xref: /openbmc/linux/arch/s390/kernel/entry.S (revision 2326f3cd)
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 *    S390 low-level entry points.
4 *
5 *    Copyright IBM Corp. 1999, 2012
6 *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
7 *		 Hartmut Penner (hp@de.ibm.com),
8 *		 Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
9 *		 Heiko Carstens <heiko.carstens@de.ibm.com>
10 */
11
12#include <linux/init.h>
13#include <linux/linkage.h>
14#include <asm/alternative-asm.h>
15#include <asm/processor.h>
16#include <asm/cache.h>
17#include <asm/dwarf.h>
18#include <asm/errno.h>
19#include <asm/ptrace.h>
20#include <asm/thread_info.h>
21#include <asm/asm-offsets.h>
22#include <asm/unistd.h>
23#include <asm/page.h>
24#include <asm/sigp.h>
25#include <asm/irq.h>
26#include <asm/vx-insn.h>
27#include <asm/setup.h>
28#include <asm/nmi.h>
29#include <asm/export.h>
30#include <asm/nospec-insn.h>
31
32__PT_R0      =	__PT_GPRS
33__PT_R1      =	__PT_GPRS + 8
34__PT_R2      =	__PT_GPRS + 16
35__PT_R3      =	__PT_GPRS + 24
36__PT_R4      =	__PT_GPRS + 32
37__PT_R5      =	__PT_GPRS + 40
38__PT_R6      =	__PT_GPRS + 48
39__PT_R7      =	__PT_GPRS + 56
40__PT_R8      =	__PT_GPRS + 64
41__PT_R9      =	__PT_GPRS + 72
42__PT_R10     =	__PT_GPRS + 80
43__PT_R11     =	__PT_GPRS + 88
44__PT_R12     =	__PT_GPRS + 96
45__PT_R13     =	__PT_GPRS + 104
46__PT_R14     =	__PT_GPRS + 112
47__PT_R15     =	__PT_GPRS + 120
48
49STACK_SHIFT = PAGE_SHIFT + THREAD_SIZE_ORDER
50STACK_SIZE  = 1 << STACK_SHIFT
51STACK_INIT = STACK_SIZE - STACK_FRAME_OVERHEAD - __PT_SIZE
52
53_LPP_OFFSET	= __LC_LPP
54
55	.macro	CHECK_STACK savearea
56#ifdef CONFIG_CHECK_STACK
57	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
58	lghi	%r14,\savearea
59	jz	stack_overflow
60#endif
61	.endm
62
63	.macro	CHECK_VMAP_STACK savearea,oklabel
64#ifdef CONFIG_VMAP_STACK
65	lgr	%r14,%r15
66	nill	%r14,0x10000 - STACK_SIZE
67	oill	%r14,STACK_INIT
68	clg	%r14,__LC_KERNEL_STACK
69	je	\oklabel
70	clg	%r14,__LC_ASYNC_STACK
71	je	\oklabel
72	clg	%r14,__LC_MCCK_STACK
73	je	\oklabel
74	clg	%r14,__LC_NODAT_STACK
75	je	\oklabel
76	clg	%r14,__LC_RESTART_STACK
77	je	\oklabel
78	lghi	%r14,\savearea
79	j	stack_overflow
80#else
81	j	\oklabel
82#endif
83	.endm
84
85	.macro STCK savearea
86	ALTERNATIVE ".insn	s,0xb2050000,\savearea", \
87		    ".insn	s,0xb27c0000,\savearea", 25
88	.endm
89
90	/*
91	 * The TSTMSK macro generates a test-under-mask instruction by
92	 * calculating the memory offset for the specified mask value.
93	 * Mask value can be any constant.  The macro shifts the mask
94	 * value to calculate the memory offset for the test-under-mask
95	 * instruction.
