
240 
241 /*
242  * Return the maximum possible counter set size (in number of 8 byte counters)
243  * depending on type and model number.
244  */
245 static size_t cpum_cf_read_setsize(enum cpumf_ctr_set ctrset)
246 {
247 	return cpumf_ctr_setsizes[ctrset];
248 }
249 
250 /* Read a counter set. The counter set number determines the counter set and
251  * the CPUM-CF first and second version number determine the number of
252  * available counters in each counter set.
253  * Each counter set starts with header containing the counter set number and
254  * the number of eight byte counters.
255  *
256  * The functions returns the number of bytes occupied by this counter set
257  * including the header.
258  * If there is no counter in the counter set, this counter set is useless and
259  * zero is returned on this case.
260  *
261  * Note that the counter sets may not be enabled or active and the stcctm
262  * instruction might return error 3. Depending on error_ok value this is ok,
263  * for example when called from cpumf_pmu_start() call back function.
264  */
265 static size_t cfdiag_getctrset(struct cf_ctrset_entry *ctrdata, int ctrset,
266 			       size_t room, bool error_ok)
267 {
268 	size_t ctrset_size, need = 0;
269 	int rc = 3;				/* Assume write failure */
270 
271 	ctrdata->def = CF_DIAG_CTRSET_DEF;
272 	ctrdata->set = ctrset;
273 	ctrdata->res1 = 0;
274 	ctrset_size = cpum_cf_read_setsize(ctrset);
275 
276 	if (ctrset_size) {			/* Save data */
277 		need = ctrset_size * sizeof(u64) + sizeof(*ctrdata);
278 		if (need <= room) {
279 			rc = ctr_stcctm(ctrset, ctrset_size,
280 					(u64 *)(ctrdata + 1));
281 		}
282 		if (rc != 3 || error_ok)
283 			ctrdata->ctr = ctrset_size;
284 		else
285 			need = 0;
286 	}
287 
288 	return need;
289 }
290 
291 static const u64 cpumf_ctr_ctl[CPUMF_CTR_SET_MAX] = {
292 	[CPUMF_CTR_SET_BASIC]	= 0x02,
293 	[CPUMF_CTR_SET_USER]	= 0x04,
294 	[CPUMF_CTR_SET_CRYPTO]	= 0x08,
295 	[CPUMF_CTR_SET_EXT]	= 0x01,
296 	[CPUMF_CTR_SET_MT_DIAG] = 0x20,
297 };
298 
299 /* Read out all counter sets and save them in the provided data buffer.
300  * The last 64 byte host an artificial trailer entry.
301  */
302 static size_t cfdiag_getctr(void *data, size_t sz, unsigned long auth,
303 			    bool error_ok)
304 {
305 	struct cf_trailer_entry *trailer;
306 	size_t offset = 0, done;
307 	int i;
308 
309 	memset(data, 0, sz);
310 	sz -= sizeof(*trailer);		/* Always room for trailer */
311 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
312 		struct cf_ctrset_entry *ctrdata = data + offset;
313 
314 		if (!(auth & cpumf_ctr_ctl[i]))
315 			continue;	/* Counter set not authorized */
316 
317 		done = cfdiag_getctrset(ctrdata, i, sz - offset, error_ok);
318 		offset += done;
319 	}
320 	trailer = data + offset;
321 	cfdiag_trailer(trailer);
322 	return offset + sizeof(*trailer);
323 }
324 
325 /* Calculate the difference for each counter in a counter set. */
326 static void cfdiag_diffctrset(u64 *pstart, u64 *pstop, int counters)
327 {
328 	for (; --counters >= 0; ++pstart, ++pstop)
329 		if (*pstop >= *pstart)
330 			*pstop -= *pstart;
331 		else
332 			*pstop = *pstart - *pstop + 1;
333 }
334 
335 /* Scan the counter sets and calculate the difference of each counter
336  * in each set. The result is the increment of each counter during the
337  * period the counter set has been activated.
338  *
339  * Return true on success.
340  */
341 static int cfdiag_diffctr(struct cpu_cf_events *cpuhw, unsigned long auth)
342 {
343 	struct cf_trailer_entry *trailer_start, *trailer_stop;
344 	struct cf_ctrset_entry *ctrstart, *ctrstop;
345 	size_t offset = 0;
346 
347 	auth &= (1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1;
348 	do {
349 		ctrstart = (struct cf_ctrset_entry *)(cpuhw->start + offset);
350 		ctrstop = (struct cf_ctrset_entry *)(cpuhw->stop + offset);
351 
352 		if (memcmp(ctrstop, ctrstart, sizeof(*ctrstop))) {
353 			pr_err_once("cpum_cf_diag counter set compare error "
354 				    "in set %i\n", ctrstart->set);
355 			return 0;
356 		}
357 		auth &= ~cpumf_ctr_ctl[ctrstart->set];
358 		if (ctrstart->def == CF_DIAG_CTRSET_DEF) {
359 			cfdiag_diffctrset((u64 *)(ctrstart + 1),
360 					  (u64 *)(ctrstop + 1), ctrstart->ctr);
361 			offset += ctrstart->ctr * sizeof(u64) +
362 							sizeof(*ctrstart);
363 		}
364 	} while (ctrstart->def && auth);
365 
366 	/* Save time_stamp from start of event in stop's trailer */
367 	trailer_start = (struct cf_trailer_entry *)(cpuhw->start + offset);
368 	trailer_stop = (struct cf_trailer_entry *)(cpuhw->stop + offset);
369 	trailer_stop->progusage[0] = trailer_start->timestamp;
370 
371 	return 1;
372 }
373 
374 static enum cpumf_ctr_set get_counter_set(u64 event)
375 {
376 	int set = CPUMF_CTR_SET_MAX;
377 
378 	if (event < 32)
379 		set = CPUMF_CTR_SET_BASIC;
380 	else if (event < 64)
381 		set = CPUMF_CTR_SET_USER;
382 	else if (event < 128)
383 		set = CPUMF_CTR_SET_CRYPTO;
384 	else if (event < 288)
385 		set = CPUMF_CTR_SET_EXT;
386 	else if (event >= 448 && event < 496)
387 		set = CPUMF_CTR_SET_MT_DIAG;
388 
389 	return set;
390 }
391 
392 static int validate_ctr_version(const u64 config, enum cpumf_ctr_set set)
393 {
394 	u16 mtdiag_ctl;
395 	int err = 0;
396 
397 	/* check required version for counter sets */
398 	switch (set) {
399 	case CPUMF_CTR_SET_BASIC:
400 	case CPUMF_CTR_SET_USER:
401 		if (cpumf_ctr_info.cfvn < 1)
402 			err = -EOPNOTSUPP;
403 		break;
404 	case CPUMF_CTR_SET_CRYPTO:
405 		if ((cpumf_ctr_info.csvn >= 1 && cpumf_ctr_info.csvn <= 5 &&
406 		     config > 79) || (cpumf_ctr_info.csvn >= 6 && config > 83))
407 			err = -EOPNOTSUPP;
408 		break;
409 	case CPUMF_CTR_SET_EXT:
410 		if (cpumf_ctr_info.csvn < 1)
411 			err = -EOPNOTSUPP;
412 		if ((cpumf_ctr_info.csvn == 1 && config > 159) ||
413 		    (cpumf_ctr_info.csvn == 2 && config > 175) ||
414 		    (cpumf_ctr_info.csvn >= 3 && cpumf_ctr_info.csvn <= 5 &&
415 		     config > 255) ||
416 		    (cpumf_ctr_info.csvn >= 6 && config > 287))
417 			err = -EOPNOTSUPP;
418 		break;
419 	case CPUMF_CTR_SET_MT_DIAG:
420 		if (cpumf_ctr_info.csvn <= 3)
421 			err = -EOPNOTSUPP;
422 		/*
423 		 * MT-diagnostic counters are read-only.  The counter set
424 		 * is automatically enabled and activated on all CPUs with
425 		 * multithreading (SMT).  Deactivation of multithreading
426 		 * also disables the counter set.  State changes are ignored
427 		 * by lcctl().	Because Linux controls SMT enablement through
428 		 * a kernel parameter only, the counter set is either disabled
429 		 * or enabled and active.
