xref: /openbmc/linux/arch/s390/kernel/entry.S (revision e149ca29) 
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 *    S390 low-level entry points.
4 *
5 *    Copyright IBM Corp. 1999, 2012
6 *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
7 *		 Hartmut Penner (hp@de.ibm.com),
8 *		 Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
9 *		 Heiko Carstens <heiko.carstens@de.ibm.com>
10 */
11
12#include <linux/init.h>
13#include <linux/linkage.h>
14#include <asm/alternative-asm.h>
15#include <asm/processor.h>
16#include <asm/cache.h>
17#include <asm/ctl_reg.h>
18#include <asm/dwarf.h>
19#include <asm/errno.h>
20#include <asm/ptrace.h>
21#include <asm/thread_info.h>
22#include <asm/asm-offsets.h>
23#include <asm/unistd.h>
24#include <asm/page.h>
25#include <asm/sigp.h>
26#include <asm/irq.h>
27#include <asm/vx-insn.h>
28#include <asm/setup.h>
29#include <asm/nmi.h>
30#include <asm/export.h>
31#include <asm/nospec-insn.h>
32
33__PT_R0      =	__PT_GPRS
34__PT_R1      =	__PT_GPRS + 8
35__PT_R2      =	__PT_GPRS + 16
36__PT_R3      =	__PT_GPRS + 24
37__PT_R4      =	__PT_GPRS + 32
38__PT_R5      =	__PT_GPRS + 40
39__PT_R6      =	__PT_GPRS + 48
40__PT_R7      =	__PT_GPRS + 56
41__PT_R8      =	__PT_GPRS + 64
42__PT_R9      =	__PT_GPRS + 72
43__PT_R10     =	__PT_GPRS + 80
44__PT_R11     =	__PT_GPRS + 88
45__PT_R12     =	__PT_GPRS + 96
46__PT_R13     =	__PT_GPRS + 104
47__PT_R14     =	__PT_GPRS + 112
48__PT_R15     =	__PT_GPRS + 120
49
50STACK_SHIFT = PAGE_SHIFT + THREAD_SIZE_ORDER
51STACK_SIZE  = 1 << STACK_SHIFT
52STACK_INIT = STACK_SIZE - STACK_FRAME_OVERHEAD - __PT_SIZE
53
54_TIF_WORK	= (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
55		   _TIF_UPROBE | _TIF_GUARDED_STORAGE | _TIF_PATCH_PENDING)
56_TIF_TRACE	= (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \
57		   _TIF_SYSCALL_TRACEPOINT)
58_CIF_WORK	= (_CIF_MCCK_PENDING | _CIF_ASCE_PRIMARY | \
59		   _CIF_ASCE_SECONDARY | _CIF_FPU)
60_PIF_WORK	= (_PIF_PER_TRAP | _PIF_SYSCALL_RESTART)
61
62_LPP_OFFSET	= __LC_LPP
63
64#define BASED(name) name-cleanup_critical(%r13)
65
66	.macro	TRACE_IRQS_ON
67#ifdef CONFIG_TRACE_IRQFLAGS
68	basr	%r2,%r0
69	brasl	%r14,trace_hardirqs_on_caller
70#endif
71	.endm
72
73	.macro	TRACE_IRQS_OFF
74#ifdef CONFIG_TRACE_IRQFLAGS
75	basr	%r2,%r0
76	brasl	%r14,trace_hardirqs_off_caller
77#endif
78	.endm
79
80	.macro	LOCKDEP_SYS_EXIT
81#ifdef CONFIG_LOCKDEP
82	tm	__PT_PSW+1(%r11),0x01	# returning to user ?
83	jz	.+10
84	brasl	%r14,lockdep_sys_exit
85#endif
86	.endm
87
88	.macro	CHECK_STACK savearea
89#ifdef CONFIG_CHECK_STACK
90	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
91	lghi	%r14,\savearea
92	jz	stack_overflow
93#endif
94	.endm
95
96	.macro	CHECK_VMAP_STACK savearea,oklabel
97#ifdef CONFIG_VMAP_STACK
98	lgr	%r14,%r15
99	nill	%r14,0x10000 - STACK_SIZE
100	oill	%r14,STACK_INIT
101	clg	%r14,__LC_KERNEL_STACK
102	je	\oklabel
103	clg	%r14,__LC_ASYNC_STACK
104	je	\oklabel
105	clg	%r14,__LC_NODAT_STACK
106	je	\oklabel
107	clg	%r14,__LC_RESTART_STACK
108	je	\oklabel
109	lghi	%r14,\savearea
110	j	stack_overflow
111#else
112	j	\oklabel
113#endif
114	.endm
115
116	.macro	SWITCH_ASYNC savearea,timer
117	tmhh	%r8,0x0001		# interrupting from user ?
118	jnz	2f
119	lgr	%r14,%r9
120	cghi	%r14,__LC_RETURN_LPSWE
121	je	0f
122	slg	%r14,BASED(.Lcritical_start)
123	clg	%r14,BASED(.Lcritical_length)
124	jhe	1f
1250:
126	lghi	%r11,\savearea		# inside critical section, do cleanup
127	brasl	%r14,cleanup_critical
128	tmhh	%r8,0x0001		# retest problem state after cleanup
129	jnz	2f
1301:	lg	%r14,__LC_ASYNC_STACK	# are we already on the target stack?
131	slgr	%r14,%r15
132	srag	%r14,%r14,STACK_SHIFT
133	jnz	3f
134	CHECK_STACK \savearea
135	aghi	%r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
136	j	4f
1372:	UPDATE_VTIME %r14,%r15,\timer
138	BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
1393:	lg	%r15,__LC_ASYNC_STACK	# load async stack
1404:	la	%r11,STACK_FRAME_OVERHEAD(%r15)
141	.endm
142
143	.macro UPDATE_VTIME w1,w2,enter_timer
144	lg	\w1,__LC_EXIT_TIMER
145	lg	\w2,__LC_LAST_UPDATE_TIMER
146	slg	\w1,\enter_timer
147	slg	\w2,__LC_EXIT_TIMER
148	alg	\w1,__LC_USER_TIMER
149	alg	\w2,__LC_SYSTEM_TIMER
150	stg	\w1,__LC_USER_TIMER
151	stg	\w2,__LC_SYSTEM_TIMER
152	mvc	__LC_LAST_UPDATE_TIMER(8),\enter_timer
153	.endm
154
155	.macro REENABLE_IRQS
156	stg	%r8,__LC_RETURN_PSW
157	ni	__LC_RETURN_PSW,0xbf
158	ssm	__LC_RETURN_PSW
159	.endm
160
161	.macro STCK savearea
162#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
163	.insn	s,0xb27c0000,\savearea		# store clock fast
164#else
165	.insn	s,0xb2050000,\savearea		# store clock
166#endif
167	.endm
168
169	/*
170	 * The TSTMSK macro generates a test-under-mask instruction by
171	 * calculating the memory offset for the specified mask value.
172	 * Mask value can be any constant.  The macro shifts the mask
173	 * value to calculate the memory offset for the test-under-mask
174	 * instruction.
175	 */
176	.macro TSTMSK addr, mask, size=8, bytepos=0
177		.if (\bytepos < \size) && (\mask >> 8)
178			.if (\mask & 0xff)
179				.error "Mask exceeds byte boundary"
180			.endif
181			TSTMSK \addr, "(\mask >> 8)", \size, "(\bytepos + 1)"
182			.exitm
183		.endif
184		.ifeq \mask
185			.error "Mask must not be zero"
186		.endif
187		off = \size - \bytepos - 1
188		tm	off+\addr, \mask
189	.endm
190
191	.macro BPOFF
192	ALTERNATIVE "", ".long 0xb2e8c000", 82
193	.endm
194
195	.macro BPON
196	ALTERNATIVE "", ".long 0xb2e8d000", 82
197	.endm
198
199	.macro BPENTER tif_ptr,tif_mask
200	ALTERNATIVE "TSTMSK \tif_ptr,\tif_mask; jz .+8; .long 0xb2e8d000", \
201		    "", 82
202	.endm
203
204	.macro BPEXIT tif_ptr,tif_mask
205	TSTMSK	\tif_ptr,\tif_mask
206	ALTERNATIVE "jz .+8;  .long 0xb2e8c000", \
207		    "jnz .+8; .long 0xb2e8d000", 82
208	.endm
209
210	GEN_BR_THUNK %r9
211	GEN_BR_THUNK %r14
212	GEN_BR_THUNK %r14,%r11
213
214	.section .kprobes.text, "ax"
215.Ldummy:
216	/*
217	 * This nop exists only in order to avoid that __switch_to starts at
218	 * the beginning of the kprobes text section. In that case we would
219	 * have several symbols at the same address. E.g. objdump would take
220	 * an arbitrary symbol name when disassembling this code.
221	 * With the added nop in between the __switch_to symbol is unique
222	 * again.