96	 */
97	.macro TSTMSK addr, mask, size=8, bytepos=0
98		.if (\bytepos < \size) && (\mask >> 8)
99			.if (\mask & 0xff)
100				.error "Mask exceeds byte boundary"
101			.endif
102			TSTMSK \addr, "(\mask >> 8)", \size, "(\bytepos + 1)"
103			.exitm
104		.endif
105		.ifeq \mask
106			.error "Mask must not be zero"
107		.endif
108		off = \size - \bytepos - 1
109		tm	off+\addr, \mask
110	.endm
111
112	.macro BPOFF
113	ALTERNATIVE "", ".long 0xb2e8c000", 82
114	.endm
115
116	.macro BPON
117	ALTERNATIVE "", ".long 0xb2e8d000", 82
118	.endm
119
120	.macro BPENTER tif_ptr,tif_mask
121	ALTERNATIVE "TSTMSK \tif_ptr,\tif_mask; jz .+8; .long 0xb2e8d000", \
122		    "", 82
123	.endm
124
125	.macro BPEXIT tif_ptr,tif_mask
126	TSTMSK	\tif_ptr,\tif_mask
127	ALTERNATIVE "jz .+8;  .long 0xb2e8c000", \
128		    "jnz .+8; .long 0xb2e8d000", 82
129	.endm
130
131	/*
132	 * The CHKSTG macro jumps to the provided label in case the
133	 * machine check interruption code reports one of unrecoverable
134	 * storage errors:
135	 * - Storage error uncorrected
136	 * - Storage key error uncorrected
137	 * - Storage degradation with Failing-storage-address validity
138	 */
139	.macro CHKSTG errlabel
140	TSTMSK	__LC_MCCK_CODE,(MCCK_CODE_STG_ERROR|MCCK_CODE_STG_KEY_ERROR)
141	jnz	\errlabel
142	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_STG_DEGRAD
143	jz	.Loklabel\@
144	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_STG_FAIL_ADDR
145	jnz	\errlabel
146.Loklabel\@:
147	.endm
148
149#if IS_ENABLED(CONFIG_KVM)
150	/*
151	 * The OUTSIDE macro jumps to the provided label in case the value
152	 * in the provided register is outside of the provided range. The
153	 * macro is useful for checking whether a PSW stored in a register
154	 * pair points inside or outside of a block of instructions.
155	 * @reg: register to check
156	 * @start: start of the range
157	 * @end: end of the range
158	 * @outside_label: jump here if @reg is outside of [@start..@end)
159	 */
160	.macro OUTSIDE reg,start,end,outside_label
161	lgr	%r14,\reg
162	larl	%r13,\start
163	slgr	%r14,%r13
164	lghi	%r13,\end - \start
165	clgr	%r14,%r13
166	jhe	\outside_label
167	.endm
168
169	.macro SIEEXIT
170	lg	%r9,__SF_SIE_CONTROL(%r15)	# get control block pointer
171	ni	__SIE_PROG0C+3(%r9),0xfe	# no longer in SIE
172	lctlg	%c1,%c1,__LC_KERNEL_ASCE	# load primary asce
173	larl	%r9,sie_exit			# skip forward to sie_exit
174	.endm
175#endif
176
177	GEN_BR_THUNK %r14
178	GEN_BR_THUNK %r14,%r13
179
180	.section .kprobes.text, "ax"
181.Ldummy:
182	/*
183	 * This nop exists only in order to avoid that __bpon starts at
184	 * the beginning of the kprobes text section. In that case we would
185	 * have several symbols at the same address. E.g. objdump would take
186	 * an arbitrary symbol name when disassembling this code.
187	 * With the added nop in between the __bpon symbol is unique
188	 * again.