430 		 *
431 		 * Thus, the counters can only be used if SMT is on and the
432 		 * counter set is enabled and active.
433 		 */
434 		mtdiag_ctl = cpumf_ctr_ctl[CPUMF_CTR_SET_MT_DIAG];
435 		if (!((cpumf_ctr_info.auth_ctl & mtdiag_ctl) &&
436 		      (cpumf_ctr_info.enable_ctl & mtdiag_ctl) &&
437 		      (cpumf_ctr_info.act_ctl & mtdiag_ctl)))
438 			err = -EOPNOTSUPP;
439 		break;
440 	case CPUMF_CTR_SET_MAX:
441 		err = -EOPNOTSUPP;
442 	}
443 
444 	return err;
445 }
446 
447 /*
448  * Change the CPUMF state to active.
449  * Enable and activate the CPU-counter sets according
450  * to the per-cpu control state.
451  */
452 static void cpumf_pmu_enable(struct pmu *pmu)
453 {
454 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
455 	int err;
456 
457 	if (cpuhw->flags & PMU_F_ENABLED)
458 		return;
459 
460 	err = lcctl(cpuhw->state | cpuhw->dev_state);
461 	if (err)
462 		pr_err("Enabling the performance measuring unit failed with rc=%x\n", err);
463 	else
464 		cpuhw->flags |= PMU_F_ENABLED;
465 }
466 
467 /*
468  * Change the CPUMF state to inactive.
469  * Disable and enable (inactive) the CPU-counter sets according
470  * to the per-cpu control state.
471  */
472 static void cpumf_pmu_disable(struct pmu *pmu)
473 {
474 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
475 	int err;
476 	u64 inactive;
477 
478 	if (!(cpuhw->flags & PMU_F_ENABLED))
479 		return;
480 
481 	inactive = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1);
482 	inactive |= cpuhw->dev_state;
483 	err = lcctl(inactive);
484 	if (err)
485 		pr_err("Disabling the performance measuring unit failed with rc=%x\n", err);
486 	else
487 		cpuhw->flags &= ~PMU_F_ENABLED;
488 }
489 
490 #define PMC_INIT      0UL
491 #define PMC_RELEASE   1UL
492 
493 static void cpum_cf_setup_cpu(void *flags)
494 {
495 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
496 
497 	switch ((unsigned long)flags) {
498 	case PMC_INIT:
499 		cpuhw->flags |= PMU_F_RESERVED;
500 		break;
501 
502 	case PMC_RELEASE:
503 		cpuhw->flags &= ~PMU_F_RESERVED;
504 		break;
505 	}
506 
507 	/* Disable CPU counter sets */
508 	lcctl(0);
509 	debug_sprintf_event(cf_dbg, 5, "%s flags %#x flags %#x state %#llx\n",
510 			    __func__, *(int *)flags, cpuhw->flags,
511 			    cpuhw->state);
512 }
513 
514 /* Initialize the CPU-measurement counter facility */
515 static int __kernel_cpumcf_begin(void)
516 {
517 	on_each_cpu(cpum_cf_setup_cpu, (void *)PMC_INIT, 1);
518 	irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT);
519 
520 	return 0;
521 }
522 
523 /* Release the CPU-measurement counter facility */
524 static void __kernel_cpumcf_end(void)
525 {
526 	on_each_cpu(cpum_cf_setup_cpu, (void *)PMC_RELEASE, 1);
527 	irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT);
528 }
529 
530 /* Number of perf events counting hardware events */
531 static atomic_t num_events = ATOMIC_INIT(0);
532 /* Used to avoid races in calling reserve/release_cpumf_hardware */
533 static DEFINE_MUTEX(pmc_reserve_mutex);
534 
535 /* Release the PMU if event is the last perf event */
536 static void hw_perf_event_destroy(struct perf_event *event)
537 {
538 	mutex_lock(&pmc_reserve_mutex);
539 	if (atomic_dec_return(&num_events) == 0)
540 		__kernel_cpumcf_end();
541 	mutex_unlock(&pmc_reserve_mutex);
542 }
543 
544 /* CPUMF <-> perf event mappings for kernel+userspace (basic set) */
545 static const int cpumf_generic_events_basic[] = {
546 	[PERF_COUNT_HW_CPU_CYCLES]	    = 0,
547 	[PERF_COUNT_HW_INSTRUCTIONS]	    = 1,
548 	[PERF_COUNT_HW_CACHE_REFERENCES]    = -1,
549 	[PERF_COUNT_HW_CACHE_MISSES]	    = -1,
550 	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1,
551 	[PERF_COUNT_HW_BRANCH_MISSES]	    = -1,
552 	[PERF_COUNT_HW_BUS_CYCLES]	    = -1,
553 };
554 /* CPUMF <-> perf event mappings for userspace (problem-state set) */
555 static const int cpumf_generic_events_user[] = {
556 	[PERF_COUNT_HW_CPU_CYCLES]	    = 32,
557 	[PERF_COUNT_HW_INSTRUCTIONS]	    = 33,
558 	[PERF_COUNT_HW_CACHE_REFERENCES]    = -1,
559 	[PERF_COUNT_HW_CACHE_MISSES]	    = -1,
560 	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1,
561 	[PERF_COUNT_HW_BRANCH_MISSES]	    = -1,
562 	[PERF_COUNT_HW_BUS_CYCLES]	    = -1,
563 };
564 
565 static void cpumf_hw_inuse(void)
566 {
567 	mutex_lock(&pmc_reserve_mutex);
568 	if (atomic_inc_return(&num_events) == 1)
569 		__kernel_cpumcf_begin();
570 	mutex_unlock(&pmc_reserve_mutex);
571 }
572 
573 static int is_userspace_event(u64 ev)
574 {
575 	return cpumf_generic_events_user[PERF_COUNT_HW_CPU_CYCLES] == ev ||
576 	       cpumf_generic_events_user[PERF_COUNT_HW_INSTRUCTIONS] == ev;
577 }
578 
579 static int __hw_perf_event_init(struct perf_event *event, unsigned int type)
580 {
581 	struct perf_event_attr *attr = &event->attr;
582 	struct hw_perf_event *hwc = &event->hw;
583 	enum cpumf_ctr_set set;
584 	u64 ev;
585 
586 	switch (type) {
587 	case PERF_TYPE_RAW:
588 		/* Raw events are used to access counters directly,
589 		 * hence do not permit excludes */
590 		if (attr->exclude_kernel || attr->exclude_user ||
591 		    attr->exclude_hv)
592 			return -EOPNOTSUPP;
593 		ev = attr->config;
594 		break;
595 
596 	case PERF_TYPE_HARDWARE:
597 		if (is_sampling_event(event))	/* No sampling support */
598 			return -ENOENT;
599 		ev = attr->config;
600 		if (!attr->exclude_user && attr->exclude_kernel) {
601 			/*
602 			 * Count user space (problem-state) only
603 			 * Handle events 32 and 33 as 0:u and 1:u
604 			 */
605 			if (!is_userspace_event(ev)) {
606 				if (ev >= ARRAY_SIZE(cpumf_generic_events_user))
607 					return -EOPNOTSUPP;
608 				ev = cpumf_generic_events_user[ev];
609 			}
610 		} else if (!attr->exclude_kernel && attr->exclude_user) {
611 			/* No support for kernel space counters only */
612 			return -EOPNOTSUPP;
613 		} else {
614 			/* Count user and kernel space, incl. events 32 + 33 */
615 			if (!is_userspace_event(ev)) {
616 				if (ev >= ARRAY_SIZE(cpumf_generic_events_basic))
617 					return -EOPNOTSUPP;
618 				ev = cpumf_generic_events_basic[ev];
619 			}
620 		}
621 		break;
622 
623 	default:
624 		return -ENOENT;
625 	}
626 
627 	if (ev == -1)
628 		return -ENOENT;
629 
630 	if (ev > PERF_CPUM_CF_MAX_CTR)
631 		return -ENOENT;
632 
633 	/* Obtain the counter set to which the specified counter belongs */
634 	set = get_counter_set(ev);
635 	switch (set) {
636 	case CPUMF_CTR_SET_BASIC:
637 	case CPUMF_CTR_SET_USER:
638 	case CPUMF_CTR_SET_CRYPTO:
639 	case CPUMF_CTR_SET_EXT:
640 	case CPUMF_CTR_SET_MT_DIAG:
641 		/*
642 		 * Use the hardware perf event structure to store the
643 		 * counter number in the 'config' member and the counter
644 		 * set number in the 'config_base' as bit mask.