223	 */
224	nop	0
225
226ENTRY(__bpon)
227	.globl __bpon
228	BPON
229	BR_EX	%r14
230ENDPROC(__bpon)
231
232/*
233 * Scheduler resume function, called by switch_to
234 *  gpr2 = (task_struct *) prev
235 *  gpr3 = (task_struct *) next
236 * Returns:
237 *  gpr2 = prev
238 */
239ENTRY(__switch_to)
240	stmg	%r6,%r15,__SF_GPRS(%r15)	# store gprs of prev task
241	lghi	%r4,__TASK_stack
242	lghi	%r1,__TASK_thread
243	llill	%r5,STACK_INIT
244	stg	%r15,__THREAD_ksp(%r1,%r2)	# store kernel stack of prev
245	lg	%r15,0(%r4,%r3)			# start of kernel stack of next
246	agr	%r15,%r5			# end of kernel stack of next
247	stg	%r3,__LC_CURRENT		# store task struct of next
248	stg	%r15,__LC_KERNEL_STACK		# store end of kernel stack
249	lg	%r15,__THREAD_ksp(%r1,%r3)	# load kernel stack of next
250	aghi	%r3,__TASK_pid
251	mvc	__LC_CURRENT_PID(4,%r0),0(%r3)	# store pid of next
252	lmg	%r6,%r15,__SF_GPRS(%r15)	# load gprs of next task
253	ALTERNATIVE "", ".insn s,0xb2800000,_LPP_OFFSET", 40
254	BR_EX	%r14
255ENDPROC(__switch_to)
256
257.L__critical_start:
258
259#if IS_ENABLED(CONFIG_KVM)
260/*
261 * sie64a calling convention:
262 * %r2 pointer to sie control block
263 * %r3 guest register save area
264 */
265ENTRY(sie64a)
266	stmg	%r6,%r14,__SF_GPRS(%r15)	# save kernel registers
267	lg	%r12,__LC_CURRENT
268	stg	%r2,__SF_SIE_CONTROL(%r15)	# save control block pointer
269	stg	%r3,__SF_SIE_SAVEAREA(%r15)	# save guest register save area
270	xc	__SF_SIE_REASON(8,%r15),__SF_SIE_REASON(%r15) # reason code = 0
271	mvc	__SF_SIE_FLAGS(8,%r15),__TI_flags(%r12) # copy thread flags
272	TSTMSK	__LC_CPU_FLAGS,_CIF_FPU		# load guest fp/vx registers ?
273	jno	.Lsie_load_guest_gprs
274	brasl	%r14,load_fpu_regs		# load guest fp/vx regs
275.Lsie_load_guest_gprs:
276	lmg	%r0,%r13,0(%r3)			# load guest gprs 0-13
277	lg	%r14,__LC_GMAP			# get gmap pointer
278	ltgr	%r14,%r14
279	jz	.Lsie_gmap
280	lctlg	%c1,%c1,__GMAP_ASCE(%r14)	# load primary asce
281.Lsie_gmap:
282	lg	%r14,__SF_SIE_CONTROL(%r15)	# get control block pointer
283	oi	__SIE_PROG0C+3(%r14),1		# we are going into SIE now
284	tm	__SIE_PROG20+3(%r14),3		# last exit...
285	jnz	.Lsie_skip
286	TSTMSK	__LC_CPU_FLAGS,_CIF_FPU
287	jo	.Lsie_skip			# exit if fp/vx regs changed
288	BPEXIT	__SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
289.Lsie_entry:
290	sie	0(%r14)
291.Lsie_exit:
292	BPOFF
293	BPENTER	__SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
294.Lsie_skip:
295	ni	__SIE_PROG0C+3(%r14),0xfe	# no longer in SIE
296	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
297.Lsie_done:
298# some program checks are suppressing. C code (e.g. do_protection_exception)
299# will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There
300# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable.
301# Other instructions between sie64a and .Lsie_done should not cause program
302# interrupts. So lets use 3 nops as a landing pad for all possible rewinds.
303# See also .Lcleanup_sie
304.Lrewind_pad6:
305	nopr	7
306.Lrewind_pad4:
307	nopr	7
308.Lrewind_pad2:
309	nopr	7
310	.globl sie_exit
311sie_exit:
312	lg	%r14,__SF_SIE_SAVEAREA(%r15)	# load guest register save area
313	stmg	%r0,%r13,0(%r14)		# save guest gprs 0-13
314	xgr	%r0,%r0				# clear guest registers to
315	xgr	%r1,%r1				# prevent speculative use
316	xgr	%r2,%r2
317	xgr	%r3,%r3
318	xgr	%r4,%r4
319	xgr	%r5,%r5
320	lmg	%r6,%r14,__SF_GPRS(%r15)	# restore kernel registers
321	lg	%r2,__SF_SIE_REASON(%r15)	# return exit reason code
322	BR_EX	%r14
323.Lsie_fault:
324	lghi	%r14,-EFAULT
325	stg	%r14,__SF_SIE_REASON(%r15)	# set exit reason code
326	j	sie_exit
327
328	EX_TABLE(.Lrewind_pad6,.Lsie_fault)
329	EX_TABLE(.Lrewind_pad4,.Lsie_fault)
330	EX_TABLE(.Lrewind_pad2,.Lsie_fault)
331	EX_TABLE(sie_exit,.Lsie_fault)
332ENDPROC(sie64a)
333EXPORT_SYMBOL(sie64a)
334EXPORT_SYMBOL(sie_exit)
335#endif
336
337/*
338 * SVC interrupt handler routine. System calls are synchronous events and
339 * are executed with interrupts enabled.
340 */
341
342ENTRY(system_call)
343	stpt	__LC_SYNC_ENTER_TIMER
344.Lsysc_stmg:
345	stmg	%r8,%r15,__LC_SAVE_AREA_SYNC
346	BPOFF
347	lg	%r12,__LC_CURRENT
348	lghi	%r13,__TASK_thread
349	lghi	%r14,_PIF_SYSCALL
350.Lsysc_per:
351	lg	%r15,__LC_KERNEL_STACK
352	la	%r11,STACK_FRAME_OVERHEAD(%r15)	# pointer to pt_regs
353.Lsysc_vtime:
354	UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
355	BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
356	stmg	%r0,%r7,__PT_R0(%r11)
357	mvc	__PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
358	mvc	__PT_PSW(16,%r11),__LC_SVC_OLD_PSW
359	mvc	__PT_INT_CODE(4,%r11),__LC_SVC_ILC
360	stg	%r14,__PT_FLAGS(%r11)
361.Lsysc_do_svc:
362	# clear user controlled register to prevent speculative use
363	xgr	%r0,%r0
364	# load address of system call table
365	lg	%r10,__THREAD_sysc_table(%r13,%r12)
366	llgh	%r8,__PT_INT_CODE+2(%r11)
367	slag	%r8,%r8,3			# shift and test for svc 0
368	jnz	.Lsysc_nr_ok
369	# svc 0: system call number in %r1
370	llgfr	%r1,%r1				# clear high word in r1
371	cghi	%r1,NR_syscalls
372	jnl	.Lsysc_nr_ok
373	sth	%r1,__PT_INT_CODE+2(%r11)
374	slag	%r8,%r1,3
375.Lsysc_nr_ok:
376	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
377	stg	%r2,__PT_ORIG_GPR2(%r11)
378	stg	%r7,STACK_FRAME_OVERHEAD(%r15)
379	lg	%r9,0(%r8,%r10)			# get system call add.
380	TSTMSK	__TI_flags(%r12),_TIF_TRACE
381	jnz	.Lsysc_tracesys
382	BASR_EX	%r14,%r9			# call sys_xxxx
383	stg	%r2,__PT_R2(%r11)		# store return value
384
385.Lsysc_return:
386#ifdef CONFIG_DEBUG_RSEQ
387	lgr	%r2,%r11
388	brasl	%r14,rseq_syscall
389#endif
390	LOCKDEP_SYS_EXIT
391.Lsysc_tif:
392	TSTMSK	__PT_FLAGS(%r11),_PIF_WORK
393	jnz	.Lsysc_work
394	TSTMSK	__TI_flags(%r12),_TIF_WORK
395	jnz	.Lsysc_work			# check for work
396	TSTMSK	__LC_CPU_FLAGS,_CIF_WORK
397	jnz	.Lsysc_work
398	BPEXIT	__TI_flags(%r12),_TIF_ISOLATE_BP
399.Lsysc_restore:
400	lg	%r14,__LC_VDSO_PER_CPU
401	lmg	%r0,%r10,__PT_R0(%r11)
402	mvc	__LC_RETURN_PSW(16),__PT_PSW(%r11)
403.Lsysc_exit_timer:
404	stpt	__LC_EXIT_TIMER
405	mvc	__VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
406	lmg	%r11,%r15,__PT_R11(%r11)
407	b	__LC_RETURN_LPSWE(%r0)
408.Lsysc_done:
409
410#
411# One of the work bits is on. Find out which one.
