xref: /openbmc/linux/arch/s390/boot/head.S (revision 37744fee) 
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Copyright IBM Corp. 1999, 2010
4 *
5 *    Author(s): Hartmut Penner <hp@de.ibm.com>
6 *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
7 *		 Rob van der Heij <rvdhei@iae.nl>
8 *		 Heiko Carstens <heiko.carstens@de.ibm.com>
9 *
10 * There are 5 different IPL methods
11 *  1) load the image directly into ram at address 0 and do an PSW restart
12 *  2) linload will load the image from address 0x10000 to memory 0x10000
13 *     and start the code thru LPSW 0x0008000080010000 (VM only, deprecated)
14 *  3) generate the tape ipl header, store the generated image on a tape
15 *     and ipl from it
16 *     In case of SL tape you need to IPL 5 times to get past VOL1 etc
17 *  4) generate the vm reader ipl header, move the generated image to the
18 *     VM reader (use option NOH!) and do a ipl from reader (VM only)
19 *  5) direct call of start by the SALIPL loader
20 *  We use the cpuid to distinguish between VM and native ipl
21 *  params for kernel are pushed to 0x10400 (see setup.h)
22 *
23 */
24
25#include <linux/init.h>
26#include <linux/linkage.h>
27#include <asm/asm-offsets.h>
28#include <asm/thread_info.h>
29#include <asm/page.h>
30#include <asm/ptrace.h>
31
32#define ARCH_OFFSET	4
33
34__HEAD
35
36#define IPL_BS	0x730
37	.org	0
38	.long	0x00080000,0x80000000+iplstart	# The first 24 bytes are loaded
39	.long	0x02000018,0x60000050		# by ipl to addresses 0-23.
40	.long	0x02000068,0x60000050		# (a PSW and two CCWs).
41	.fill	80-24,1,0x40			# bytes 24-79 are discarded !!
42	.long	0x020000f0,0x60000050		# The next 160 byte are loaded
43	.long	0x02000140,0x60000050		# to addresses 0x18-0xb7
44	.long	0x02000190,0x60000050		# They form the continuation
45	.long	0x020001e0,0x60000050		# of the CCW program started
46	.long	0x02000230,0x60000050		# by ipl and load the range
47	.long	0x02000280,0x60000050		# 0x0f0-0x730 from the image
48	.long	0x020002d0,0x60000050		# to the range 0x0f0-0x730
49	.long	0x02000320,0x60000050		# in memory. At the end of
50	.long	0x02000370,0x60000050		# the channel program the PSW
51	.long	0x020003c0,0x60000050		# at location 0 is loaded.
52	.long	0x02000410,0x60000050		# Initial processing starts
53	.long	0x02000460,0x60000050		# at 0x200 = iplstart.
54	.long	0x020004b0,0x60000050
55	.long	0x02000500,0x60000050
56	.long	0x02000550,0x60000050
57	.long	0x020005a0,0x60000050
58	.long	0x020005f0,0x60000050
59	.long	0x02000640,0x60000050
60	.long	0x02000690,0x60000050
61	.long	0x020006e0,0x20000050
62
63	.org	__LC_RST_NEW_PSW		# 0x1a0
64	.quad	0,iplstart
65	.org	__LC_PGM_NEW_PSW		# 0x1d0
66	.quad	0x0000000180000000,startup_pgm_check_handler
67
68	.org	0x200
69
70#
71# subroutine to wait for end I/O
72#
73.Lirqwait:
74	mvc	__LC_IO_NEW_PSW(16),.Lnewpsw	# set up IO interrupt psw
75	lpsw	.Lwaitpsw
76.Lioint:
77	br	%r14
78	.align	8
79.Lnewpsw:
80	.quad	0x0000000080000000,.Lioint
81.Lwaitpsw:
82	.long	0x020a0000,0x80000000+.Lioint
83
84#
85# subroutine for loading cards from the reader
86#
87.Lloader:
88	la	%r4,0(%r14)
89	la	%r3,.Lorb		# r2 = address of orb into r2
90	la	%r5,.Lirb		# r4 = address of irb
91	la	%r6,.Lccws
92	la	%r7,20
93.Linit:
94	st	%r2,4(%r6)		# initialize CCW data addresses
95	la	%r2,0x50(%r2)
96	la	%r6,8(%r6)
97	bct	7,.Linit
98
99	lctl	%c6,%c6,.Lcr6		# set IO subclass mask
100	slr	%r2,%r2
101.Lldlp:
102	ssch	0(%r3)			# load chunk of 1600 bytes
103	bnz	.Llderr
104.Lwait4irq:
105	bas	%r14,.Lirqwait
106	c	%r1,__LC_SUBCHANNEL_ID	# compare subchannel number
107	bne	.Lwait4irq
108	tsch	0(%r5)
109
110	slr	%r0,%r0
111	ic	%r0,8(%r5)		# get device status
112	chi	%r0,8			# channel end ?