645 		 * It is later used to enable/disable the counter(s).
646 		 */
647 		hwc->config = ev;
648 		hwc->config_base = cpumf_ctr_ctl[set];
649 		break;
650 	case CPUMF_CTR_SET_MAX:
651 		/* The counter could not be associated to a counter set */
652 		return -EINVAL;
653 	}
654 
655 	/* Initialize for using the CPU-measurement counter facility */
656 	cpumf_hw_inuse();
657 	event->destroy = hw_perf_event_destroy;
658 
659 	/*
660 	 * Finally, validate version and authorization of the counter set.
661 	 * If the particular CPU counter set is not authorized,
662 	 * return with -ENOENT in order to fall back to other
663 	 * PMUs that might suffice the event request.
664 	 */
665 	if (!(hwc->config_base & cpumf_ctr_info.auth_ctl))
666 		return -ENOENT;
667 	return validate_ctr_version(hwc->config, set);
668 }
669 
670 /* Events CPU_CYLCES and INSTRUCTIONS can be submitted with two different
671  * attribute::type values:
672  * - PERF_TYPE_HARDWARE:
673  * - pmu->type:
674  * Handle both type of invocations identical. They address the same hardware.
675  * The result is different when event modifiers exclude_kernel and/or
676  * exclude_user are also set.
677  */
678 static int cpumf_pmu_event_type(struct perf_event *event)
679 {
680 	u64 ev = event->attr.config;
681 
682 	if (cpumf_generic_events_basic[PERF_COUNT_HW_CPU_CYCLES] == ev ||
683 	    cpumf_generic_events_basic[PERF_COUNT_HW_INSTRUCTIONS] == ev ||
684 	    cpumf_generic_events_user[PERF_COUNT_HW_CPU_CYCLES] == ev ||
685 	    cpumf_generic_events_user[PERF_COUNT_HW_INSTRUCTIONS] == ev)
686 		return PERF_TYPE_HARDWARE;
687 	return PERF_TYPE_RAW;
688 }
689 
690 static int cpumf_pmu_event_init(struct perf_event *event)
691 {
692 	unsigned int type = event->attr.type;
693 	int err;
694 
695 	if (type == PERF_TYPE_HARDWARE || type == PERF_TYPE_RAW)
696 		err = __hw_perf_event_init(event, type);
697 	else if (event->pmu->type == type)
698 		/* Registered as unknown PMU */
699 		err = __hw_perf_event_init(event, cpumf_pmu_event_type(event));
700 	else
701 		return -ENOENT;
702 
703 	if (unlikely(err) && event->destroy)
704 		event->destroy(event);
705 
706 	return err;
707 }
708 
709 static int hw_perf_event_reset(struct perf_event *event)
710 {
711 	u64 prev, new;
712 	int err;
713 
714 	do {
715 		prev = local64_read(&event->hw.prev_count);
716 		err = ecctr(event->hw.config, &new);
717 		if (err) {
718 			if (err != 3)
719 				break;
720 			/* The counter is not (yet) available. This
721 			 * might happen if the counter set to which
722 			 * this counter belongs is in the disabled
723 			 * state.
724 			 */
725 			new = 0;
726 		}
727 	} while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
728 
729 	return err;
730 }
731 
732 static void hw_perf_event_update(struct perf_event *event)
733 {
734 	u64 prev, new, delta;
735 	int err;
736 
737 	do {
738 		prev = local64_read(&event->hw.prev_count);
739 		err = ecctr(event->hw.config, &new);
740 		if (err)
741 			return;
742 	} while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
743 
744 	delta = (prev <= new) ? new - prev
745 			      : (-1ULL - prev) + new + 1;	 /* overflow */
746 	local64_add(delta, &event->count);
747 }
748 
749 static void cpumf_pmu_read(struct perf_event *event)
750 {
751 	if (event->hw.state & PERF_HES_STOPPED)
752 		return;
753 
754 	hw_perf_event_update(event);
755 }
756 
757 static void cpumf_pmu_start(struct perf_event *event, int flags)
758 {
759 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
760 	struct hw_perf_event *hwc = &event->hw;
761 	int i;
762 
763 	if (!(hwc->state & PERF_HES_STOPPED))
764 		return;
765 
766 	hwc->state = 0;
767 
768 	/* (Re-)enable and activate the counter set */
769 	ctr_set_enable(&cpuhw->state, hwc->config_base);
770 	ctr_set_start(&cpuhw->state, hwc->config_base);
771 
772 	/* The counter set to which this counter belongs can be already active.
773 	 * Because all counters in a set are active, the event->hw.prev_count
774 	 * needs to be synchronized.  At this point, the counter set can be in
775 	 * the inactive or disabled state.
776 	 */
777 	if (hwc->config == PERF_EVENT_CPUM_CF_DIAG) {
778 		cpuhw->usedss = cfdiag_getctr(cpuhw->start,
779 					      sizeof(cpuhw->start),
780 					      hwc->config_base, true);
781 	} else {
782 		hw_perf_event_reset(event);
783 	}
784 
785 	/* Increment refcount for counter sets */
786 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i)
787 		if ((hwc->config_base & cpumf_ctr_ctl[i]))
788 			atomic_inc(&cpuhw->ctr_set[i]);
789 }
790 
791 /* Create perf event sample with the counter sets as raw data.	The sample
792  * is then pushed to the event subsystem and the function checks for
793  * possible event overflows. If an event overflow occurs, the PMU is
794  * stopped.
795  *
796  * Return non-zero if an event overflow occurred.
797  */
798 static int cfdiag_push_sample(struct perf_event *event,
799 			      struct cpu_cf_events *cpuhw)
800 {
801 	struct perf_sample_data data;
802 	struct perf_raw_record raw;
803 	struct pt_regs regs;
804 	int overflow;
805 
806 	/* Setup perf sample */
807 	perf_sample_data_init(&data, 0, event->hw.last_period);
808 	memset(&regs, 0, sizeof(regs));
809 	memset(&raw, 0, sizeof(raw));
810 
811 	if (event->attr.sample_type & PERF_SAMPLE_CPU)
812 		data.cpu_entry.cpu = event->cpu;
813 	if (event->attr.sample_type & PERF_SAMPLE_RAW) {
814 		raw.frag.size = cpuhw->usedss;
815 		raw.frag.data = cpuhw->stop;
816 		perf_sample_save_raw_data(&data, &raw);
817 	}
818 
819 	overflow = perf_event_overflow(event, &data, &regs);
820 	debug_sprintf_event(cf_dbg, 3,
821 			    "%s event %#llx sample_type %#llx raw %d ov %d\n",
822 			    __func__, event->hw.config,
823 			    event->attr.sample_type, raw.size, overflow);
824 	if (overflow)
825 		event->pmu->stop(event, 0);
826 
827 	perf_event_update_userpage(event);
828 	return overflow;
829 }
830 
831 static void cpumf_pmu_stop(struct perf_event *event, int flags)
832 {
833 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
834 	struct hw_perf_event *hwc = &event->hw;
835 	int i;
836 
837 	if (!(hwc->state & PERF_HES_STOPPED)) {
838 		/* Decrement reference count for this counter set and if this
839 		 * is the last used counter in the set, clear activation
840 		 * control and set the counter set state to inactive.