189	 */
190	nop	0
191
192ENTRY(__bpon)
193	.globl __bpon
194	BPON
195	BR_EX	%r14
196ENDPROC(__bpon)
197
198/*
199 * Scheduler resume function, called by switch_to
200 *  gpr2 = (task_struct *) prev
201 *  gpr3 = (task_struct *) next
202 * Returns:
203 *  gpr2 = prev
204 */
205ENTRY(__switch_to)
206	stmg	%r6,%r15,__SF_GPRS(%r15)	# store gprs of prev task
207	lghi	%r4,__TASK_stack
208	lghi	%r1,__TASK_thread
209	llill	%r5,STACK_INIT
210	stg	%r15,__THREAD_ksp(%r1,%r2)	# store kernel stack of prev
211	lg	%r15,0(%r4,%r3)			# start of kernel stack of next
212	agr	%r15,%r5			# end of kernel stack of next
213	stg	%r3,__LC_CURRENT		# store task struct of next
214	stg	%r15,__LC_KERNEL_STACK		# store end of kernel stack
215	lg	%r15,__THREAD_ksp(%r1,%r3)	# load kernel stack of next
216	aghi	%r3,__TASK_pid
217	mvc	__LC_CURRENT_PID(4,%r0),0(%r3)	# store pid of next
218	lmg	%r6,%r15,__SF_GPRS(%r15)	# load gprs of next task
219	ALTERNATIVE "", ".insn s,0xb2800000,_LPP_OFFSET", 40
220	BR_EX	%r14
221ENDPROC(__switch_to)
222
223#if IS_ENABLED(CONFIG_KVM)
224/*
225 * sie64a calling convention:
226 * %r2 pointer to sie control block
227 * %r3 guest register save area
228 */
229ENTRY(sie64a)
230	stmg	%r6,%r14,__SF_GPRS(%r15)	# save kernel registers
231	lg	%r12,__LC_CURRENT
232	stg	%r2,__SF_SIE_CONTROL(%r15)	# save control block pointer
233	stg	%r3,__SF_SIE_SAVEAREA(%r15)	# save guest register save area
234	xc	__SF_SIE_REASON(8,%r15),__SF_SIE_REASON(%r15) # reason code = 0
235	mvc	__SF_SIE_FLAGS(8,%r15),__TI_flags(%r12) # copy thread flags
236	lmg	%r0,%r13,0(%r3)			# load guest gprs 0-13
237	lg	%r14,__LC_GMAP			# get gmap pointer
238	ltgr	%r14,%r14
239	jz	.Lsie_gmap
240	lctlg	%c1,%c1,__GMAP_ASCE(%r14)	# load primary asce
241.Lsie_gmap:
242	lg	%r14,__SF_SIE_CONTROL(%r15)	# get control block pointer
243	oi	__SIE_PROG0C+3(%r14),1		# we are going into SIE now
244	tm	__SIE_PROG20+3(%r14),3		# last exit...
245	jnz	.Lsie_skip
246	TSTMSK	__LC_CPU_FLAGS,_CIF_FPU
247	jo	.Lsie_skip			# exit if fp/vx regs changed
248	BPEXIT	__SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
249.Lsie_entry:
250	sie	0(%r14)
251	BPOFF
252	BPENTER	__SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
253.Lsie_skip:
254	ni	__SIE_PROG0C+3(%r14),0xfe	# no longer in SIE
255	lctlg	%c1,%c1,__LC_KERNEL_ASCE	# load primary asce
256.Lsie_done:
257# some program checks are suppressing. C code (e.g. do_protection_exception)
258# will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There
259# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable.
260# Other instructions between sie64a and .Lsie_done should not cause program
261# interrupts. So lets use 3 nops as a landing pad for all possible rewinds.