113	be	.Lcont
114	chi	%r0,12			# channel end + device end ?
115	be	.Lcont
116
117	l	%r0,4(%r5)
118	s	%r0,8(%r3)		# r0/8 = number of ccws executed
119	mhi	%r0,10			# *10 = number of bytes in ccws
120	lh	%r3,10(%r5)		# get residual count
121	sr	%r0,%r3 		# #ccws*80-residual=#bytes read
122	ar	%r2,%r0
123
124	br	%r4			# r2 contains the total size
125
126.Lcont:
127	ahi	%r2,0x640		# add 0x640 to total size
128	la	%r6,.Lccws
129	la	%r7,20
130.Lincr:
131	l	%r0,4(%r6)		# update CCW data addresses
132	ahi	%r0,0x640
133	st	%r0,4(%r6)
134	ahi	%r6,8
135	bct	7,.Lincr
136
137	b	.Lldlp
138.Llderr:
139	lpsw	.Lcrash
140
141	.align	8
142.Lorb:	.long	0x00000000,0x0080ff00,.Lccws
143.Lirb:	.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
144.Lcr6:	.long	0xff000000
145.Lloadp:.long	0,0
146	.align	8
147.Lcrash:.long	0x000a0000,0x00000000
148
149	.align	8
150.Lccws: .rept	19
151	.long	0x02600050,0x00000000
152	.endr
153	.long	0x02200050,0x00000000
154
155iplstart:
156	mvi	__LC_AR_MODE_ID,1	# set esame flag
157	slr	%r0,%r0			# set cpuid to zero
158	lhi	%r1,2			# mode 2 = esame (dump)
159	sigp	%r1,%r0,0x12		# switch to esame mode
160	bras	%r13,0f
161	.fill	16,4,0x0
1620:	lmh	%r0,%r15,0(%r13)	# clear high-order half of gprs
163	sam31				# switch to 31 bit addressing mode
164	lh	%r1,__LC_SUBCHANNEL_ID	# test if subchannel number
165	bct	%r1,.Lnoload		#  is valid
166	l	%r1,__LC_SUBCHANNEL_ID	# load ipl subchannel number
167	la	%r2,IPL_BS		# load start address
168	bas	%r14,.Lloader		# load rest of ipl image
169	l	%r12,.Lparm		# pointer to parameter area
170	st	%r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number
171
172#
173# load parameter file from ipl device
174#
175.Lagain1:
176	l	%r2,.Linitrd		# ramdisk loc. is temp
177	bas	%r14,.Lloader		# load parameter file
178	ltr	%r2,%r2 		# got anything ?
179	bz	.Lnopf
180	chi	%r2,895
181	bnh	.Lnotrunc
182	la	%r2,895
183.Lnotrunc:
184	l	%r4,.Linitrd
185	clc	0(3,%r4),.L_hdr		# if it is HDRx
186	bz	.Lagain1		# skip dataset header
187	clc	0(3,%r4),.L_eof		# if it is EOFx
188	bz	.Lagain1		# skip dateset trailer
189	la	%r5,0(%r4,%r2)
190	lr	%r3,%r2
191	la	%r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
192	mvc	0(256,%r3),0(%r4)
193	mvc	256(256,%r3),256(%r4)
194	mvc	512(256,%r3),512(%r4)
195	mvc	768(122,%r3),768(%r4)
196	slr	%r0,%r0
197	b	.Lcntlp
198.Ldelspc:
199	ic	%r0,0(%r2,%r3)
200	chi	%r0,0x20		# is it a space ?