412#
413.Lsysc_work:
414	TSTMSK	__LC_CPU_FLAGS,_CIF_MCCK_PENDING
415	jo	.Lsysc_mcck_pending
416	TSTMSK	__TI_flags(%r12),_TIF_NEED_RESCHED
417	jo	.Lsysc_reschedule
418	TSTMSK	__PT_FLAGS(%r11),_PIF_SYSCALL_RESTART
419	jo	.Lsysc_syscall_restart
420#ifdef CONFIG_UPROBES
421	TSTMSK	__TI_flags(%r12),_TIF_UPROBE
422	jo	.Lsysc_uprobe_notify
423#endif
424	TSTMSK	__TI_flags(%r12),_TIF_GUARDED_STORAGE
425	jo	.Lsysc_guarded_storage
426	TSTMSK	__PT_FLAGS(%r11),_PIF_PER_TRAP
427	jo	.Lsysc_singlestep
428#ifdef CONFIG_LIVEPATCH
429	TSTMSK	__TI_flags(%r12),_TIF_PATCH_PENDING
430	jo	.Lsysc_patch_pending	# handle live patching just before
431					# signals and possible syscall restart
432#endif
433	TSTMSK	__PT_FLAGS(%r11),_PIF_SYSCALL_RESTART
434	jo	.Lsysc_syscall_restart
435	TSTMSK	__TI_flags(%r12),_TIF_SIGPENDING
436	jo	.Lsysc_sigpending
437	TSTMSK	__TI_flags(%r12),_TIF_NOTIFY_RESUME
438	jo	.Lsysc_notify_resume
439	TSTMSK	__LC_CPU_FLAGS,_CIF_FPU
440	jo	.Lsysc_vxrs
441	TSTMSK	__LC_CPU_FLAGS,(_CIF_ASCE_PRIMARY|_CIF_ASCE_SECONDARY)
442	jnz	.Lsysc_asce
443	j	.Lsysc_return		# beware of critical section cleanup
444
445#
446# _TIF_NEED_RESCHED is set, call schedule
447#
448.Lsysc_reschedule:
449	larl	%r14,.Lsysc_return
450	jg	schedule
451
452#
453# _CIF_MCCK_PENDING is set, call handler
454#
455.Lsysc_mcck_pending:
456	larl	%r14,.Lsysc_return
457	jg	s390_handle_mcck	# TIF bit will be cleared by handler
458
459#
460# _CIF_ASCE_PRIMARY and/or _CIF_ASCE_SECONDARY set, load user space asce
461#
462.Lsysc_asce:
463	ni	__LC_CPU_FLAGS+7,255-_CIF_ASCE_SECONDARY
464	lctlg	%c7,%c7,__LC_VDSO_ASCE		# load secondary asce
465	TSTMSK	__LC_CPU_FLAGS,_CIF_ASCE_PRIMARY
466	jz	.Lsysc_return
467#ifndef CONFIG_HAVE_MARCH_Z10_FEATURES
468	tm	__LC_STFLE_FAC_LIST+3,0x10	# has MVCOS ?
469	jnz	.Lsysc_set_fs_fixup
470	ni	__LC_CPU_FLAGS+7,255-_CIF_ASCE_PRIMARY
471	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
472	j	.Lsysc_return
473.Lsysc_set_fs_fixup:
474#endif
475	larl	%r14,.Lsysc_return
476	jg	set_fs_fixup
477
478#
479# CIF_FPU is set, restore floating-point controls and floating-point registers.
480#
481.Lsysc_vxrs:
482	larl	%r14,.Lsysc_return
483	jg	load_fpu_regs
484
485#
486# _TIF_SIGPENDING is set, call do_signal
487#
488.Lsysc_sigpending:
489	lgr	%r2,%r11		# pass pointer to pt_regs
490	brasl	%r14,do_signal
491	TSTMSK	__PT_FLAGS(%r11),_PIF_SYSCALL
492	jno	.Lsysc_return
493.Lsysc_do_syscall:
494	lghi	%r13,__TASK_thread
495	lmg	%r2,%r7,__PT_R2(%r11)	# load svc arguments
496	lghi	%r1,0			# svc 0 returns -ENOSYS
497	j	.Lsysc_do_svc
498
499#
500# _TIF_NOTIFY_RESUME is set, call do_notify_resume
501#
502.Lsysc_notify_resume:
503	lgr	%r2,%r11		# pass pointer to pt_regs
504	larl	%r14,.Lsysc_return
505	jg	do_notify_resume
506
507#
508# _TIF_UPROBE is set, call uprobe_notify_resume
509#
510#ifdef CONFIG_UPROBES
511.Lsysc_uprobe_notify:
512	lgr	%r2,%r11		# pass pointer to pt_regs
513	larl	%r14,.Lsysc_return
514	jg	uprobe_notify_resume
515#endif
516
517#
518# _TIF_GUARDED_STORAGE is set, call guarded_storage_load
519#
520.Lsysc_guarded_storage:
521	lgr	%r2,%r11		# pass pointer to pt_regs
522	larl	%r14,.Lsysc_return
523	jg	gs_load_bc_cb
524#
525# _TIF_PATCH_PENDING is set, call klp_update_patch_state
526#
527#ifdef CONFIG_LIVEPATCH
528.Lsysc_patch_pending:
529	lg	%r2,__LC_CURRENT	# pass pointer to task struct
530	larl	%r14,.Lsysc_return
531	jg	klp_update_patch_state
532#endif
533
534#
535# _PIF_PER_TRAP is set, call do_per_trap
536#
537.Lsysc_singlestep:
538	ni	__PT_FLAGS+7(%r11),255-_PIF_PER_TRAP
539	lgr	%r2,%r11		# pass pointer to pt_regs
540	larl	%r14,.Lsysc_return
541	jg	do_per_trap
542
543#
544# _PIF_SYSCALL_RESTART is set, repeat the current system call
545#
546.Lsysc_syscall_restart:
547	ni	__PT_FLAGS+7(%r11),255-_PIF_SYSCALL_RESTART
548	lmg	%r1,%r7,__PT_R1(%r11)	# load svc arguments
549	lg	%r2,__PT_ORIG_GPR2(%r11)
550	j	.Lsysc_do_svc
551
552#
553# call tracehook_report_syscall_entry/tracehook_report_syscall_exit before
554# and after the system call
555#
556.Lsysc_tracesys:
557	lgr	%r2,%r11		# pass pointer to pt_regs
558	la	%r3,0
559	llgh	%r0,__PT_INT_CODE+2(%r11)
560	stg	%r0,__PT_R2(%r11)
561	brasl	%r14,do_syscall_trace_enter
562	lghi	%r0,NR_syscalls
563	clgr	%r0,%r2
564	jnh	.Lsysc_tracenogo
565	sllg	%r8,%r2,3
566	lg	%r9,0(%r8,%r10)
567.Lsysc_tracego:
568	lmg	%r3,%r7,__PT_R3(%r11)
569	stg	%r7,STACK_FRAME_OVERHEAD(%r15)
570	lg	%r2,__PT_ORIG_GPR2(%r11)
571	BASR_EX	%r14,%r9		# call sys_xxx
572	stg	%r2,__PT_R2(%r11)	# store return value
573.Lsysc_tracenogo:
574	TSTMSK	__TI_flags(%r12),_TIF_TRACE
575	jz	.Lsysc_return
576	lgr	%r2,%r11		# pass pointer to pt_regs
577	larl	%r14,.Lsysc_return
578	jg	do_syscall_trace_exit
579ENDPROC(system_call)
580
581#
582# a new process exits the kernel with ret_from_fork
583#
584ENTRY(ret_from_fork)
585	la	%r11,STACK_FRAME_OVERHEAD(%r15)
586	lg	%r12,__LC_CURRENT
587	brasl	%r14,schedule_tail
588	TRACE_IRQS_ON
589	ssm	__LC_SVC_NEW_PSW	# reenable interrupts
590	tm	__PT_PSW+1(%r11),0x01	# forking a kernel thread ?
591	jne	.Lsysc_tracenogo
592	# it's a kernel thread
593	lmg	%r9,%r10,__PT_R9(%r11)	# load gprs
594	la	%r2,0(%r10)
595	BASR_EX	%r14,%r9
596	j	.Lsysc_tracenogo
597ENDPROC(ret_from_fork)
598
599ENTRY(kernel_thread_starter)
600	la	%r2,0(%r10)
601	BASR_EX	%r14,%r9
602	j	.Lsysc_tracenogo
603ENDPROC(kernel_thread_starter)
604
605/*
606 * Program check handler routine
607 */
608
609ENTRY(pgm_check_handler)
610	stpt	__LC_SYNC_ENTER_TIMER
611	BPOFF
612	stmg	%r8,%r15,__LC_SAVE_AREA_SYNC
613	lg	%r10,__LC_LAST_BREAK
614	srag	%r11,%r10,12
615	jnz	0f
616	/* if __LC_LAST_BREAK is < 4096, it contains one of
617	 * the lpswe addresses in lowcore. Set it to 1 (initial state)
618	 * to prevent leaking that address to userspace.