262.Lrewind_pad6:
263	nopr	7
264.Lrewind_pad4:
265	nopr	7
266.Lrewind_pad2:
267	nopr	7
268	.globl sie_exit
269sie_exit:
270	lg	%r14,__SF_SIE_SAVEAREA(%r15)	# load guest register save area
271	stmg	%r0,%r13,0(%r14)		# save guest gprs 0-13
272	xgr	%r0,%r0				# clear guest registers to
273	xgr	%r1,%r1				# prevent speculative use
274	xgr	%r3,%r3
275	xgr	%r4,%r4
276	xgr	%r5,%r5
277	lmg	%r6,%r14,__SF_GPRS(%r15)	# restore kernel registers
278	lg	%r2,__SF_SIE_REASON(%r15)	# return exit reason code
279	BR_EX	%r14
280.Lsie_fault:
281	lghi	%r14,-EFAULT
282	stg	%r14,__SF_SIE_REASON(%r15)	# set exit reason code
283	j	sie_exit
284
285	EX_TABLE(.Lrewind_pad6,.Lsie_fault)
286	EX_TABLE(.Lrewind_pad4,.Lsie_fault)
287	EX_TABLE(.Lrewind_pad2,.Lsie_fault)
288	EX_TABLE(sie_exit,.Lsie_fault)
289ENDPROC(sie64a)
290EXPORT_SYMBOL(sie64a)
291EXPORT_SYMBOL(sie_exit)
292#endif
293
294/*
295 * SVC interrupt handler routine. System calls are synchronous events and
296 * are entered with interrupts disabled.
297 */
298
299ENTRY(system_call)
300	stpt	__LC_SYS_ENTER_TIMER
301	stmg	%r8,%r15,__LC_SAVE_AREA_SYNC
302	BPOFF
303	lghi	%r14,0
304.Lsysc_per:
305	lctlg	%c1,%c1,__LC_KERNEL_ASCE
306	lg	%r12,__LC_CURRENT
307	lg	%r15,__LC_KERNEL_STACK
308	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
309	stmg	%r0,%r7,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
310	BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
311	# clear user controlled register to prevent speculative use
312	xgr	%r0,%r0
313	xgr	%r1,%r1
314	xgr	%r4,%r4
315	xgr	%r5,%r5
316	xgr	%r6,%r6
317	xgr	%r7,%r7
318	xgr	%r8,%r8
319	xgr	%r9,%r9
320	xgr	%r10,%r10
321	xgr	%r11,%r11
322	la	%r2,STACK_FRAME_OVERHEAD(%r15)	# pointer to pt_regs
323	mvc	__PT_R8(64,%r2),__LC_SAVE_AREA_SYNC
324	lgr	%r3,%r14
325	brasl	%r14,__do_syscall
326	lctlg	%c1,%c1,__LC_USER_ASCE
327	mvc	__LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
328	BPEXIT __TI_flags(%r12),_TIF_ISOLATE_BP
329	lmg	%r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
330	stpt	__LC_EXIT_TIMER
331	b	__LC_RETURN_LPSWE
332ENDPROC(system_call)
333
334#
335# a new process exits the kernel with ret_from_fork
336#
337ENTRY(ret_from_fork)
338	lgr	%r3,%r11
339	brasl	%r14,__ret_from_fork
340	lctlg	%c1,%c1,__LC_USER_ASCE
341	mvc	__LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
342	BPEXIT __TI_flags(%r12),_TIF_ISOLATE_BP
343	lmg	%r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
344	stpt	__LC_EXIT_TIMER
345	b	__LC_RETURN_LPSWE
346ENDPROC(ret_from_fork)
347
348/*
349 * Program check handler routine
350 */
351
352ENTRY(pgm_check_handler)
353	stpt	__LC_SYS_ENTER_TIMER
354	BPOFF
355	stmg	%r8,%r15,__LC_SAVE_AREA_SYNC
356	lg	%r12,__LC_CURRENT
357	lghi	%r10,0
358	lmg	%r8,%r9,__LC_PGM_OLD_PSW
359	tmhh	%r8,0x0001		# coming from user space?
360	jno	.Lpgm_skip_asce
361	lctlg	%c1,%c1,__LC_KERNEL_ASCE
362	j	3f			# -> fault in user space
363.Lpgm_skip_asce:
364#if IS_ENABLED(CONFIG_KVM)
365	# cleanup critical section for program checks in sie64a
366	OUTSIDE	%r9,.Lsie_gmap,.Lsie_done,1f
367	SIEEXIT
368	lghi	%r10,_PIF_GUEST_FAULT
369#endif
3701:	tmhh	%r8,0x4000		# PER bit set in old PSW ?