201	be	.Lcntlp
202	ahi	%r2,1
203	b	.Leolp
204.Lcntlp:
205	brct	%r2,.Ldelspc
206.Leolp:
207	slr	%r0,%r0
208	stc	%r0,0(%r2,%r3)		# terminate buffer
209.Lnopf:
210
211#
212# load ramdisk from ipl device
213#
214.Lagain2:
215	l	%r2,.Linitrd		# addr of ramdisk
216	st	%r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
217	bas	%r14,.Lloader		# load ramdisk
218	st	%r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd
219	ltr	%r2,%r2
220	bnz	.Lrdcont
221	st	%r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found
222.Lrdcont:
223	l	%r2,.Linitrd
224
225	clc	0(3,%r2),.L_hdr		# skip HDRx and EOFx
226	bz	.Lagain2
227	clc	0(3,%r2),.L_eof
228	bz	.Lagain2
229
230#
231# reset files in VM reader
232#
233	stidp	.Lcpuid			# store cpuid
234	tm	.Lcpuid,0xff		# running VM ?
235	bno	.Lnoreset
236	la	%r2,.Lreset
237	lhi	%r3,26
238	diag	%r2,%r3,8
239	la	%r5,.Lirb
240	stsch	0(%r5)			# check if irq is pending
241	tm	30(%r5),0x0f		# by verifying if any of the
242	bnz	.Lwaitforirq		# activity or status control
243	tm	31(%r5),0xff		# bits is set in the schib
244	bz	.Lnoreset
245.Lwaitforirq:
246	bas	%r14,.Lirqwait		# wait for IO interrupt
247	c	%r1,__LC_SUBCHANNEL_ID	# compare subchannel number
248	bne	.Lwaitforirq
249	la	%r5,.Lirb
250	tsch	0(%r5)
251.Lnoreset:
252	b	.Lnoload
253
254#
255# everything loaded, go for it
256#
257.Lnoload:
258	l	%r1,.Lstartup
259	br	%r1
260
261.Linitrd:.long _end			# default address of initrd
262.Lparm:	.long  PARMAREA
263.Lstartup: .long startup
264.Lreset:.byte	0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
265	.byte	0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
266	.byte	0xc8,0xd6,0xd3,0xc4	# "change rdr all keep nohold"
267.L_eof: .long	0xc5d6c600	 /* C'EOF' */
268.L_hdr: .long	0xc8c4d900	 /* C'HDR' */
269	.align	8
270.Lcpuid:.fill	8,1,0
271
272#
273# startup-code at 0x10000, running in absolute addressing mode
274# this is called either by the ipl loader or directly by PSW restart
275# or linload or SALIPL
276#
277	.org	0x10000
278ENTRY(startup)
279	j	.Lep_startup_normal
280	.org	EP_OFFSET
281#
282# This is a list of s390 kernel entry points. At address 0x1000f the number of
283# valid entry points is stored.
284#
285# IMPORTANT: Do not change this table, it is s390 kernel ABI!
286#
287	.ascii	EP_STRING
288	.byte	0x00,0x01
289#
290# kdump startup-code at 0x10010, running in 64 bit absolute addressing mode
291#
292	.org	0x10010
293ENTRY(startup_kdump)
294	j	.Lep_startup_kdump
295.Lep_startup_normal:
296	mvi	__LC_AR_MODE_ID,1	# set esame flag
297	slr	%r0,%r0 		# set cpuid to zero
298	lhi	%r1,2			# mode 2 = esame (dump)
299	sigp	%r1,%r0,0x12		# switch to esame mode
300	bras	%r13,0f
301	.fill	16,4,0x0
3020:	lmh	%r0,%r15,0(%r13)	# clear high-order half of gprs
303	sam64				# switch to 64 bit addressing mode
304	basr	%r13,0			# get base
305.LPG0:
306	xc	0x200(256),0x200	# partially clear lowcore
307	xc	0x300(256),0x300
308	xc	0xe00(256),0xe00
309	xc	0xf00(256),0xf00
310	lctlg	%c0,%c15,.Lctl-.LPG0(%r13)	# load control registers
311	stcke	__LC_BOOT_CLOCK
312	mvc	__LC_LAST_UPDATE_CLOCK(8),__LC_BOOT_CLOCK+1
313	spt	6f-.LPG0(%r13)