619	 */
620	lghi	%r10,1
6210:	lg	%r12,__LC_CURRENT
622	lghi	%r11,0
623	larl	%r13,cleanup_critical
624	lmg	%r8,%r9,__LC_PGM_OLD_PSW
625	tmhh	%r8,0x0001		# test problem state bit
626	jnz	3f			# -> fault in user space
627#if IS_ENABLED(CONFIG_KVM)
628	# cleanup critical section for program checks in sie64a
629	lgr	%r14,%r9
630	slg	%r14,BASED(.Lsie_critical_start)
631	clg	%r14,BASED(.Lsie_critical_length)
632	jhe	1f
633	lg	%r14,__SF_SIE_CONTROL(%r15)	# get control block pointer
634	ni	__SIE_PROG0C+3(%r14),0xfe	# no longer in SIE
635	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
636	larl	%r9,sie_exit			# skip forward to sie_exit
637	lghi	%r11,_PIF_GUEST_FAULT
638#endif
6391:	tmhh	%r8,0x4000		# PER bit set in old PSW ?
640	jnz	2f			# -> enabled, can't be a double fault
641	tm	__LC_PGM_ILC+3,0x80	# check for per exception
642	jnz	.Lpgm_svcper		# -> single stepped svc
6432:	CHECK_STACK __LC_SAVE_AREA_SYNC
644	aghi	%r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
645	# CHECK_VMAP_STACK branches to stack_overflow or 5f
646	CHECK_VMAP_STACK __LC_SAVE_AREA_SYNC,5f
6473:	UPDATE_VTIME %r14,%r15,__LC_SYNC_ENTER_TIMER
648	BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
649	lg	%r15,__LC_KERNEL_STACK
650	lgr	%r14,%r12
651	aghi	%r14,__TASK_thread	# pointer to thread_struct
652	lghi	%r13,__LC_PGM_TDB
653	tm	__LC_PGM_ILC+2,0x02	# check for transaction abort
654	jz	4f
655	mvc	__THREAD_trap_tdb(256,%r14),0(%r13)
6564:	stg	%r10,__THREAD_last_break(%r14)
6575:	lgr	%r13,%r11
658	la	%r11,STACK_FRAME_OVERHEAD(%r15)
659	stmg	%r0,%r7,__PT_R0(%r11)
660	# clear user controlled registers to prevent speculative use
661	xgr	%r0,%r0
662	xgr	%r1,%r1
663	xgr	%r2,%r2
664	xgr	%r3,%r3
665	xgr	%r4,%r4
666	xgr	%r5,%r5
667	xgr	%r6,%r6
668	xgr	%r7,%r7
669	mvc	__PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
670	stmg	%r8,%r9,__PT_PSW(%r11)
671	mvc	__PT_INT_CODE(4,%r11),__LC_PGM_ILC
672	mvc	__PT_INT_PARM_LONG(8,%r11),__LC_TRANS_EXC_CODE
673	stg	%r13,__PT_FLAGS(%r11)
674	stg	%r10,__PT_ARGS(%r11)
675	tm	__LC_PGM_ILC+3,0x80	# check for per exception
676	jz	6f
677	tmhh	%r8,0x0001		# kernel per event ?
678	jz	.Lpgm_kprobe
679	oi	__PT_FLAGS+7(%r11),_PIF_PER_TRAP
680	mvc	__THREAD_per_address(8,%r14),__LC_PER_ADDRESS
681	mvc	__THREAD_per_cause(2,%r14),__LC_PER_CODE
682	mvc	__THREAD_per_paid(1,%r14),__LC_PER_ACCESS_ID
6836:	REENABLE_IRQS
684	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
685	larl	%r1,pgm_check_table
686	llgh	%r10,__PT_INT_CODE+2(%r11)
687	nill	%r10,0x007f
688	sll	%r10,3
689	je	.Lpgm_return
690	lg	%r9,0(%r10,%r1)		# load address of handler routine
691	lgr	%r2,%r11		# pass pointer to pt_regs
692	BASR_EX	%r14,%r9		# branch to interrupt-handler
693.Lpgm_return:
694	LOCKDEP_SYS_EXIT
695	tm	__PT_PSW+1(%r11),0x01	# returning to user ?
696	jno	.Lsysc_restore
697	TSTMSK	__PT_FLAGS(%r11),_PIF_SYSCALL
698	jo	.Lsysc_do_syscall
699	j	.Lsysc_tif
700
701#
702# PER event in supervisor state, must be kprobes
703#
704.Lpgm_kprobe:
705	REENABLE_IRQS
706	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
707	lgr	%r2,%r11		# pass pointer to pt_regs
708	brasl	%r14,do_per_trap
709	j	.Lpgm_return
710
711#
712# single stepped system call
713#
714.Lpgm_svcper:
715	mvc	__LC_RETURN_PSW(8),__LC_SVC_NEW_PSW
716	lghi	%r13,__TASK_thread
717	larl	%r14,.Lsysc_per
718	stg	%r14,__LC_RETURN_PSW+8
719	lghi	%r14,_PIF_SYSCALL | _PIF_PER_TRAP
720	lpswe	__LC_RETURN_PSW		# branch to .Lsysc_per and enable irqs
721ENDPROC(pgm_check_handler)
722
723/*
724 * IO interrupt handler routine
725 */
726ENTRY(io_int_handler)
727	STCK	__LC_INT_CLOCK
728	stpt	__LC_ASYNC_ENTER_TIMER
729	BPOFF
730	stmg	%r8,%r15,__LC_SAVE_AREA_ASYNC
731	lg	%r12,__LC_CURRENT
732	larl	%r13,cleanup_critical
733	lmg	%r8,%r9,__LC_IO_OLD_PSW
734	SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_ENTER_TIMER
735	stmg	%r0,%r7,__PT_R0(%r11)
736	# clear user controlled registers to prevent speculative use
737	xgr	%r0,%r0
738	xgr	%r1,%r1
739	xgr	%r2,%r2
740	xgr	%r3,%r3
741	xgr	%r4,%r4
742	xgr	%r5,%r5
743	xgr	%r6,%r6
744	xgr	%r7,%r7
745	xgr	%r10,%r10
746	mvc	__PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC
747	stmg	%r8,%r9,__PT_PSW(%r11)
748	mvc	__PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID
749	xc	__PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
750	TSTMSK	__LC_CPU_FLAGS,_CIF_IGNORE_IRQ
751	jo	.Lio_restore
752	TRACE_IRQS_OFF
753	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
754.Lio_loop:
755	lgr	%r2,%r11		# pass pointer to pt_regs
756	lghi	%r3,IO_INTERRUPT
757	tm	__PT_INT_CODE+8(%r11),0x80	# adapter interrupt ?
758	jz	.Lio_call
759	lghi	%r3,THIN_INTERRUPT
760.Lio_call:
761	brasl	%r14,do_IRQ
762	TSTMSK	__LC_MACHINE_FLAGS,MACHINE_FLAG_LPAR
763	jz	.Lio_return
764	tpi	0
765	jz	.Lio_return
766	mvc	__PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID
767	j	.Lio_loop
768.Lio_return:
769	LOCKDEP_SYS_EXIT
770	TRACE_IRQS_ON
771.Lio_tif:
772	TSTMSK	__TI_flags(%r12),_TIF_WORK
773	jnz	.Lio_work		# there is work to do (signals etc.)
774	TSTMSK	__LC_CPU_FLAGS,_CIF_WORK
775	jnz	.Lio_work
776.Lio_restore:
777	lg	%r14,__LC_VDSO_PER_CPU
778	lmg	%r0,%r10,__PT_R0(%r11)
779	mvc	__LC_RETURN_PSW(16),__PT_PSW(%r11)
780	tm	__PT_PSW+1(%r11),0x01	# returning to user ?
781	jno	.Lio_exit_kernel
782	BPEXIT	__TI_flags(%r12),_TIF_ISOLATE_BP
783.Lio_exit_timer:
784	stpt	__LC_EXIT_TIMER
785	mvc	__VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
786.Lio_exit_kernel:
787	lmg	%r11,%r15,__PT_R11(%r11)
788	b	__LC_RETURN_LPSWE(%r0)
789.Lio_done:
790
791#
792# There is work todo, find out in which context we have been interrupted:
793# 1) if we return to user space we can do all _TIF_WORK work
794# 2) if we return to kernel code and kvm is enabled check if we need to
795#    modify the psw to leave SIE
796# 3) if we return to kernel code and preemptive scheduling is enabled check
797#    the preemption counter and if it is zero call preempt_schedule_irq
798# Before any work can be done, a switch to the kernel stack is required.
799#
800.Lio_work:
801	tm	__PT_PSW+1(%r11),0x01	# returning to user ?
802	jo	.Lio_work_user		# yes -> do resched & signal
803#ifdef CONFIG_PREEMPTION
804	# check for preemptive scheduling
805	icm	%r0,15,__LC_PREEMPT_COUNT
806	jnz	.Lio_restore		# preemption is disabled
807	TSTMSK	__TI_flags(%r12),_TIF_NEED_RESCHED
808	jno	.Lio_restore
809	# switch to kernel stack
810	lg	%r1,__PT_R15(%r11)
811	aghi	%r1,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
812	mvc	STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11)
813	xc	__SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1)
814	la	%r11,STACK_FRAME_OVERHEAD(%r1)
815	lgr	%r15,%r1
816	# TRACE_IRQS_ON already done at .Lio_return, call
817	# TRACE_IRQS_OFF to keep things symmetrical
818	TRACE_IRQS_OFF
819	brasl	%r14,preempt_schedule_irq
820	j	.Lio_return
821#else
822	j	.Lio_restore
823#endif
824
825#
826# Need to do work before returning to userspace, switch to kernel stack
827#
828.Lio_work_user:
829	lg	%r1,__LC_KERNEL_STACK
830	mvc	STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11)
831	xc	__SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1)
832	la	%r11,STACK_FRAME_OVERHEAD(%r1)
833	lgr	%r15,%r1
834
835#
836# One of the work bits is on. Find out which one.