841 		 */
842 		for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
843 			if (!(hwc->config_base & cpumf_ctr_ctl[i]))
844 				continue;
845 			if (!atomic_dec_return(&cpuhw->ctr_set[i]))
846 				ctr_set_stop(&cpuhw->state, cpumf_ctr_ctl[i]);
847 		}
848 		hwc->state |= PERF_HES_STOPPED;
849 	}
850 
851 	if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
852 		if (hwc->config == PERF_EVENT_CPUM_CF_DIAG) {
853 			local64_inc(&event->count);
854 			cpuhw->usedss = cfdiag_getctr(cpuhw->stop,
855 						      sizeof(cpuhw->stop),
856 						      event->hw.config_base,
857 						      false);
858 			if (cfdiag_diffctr(cpuhw, event->hw.config_base))
859 				cfdiag_push_sample(event, cpuhw);
860 		} else if (cpuhw->flags & PMU_F_RESERVED) {
861 			/* Only update when PMU not hotplugged off */
862 			hw_perf_event_update(event);
863 		}
864 		hwc->state |= PERF_HES_UPTODATE;
865 	}
866 }
867 
868 static int cpumf_pmu_add(struct perf_event *event, int flags)
869 {
870 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
871 
872 	ctr_set_enable(&cpuhw->state, event->hw.config_base);
873 	event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
874 
875 	if (flags & PERF_EF_START)
876 		cpumf_pmu_start(event, PERF_EF_RELOAD);
877 
878 	return 0;
879 }
880 
881 static void cpumf_pmu_del(struct perf_event *event, int flags)
882 {
883 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
884 	int i;
885 
886 	cpumf_pmu_stop(event, PERF_EF_UPDATE);
887 
888 	/* Check if any counter in the counter set is still used.  If not used,
889 	 * change the counter set to the disabled state.  This also clears the
890 	 * content of all counters in the set.
891 	 *
892 	 * When a new perf event has been added but not yet started, this can
893 	 * clear enable control and resets all counters in a set.  Therefore,
894 	 * cpumf_pmu_start() always has to reenable a counter set.
895 	 */
896 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i)
897 		if (!atomic_read(&cpuhw->ctr_set[i]))
898 			ctr_set_disable(&cpuhw->state, cpumf_ctr_ctl[i]);
899 }
900 
901 /* Performance monitoring unit for s390x */
902 static struct pmu cpumf_pmu = {
903 	.task_ctx_nr  = perf_sw_context,
904 	.capabilities = PERF_PMU_CAP_NO_INTERRUPT,
905 	.pmu_enable   = cpumf_pmu_enable,
906 	.pmu_disable  = cpumf_pmu_disable,
907 	.event_init   = cpumf_pmu_event_init,
908 	.add	      = cpumf_pmu_add,
909 	.del	      = cpumf_pmu_del,
910 	.start	      = cpumf_pmu_start,
911 	.stop	      = cpumf_pmu_stop,
912 	.read	      = cpumf_pmu_read,
913 };
914 
915 static int cpum_cf_setup(unsigned int cpu, unsigned long flags)
916 {
917 	local_irq_disable();
918 	cpum_cf_setup_cpu((void *)flags);
919 	local_irq_enable();
920 	return 0;
921 }
922 
923 static int cfset_online_cpu(unsigned int cpu);
924 static int cpum_cf_online_cpu(unsigned int cpu)
925 {
926 	debug_sprintf_event(cf_dbg, 4, "%s cpu %d in_irq %ld\n", __func__,
927 			    cpu, in_interrupt());
928 	cpum_cf_setup(cpu, PMC_INIT);
929 	return cfset_online_cpu(cpu);
930 }
931 
932 static int cfset_offline_cpu(unsigned int cpu);
933 static int cpum_cf_offline_cpu(unsigned int cpu)
934 {
935 	debug_sprintf_event(cf_dbg, 4, "%s cpu %d\n", __func__, cpu);
936 	cfset_offline_cpu(cpu);
937 	return cpum_cf_setup(cpu, PMC_RELEASE);
938 }
939 
940 /* Return true if store counter set multiple instruction is available */
941 static inline int stccm_avail(void)
942 {
943 	return test_facility(142);
944 }
945 
946 /* CPU-measurement alerts for the counter facility */
947 static void cpumf_measurement_alert(struct ext_code ext_code,
948 				    unsigned int alert, unsigned long unused)
949 {
950 	struct cpu_cf_events *cpuhw;
951 
952 	if (!(alert & CPU_MF_INT_CF_MASK))
953 		return;
954 
955 	inc_irq_stat(IRQEXT_CMC);
956 	cpuhw = this_cpu_ptr(&cpu_cf_events);
957 
958 	/*
959 	 * Measurement alerts are shared and might happen when the PMU
960 	 * is not reserved.  Ignore these alerts in this case.
961 	 */
962 	if (!(cpuhw->flags & PMU_F_RESERVED))
963 		return;
964 
965 	/* counter authorization change alert */
966 	if (alert & CPU_MF_INT_CF_CACA)
967 		qctri(&cpumf_ctr_info);
968 
969 	/* loss of counter data alert */
970 	if (alert & CPU_MF_INT_CF_LCDA)
971 		pr_err("CPU[%i] Counter data was lost\n", smp_processor_id());
972 
973 	/* loss of MT counter data alert */
974 	if (alert & CPU_MF_INT_CF_MTDA)
975 		pr_warn("CPU[%i] MT counter data was lost\n",
976 			smp_processor_id());
977 }
978 
979 static int cfset_init(void);
980 static int __init cpumf_pmu_init(void)
981 {
982 	int rc;
983 
984 	/* Extract counter measurement facility information */
985 	if (!cpum_cf_avail() || qctri(&cpumf_ctr_info))
986 		return -ENODEV;
987 
988 	/* Determine and store counter set sizes for later reference */
989 	for (rc = CPUMF_CTR_SET_BASIC; rc < CPUMF_CTR_SET_MAX; ++rc)
990 		cpum_cf_make_setsize(rc);
991 
992 	/*
993 	 * Clear bit 15 of cr0 to unauthorize problem-state to
994 	 * extract measurement counters
995 	 */
996 	ctl_clear_bit(0, 48);
997 
998 	/* register handler for measurement-alert interruptions */
999 	rc = register_external_irq(EXT_IRQ_MEASURE_ALERT,
1000 				   cpumf_measurement_alert);
1001 	if (rc) {
1002 		pr_err("Registering for CPU-measurement alerts failed with rc=%i\n", rc);
1003 		return rc;
1004 	}
1005 
1006 	/* Setup s390dbf facility */
1007 	cf_dbg = debug_register(KMSG_COMPONENT, 2, 1, 128);
1008 	if (!cf_dbg) {
1009 		pr_err("Registration of s390dbf(cpum_cf) failed\n");
1010 		rc = -ENOMEM;
1011 		goto out1;
1012 	}
1013 	debug_register_view(cf_dbg, &debug_sprintf_view);
1014 
1015 	cpumf_pmu.attr_groups = cpumf_cf_event_group();
1016 	rc = perf_pmu_register(&cpumf_pmu, "cpum_cf", -1);
1017 	if (rc) {
1018 		pr_err("Registering the cpum_cf PMU failed with rc=%i\n", rc);
1019 		goto out2;
1020 	} else if (stccm_avail()) {	/* Setup counter set device */
1021 		cfset_init();
1022 	}
1023 
1024 	rc = cpuhp_setup_state(CPUHP_AP_PERF_S390_CF_ONLINE,
1025 			       "perf/s390/cf:online",
1026 			       cpum_cf_online_cpu, cpum_cf_offline_cpu);
1027 	return rc;
1028 
1029 out2:
1030 	debug_unregister_view(cf_dbg, &debug_sprintf_view);
1031 	debug_unregister(cf_dbg);
1032 out1:
1033 	unregister_external_irq(EXT_IRQ_MEASURE_ALERT, cpumf_measurement_alert);
1034 	return rc;
1035 }
1036 
1037 /* Support for the CPU Measurement Facility counter set extraction using
1038  * device /dev/hwctr. This allows user space programs to extract complete
1039  * counter set via normal file operations.