371	jnz	2f			# -> enabled, can't be a double fault
372	tm	__LC_PGM_ILC+3,0x80	# check for per exception
373	jnz	.Lpgm_svcper		# -> single stepped svc
3742:	CHECK_STACK __LC_SAVE_AREA_SYNC
375	aghi	%r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
376	# CHECK_VMAP_STACK branches to stack_overflow or 4f
377	CHECK_VMAP_STACK __LC_SAVE_AREA_SYNC,4f
3783:	BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
379	lg	%r15,__LC_KERNEL_STACK
3804:	la	%r11,STACK_FRAME_OVERHEAD(%r15)
381	stg	%r10,__PT_FLAGS(%r11)
382	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
383	stmg	%r0,%r7,__PT_R0(%r11)
384	mvc	__PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
385	stmg	%r8,%r9,__PT_PSW(%r11)
386
387	# clear user controlled registers to prevent speculative use
388	xgr	%r0,%r0
389	xgr	%r1,%r1
390	xgr	%r3,%r3
391	xgr	%r4,%r4
392	xgr	%r5,%r5
393	xgr	%r6,%r6
394	xgr	%r7,%r7
395	lgr	%r2,%r11
396	brasl	%r14,__do_pgm_check
397	tmhh	%r8,0x0001		# returning to user space?
398	jno	.Lpgm_exit_kernel
399	lctlg	%c1,%c1,__LC_USER_ASCE
400	BPEXIT __TI_flags(%r12),_TIF_ISOLATE_BP
401	stpt	__LC_EXIT_TIMER
402.Lpgm_exit_kernel:
403	mvc	__LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
404	lmg	%r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
405	b	__LC_RETURN_LPSWE
406
407#
408# single stepped system call
409#
410.Lpgm_svcper:
411	mvc	__LC_RETURN_PSW(8),__LC_SVC_NEW_PSW
412	larl	%r14,.Lsysc_per
413	stg	%r14,__LC_RETURN_PSW+8
414	lghi	%r14,1
415	lpswe	__LC_RETURN_PSW		# branch to .Lsysc_per
416ENDPROC(pgm_check_handler)
417
418/*
419 * Interrupt handler macro used for external and IO interrupts.
420 */
421.macro INT_HANDLER name,lc_old_psw,handler
422ENTRY(\name)
423	STCK	__LC_INT_CLOCK
424	stpt	__LC_SYS_ENTER_TIMER
425	BPOFF
426	stmg	%r8,%r15,__LC_SAVE_AREA_ASYNC
427	lg	%r12,__LC_CURRENT
428	lmg	%r8,%r9,\lc_old_psw
429	tmhh	%r8,0x0001			# interrupting from user ?
430	jnz	1f
431#if IS_ENABLED(CONFIG_KVM)
432	OUTSIDE	%r9,.Lsie_gmap,.Lsie_done,0f
433	BPENTER	__SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
434	SIEEXIT
435#endif
4360:	CHECK_STACK __LC_SAVE_AREA_ASYNC
437	aghi	%r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
438	j	2f
4391:	BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
440	lctlg	%c1,%c1,__LC_KERNEL_ASCE
441	lg	%r15,__LC_KERNEL_STACK
4422:	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
443	la	%r11,STACK_FRAME_OVERHEAD(%r15)
444	stmg	%r0,%r7,__PT_R0(%r11)
445	# clear user controlled registers to prevent speculative use
446	xgr	%r0,%r0
447	xgr	%r1,%r1
448	xgr	%r3,%r3
449	xgr	%r4,%r4
450	xgr	%r5,%r5
451	xgr	%r6,%r6
452	xgr	%r7,%r7
453	xgr	%r10,%r10
454	xc	__PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
455	mvc	__PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC
456	stmg	%r8,%r9,__PT_PSW(%r11)
457	tm	%r8,0x0001		# coming from user space?