837#
838.Lio_work_tif:
839	TSTMSK	__LC_CPU_FLAGS,_CIF_MCCK_PENDING
840	jo	.Lio_mcck_pending
841	TSTMSK	__TI_flags(%r12),_TIF_NEED_RESCHED
842	jo	.Lio_reschedule
843#ifdef CONFIG_LIVEPATCH
844	TSTMSK	__TI_flags(%r12),_TIF_PATCH_PENDING
845	jo	.Lio_patch_pending
846#endif
847	TSTMSK	__TI_flags(%r12),_TIF_SIGPENDING
848	jo	.Lio_sigpending
849	TSTMSK	__TI_flags(%r12),_TIF_NOTIFY_RESUME
850	jo	.Lio_notify_resume
851	TSTMSK	__TI_flags(%r12),_TIF_GUARDED_STORAGE
852	jo	.Lio_guarded_storage
853	TSTMSK	__LC_CPU_FLAGS,_CIF_FPU
854	jo	.Lio_vxrs
855	TSTMSK	__LC_CPU_FLAGS,(_CIF_ASCE_PRIMARY|_CIF_ASCE_SECONDARY)
856	jnz	.Lio_asce
857	j	.Lio_return		# beware of critical section cleanup
858
859#
860# _CIF_MCCK_PENDING is set, call handler
861#
862.Lio_mcck_pending:
863	# TRACE_IRQS_ON already done at .Lio_return
864	brasl	%r14,s390_handle_mcck	# TIF bit will be cleared by handler
865	TRACE_IRQS_OFF
866	j	.Lio_return
867
868#
869# _CIF_ASCE_PRIMARY and/or CIF_ASCE_SECONDARY set, load user space asce
870#
871.Lio_asce:
872	ni	__LC_CPU_FLAGS+7,255-_CIF_ASCE_SECONDARY
873	lctlg	%c7,%c7,__LC_VDSO_ASCE		# load secondary asce
874	TSTMSK	__LC_CPU_FLAGS,_CIF_ASCE_PRIMARY
875	jz	.Lio_return
876#ifndef CONFIG_HAVE_MARCH_Z10_FEATURES
877	tm	__LC_STFLE_FAC_LIST+3,0x10	# has MVCOS ?
878	jnz	.Lio_set_fs_fixup
879	ni	__LC_CPU_FLAGS+7,255-_CIF_ASCE_PRIMARY
880	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
881	j	.Lio_return
882.Lio_set_fs_fixup:
883#endif
884	larl	%r14,.Lio_return
885	jg	set_fs_fixup
886
887#
888# CIF_FPU is set, restore floating-point controls and floating-point registers.
889#
890.Lio_vxrs:
891	larl	%r14,.Lio_return
892	jg	load_fpu_regs
893
894#
895# _TIF_GUARDED_STORAGE is set, call guarded_storage_load
896#
897.Lio_guarded_storage:
898	# TRACE_IRQS_ON already done at .Lio_return
899	ssm	__LC_SVC_NEW_PSW	# reenable interrupts
900	lgr	%r2,%r11		# pass pointer to pt_regs
901	brasl	%r14,gs_load_bc_cb
902	ssm	__LC_PGM_NEW_PSW	# disable I/O and ext. interrupts
903	TRACE_IRQS_OFF
904	j	.Lio_return
905
906#
907# _TIF_NEED_RESCHED is set, call schedule
908#
909.Lio_reschedule:
910	# TRACE_IRQS_ON already done at .Lio_return
911	ssm	__LC_SVC_NEW_PSW	# reenable interrupts
912	brasl	%r14,schedule		# call scheduler
913	ssm	__LC_PGM_NEW_PSW	# disable I/O and ext. interrupts
914	TRACE_IRQS_OFF
915	j	.Lio_return
916
917#
918# _TIF_PATCH_PENDING is set, call klp_update_patch_state
919#
920#ifdef CONFIG_LIVEPATCH
921.Lio_patch_pending:
922	lg	%r2,__LC_CURRENT	# pass pointer to task struct
923	larl	%r14,.Lio_return
924	jg	klp_update_patch_state
925#endif
926
927#
928# _TIF_SIGPENDING or is set, call do_signal
929#
930.Lio_sigpending:
931	# TRACE_IRQS_ON already done at .Lio_return
932	ssm	__LC_SVC_NEW_PSW	# reenable interrupts
933	lgr	%r2,%r11		# pass pointer to pt_regs
934	brasl	%r14,do_signal
935	ssm	__LC_PGM_NEW_PSW	# disable I/O and ext. interrupts
936	TRACE_IRQS_OFF
937	j	.Lio_return
938
939#
940# _TIF_NOTIFY_RESUME or is set, call do_notify_resume
941#
942.Lio_notify_resume:
943	# TRACE_IRQS_ON already done at .Lio_return
944	ssm	__LC_SVC_NEW_PSW	# reenable interrupts
945	lgr	%r2,%r11		# pass pointer to pt_regs
946	brasl	%r14,do_notify_resume
947	ssm	__LC_PGM_NEW_PSW	# disable I/O and ext. interrupts
948	TRACE_IRQS_OFF
949	j	.Lio_return
950ENDPROC(io_int_handler)
951
952/*
953 * External interrupt handler routine
954 */
955ENTRY(ext_int_handler)
956	STCK	__LC_INT_CLOCK
957	stpt	__LC_ASYNC_ENTER_TIMER
958	BPOFF
959	stmg	%r8,%r15,__LC_SAVE_AREA_ASYNC
960	lg	%r12,__LC_CURRENT
961	larl	%r13,cleanup_critical
962	lmg	%r8,%r9,__LC_EXT_OLD_PSW
963	SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_ENTER_TIMER
964	stmg	%r0,%r7,__PT_R0(%r11)
965	# clear user controlled registers to prevent speculative use
966	xgr	%r0,%r0
967	xgr	%r1,%r1
968	xgr	%r2,%r2
969	xgr	%r3,%r3
970	xgr	%r4,%r4
971	xgr	%r5,%r5
972	xgr	%r6,%r6
973	xgr	%r7,%r7
974	xgr	%r10,%r10
975	mvc	__PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC
976	stmg	%r8,%r9,__PT_PSW(%r11)
977	lghi	%r1,__LC_EXT_PARAMS2
978	mvc	__PT_INT_CODE(4,%r11),__LC_EXT_CPU_ADDR
979	mvc	__PT_INT_PARM(4,%r11),__LC_EXT_PARAMS
980	mvc	__PT_INT_PARM_LONG(8,%r11),0(%r1)
981	xc	__PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
982	TSTMSK	__LC_CPU_FLAGS,_CIF_IGNORE_IRQ
983	jo	.Lio_restore
984	TRACE_IRQS_OFF
985	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
986	lgr	%r2,%r11		# pass pointer to pt_regs
987	lghi	%r3,EXT_INTERRUPT
988	brasl	%r14,do_IRQ
989	j	.Lio_return
990ENDPROC(ext_int_handler)
991
992/*
993 * Load idle PSW. The second "half" of this function is in .Lcleanup_idle.
994 */
995ENTRY(psw_idle)
996	stg	%r3,__SF_EMPTY(%r15)
997	larl	%r1,.Lpsw_idle_lpsw+4
998	stg	%r1,__SF_EMPTY+8(%r15)
999	larl	%r1,smp_cpu_mtid
1000	llgf	%r1,0(%r1)
1001	ltgr	%r1,%r1
1002	jz	.Lpsw_idle_stcctm
1003	.insn	rsy,0xeb0000000017,%r1,5,__SF_EMPTY+16(%r15)
1004.Lpsw_idle_stcctm:
1005	oi	__LC_CPU_FLAGS+7,_CIF_ENABLED_WAIT
1006	BPON
1007	STCK	__CLOCK_IDLE_ENTER(%r2)
1008	stpt	__TIMER_IDLE_ENTER(%r2)
1009.Lpsw_idle_lpsw:
1010	lpswe	__SF_EMPTY(%r15)
1011	BR_EX	%r14
1012.Lpsw_idle_end:
1013ENDPROC(psw_idle)
1014
1015/*
1016 * Store floating-point controls and floating-point or vector register
1017 * depending whether the vector facility is available.	A critical section
1018 * cleanup assures that the registers are stored even if interrupted for
1019 * some other work.  The CIF_FPU flag is set to trigger a lazy restore
1020 * of the register contents at return from io or a system call.