1040  */
1041 
1042 static atomic_t cfset_opencnt = ATOMIC_INIT(0);		/* Access count */
1043 static DEFINE_MUTEX(cfset_ctrset_mutex);/* Synchronize access to hardware */
1044 struct cfset_call_on_cpu_parm {		/* Parm struct for smp_call_on_cpu */
1045 	unsigned int sets;		/* Counter set bit mask */
1046 	atomic_t cpus_ack;		/* # CPUs successfully executed func */
1047 };
1048 
1049 static struct cfset_session {		/* CPUs and counter set bit mask */
1050 	struct list_head head;		/* Head of list of active processes */
1051 } cfset_session = {
1052 	.head = LIST_HEAD_INIT(cfset_session.head)
1053 };
1054 
1055 struct cfset_request {			/* CPUs and counter set bit mask */
1056 	unsigned long ctrset;		/* Bit mask of counter set to read */
1057 	cpumask_t mask;			/* CPU mask to read from */
1058 	struct list_head node;		/* Chain to cfset_session.head */
1059 };
1060 
1061 static void cfset_session_init(void)
1062 {
1063 	INIT_LIST_HEAD(&cfset_session.head);
1064 }
1065 
1066 /* Remove current request from global bookkeeping. Maintain a counter set bit
1067  * mask on a per CPU basis.
1068  * Done in process context under mutex protection.
1069  */
1070 static void cfset_session_del(struct cfset_request *p)
1071 {
1072 	list_del(&p->node);
1073 }
1074 
1075 /* Add current request to global bookkeeping. Maintain a counter set bit mask
1076  * on a per CPU basis.
1077  * Done in process context under mutex protection.
1078  */
1079 static void cfset_session_add(struct cfset_request *p)
1080 {
1081 	list_add(&p->node, &cfset_session.head);
1082 }
1083 
1084 /* The /dev/hwctr device access uses PMU_F_IN_USE to mark the device access
1085  * path is currently used.
1086  * The cpu_cf_events::dev_state is used to denote counter sets in use by this
1087  * interface. It is always or'ed in. If this interface is not active, its
1088  * value is zero and no additional counter sets will be included.
1089  *
1090  * The cpu_cf_events::state is used by the perf_event_open SVC and remains
1091  * unchanged.
1092  *
1093  * perf_pmu_enable() and perf_pmu_enable() and its call backs
1094  * cpumf_pmu_enable() and  cpumf_pmu_disable() are called by the
1095  * performance measurement subsystem to enable per process
1096  * CPU Measurement counter facility.
1097  * The XXX_enable() and XXX_disable functions are used to turn off
1098  * x86 performance monitoring interrupt (PMI) during scheduling.
1099  * s390 uses these calls to temporarily stop and resume the active CPU
1100  * counters sets during scheduling.
1101  *
1102  * We do allow concurrent access of perf_event_open() SVC and /dev/hwctr
1103  * device access.  The perf_event_open() SVC interface makes a lot of effort
1104  * to only run the counters while the calling process is actively scheduled
1105  * to run.
1106  * When /dev/hwctr interface is also used at the same time, the counter sets
1107  * will keep running, even when the process is scheduled off a CPU.
1108  * However this is not a problem and does not lead to wrong counter values
1109  * for the perf_event_open() SVC. The current counter value will be recorded
1110  * during schedule-in. At schedule-out time the current counter value is
1111  * extracted again and the delta is calculated and added to the event.
1112  */
1113 /* Stop all counter sets via ioctl interface */
1114 static void cfset_ioctl_off(void *parm)
1115 {
1116 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
1117 	struct cfset_call_on_cpu_parm *p = parm;
1118 	int rc;
1119 
1120 	/* Check if any counter set used by /dev/hwc */
1121 	for (rc = CPUMF_CTR_SET_BASIC; rc < CPUMF_CTR_SET_MAX; ++rc)
1122 		if ((p->sets & cpumf_ctr_ctl[rc])) {
1123 			if (!atomic_dec_return(&cpuhw->ctr_set[rc])) {
1124 				ctr_set_disable(&cpuhw->dev_state,
1125 						cpumf_ctr_ctl[rc]);
1126 				ctr_set_stop(&cpuhw->dev_state,
1127 					     cpumf_ctr_ctl[rc]);
1128 			}
1129 		}
1130 	/* Keep perf_event_open counter sets */
1131 	rc = lcctl(cpuhw->dev_state | cpuhw->state);
1132 	if (rc)
1133 		pr_err("Counter set stop %#llx of /dev/%s failed rc=%i\n",
1134 		       cpuhw->state, S390_HWCTR_DEVICE, rc);
1135 	if (!cpuhw->dev_state)
1136 		cpuhw->flags &= ~PMU_F_IN_USE;
1137 	debug_sprintf_event(cf_dbg, 4, "%s rc %d state %#llx dev_state %#llx\n",
1138 			    __func__, rc, cpuhw->state, cpuhw->dev_state);
1139 }
1140 
1141 /* Start counter sets on particular CPU */
1142 static void cfset_ioctl_on(void *parm)
1143 {
1144 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
1145 	struct cfset_call_on_cpu_parm *p = parm;
1146 	int rc;
1147 
1148 	cpuhw->flags |= PMU_F_IN_USE;
1149 	ctr_set_enable(&cpuhw->dev_state, p->sets);
1150 	ctr_set_start(&cpuhw->dev_state, p->sets);
1151 	for (rc = CPUMF_CTR_SET_BASIC; rc < CPUMF_CTR_SET_MAX; ++rc)
1152 		if ((p->sets & cpumf_ctr_ctl[rc]))
1153 			atomic_inc(&cpuhw->ctr_set[rc]);
1154 	rc = lcctl(cpuhw->dev_state | cpuhw->state);	/* Start counter sets */
1155 	if (!rc)
1156 		atomic_inc(&p->cpus_ack);
1157 	else
1158 		pr_err("Counter set start %#llx of /dev/%s failed rc=%i\n",
1159 		       cpuhw->dev_state | cpuhw->state, S390_HWCTR_DEVICE, rc);
1160 	debug_sprintf_event(cf_dbg, 4, "%s rc %d state %#llx dev_state %#llx\n",
1161 			    __func__, rc, cpuhw->state, cpuhw->dev_state);
1162 }
1163 
1164 static void cfset_release_cpu(void *p)
1165 {
1166 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
1167 	int rc;
1168 
1169 	debug_sprintf_event(cf_dbg, 4, "%s state %#llx dev_state %#llx\n",
1170 			    __func__, cpuhw->state, cpuhw->dev_state);
1171 	cpuhw->dev_state = 0;
1172 	rc = lcctl(cpuhw->state);	/* Keep perf_event_open counter sets */
1173 	if (rc)
1174 		pr_err("Counter set release %#llx of /dev/%s failed rc=%i\n",
1175 		       cpuhw->state, S390_HWCTR_DEVICE, rc);
1176 }
1177 
1178 /* This modifies the process CPU mask to adopt it to the currently online
1179  * CPUs. Offline CPUs can not be addresses. This call terminates the access
1180  * and is usually followed by close() or a new iotcl(..., START, ...) which
1181  * creates a new request structure.
1182  */
1183 static void cfset_all_stop(struct cfset_request *req)
1184 {
1185 	struct cfset_call_on_cpu_parm p = {
1186 		.sets = req->ctrset,
1187 	};
1188 
1189 	cpumask_and(&req->mask, &req->mask, cpu_online_mask);
1190 	on_each_cpu_mask(&req->mask, cfset_ioctl_off, &p, 1);
1191 }
1192 
1193 /* Release function is also called when application gets terminated without
1194  * doing a proper ioctl(..., S390_HWCTR_STOP, ...) command.
