1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Dynamic function tracer architecture backend. 4 * 5 * Copyright IBM Corp. 2009,2014 6 * 7 * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>, 8 * Martin Schwidefsky <schwidefsky@de.ibm.com> 9 */ 10 11 #include <linux/moduleloader.h> 12 #include <linux/hardirq.h> 13 #include <linux/uaccess.h> 14 #include <linux/ftrace.h> 15 #include <linux/kernel.h> 16 #include <linux/types.h> 17 #include <linux/kprobes.h> 18 #include <trace/syscall.h> 19 #include <asm/asm-offsets.h> 20 #include <asm/cacheflush.h> 21 #include <asm/set_memory.h> 22 #include "entry.h" 23 24 /* 25 * The mcount code looks like this: 26 * stg %r14,8(%r15) # offset 0 27 * larl %r1,<&counter> # offset 6 28 * brasl %r14,_mcount # offset 12 29 * lg %r14,8(%r15) # offset 18 30 * Total length is 24 bytes. Only the first instruction will be patched 31 * by ftrace_make_call / ftrace_make_nop. 32 * The enabled ftrace code block looks like this: 33 * > brasl %r0,ftrace_caller # offset 0 34 * larl %r1,<&counter> # offset 6 35 * brasl %r14,_mcount # offset 12 36 * lg %r14,8(%r15) # offset 18 37 * The ftrace function gets called with a non-standard C function call ABI 38 * where r0 contains the return address. It is also expected that the called 39 * function only clobbers r0 and r1, but restores r2-r15. 40 * For module code we can't directly jump to ftrace caller, but need a 41 * trampoline (ftrace_plt), which clobbers also r1. 42 * The return point of the ftrace function has offset 24, so execution 43 * continues behind the mcount block. 44 * The disabled ftrace code block looks like this: 45 * > jg .+24 # offset 0 46 * larl %r1,<&counter> # offset 6 47 * brasl %r14,_mcount # offset 12 48 * lg %r14,8(%r15) # offset 18 49 * The jg instruction branches to offset 24 to skip as many instructions 50 * as possible. 51 * In case we use gcc's hotpatch feature the original and also the disabled 52 * function prologue contains only a single six byte instruction and looks 53 * like this: 54 * > brcl 0,0 # offset 0 55 * To enable ftrace the code gets patched like above and afterwards looks 56 * like this: 57 * > brasl %r0,ftrace_caller # offset 0 58 */ 59 60 unsigned long ftrace_plt; 61 62 static inline void ftrace_generate_orig_insn(struct ftrace_insn *insn) 63 { 64 #if defined(CC_USING_HOTPATCH) || defined(CC_USING_NOP_MCOUNT) 65 /* brcl 0,0 */ 66 insn->opc = 0xc004; 67 insn->disp = 0; 68 #else 69 /* stg r14,8(r15) */ 70 insn->opc = 0xe3e0; 71 insn->disp = 0xf0080024; 72 #endif 73 } 74 75 static inline int is_kprobe_on_ftrace(struct ftrace_insn *insn) 76 { 77 #ifdef CONFIG_KPROBES 78 if (insn->opc == BREAKPOINT_INSTRUCTION) 79 return 1; 80 #endif 81 return 0; 82 } 83 84 static inline void ftrace_generate_kprobe_nop_insn(struct ftrace_insn *insn) 85 { 86 #ifdef CONFIG_KPROBES 87 insn->opc = BREAKPOINT_INSTRUCTION; 88 insn->disp = KPROBE_ON_FTRACE_NOP; 89 #endif 90 } 91 92 static inline void ftrace_generate_kprobe_call_insn(struct ftrace_insn *insn) 93 { 94 #ifdef CONFIG_KPROBES 95 insn->opc = BREAKPOINT_INSTRUCTION; 96 insn->disp = KPROBE_ON_FTRACE_CALL; 97 #endif 98 } 99 100 int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, 101 unsigned long addr) 102 { 103 return 0; 104 } 105 106 int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, 107 unsigned long addr) 108 { 109 struct ftrace_insn orig, new, old; 110 111 if (probe_kernel_read(&old, (void *) rec->ip, sizeof(old))) 112 return -EFAULT; 113 if (addr == MCOUNT_ADDR) { 114 /* Initial code replacement */ 115 ftrace_generate_orig_insn(&orig); 116 ftrace_generate_nop_insn(&new); 117 } else if (is_kprobe_on_ftrace(&old)) { 118 /* 119 * If we find a breakpoint instruction, a kprobe has been 120 * placed at the beginning of the function. We write the 121 * constant KPROBE_ON_FTRACE_NOP into the remaining four 122 * bytes of the original instruction so that the kprobes 123 * handler can execute a nop, if it reaches this breakpoint. 