1021 */
1022ENTRY(save_fpu_regs)
1023	lg	%r2,__LC_CURRENT
1024	aghi	%r2,__TASK_thread
1025	TSTMSK	__LC_CPU_FLAGS,_CIF_FPU
1026	jo	.Lsave_fpu_regs_exit
1027	stfpc	__THREAD_FPU_fpc(%r2)
1028	lg	%r3,__THREAD_FPU_regs(%r2)
1029	TSTMSK	__LC_MACHINE_FLAGS,MACHINE_FLAG_VX
1030	jz	.Lsave_fpu_regs_fp	  # no -> store FP regs
1031	VSTM	%v0,%v15,0,%r3		  # vstm 0,15,0(3)
1032	VSTM	%v16,%v31,256,%r3	  # vstm 16,31,256(3)
1033	j	.Lsave_fpu_regs_done	  # -> set CIF_FPU flag
1034.Lsave_fpu_regs_fp:
1035	std	0,0(%r3)
1036	std	1,8(%r3)
1037	std	2,16(%r3)
1038	std	3,24(%r3)
1039	std	4,32(%r3)
1040	std	5,40(%r3)
1041	std	6,48(%r3)
1042	std	7,56(%r3)
1043	std	8,64(%r3)
1044	std	9,72(%r3)
1045	std	10,80(%r3)
1046	std	11,88(%r3)
1047	std	12,96(%r3)
1048	std	13,104(%r3)
1049	std	14,112(%r3)
1050	std	15,120(%r3)
1051.Lsave_fpu_regs_done:
1052	oi	__LC_CPU_FLAGS+7,_CIF_FPU
1053.Lsave_fpu_regs_exit:
1054	BR_EX	%r14
1055.Lsave_fpu_regs_end:
1056ENDPROC(save_fpu_regs)
1057EXPORT_SYMBOL(save_fpu_regs)
1058
1059/*
1060 * Load floating-point controls and floating-point or vector registers.
1061 * A critical section cleanup assures that the register contents are
1062 * loaded even if interrupted for some other work.
1063 *
1064 * There are special calling conventions to fit into sysc and io return work:
1065 *	%r15:	<kernel stack>
1066 * The function requires:
1067 *	%r4
1068 */
1069load_fpu_regs:
1070	lg	%r4,__LC_CURRENT
1071	aghi	%r4,__TASK_thread
1072	TSTMSK	__LC_CPU_FLAGS,_CIF_FPU
1073	jno	.Lload_fpu_regs_exit
1074	lfpc	__THREAD_FPU_fpc(%r4)
1075	TSTMSK	__LC_MACHINE_FLAGS,MACHINE_FLAG_VX
1076	lg	%r4,__THREAD_FPU_regs(%r4)	# %r4 <- reg save area
1077	jz	.Lload_fpu_regs_fp		# -> no VX, load FP regs
1078	VLM	%v0,%v15,0,%r4
1079	VLM	%v16,%v31,256,%r4
1080	j	.Lload_fpu_regs_done
1081.Lload_fpu_regs_fp:
1082	ld	0,0(%r4)
1083	ld	1,8(%r4)
1084	ld	2,16(%r4)
1085	ld	3,24(%r4)
1086	ld	4,32(%r4)
1087	ld	5,40(%r4)
1088	ld	6,48(%r4)
1089	ld	7,56(%r4)
1090	ld	8,64(%r4)
1091	ld	9,72(%r4)
1092	ld	10,80(%r4)
1093	ld	11,88(%r4)
1094	ld	12,96(%r4)
1095	ld	13,104(%r4)
1096	ld	14,112(%r4)
1097	ld	15,120(%r4)
1098.Lload_fpu_regs_done:
1099	ni	__LC_CPU_FLAGS+7,255-_CIF_FPU
1100.Lload_fpu_regs_exit:
1101	BR_EX	%r14
1102.Lload_fpu_regs_end:
1103ENDPROC(load_fpu_regs)
1104
1105.L__critical_end:
1106
1107/*
1108 * Machine check handler routines
1109 */
1110ENTRY(mcck_int_handler)
1111	STCK	__LC_MCCK_CLOCK
1112	BPOFF
1113	la	%r1,4095		# validate r1
1114	spt	__LC_CPU_TIMER_SAVE_AREA-4095(%r1)	# validate cpu timer
1115	sckc	__LC_CLOCK_COMPARATOR			# validate comparator
1116	lam	%a0,%a15,__LC_AREGS_SAVE_AREA-4095(%r1) # validate acrs
1117	lmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# validate gprs
1118	lg	%r12,__LC_CURRENT
1119	larl	%r13,cleanup_critical
1120	lmg	%r8,%r9,__LC_MCK_OLD_PSW
1121	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_SYSTEM_DAMAGE
1122	jo	.Lmcck_panic		# yes -> rest of mcck code invalid
1123	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_CR_VALID
1124	jno	.Lmcck_panic		# control registers invalid -> panic
1125	la	%r14,4095
1126	lctlg	%c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r14) # validate ctl regs
1127	ptlb
1128	lg	%r11,__LC_MCESAD-4095(%r14) # extended machine check save area
1129	nill	%r11,0xfc00		# MCESA_ORIGIN_MASK
1130	TSTMSK	__LC_CREGS_SAVE_AREA+16-4095(%r14),CR2_GUARDED_STORAGE
1131	jno	0f
1132	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_GS_VALID
1133	jno	0f
1134	.insn	 rxy,0xe3000000004d,0,__MCESA_GS_SAVE_AREA(%r11) # LGSC
11350:	l	%r14,__LC_FP_CREG_SAVE_AREA-4095(%r14)
1136	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_FC_VALID
1137	jo	0f
1138	sr	%r14,%r14
11390:	sfpc	%r14
1140	TSTMSK	__LC_MACHINE_FLAGS,MACHINE_FLAG_VX
1141	jo	0f
1142	lghi	%r14,__LC_FPREGS_SAVE_AREA
1143	ld	%f0,0(%r14)
1144	ld	%f1,8(%r14)
1145	ld	%f2,16(%r14)
1146	ld	%f3,24(%r14)
1147	ld	%f4,32(%r14)
1148	ld	%f5,40(%r14)
1149	ld	%f6,48(%r14)
1150	ld	%f7,56(%r14)
1151	ld	%f8,64(%r14)
1152	ld	%f9,72(%r14)
1153	ld	%f10,80(%r14)
1154	ld	%f11,88(%r14)
1155	ld	%f12,96(%r14)
1156	ld	%f13,104(%r14)
1157	ld	%f14,112(%r14)
1158	ld	%f15,120(%r14)
1159	j	1f
11600:	VLM	%v0,%v15,0,%r11
1161	VLM	%v16,%v31,256,%r11
11621:	lghi	%r14,__LC_CPU_TIMER_SAVE_AREA
1163	mvc	__LC_MCCK_ENTER_TIMER(8),0(%r14)
1164	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_CPU_TIMER_VALID
1165	jo	3f
1166	la	%r14,__LC_SYNC_ENTER_TIMER
1167	clc	0(8,%r14),__LC_ASYNC_ENTER_TIMER
1168	jl	0f
1169	la	%r14,__LC_ASYNC_ENTER_TIMER
11700:	clc	0(8,%r14),__LC_EXIT_TIMER
1171	jl	1f
1172	la	%r14,__LC_EXIT_TIMER
11731:	clc	0(8,%r14),__LC_LAST_UPDATE_TIMER
1174	jl	2f
1175	la	%r14,__LC_LAST_UPDATE_TIMER
11762:	spt	0(%r14)
1177	mvc	__LC_MCCK_ENTER_TIMER(8),0(%r14)
11783:	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_PSW_MWP_VALID
1179	jno	.Lmcck_panic
1180	tmhh	%r8,0x0001		# interrupting from user ?
1181	jnz	4f
1182	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_PSW_IA_VALID
1183	jno	.Lmcck_panic
11844:	ssm	__LC_PGM_NEW_PSW	# turn dat on, keep irqs off
1185	SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+64,__LC_MCCK_ENTER_TIMER
1186.Lmcck_skip:
1187	lghi	%r14,__LC_GPREGS_SAVE_AREA+64
1188	stmg	%r0,%r7,__PT_R0(%r11)
1189	# clear user controlled registers to prevent speculative use
1190	xgr	%r0,%r0
1191	xgr	%r1,%r1
1192	xgr	%r2,%r2
1193	xgr	%r3,%r3
1194	xgr	%r4,%r4
1195	xgr	%r5,%r5
1196	xgr	%r6,%r6
1197	xgr	%r7,%r7
1198	xgr	%r10,%r10
1199	mvc	__PT_R8(64,%r11),0(%r14)
1200	stmg	%r8,%r9,__PT_PSW(%r11)
1201	xc	__PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
1202	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
1203	lgr	%r2,%r11		# pass pointer to pt_regs
1204	brasl	%r14,s390_do_machine_check
1205	tm	__PT_PSW+1(%r11),0x01	# returning to user ?