1195  */
1196 static int cfset_release(struct inode *inode, struct file *file)
1197 {
1198 	mutex_lock(&cfset_ctrset_mutex);
1199 	/* Open followed by close/exit has no private_data */
1200 	if (file->private_data) {
1201 		cfset_all_stop(file->private_data);
1202 		cfset_session_del(file->private_data);
1203 		kfree(file->private_data);
1204 		file->private_data = NULL;
1205 	}
1206 	if (!atomic_dec_return(&cfset_opencnt))
1207 		on_each_cpu(cfset_release_cpu, NULL, 1);
1208 	mutex_unlock(&cfset_ctrset_mutex);
1209 
1210 	hw_perf_event_destroy(NULL);
1211 	return 0;
1212 }
1213 
1214 static int cfset_open(struct inode *inode, struct file *file)
1215 {
1216 	if (!capable(CAP_SYS_ADMIN))
1217 		return -EPERM;
1218 	mutex_lock(&cfset_ctrset_mutex);
1219 	if (atomic_inc_return(&cfset_opencnt) == 1)
1220 		cfset_session_init();
1221 	mutex_unlock(&cfset_ctrset_mutex);
1222 
1223 	cpumf_hw_inuse();
1224 	file->private_data = NULL;
1225 	/* nonseekable_open() never fails */
1226 	return nonseekable_open(inode, file);
1227 }
1228 
1229 static int cfset_all_start(struct cfset_request *req)
1230 {
1231 	struct cfset_call_on_cpu_parm p = {
1232 		.sets = req->ctrset,
1233 		.cpus_ack = ATOMIC_INIT(0),
1234 	};
1235 	cpumask_var_t mask;
1236 	int rc = 0;
1237 
1238 	if (!alloc_cpumask_var(&mask, GFP_KERNEL))
1239 		return -ENOMEM;
1240 	cpumask_and(mask, &req->mask, cpu_online_mask);
1241 	on_each_cpu_mask(mask, cfset_ioctl_on, &p, 1);
1242 	if (atomic_read(&p.cpus_ack) != cpumask_weight(mask)) {
1243 		on_each_cpu_mask(mask, cfset_ioctl_off, &p, 1);
1244 		rc = -EIO;
1245 		debug_sprintf_event(cf_dbg, 4, "%s CPUs missing", __func__);
1246 	}
1247 	free_cpumask_var(mask);
1248 	return rc;
1249 }
1250 
1251 /* Return the maximum required space for all possible CPUs in case one
1252  * CPU will be onlined during the START, READ, STOP cycles.
1253  * To find out the size of the counter sets, any one CPU will do. They
1254  * all have the same counter sets.
1255  */
1256 static size_t cfset_needspace(unsigned int sets)
1257 {
1258 	size_t bytes = 0;
1259 	int i;
1260 
1261 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
1262 		if (!(sets & cpumf_ctr_ctl[i]))
1263 			continue;
1264 		bytes += cpum_cf_read_setsize(i) * sizeof(u64) +
1265 			 sizeof(((struct s390_ctrset_setdata *)0)->set) +
1266 			 sizeof(((struct s390_ctrset_setdata *)0)->no_cnts);
1267 	}
1268 	bytes = sizeof(((struct s390_ctrset_read *)0)->no_cpus) + nr_cpu_ids *
1269 		(bytes + sizeof(((struct s390_ctrset_cpudata *)0)->cpu_nr) +
1270 		     sizeof(((struct s390_ctrset_cpudata *)0)->no_sets));
1271 	return bytes;
1272 }
1273 
1274 static int cfset_all_copy(unsigned long arg, cpumask_t *mask)
1275 {
1276 	struct s390_ctrset_read __user *ctrset_read;
1277 	unsigned int cpu, cpus, rc = 0;
1278 	void __user *uptr;
1279 
1280 	ctrset_read = (struct s390_ctrset_read __user *)arg;
1281 	uptr = ctrset_read->data;
1282 	for_each_cpu(cpu, mask) {
1283 		struct cpu_cf_events *cpuhw = per_cpu_ptr(&cpu_cf_events, cpu);
1284 		struct s390_ctrset_cpudata __user *ctrset_cpudata;
1285 
1286 		ctrset_cpudata = uptr;
1287 		rc  = put_user(cpu, &ctrset_cpudata->cpu_nr);
1288 		rc |= put_user(cpuhw->sets, &ctrset_cpudata->no_sets);
1289 		rc |= copy_to_user(ctrset_cpudata->data, cpuhw->data,
1290 				   cpuhw->used);
1291 		if (rc) {
1292 			rc = -EFAULT;
1293 			goto out;
1294 		}
1295 		uptr += sizeof(struct s390_ctrset_cpudata) + cpuhw->used;
1296 		cond_resched();
1297 	}
1298 	cpus = cpumask_weight(mask);
1299 	if (put_user(cpus, &ctrset_read->no_cpus))
1300 		rc = -EFAULT;
1301 out:
1302 	debug_sprintf_event(cf_dbg, 4, "%s rc %d copied %ld\n", __func__, rc,
1303 			    uptr - (void __user *)ctrset_read->data);
1304 	return rc;
1305 }
1306 
1307 static size_t cfset_cpuset_read(struct s390_ctrset_setdata *p, int ctrset,
1308 				int ctrset_size, size_t room)
1309 {
1310 	size_t need = 0;
1311 	int rc = -1;
1312 
1313 	need = sizeof(*p) + sizeof(u64) * ctrset_size;
1314 	if (need <= room) {
1315 		p->set = cpumf_ctr_ctl[ctrset];
1316 		p->no_cnts = ctrset_size;
1317 		rc = ctr_stcctm(ctrset, ctrset_size, (u64 *)p->cv);
1318 		if (rc == 3)		/* Nothing stored */
1319 			need = 0;
1320 	}
1321 	return need;
1322 }
1323 
1324 /* Read all counter sets. */
1325 static void cfset_cpu_read(void *parm)
1326 {
1327 	struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
1328 	struct cfset_call_on_cpu_parm *p = parm;
1329 	int set, set_size;
1330 	size_t space;
1331 
1332 	/* No data saved yet */
1333 	cpuhw->used = 0;
1334 	cpuhw->sets = 0;
1335 	memset(cpuhw->data, 0, sizeof(cpuhw->data));
1336 
1337 	/* Scan the counter sets */
1338 	for (set = CPUMF_CTR_SET_BASIC; set < CPUMF_CTR_SET_MAX; ++set) {
1339 		struct s390_ctrset_setdata *sp = (void *)cpuhw->data +
1340 						 cpuhw->used;
1341 
1342 		if (!(p->sets & cpumf_ctr_ctl[set]))
1343 			continue;	/* Counter set not in list */
1344 		set_size = cpum_cf_read_setsize(set);
1345 		space = sizeof(cpuhw->data) - cpuhw->used;
1346 		space = cfset_cpuset_read(sp, set, set_size, space);
1347 		if (space) {
1348 			cpuhw->used += space;
1349 			cpuhw->sets += 1;
1350 		}
1351 	}
1352 	debug_sprintf_event(cf_dbg, 4, "%s sets %d used %zd\n", __func__,
1353 			    cpuhw->sets, cpuhw->used);
1354 }
1355 
1356 static int cfset_all_read(unsigned long arg, struct cfset_request *req)
1357 {
1358 	struct cfset_call_on_cpu_parm p;
1359 	cpumask_var_t mask;
1360 	int rc;
1361 
1362 	if (!alloc_cpumask_var(&mask, GFP_KERNEL))
1363 		return -ENOMEM;
1364 
1365 	p.sets = req->ctrset;
1366 	cpumask_and(mask, &req->mask, cpu_online_mask);
1367 	on_each_cpu_mask(mask, cfset_cpu_read, &p, 1);
1368 	rc = cfset_all_copy(arg, mask);
1369 	free_cpumask_var(mask);
1370 	return rc;
1371 }
1372 
1373 static long cfset_ioctl_read(unsigned long arg, struct cfset_request *req)
1374 {
1375 	int ret = -ENODATA;
1376 
1377 	if (req && req->ctrset)
1378 		ret = cfset_all_read(arg, req);
1379 	return ret;
1380 }
1381 