124 */ 125 ftrace_generate_kprobe_call_insn(&orig); 126 ftrace_generate_kprobe_nop_insn(&new); 127 } else { 128 /* Replace ftrace call with a nop. */ 129 ftrace_generate_call_insn(&orig, rec->ip); 130 ftrace_generate_nop_insn(&new); 131 } 132 /* Verify that the to be replaced code matches what we expect. */ 133 if (memcmp(&orig, &old, sizeof(old))) 134 return -EINVAL; 135 s390_kernel_write((void *) rec->ip, &new, sizeof(new)); 136 return 0; 137 } 138 139 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) 140 { 141 struct ftrace_insn orig, new, old; 142 143 if (probe_kernel_read(&old, (void *) rec->ip, sizeof(old))) 144 return -EFAULT; 145 if (is_kprobe_on_ftrace(&old)) { 146 /* 147 * If we find a breakpoint instruction, a kprobe has been 148 * placed at the beginning of the function. We write the 149 * constant KPROBE_ON_FTRACE_CALL into the remaining four 150 * bytes of the original instruction so that the kprobes 151 * handler can execute a brasl if it reaches this breakpoint. 152 */ 153 ftrace_generate_kprobe_nop_insn(&orig); 154 ftrace_generate_kprobe_call_insn(&new); 155 } else { 156 /* Replace nop with an ftrace call. */ 157 ftrace_generate_nop_insn(&orig); 158 ftrace_generate_call_insn(&new, rec->ip); 159 } 160 /* Verify that the to be replaced code matches what we expect. */ 161 if (memcmp(&orig, &old, sizeof(old))) 162 return -EINVAL; 163 s390_kernel_write((void *) rec->ip, &new, sizeof(new)); 164 return 0; 165 } 166 167 int ftrace_update_ftrace_func(ftrace_func_t func) 168 { 169 return 0; 170 } 171 172 int __init ftrace_dyn_arch_init(void) 173 { 174 return 0; 175 } 176 177 #ifdef CONFIG_MODULES 178 179 static int __init ftrace_plt_init(void) 180 { 181 unsigned int *ip; 182 183 ftrace_plt = (unsigned long) module_alloc(PAGE_SIZE); 184 if (!ftrace_plt) 185 panic("cannot allocate ftrace plt\n"); 186 ip = (unsigned int *) ftrace_plt; 187 ip[0] = 0x0d10e310; /* basr 1,0; lg 1,10(1); br 1 */ 188 ip[1] = 0x100a0004; 189 ip[2] = 0x07f10000; 190 ip[3] = FTRACE_ADDR >> 32; 191 ip[4] = FTRACE_ADDR & 0xffffffff; 192 set_memory_ro(ftrace_plt, 1); 193 return 0; 194 } 195 device_initcall(ftrace_plt_init); 196 197 #endif /* CONFIG_MODULES */ 198 199 #ifdef CONFIG_FUNCTION_GRAPH_TRACER 200 /* 201 * Hook the return address and push it in the stack of return addresses 202 * in current thread info. 203 */ 204 unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip) 205 { 206 struct ftrace_graph_ent trace; 207 208 if (unlikely(ftrace_graph_is_dead())) 209 goto out; 210 if (unlikely(atomic_read(¤t->tracing_graph_pause))) 211 goto out; 212 ip -= MCOUNT_INSN_SIZE; 213 trace.func = ip; 214 trace.depth = current->curr_ret_stack + 1; 215 /* Only trace if the calling function expects to. */ 216 if (!ftrace_graph_entry(&trace)) 217 goto out; 218 if (ftrace_push_return_trace(parent, ip, &trace.depth, 0, 219 NULL) == -EBUSY) 220 goto out; 221 parent = (unsigned long) return_to_handler; 222 out: 223 return parent; 224 } 225 NOKPROBE_SYMBOL(prepare_ftrace_return); 226 227 /* 228 * Patch the kernel code at ftrace_graph_caller location. The instruction 229 * there is branch relative on condition. To enable the ftrace graph code 230 * block, we simply patch the mask field of the instruction to zero and 231 * turn the instruction into a nop. 232 * To disable the ftrace graph code the mask field will be patched to 233 * all ones, which turns the instruction into an unconditional branch. 234 */ 235 int ftrace_enable_ftrace_graph_caller(void) 236 { 237 u8 op = 0x04; /* set mask field to zero */ 238 239 s390_kernel_write(__va(ftrace_graph_caller)+1, &op, sizeof(op)); 240 return 0; 241 } 242 243 int ftrace_disable_ftrace_graph_caller(void) 244 { 245 u8 op = 0xf4; /* set mask field to all ones */ 246 247 s390_kernel_write(__va(ftrace_graph_caller)+1, &op, sizeof(op)); 248 return 0; 249 } 250 251 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ 252