458	jno	1f
459	lctlg	%c1,%c1,__LC_KERNEL_ASCE
4601:	lgr	%r2,%r11		# pass pointer to pt_regs
461	brasl	%r14,\handler
462	mvc	__LC_RETURN_PSW(16),__PT_PSW(%r11)
463	tmhh	%r8,0x0001		# returning to user ?
464	jno	2f
465	lctlg	%c1,%c1,__LC_USER_ASCE
466	BPEXIT	__TI_flags(%r12),_TIF_ISOLATE_BP
467	stpt	__LC_EXIT_TIMER
4682:	lmg	%r0,%r15,__PT_R0(%r11)
469	b	__LC_RETURN_LPSWE
470ENDPROC(\name)
471.endm
472
473INT_HANDLER ext_int_handler,__LC_EXT_OLD_PSW,do_ext_irq
474INT_HANDLER io_int_handler,__LC_IO_OLD_PSW,do_io_irq
475
476/*
477 * Load idle PSW.
478 */
479ENTRY(psw_idle)
480	stg	%r14,(__SF_GPRS+8*8)(%r15)
481	stg	%r3,__SF_EMPTY(%r15)
482	larl	%r1,psw_idle_exit
483	stg	%r1,__SF_EMPTY+8(%r15)
484	larl	%r1,smp_cpu_mtid
485	llgf	%r1,0(%r1)
486	ltgr	%r1,%r1
487	jz	.Lpsw_idle_stcctm
488	.insn	rsy,0xeb0000000017,%r1,5,__MT_CYCLES_ENTER(%r2)
489.Lpsw_idle_stcctm:
490	oi	__LC_CPU_FLAGS+7,_CIF_ENABLED_WAIT
491	BPON
492	STCK	__CLOCK_IDLE_ENTER(%r2)
493	stpt	__TIMER_IDLE_ENTER(%r2)
494	lpswe	__SF_EMPTY(%r15)
495.globl psw_idle_exit
496psw_idle_exit:
497	BR_EX	%r14
498ENDPROC(psw_idle)
499
500/*
501 * Machine check handler routines
502 */
503ENTRY(mcck_int_handler)
504	STCK	__LC_MCCK_CLOCK
505	BPOFF
506	la	%r1,4095		# validate r1
507	spt	__LC_CPU_TIMER_SAVE_AREA-4095(%r1)	# validate cpu timer
508	lmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# validate gprs
509	lg	%r12,__LC_CURRENT
510	lmg	%r8,%r9,__LC_MCK_OLD_PSW
511	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_SYSTEM_DAMAGE
512	jo	.Lmcck_panic		# yes -> rest of mcck code invalid
513	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_CR_VALID
514	jno	.Lmcck_panic		# control registers invalid -> panic
515	la	%r14,4095
516	lctlg	%c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r14) # validate ctl regs
517	ptlb
518	lghi	%r14,__LC_CPU_TIMER_SAVE_AREA
519	mvc	__LC_MCCK_ENTER_TIMER(8),0(%r14)
520	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_CPU_TIMER_VALID
521	jo	3f
522	la	%r14,__LC_SYS_ENTER_TIMER
523	clc	0(8,%r14),__LC_EXIT_TIMER
524	jl	1f
525	la	%r14,__LC_EXIT_TIMER
5261:	clc	0(8,%r14),__LC_LAST_UPDATE_TIMER
527	jl	2f
528	la	%r14,__LC_LAST_UPDATE_TIMER
5292:	spt	0(%r14)
530	mvc	__LC_MCCK_ENTER_TIMER(8),0(%r14)
5313:	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_PSW_MWP_VALID
532	jno	.Lmcck_panic
533	tmhh	%r8,0x0001		# interrupting from user ?