1382 static long cfset_ioctl_stop(struct file *file)
1383 {
1384 	struct cfset_request *req = file->private_data;
1385 	int ret = -ENXIO;
1386 
1387 	if (req) {
1388 		cfset_all_stop(req);
1389 		cfset_session_del(req);
1390 		kfree(req);
1391 		file->private_data = NULL;
1392 		ret = 0;
1393 	}
1394 	return ret;
1395 }
1396 
1397 static long cfset_ioctl_start(unsigned long arg, struct file *file)
1398 {
1399 	struct s390_ctrset_start __user *ustart;
1400 	struct s390_ctrset_start start;
1401 	struct cfset_request *preq;
1402 	void __user *umask;
1403 	unsigned int len;
1404 	int ret = 0;
1405 	size_t need;
1406 
1407 	if (file->private_data)
1408 		return -EBUSY;
1409 	ustart = (struct s390_ctrset_start __user *)arg;
1410 	if (copy_from_user(&start, ustart, sizeof(start)))
1411 		return -EFAULT;
1412 	if (start.version != S390_HWCTR_START_VERSION)
1413 		return -EINVAL;
1414 	if (start.counter_sets & ~(cpumf_ctr_ctl[CPUMF_CTR_SET_BASIC] |
1415 				   cpumf_ctr_ctl[CPUMF_CTR_SET_USER] |
1416 				   cpumf_ctr_ctl[CPUMF_CTR_SET_CRYPTO] |
1417 				   cpumf_ctr_ctl[CPUMF_CTR_SET_EXT] |
1418 				   cpumf_ctr_ctl[CPUMF_CTR_SET_MT_DIAG]))
1419 		return -EINVAL;		/* Invalid counter set */
1420 	if (!start.counter_sets)
1421 		return -EINVAL;		/* No counter set at all? */
1422 
1423 	preq = kzalloc(sizeof(*preq), GFP_KERNEL);
1424 	if (!preq)
1425 		return -ENOMEM;
1426 	cpumask_clear(&preq->mask);
1427 	len = min_t(u64, start.cpumask_len, cpumask_size());
1428 	umask = (void __user *)start.cpumask;
1429 	if (copy_from_user(&preq->mask, umask, len)) {
1430 		kfree(preq);
1431 		return -EFAULT;
1432 	}
1433 	if (cpumask_empty(&preq->mask)) {
1434 		kfree(preq);
1435 		return -EINVAL;
1436 	}
1437 	need = cfset_needspace(start.counter_sets);
1438 	if (put_user(need, &ustart->data_bytes)) {
1439 		kfree(preq);
1440 		return -EFAULT;
1441 	}
1442 	preq->ctrset = start.counter_sets;
1443 	ret = cfset_all_start(preq);
1444 	if (!ret) {
1445 		cfset_session_add(preq);
1446 		file->private_data = preq;
1447 		debug_sprintf_event(cf_dbg, 4, "%s set %#lx need %ld ret %d\n",
1448 				    __func__, preq->ctrset, need, ret);
1449 	} else {
1450 		kfree(preq);
1451 	}
1452 	return ret;
1453 }
1454 
1455 /* Entry point to the /dev/hwctr device interface.
1456  * The ioctl system call supports three subcommands:
1457  * S390_HWCTR_START: Start the specified counter sets on a CPU list. The
1458  *    counter set keeps running until explicitly stopped. Returns the number
1459  *    of bytes needed to store the counter values. If another S390_HWCTR_START
1460  *    ioctl subcommand is called without a previous S390_HWCTR_STOP stop
1461  *    command on the same file descriptor, -EBUSY is returned.
1462  * S390_HWCTR_READ: Read the counter set values from specified CPU list given
1463  *    with the S390_HWCTR_START command.
1464  * S390_HWCTR_STOP: Stops the counter sets on the CPU list given with the
1465  *    previous S390_HWCTR_START subcommand.
1466  */
1467 static long cfset_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
1468 {
1469 	int ret;
1470 
1471 	cpus_read_lock();
1472 	mutex_lock(&cfset_ctrset_mutex);
1473 	switch (cmd) {
1474 	case S390_HWCTR_START:
1475 		ret = cfset_ioctl_start(arg, file);
1476 		break;
1477 	case S390_HWCTR_STOP:
1478 		ret = cfset_ioctl_stop(file);
1479 		break;
1480 	case S390_HWCTR_READ:
1481 		ret = cfset_ioctl_read(arg, file->private_data);
1482 		break;
1483 	default:
1484 		ret = -ENOTTY;
1485 		break;
1486 	}
1487 	mutex_unlock(&cfset_ctrset_mutex);
1488 	cpus_read_unlock();
1489 	return ret;
1490 }
1491 
1492 static const struct file_operations cfset_fops = {
1493 	.owner = THIS_MODULE,
1494 	.open = cfset_open,
1495 	.release = cfset_release,
1496 	.unlocked_ioctl	= cfset_ioctl,
1497 	.compat_ioctl = cfset_ioctl,
1498 	.llseek = no_llseek
1499 };
1500 
1501 static struct miscdevice cfset_dev = {
1502 	.name	= S390_HWCTR_DEVICE,
1503 	.minor	= MISC_DYNAMIC_MINOR,
1504 	.fops	= &cfset_fops,
1505 };
1506 
1507 /* Hotplug add of a CPU. Scan through all active processes and add
1508  * that CPU to the list of CPUs supplied with ioctl(..., START, ...).
1509  */
1510 static int cfset_online_cpu(unsigned int cpu)
1511 {
1512 	struct cfset_call_on_cpu_parm p;
1513 	struct cfset_request *rp;
1514 
1515 	mutex_lock(&cfset_ctrset_mutex);
1516 	if (!list_empty(&cfset_session.head)) {
1517 		list_for_each_entry(rp, &cfset_session.head, node) {
1518 			p.sets = rp->ctrset;
1519 			cfset_ioctl_on(&p);
1520 			cpumask_set_cpu(cpu, &rp->mask);
1521 		}
1522 	}
1523 	mutex_unlock(&cfset_ctrset_mutex);
1524 	return 0;
1525 }
1526 
1527 /* Hotplug remove of a CPU. Scan through all active processes and clear
1528  * that CPU from the list of CPUs supplied with ioctl(..., START, ...).
1529  */
1530 static int cfset_offline_cpu(unsigned int cpu)
1531 {
1532 	struct cfset_call_on_cpu_parm p;
1533 	struct cfset_request *rp;
1534 
1535 	mutex_lock(&cfset_ctrset_mutex);
1536 	if (!list_empty(&cfset_session.head)) {
1537 		list_for_each_entry(rp, &cfset_session.head, node) {
1538 			p.sets = rp->ctrset;
1539 			cfset_ioctl_off(&p);
1540 			cpumask_clear_cpu(cpu, &rp->mask);
1541 		}
1542 	}
1543 	mutex_unlock(&cfset_ctrset_mutex);
1544 	return 0;
1545 }
1546 
1547 static void cfdiag_read(struct perf_event *event)
1548 {
1549 	debug_sprintf_event(cf_dbg, 3, "%s event %#llx count %ld\n", __func__,
1550 			    event->attr.config, local64_read(&event->count));
1551 }
1552 
1553 static int get_authctrsets(void)
1554 {
1555 	unsigned long auth = 0;
1556 	enum cpumf_ctr_set i;
1557 
1558 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
1559 		if (cpumf_ctr_info.auth_ctl & cpumf_ctr_ctl[i])
1560 			auth |= cpumf_ctr_ctl[i];
1561 	}
1562 	return auth;
1563 }
1564 
1565 /* Setup the event. Test for authorized counter sets and only include counter
1566  * sets which are authorized at the time of the setup. Including unauthorized
1567  * counter sets result in specification exception (and panic).