1206	jno	.Lmcck_return
1207	lg	%r1,__LC_KERNEL_STACK	# switch to kernel stack
1208	mvc	STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11)
1209	xc	__SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1)
1210	la	%r11,STACK_FRAME_OVERHEAD(%r1)
1211	lgr	%r15,%r1
1212	TSTMSK	__LC_CPU_FLAGS,_CIF_MCCK_PENDING
1213	jno	.Lmcck_return
1214	TRACE_IRQS_OFF
1215	brasl	%r14,s390_handle_mcck
1216	TRACE_IRQS_ON
1217.Lmcck_return:
1218	lg	%r14,__LC_VDSO_PER_CPU
1219	lmg	%r0,%r10,__PT_R0(%r11)
1220	mvc	__LC_RETURN_MCCK_PSW(16),__PT_PSW(%r11) # move return PSW
1221	tm	__LC_RETURN_MCCK_PSW+1,0x01 # returning to user ?
1222	jno	0f
1223	BPEXIT	__TI_flags(%r12),_TIF_ISOLATE_BP
1224	stpt	__LC_EXIT_TIMER
1225	mvc	__VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
12260:	lmg	%r11,%r15,__PT_R11(%r11)
1227	b	__LC_RETURN_MCCK_LPSWE
1228
1229.Lmcck_panic:
1230	lg	%r15,__LC_NODAT_STACK
1231	la	%r11,STACK_FRAME_OVERHEAD(%r15)
1232	j	.Lmcck_skip
1233ENDPROC(mcck_int_handler)
1234
1235#
1236# PSW restart interrupt handler
1237#
1238ENTRY(restart_int_handler)
1239	ALTERNATIVE "", ".insn s,0xb2800000,_LPP_OFFSET", 40
1240	stg	%r15,__LC_SAVE_AREA_RESTART
1241	lg	%r15,__LC_RESTART_STACK
1242	xc	STACK_FRAME_OVERHEAD(__PT_SIZE,%r15),STACK_FRAME_OVERHEAD(%r15)
1243	stmg	%r0,%r14,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
1244	mvc	STACK_FRAME_OVERHEAD+__PT_R15(8,%r15),__LC_SAVE_AREA_RESTART
1245	mvc	STACK_FRAME_OVERHEAD+__PT_PSW(16,%r15),__LC_RST_OLD_PSW
1246	xc	0(STACK_FRAME_OVERHEAD,%r15),0(%r15)
1247	lg	%r1,__LC_RESTART_FN		# load fn, parm & source cpu
1248	lg	%r2,__LC_RESTART_DATA
1249	lg	%r3,__LC_RESTART_SOURCE
1250	ltgr	%r3,%r3				# test source cpu address
1251	jm	1f				# negative -> skip source stop
12520:	sigp	%r4,%r3,SIGP_SENSE		# sigp sense to source cpu
1253	brc	10,0b				# wait for status stored
12541:	basr	%r14,%r1			# call function
1255	stap	__SF_EMPTY(%r15)		# store cpu address
1256	llgh	%r3,__SF_EMPTY(%r15)
12572:	sigp	%r4,%r3,SIGP_STOP		# sigp stop to current cpu
1258	brc	2,2b
12593:	j	3b
1260ENDPROC(restart_int_handler)
1261
1262	.section .kprobes.text, "ax"
1263
1264#if defined(CONFIG_CHECK_STACK) || defined(CONFIG_VMAP_STACK)
1265/*
1266 * The synchronous or the asynchronous stack overflowed. We are dead.
1267 * No need to properly save the registers, we are going to panic anyway.
1268 * Setup a pt_regs so that show_trace can provide a good call trace.
1269 */
1270ENTRY(stack_overflow)
1271	lg	%r15,__LC_NODAT_STACK	# change to panic stack
1272	la	%r11,STACK_FRAME_OVERHEAD(%r15)
1273	stmg	%r0,%r7,__PT_R0(%r11)
1274	stmg	%r8,%r9,__PT_PSW(%r11)
1275	mvc	__PT_R8(64,%r11),0(%r14)
1276	stg	%r10,__PT_ORIG_GPR2(%r11) # store last break to orig_gpr2
1277	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
1278	lgr	%r2,%r11		# pass pointer to pt_regs
1279	jg	kernel_stack_overflow
1280ENDPROC(stack_overflow)
1281#endif
1282
1283ENTRY(cleanup_critical)
1284	cghi	%r9,__LC_RETURN_LPSWE
1285	je	.Lcleanup_lpswe
1286#if IS_ENABLED(CONFIG_KVM)
1287	clg	%r9,BASED(.Lcleanup_table_sie)	# .Lsie_gmap
1288	jl	0f
1289	clg	%r9,BASED(.Lcleanup_table_sie+8)# .Lsie_done
1290	jl	.Lcleanup_sie
1291#endif
1292	clg	%r9,BASED(.Lcleanup_table)	# system_call
1293	jl	0f
1294	clg	%r9,BASED(.Lcleanup_table+8)	# .Lsysc_do_svc
1295	jl	.Lcleanup_system_call
1296	clg	%r9,BASED(.Lcleanup_table+16)	# .Lsysc_tif
1297	jl	0f
1298	clg	%r9,BASED(.Lcleanup_table+24)	# .Lsysc_restore
1299	jl	.Lcleanup_sysc_tif
1300	clg	%r9,BASED(.Lcleanup_table+32)	# .Lsysc_done
1301	jl	.Lcleanup_sysc_restore
1302	clg	%r9,BASED(.Lcleanup_table+40)	# .Lio_tif
1303	jl	0f
1304	clg	%r9,BASED(.Lcleanup_table+48)	# .Lio_restore
1305	jl	.Lcleanup_io_tif
1306	clg	%r9,BASED(.Lcleanup_table+56)	# .Lio_done
1307	jl	.Lcleanup_io_restore
1308	clg	%r9,BASED(.Lcleanup_table+64)	# psw_idle
1309	jl	0f
1310	clg	%r9,BASED(.Lcleanup_table+72)	# .Lpsw_idle_end
1311	jl	.Lcleanup_idle
1312	clg	%r9,BASED(.Lcleanup_table+80)	# save_fpu_regs
1313	jl	0f
1314	clg	%r9,BASED(.Lcleanup_table+88)	# .Lsave_fpu_regs_end
1315	jl	.Lcleanup_save_fpu_regs
1316	clg	%r9,BASED(.Lcleanup_table+96)	# load_fpu_regs
1317	jl	0f
1318	clg	%r9,BASED(.Lcleanup_table+104)	# .Lload_fpu_regs_end
1319	jl	.Lcleanup_load_fpu_regs
13200:	BR_EX	%r14,%r11
1321ENDPROC(cleanup_critical)
1322
1323	.align	8
1324.Lcleanup_table:
1325	.quad	system_call
1326	.quad	.Lsysc_do_svc
1327	.quad	.Lsysc_tif
1328	.quad	.Lsysc_restore
1329	.quad	.Lsysc_done
1330	.quad	.Lio_tif
1331	.quad	.Lio_restore
1332	.quad	.Lio_done
1333	.quad	psw_idle
1334	.quad	.Lpsw_idle_end
1335	.quad	save_fpu_regs
1336	.quad	.Lsave_fpu_regs_end
1337	.quad	load_fpu_regs
1338	.quad	.Lload_fpu_regs_end
1339
1340#if IS_ENABLED(CONFIG_KVM)
1341.Lcleanup_table_sie:
1342	.quad	.Lsie_gmap
1343	.quad	.Lsie_done
1344
1345.Lcleanup_sie:
1346	cghi    %r11,__LC_SAVE_AREA_ASYNC 	#Is this in normal interrupt?