534	jnz	6f
535	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_PSW_IA_VALID
536	jno	.Lmcck_panic
537#if IS_ENABLED(CONFIG_KVM)
538	OUTSIDE	%r9,.Lsie_gmap,.Lsie_done,6f
539	OUTSIDE	%r9,.Lsie_entry,.Lsie_skip,4f
540	oi	__LC_CPU_FLAGS+7, _CIF_MCCK_GUEST
541	j	5f
5424:	CHKSTG	.Lmcck_panic
5435:	larl	%r14,.Lstosm_tmp
544	stosm	0(%r14),0x04		# turn dat on, keep irqs off
545	BPENTER	__SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
546	SIEEXIT
547	j	.Lmcck_stack
548#endif
5496:	CHKSTG	.Lmcck_panic
550	larl	%r14,.Lstosm_tmp
551	stosm	0(%r14),0x04		# turn dat on, keep irqs off
552	tmhh	%r8,0x0001		# interrupting from user ?
553	jz	.Lmcck_stack
554	BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
555.Lmcck_stack:
556	lg	%r15,__LC_MCCK_STACK
557	la	%r11,STACK_FRAME_OVERHEAD(%r15)
558	stctg	%c1,%c1,__PT_CR1(%r11)
559	lctlg	%c1,%c1,__LC_KERNEL_ASCE
560	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
561	lghi	%r14,__LC_GPREGS_SAVE_AREA+64
562	stmg	%r0,%r7,__PT_R0(%r11)
563	# clear user controlled registers to prevent speculative use
564	xgr	%r0,%r0
565	xgr	%r1,%r1
566	xgr	%r3,%r3
567	xgr	%r4,%r4
568	xgr	%r5,%r5
569	xgr	%r6,%r6
570	xgr	%r7,%r7
571	xgr	%r10,%r10
572	mvc	__PT_R8(64,%r11),0(%r14)
573	stmg	%r8,%r9,__PT_PSW(%r11)
574	xc	__PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
575	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
576	lgr	%r2,%r11		# pass pointer to pt_regs
577	brasl	%r14,s390_do_machine_check
578	cghi	%r2,0
579	je	.Lmcck_return
580	lg	%r1,__LC_KERNEL_STACK	# switch to kernel stack
581	mvc	STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11)
582	xc	__SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1)
583	la	%r11,STACK_FRAME_OVERHEAD(%r1)
584	lgr	%r15,%r1
585	brasl	%r14,s390_handle_mcck
586.Lmcck_return:
587	lctlg	%c1,%c1,__PT_CR1(%r11)
588	lmg	%r0,%r10,__PT_R0(%r11)
589	mvc	__LC_RETURN_MCCK_PSW(16),__PT_PSW(%r11) # move return PSW
590	tm	__LC_RETURN_MCCK_PSW+1,0x01 # returning to user ?
591	jno	0f
592	BPEXIT	__TI_flags(%r12),_TIF_ISOLATE_BP
593	stpt	__LC_EXIT_TIMER
5940:	lmg	%r11,%r15,__PT_R11(%r11)
595	b	__LC_RETURN_MCCK_LPSWE
596
597.Lmcck_panic:
598	/*
599	 * Iterate over all possible CPU addresses in the range 0..0xffff
600	 * and stop each CPU using signal processor. Use compare and swap
601	 * to allow just one CPU-stopper and prevent concurrent CPUs from
602	 * stopping each other while leaving the others running.