1568  */
1569 static int cfdiag_event_init2(struct perf_event *event)
1570 {
1571 	struct perf_event_attr *attr = &event->attr;
1572 	int err = 0;
1573 
1574 	/* Set sample_period to indicate sampling */
1575 	event->hw.config = attr->config;
1576 	event->hw.sample_period = attr->sample_period;
1577 	local64_set(&event->hw.period_left, event->hw.sample_period);
1578 	local64_set(&event->count, 0);
1579 	event->hw.last_period = event->hw.sample_period;
1580 
1581 	/* Add all authorized counter sets to config_base. The
1582 	 * the hardware init function is either called per-cpu or just once
1583 	 * for all CPUS (event->cpu == -1).  This depends on the whether
1584 	 * counting is started for all CPUs or on a per workload base where
1585 	 * the perf event moves from one CPU to another CPU.
1586 	 * Checking the authorization on any CPU is fine as the hardware
1587 	 * applies the same authorization settings to all CPUs.
1588 	 */
1589 	event->hw.config_base = get_authctrsets();
1590 
1591 	/* No authorized counter sets, nothing to count/sample */
1592 	if (!event->hw.config_base)
1593 		err = -EINVAL;
1594 
1595 	debug_sprintf_event(cf_dbg, 5, "%s err %d config_base %#lx\n",
1596 			    __func__, err, event->hw.config_base);
1597 	return err;
1598 }
1599 
1600 static int cfdiag_event_init(struct perf_event *event)
1601 {
1602 	struct perf_event_attr *attr = &event->attr;
1603 	int err = -ENOENT;
1604 
1605 	if (event->attr.config != PERF_EVENT_CPUM_CF_DIAG ||
1606 	    event->attr.type != event->pmu->type)
1607 		goto out;
1608 
1609 	/* Raw events are used to access counters directly,
1610 	 * hence do not permit excludes.
1611 	 * This event is useless without PERF_SAMPLE_RAW to return counter set
1612 	 * values as raw data.
1613 	 */
1614 	if (attr->exclude_kernel || attr->exclude_user || attr->exclude_hv ||
1615 	    !(attr->sample_type & (PERF_SAMPLE_CPU | PERF_SAMPLE_RAW))) {
1616 		err = -EOPNOTSUPP;
1617 		goto out;
1618 	}
1619 
1620 	/* Initialize for using the CPU-measurement counter facility */
1621 	cpumf_hw_inuse();
1622 	event->destroy = hw_perf_event_destroy;
1623 
1624 	err = cfdiag_event_init2(event);
1625 	if (unlikely(err))
1626 		event->destroy(event);
1627 out:
1628 	return err;
1629 }
1630 
1631 /* Create cf_diag/events/CF_DIAG event sysfs file. This counter is used
1632  * to collect the complete counter sets for a scheduled process. Target
1633  * are complete counter sets attached as raw data to the artificial event.
1634  * This results in complete counter sets available when a process is
1635  * scheduled. Contains the delta of every counter while the process was
1636  * running.
1637  */
1638 CPUMF_EVENT_ATTR(CF_DIAG, CF_DIAG, PERF_EVENT_CPUM_CF_DIAG);
1639 
1640 static struct attribute *cfdiag_events_attr[] = {
1641 	CPUMF_EVENT_PTR(CF_DIAG, CF_DIAG),
1642 	NULL,
1643 };
1644 
1645 PMU_FORMAT_ATTR(event, "config:0-63");
1646 
1647 static struct attribute *cfdiag_format_attr[] = {
1648 	&format_attr_event.attr,
1649 	NULL,
1650 };
1651 
1652 static struct attribute_group cfdiag_events_group = {
1653 	.name = "events",
1654 	.attrs = cfdiag_events_attr,
1655 };
1656 static struct attribute_group cfdiag_format_group = {
1657 	.name = "format",
1658 	.attrs = cfdiag_format_attr,
1659 };
1660 static const struct attribute_group *cfdiag_attr_groups[] = {
1661 	&cfdiag_events_group,
1662 	&cfdiag_format_group,
1663 	NULL,
1664 };
1665 
1666 /* Performance monitoring unit for event CF_DIAG. Since this event
1667  * is also started and stopped via the perf_event_open() system call, use
1668  * the same event enable/disable call back functions. They do not
1669  * have a pointer to the perf_event strcture as first parameter.
1670  *
1671  * The functions XXX_add, XXX_del, XXX_start and XXX_stop are also common.
1672  * Reuse them and distinguish the event (always first parameter) via
1673  * 'config' member.
1674  */
1675 static struct pmu cf_diag = {
1676 	.task_ctx_nr  = perf_sw_context,
1677 	.event_init   = cfdiag_event_init,
1678 	.pmu_enable   = cpumf_pmu_enable,
1679 	.pmu_disable  = cpumf_pmu_disable,
1680 	.add	      = cpumf_pmu_add,
1681 	.del	      = cpumf_pmu_del,
1682 	.start	      = cpumf_pmu_start,
1683 	.stop	      = cpumf_pmu_stop,
1684 	.read	      = cfdiag_read,
1685 
1686 	.attr_groups  = cfdiag_attr_groups
1687 };
1688 
1689 /* Calculate memory needed to store all counter sets together with header and
1690  * trailer data. This is independent of the counter set authorization which
1691  * can vary depending on the configuration.
1692  */
1693 static size_t cfdiag_maxsize(struct cpumf_ctr_info *info)
1694 {
1695 	size_t max_size = sizeof(struct cf_trailer_entry);
1696 	enum cpumf_ctr_set i;
1697 
1698 	for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
1699 		size_t size = cpum_cf_read_setsize(i);
1700 
1701 		if (size)
1702 			max_size += size * sizeof(u64) +
1703 				    sizeof(struct cf_ctrset_entry);
1704 	}
1705 	return max_size;
1706 }
1707 
1708 /* Get the CPU speed, try sampling facility first and CPU attributes second. */
1709 static void cfdiag_get_cpu_speed(void)
1710 {
1711 	unsigned long mhz;
1712 
1713 	if (cpum_sf_avail()) {			/* Sampling facility first */
1714 		struct hws_qsi_info_block si;
1715 
1716 		memset(&si, 0, sizeof(si));
1717 		if (!qsi(&si)) {
1718 			cfdiag_cpu_speed = si.cpu_speed;
1719 			return;
1720 		}
1721 	}
1722 
1723 	/* Fallback: CPU speed extract static part. Used in case
1724 	 * CPU Measurement Sampling Facility is turned off.
1725 	 */
1726 	mhz = __ecag(ECAG_CPU_ATTRIBUTE, 0);
1727 	if (mhz != -1UL)
1728 		cfdiag_cpu_speed = mhz & 0xffffffff;
1729 }
1730 
1731 static int cfset_init(void)
1732 {
1733 	size_t need;
1734 	int rc;
1735 
1736 	cfdiag_get_cpu_speed();
1737 	/* Make sure the counter set data fits into predefined buffer. */
1738 	need = cfdiag_maxsize(&cpumf_ctr_info);
1739 	if (need > sizeof(((struct cpu_cf_events *)0)->start)) {
1740 		pr_err("Insufficient memory for PMU(cpum_cf_diag) need=%zu\n",
1741 		       need);
1742 		return -ENOMEM;
1743 	}
1744 
1745 	rc = misc_register(&cfset_dev);
1746 	if (rc) {
1747 		pr_err("Registration of /dev/%s failed rc=%i\n",
1748 		       cfset_dev.name, rc);
1749 		goto out;
1750 	}
1751 
1752 	rc = perf_pmu_register(&cf_diag, "cpum_cf_diag", -1);
1753 	if (rc) {
1754 		misc_deregister(&cfset_dev);
1755 		pr_err("Registration of PMU(cpum_cf_diag) failed with rc=%i\n",
1756 		       rc);
1757 	}
1758 out:
1759 	return rc;
1760 }
1761 
1762 device_initcall(cpumf_pmu_init);
1763