314	mvc	__LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
315	l	%r15,.Lstack-.LPG0(%r13)
316	brasl	%r14,verify_facilities
317	brasl	%r14,startup_kernel
318
319.Lstack:
320	.long	0x8000 + (1<<(PAGE_SHIFT+BOOT_STACK_ORDER)) - STACK_FRAME_OVERHEAD
321	.align	8
3226:	.long	0x7fffffff,0xffffffff
323
324.Lctl:	.quad	0x04040000		# cr0: AFP registers & secondary space
325	.quad	0			# cr1: primary space segment table
326	.quad	.Lduct			# cr2: dispatchable unit control table
327	.quad	0			# cr3: instruction authorization
328	.quad	0xffff			# cr4: instruction authorization
329	.quad	.Lduct			# cr5: primary-aste origin
330	.quad	0			# cr6:	I/O interrupts
331	.quad	0			# cr7:	secondary space segment table
332	.quad	0x0000000000008000	# cr8:	access registers translation
333	.quad	0			# cr9:	tracing off
334	.quad	0			# cr10: tracing off
335	.quad	0			# cr11: tracing off
336	.quad	0			# cr12: tracing off
337	.quad	0			# cr13: home space segment table
338	.quad	0xc0000000		# cr14: machine check handling off
339	.quad	.Llinkage_stack		# cr15: linkage stack operations
340
341	.section .dma.data,"aw",@progbits
342.Lduct: .long	0,.Laste,.Laste,0,.Lduald,0,0,0
343	.long	0,0,0,0,0,0,0,0
344.Llinkage_stack:
345	.long	0,0,0x89000000,0,0,0,0x8a000000,0
346	.align 64
347.Laste:	.quad	0,0xffffffffffffffff,0,0,0,0,0,0
348	.align	128
349.Lduald:.rept	8
350	.long	0x80000000,0,0,0	# invalid access-list entries
351	.endr
352	.previous
353
354#include "head_kdump.S"
355
356#
357# This program check is active immediately after kernel start
358# and until early_pgm_check_handler is set in kernel/early.c
359# It simply saves general/control registers and psw in
360# the save area and does disabled wait with a faulty address.
361#
362ENTRY(startup_pgm_check_handler)
363	stmg	%r0,%r15,__LC_SAVE_AREA_SYNC
364	la	%r1,4095
365	stctg	%c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r1)
366	mvc	__LC_GPREGS_SAVE_AREA-4095(128,%r1),__LC_SAVE_AREA_SYNC
367	mvc	__LC_PSW_SAVE_AREA-4095(16,%r1),__LC_PGM_OLD_PSW
368	mvc	__LC_RETURN_PSW(16),__LC_PGM_OLD_PSW
369	ni	__LC_RETURN_PSW,0xfc	# remove IO and EX bits
370	ni	__LC_RETURN_PSW+1,0xfb	# remove MCHK bit
371	oi	__LC_RETURN_PSW+1,0x2	# set wait state bit
372	larl	%r2,.Lold_psw_disabled_wait
373	stg	%r2,__LC_PGM_NEW_PSW+8
374	l	%r15,.Ldump_info_stack-.Lold_psw_disabled_wait(%r2)
375	brasl	%r14,print_pgm_check_info
376.Lold_psw_disabled_wait:
377	la	%r1,4095
378	lmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
379	lpswe	__LC_RETURN_PSW		# disabled wait
380.Ldump_info_stack:
381	.long	0x5000 + PAGE_SIZE - STACK_FRAME_OVERHEAD
382ENDPROC(startup_pgm_check_handler)
383
384#
385# params at 10400 (setup.h)
386# Must be keept in sync with struct parmarea in setup.h
387#
388	.org	PARMAREA
389	.quad	0			# IPL_DEVICE
390	.quad	0			# INITRD_START
391	.quad	0			# INITRD_SIZE
392	.quad	0			# OLDMEM_BASE
393	.quad	0			# OLDMEM_SIZE
394	.quad	kernel_version		# points to kernel version string
395
396	.org	COMMAND_LINE
397	.byte	"root=/dev/ram0 ro"
398	.byte	0
399
400	.org	EARLY_SCCB_OFFSET
401	.fill	4096
402
403	.org	HEAD_END
404