xref: /openbmc/linux/arch/riscv/mm/cacheflush.c (revision be2b81b5)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2017 SiFive
4  */
5 
6 #include <linux/of.h>
7 #include <asm/cacheflush.h>
8 
9 #ifdef CONFIG_SMP
10 
11 #include <asm/sbi.h>
12 
13 static void ipi_remote_fence_i(void *info)
14 {
15 	return local_flush_icache_all();
16 }
17 
18 void flush_icache_all(void)
19 {
20 	local_flush_icache_all();
21 
22 	if (IS_ENABLED(CONFIG_RISCV_SBI))
23 		sbi_remote_fence_i(NULL);
24 	else
25 		on_each_cpu(ipi_remote_fence_i, NULL, 1);
26 }
27 EXPORT_SYMBOL(flush_icache_all);
28 
29 /*
30  * Performs an icache flush for the given MM context.  RISC-V has no direct
31  * mechanism for instruction cache shoot downs, so instead we send an IPI that
32  * informs the remote harts they need to flush their local instruction caches.
33  * To avoid pathologically slow behavior in a common case (a bunch of
34  * single-hart processes on a many-hart machine, ie 'make -j') we avoid the
35  * IPIs for harts that are not currently executing a MM context and instead
36  * schedule a deferred local instruction cache flush to be performed before
37  * execution resumes on each hart.
38  */
39 void flush_icache_mm(struct mm_struct *mm, bool local)
40 {
41 	unsigned int cpu;
42 	cpumask_t others, *mask;
43 
44 	preempt_disable();
45 
46 	/* Mark every hart's icache as needing a flush for this MM. */
47 	mask = &mm->context.icache_stale_mask;
48 	cpumask_setall(mask);
49 	/* Flush this hart's I$ now, and mark it as flushed. */
50 	cpu = smp_processor_id();
51 	cpumask_clear_cpu(cpu, mask);
52 	local_flush_icache_all();
53 
54 	/*
55 	 * Flush the I$ of other harts concurrently executing, and mark them as
56 	 * flushed.
57 	 */
58 	cpumask_andnot(&others, mm_cpumask(mm), cpumask_of(cpu));
59 	local |= cpumask_empty(&others);
60 	if (mm == current->active_mm && local) {
61 		/*
62 		 * It's assumed that at least one strongly ordered operation is
63 		 * performed on this hart between setting a hart's cpumask bit
64 		 * and scheduling this MM context on that hart.  Sending an SBI
65 		 * remote message will do this, but in the case where no
66 		 * messages are sent we still need to order this hart's writes
67 		 * with flush_icache_deferred().
68 		 */
69 		smp_mb();
70 	} else if (IS_ENABLED(CONFIG_RISCV_SBI)) {
71 		sbi_remote_fence_i(&others);
72 	} else {
73 		on_each_cpu_mask(&others, ipi_remote_fence_i, NULL, 1);
74 	}
75 
76 	preempt_enable();
77 }
78 
79 #endif /* CONFIG_SMP */
80 
81 #ifdef CONFIG_MMU
82 void flush_icache_pte(pte_t pte)
83 {
84 	struct page *page = pte_page(pte);
85 
86 	/*
87 	 * HugeTLB pages are always fully mapped, so only setting head page's
88 	 * PG_dcache_clean flag is enough.
89 	 */
90 	if (PageHuge(page))
91 		page = compound_head(page);
92 
93 	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
94 		flush_icache_all();
95 }
96 #endif /* CONFIG_MMU */
97 
98 unsigned int riscv_cbom_block_size;
99 EXPORT_SYMBOL_GPL(riscv_cbom_block_size);
100 
101 void riscv_init_cbom_blocksize(void)
102 {
103 	struct device_node *node;
104 	unsigned long cbom_hartid;
105 	u32 val, probed_block_size;
106 	int ret;
107 
108 	probed_block_size = 0;
109 	for_each_of_cpu_node(node) {
110 		unsigned long hartid;
111 
112 		ret = riscv_of_processor_hartid(node, &hartid);
113 		if (ret)
114 			continue;
115 
116 		/* set block-size for cbom extension if available */
117 		ret = of_property_read_u32(node, "riscv,cbom-block-size", &val);
118 		if (ret)
119 			continue;
120 
121 		if (!probed_block_size) {
122 			probed_block_size = val;
123 			cbom_hartid = hartid;
124 		} else {
125 			if (probed_block_size != val)
126 				pr_warn("cbom-block-size mismatched between harts %lu and %lu\n",
127 					cbom_hartid, hartid);
128 		}
129 	}
130 
131 	if (probed_block_size)
132 		riscv_cbom_block_size = probed_block_size;
133 }
134