1347	je      1f
1348	slg     %r9,BASED(.Lsie_crit_mcck_start)
1349	clg     %r9,BASED(.Lsie_crit_mcck_length)
1350	jh      1f
1351	oi      __LC_CPU_FLAGS+7, _CIF_MCCK_GUEST
13521:	BPENTER __SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
1353	lg	%r9,__SF_SIE_CONTROL(%r15)	# get control block pointer
1354	ni	__SIE_PROG0C+3(%r9),0xfe	# no longer in SIE
1355	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
1356	larl	%r9,sie_exit			# skip forward to sie_exit
1357	BR_EX	%r14,%r11
1358#endif
1359
1360.Lcleanup_system_call:
1361	# check if stpt has been executed
1362	clg	%r9,BASED(.Lcleanup_system_call_insn)
1363	jh	0f
1364	mvc	__LC_SYNC_ENTER_TIMER(8),__LC_ASYNC_ENTER_TIMER
1365	cghi	%r11,__LC_SAVE_AREA_ASYNC
1366	je	0f
1367	mvc	__LC_SYNC_ENTER_TIMER(8),__LC_MCCK_ENTER_TIMER
13680:	# check if stmg has been executed
1369	clg	%r9,BASED(.Lcleanup_system_call_insn+8)
1370	jh	0f
1371	mvc	__LC_SAVE_AREA_SYNC(64),0(%r11)
13720:	# check if base register setup + TIF bit load has been done
1373	clg	%r9,BASED(.Lcleanup_system_call_insn+16)
1374	jhe	0f
1375	# set up saved register r12 task struct pointer
1376	stg	%r12,32(%r11)
1377	# set up saved register r13 __TASK_thread offset
1378	mvc	40(8,%r11),BASED(.Lcleanup_system_call_const)
13790:	# check if the user time update has been done
1380	clg	%r9,BASED(.Lcleanup_system_call_insn+24)
1381	jh	0f
1382	lg	%r15,__LC_EXIT_TIMER
1383	slg	%r15,__LC_SYNC_ENTER_TIMER
1384	alg	%r15,__LC_USER_TIMER
1385	stg	%r15,__LC_USER_TIMER
13860:	# check if the system time update has been done
1387	clg	%r9,BASED(.Lcleanup_system_call_insn+32)
1388	jh	0f
1389	lg	%r15,__LC_LAST_UPDATE_TIMER
1390	slg	%r15,__LC_EXIT_TIMER
1391	alg	%r15,__LC_SYSTEM_TIMER
1392	stg	%r15,__LC_SYSTEM_TIMER
13930:	# update accounting time stamp
1394	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
1395	BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
1396	# set up saved register r11
1397	lg	%r15,__LC_KERNEL_STACK
1398	la	%r9,STACK_FRAME_OVERHEAD(%r15)
1399	stg	%r9,24(%r11)		# r11 pt_regs pointer
1400	# fill pt_regs
1401	mvc	__PT_R8(64,%r9),__LC_SAVE_AREA_SYNC
1402	stmg	%r0,%r7,__PT_R0(%r9)
1403	mvc	__PT_PSW(16,%r9),__LC_SVC_OLD_PSW
1404	mvc	__PT_INT_CODE(4,%r9),__LC_SVC_ILC
1405	xc	__PT_FLAGS(8,%r9),__PT_FLAGS(%r9)
1406	mvi	__PT_FLAGS+7(%r9),_PIF_SYSCALL
1407	# setup saved register r15
1408	stg	%r15,56(%r11)		# r15 stack pointer
1409	# set new psw address and exit
1410	larl	%r9,.Lsysc_do_svc
1411	BR_EX	%r14,%r11
1412.Lcleanup_system_call_insn:
1413	.quad	system_call
1414	.quad	.Lsysc_stmg
1415	.quad	.Lsysc_per
1416	.quad	.Lsysc_vtime+36
1417	.quad	.Lsysc_vtime+42
1418.Lcleanup_system_call_const:
1419	.quad	__TASK_thread
1420
1421.Lcleanup_sysc_tif:
1422	larl	%r9,.Lsysc_tif
1423	BR_EX	%r14,%r11
1424
1425.Lcleanup_sysc_restore:
1426	# check if stpt has been executed
1427	clg	%r9,BASED(.Lcleanup_sysc_restore_insn)
1428	jh	0f
1429	mvc	__LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
1430	cghi	%r11,__LC_SAVE_AREA_ASYNC
1431	je	0f
1432	mvc	__LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER
14330:	clg	%r9,BASED(.Lcleanup_sysc_restore_insn+8)
1434	je	1f
1435	lg	%r9,24(%r11)		# get saved pointer to pt_regs
1436	mvc	__LC_RETURN_PSW(16),__PT_PSW(%r9)
1437	mvc	0(64,%r11),__PT_R8(%r9)
1438	lmg	%r0,%r7,__PT_R0(%r9)
1439.Lcleanup_lpswe:
14401:	lmg	%r8,%r9,__LC_RETURN_PSW
1441	BR_EX	%r14,%r11
1442.Lcleanup_sysc_restore_insn:
1443	.quad	.Lsysc_exit_timer
1444	.quad	.Lsysc_done - 4
1445
1446.Lcleanup_io_tif:
1447	larl	%r9,.Lio_tif
1448	BR_EX	%r14,%r11
1449
1450.Lcleanup_io_restore:
1451	# check if stpt has been executed
1452	clg	%r9,BASED(.Lcleanup_io_restore_insn)
1453	jh	0f
1454	mvc	__LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER
14550:	clg	%r9,BASED(.Lcleanup_io_restore_insn+8)
1456	je	1f
1457	lg	%r9,24(%r11)		# get saved r11 pointer to pt_regs
1458	mvc	__LC_RETURN_PSW(16),__PT_PSW(%r9)
1459	mvc	0(64,%r11),__PT_R8(%r9)
1460	lmg	%r0,%r7,__PT_R0(%r9)
14611:	lmg	%r8,%r9,__LC_RETURN_PSW
1462	BR_EX	%r14,%r11
1463.Lcleanup_io_restore_insn:
1464	.quad	.Lio_exit_timer
1465	.quad	.Lio_done - 4
1466
1467.Lcleanup_idle:
1468	ni	__LC_CPU_FLAGS+7,255-_CIF_ENABLED_WAIT
1469	# copy interrupt clock & cpu timer
1470	mvc	__CLOCK_IDLE_EXIT(8,%r2),__LC_INT_CLOCK
1471	mvc	__TIMER_IDLE_EXIT(8,%r2),__LC_ASYNC_ENTER_TIMER
1472	cghi	%r11,__LC_SAVE_AREA_ASYNC
1473	je	0f
1474	mvc	__CLOCK_IDLE_EXIT(8,%r2),__LC_MCCK_CLOCK
1475	mvc	__TIMER_IDLE_EXIT(8,%r2),__LC_MCCK_ENTER_TIMER
14760:	# check if stck & stpt have been executed
1477	clg	%r9,BASED(.Lcleanup_idle_insn)
1478	jhe	1f
1479	mvc	__CLOCK_IDLE_ENTER(8,%r2),__CLOCK_IDLE_EXIT(%r2)
1480	mvc	__TIMER_IDLE_ENTER(8,%r2),__TIMER_IDLE_EXIT(%r2)
14811:	# calculate idle cycles
1482	clg	%r9,BASED(.Lcleanup_idle_insn)
1483	jl	3f
1484	larl	%r1,smp_cpu_mtid
1485	llgf	%r1,0(%r1)
1486	ltgr	%r1,%r1
1487	jz	3f
1488	.insn	rsy,0xeb0000000017,%r1,5,__SF_EMPTY+80(%r15)
1489	larl	%r3,mt_cycles
1490	ag	%r3,__LC_PERCPU_OFFSET
1491	la	%r4,__SF_EMPTY+16(%r15)
14922:	lg	%r0,0(%r3)
1493	slg	%r0,0(%r4)
1494	alg	%r0,64(%r4)
1495	stg	%r0,0(%r3)
1496	la	%r3,8(%r3)
1497	la	%r4,8(%r4)
1498	brct	%r1,2b
14993:	# account system time going idle
1500	lg	%r9,__LC_STEAL_TIMER
1501	alg	%r9,__CLOCK_IDLE_ENTER(%r2)
1502	slg	%r9,__LC_LAST_UPDATE_CLOCK
1503	stg	%r9,__LC_STEAL_TIMER
1504	mvc	__LC_LAST_UPDATE_CLOCK(8),__CLOCK_IDLE_EXIT(%r2)
1505	lg	%r9,__LC_SYSTEM_TIMER
1506	alg	%r9,__LC_LAST_UPDATE_TIMER
1507	slg	%r9,__TIMER_IDLE_ENTER(%r2)
1508	stg	%r9,__LC_SYSTEM_TIMER
1509	mvc	__LC_LAST_UPDATE_TIMER(8),__TIMER_IDLE_EXIT(%r2)
1510	# prepare return psw
1511	nihh	%r8,0xfcfd		# clear irq & wait state bits
1512	lg	%r9,48(%r11)		# return from psw_idle
1513	BR_EX	%r14,%r11
1514.Lcleanup_idle_insn:
1515	.quad	.Lpsw_idle_lpsw
1516
1517.Lcleanup_save_fpu_regs:
1518	larl	%r9,save_fpu_regs
1519	BR_EX	%r14,%r11
1520
1521.Lcleanup_load_fpu_regs:
1522	larl	%r9,load_fpu_regs
1523	BR_EX	%r14,%r11
1524
1525/*
1526 * Integer constants
1527 */
1528	.align	8
1529.Lcritical_start:
1530	.quad	.L__critical_start
1531.Lcritical_length:
1532	.quad	.L__critical_end - .L__critical_start
1533#if IS_ENABLED(CONFIG_KVM)
1534.Lsie_critical_start:
1535	.quad	.Lsie_gmap
1536.Lsie_critical_length:
1537	.quad	.Lsie_done - .Lsie_gmap
1538.Lsie_crit_mcck_start:
1539	.quad   .Lsie_entry
1540.Lsie_crit_mcck_length:
1541	.quad   .Lsie_skip - .Lsie_entry
1542#endif
1543	.section .rodata, "a"
1544#define SYSCALL(esame,emu)	.quad __s390x_ ## esame
1545	.globl	sys_call_table
1546sys_call_table:
1547#include "asm/syscall_table.h"
1548#undef SYSCALL
1549
1550#ifdef CONFIG_COMPAT
1551
1552#define SYSCALL(esame,emu)	.quad __s390_ ## emu
1553	.globl	sys_call_table_emu
1554sys_call_table_emu:
1555#include "asm/syscall_table.h"
1556#undef SYSCALL
1557#endif
1558