603	 */
604	lhi	%r5,0
605	lhi	%r6,1
606	larl	%r7,.Lstop_lock
607	cs	%r5,%r6,0(%r7)		# single CPU-stopper only
608	jnz	4f
609	larl	%r7,.Lthis_cpu
610	stap	0(%r7)			# this CPU address
611	lh	%r4,0(%r7)
612	nilh	%r4,0
613	lhi	%r0,1
614	sll	%r0,16			# CPU counter
615	lhi	%r3,0			# next CPU address
6160:	cr	%r3,%r4
617	je	2f
6181:	sigp	%r1,%r3,SIGP_STOP	# stop next CPU
619	brc	SIGP_CC_BUSY,1b
6202:	ahi	%r3,1
621	brct	%r0,0b
6223:	sigp	%r1,%r4,SIGP_STOP	# stop this CPU
623	brc	SIGP_CC_BUSY,3b
6244:	j	4b
625ENDPROC(mcck_int_handler)
626
627ENTRY(restart_int_handler)
628	ALTERNATIVE "", ".insn s,0xb2800000,_LPP_OFFSET", 40
629	stg	%r15,__LC_SAVE_AREA_RESTART
630	TSTMSK	__LC_RESTART_FLAGS,RESTART_FLAG_CTLREGS,4
631	jz	0f
632	la	%r15,4095
633	lctlg	%c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r15)
6340:	larl	%r15,.Lstosm_tmp
635	stosm	0(%r15),0x04			# turn dat on, keep irqs off
636	lg	%r15,__LC_RESTART_STACK
637	xc	STACK_FRAME_OVERHEAD(__PT_SIZE,%r15),STACK_FRAME_OVERHEAD(%r15)
638	stmg	%r0,%r14,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
639	mvc	STACK_FRAME_OVERHEAD+__PT_R15(8,%r15),__LC_SAVE_AREA_RESTART
640	mvc	STACK_FRAME_OVERHEAD+__PT_PSW(16,%r15),__LC_RST_OLD_PSW
641	xc	0(STACK_FRAME_OVERHEAD,%r15),0(%r15)
642	lg	%r1,__LC_RESTART_FN		# load fn, parm & source cpu
643	lg	%r2,__LC_RESTART_DATA
644	lgf	%r3,__LC_RESTART_SOURCE
645	ltgr	%r3,%r3				# test source cpu address
646	jm	1f				# negative -> skip source stop
6470:	sigp	%r4,%r3,SIGP_SENSE		# sigp sense to source cpu
648	brc	10,0b				# wait for status stored
6491:	basr	%r14,%r1			# call function
650	stap	__SF_EMPTY(%r15)		# store cpu address
651	llgh	%r3,__SF_EMPTY(%r15)
6522:	sigp	%r4,%r3,SIGP_STOP		# sigp stop to current cpu
653	brc	2,2b
6543:	j	3b
655ENDPROC(restart_int_handler)
656
657	.section .kprobes.text, "ax"
658
659#if defined(CONFIG_CHECK_STACK) || defined(CONFIG_VMAP_STACK)
660/*
661 * The synchronous or the asynchronous stack overflowed. We are dead.
662 * No need to properly save the registers, we are going to panic anyway.
663 * Setup a pt_regs so that show_trace can provide a good call trace.
664 */
665ENTRY(stack_overflow)
666	lg	%r15,__LC_NODAT_STACK	# change to panic stack
667	la	%r11,STACK_FRAME_OVERHEAD(%r15)
668	stmg	%r0,%r7,__PT_R0(%r11)
669	stmg	%r8,%r9,__PT_PSW(%r11)
670	mvc	__PT_R8(64,%r11),0(%r14)
671	stg	%r10,__PT_ORIG_GPR2(%r11) # store last break to orig_gpr2
672	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
673	lgr	%r2,%r11		# pass pointer to pt_regs
674	jg	kernel_stack_overflow
675ENDPROC(stack_overflow)
676#endif
677
678	.section .data, "aw"
679		.align	4
680.Lstop_lock:	.long	0
681.Lthis_cpu:	.short	0
682.Lstosm_tmp:	.byte	0
683	.section .rodata, "a"
684#define SYSCALL(esame,emu)	.quad __s390x_ ## esame
685	.globl	sys_call_table
686sys_call_table:
687#include "asm/syscall_table.h"
688#undef SYSCALL
689
690#ifdef CONFIG_COMPAT
691
692#define SYSCALL(esame,emu)	.quad __s390_ ## emu
693	.globl	sys_call_table_emu
694sys_call_table_emu:
695#include "asm/syscall_table.h"
696#undef SYSCALL
697#endif
698