1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * tsi108/109 device setup code 4 * 5 * Maintained by Roy Zang < tie-fei.zang@freescale.com > 6 */ 7 8 #include <linux/stddef.h> 9 #include <linux/kernel.h> 10 #include <linux/init.h> 11 #include <linux/errno.h> 12 #include <linux/major.h> 13 #include <linux/delay.h> 14 #include <linux/irq.h> 15 #include <linux/export.h> 16 #include <linux/device.h> 17 #include <linux/etherdevice.h> 18 #include <linux/platform_device.h> 19 #include <linux/of_address.h> 20 #include <linux/of_irq.h> 21 #include <linux/of_net.h> 22 #include <asm/tsi108.h> 23 24 #include <linux/atomic.h> 25 #include <asm/io.h> 26 #include <asm/irq.h> 27 #include <mm/mmu_decl.h> 28 29 #undef DEBUG 30 31 #ifdef DEBUG 32 #define DBG(fmt...) do { printk(fmt); } while(0) 33 #else 34 #define DBG(fmt...) do { } while(0) 35 #endif 36 37 static phys_addr_t tsi108_csr_base = -1; 38 39 phys_addr_t get_csrbase(void) 40 { 41 struct device_node *tsi; 42 43 if (tsi108_csr_base != -1) 44 return tsi108_csr_base; 45 46 tsi = of_find_node_by_type(NULL, "tsi-bridge"); 47 if (tsi) { 48 unsigned int size; 49 const void *prop = of_get_property(tsi, "reg", &size); 50 tsi108_csr_base = of_translate_address(tsi, prop); 51 of_node_put(tsi); 52 } 53 return tsi108_csr_base; 54 } 55 EXPORT_SYMBOL(get_csrbase); 56 57 u32 get_vir_csrbase(void) 58 { 59 return (u32) (ioremap(get_csrbase(), 0x10000)); 60 } 61 EXPORT_SYMBOL(get_vir_csrbase); 62 63 static int __init tsi108_eth_of_init(void) 64 { 65 struct device_node *np; 66 unsigned int i = 0; 67 struct platform_device *tsi_eth_dev; 68 struct resource res; 69 int ret; 70 71 for_each_compatible_node(np, "network", "tsi108-ethernet") { 72 struct resource r[2]; 73 struct device_node *phy, *mdio; 74 hw_info tsi_eth_data; 75 const unsigned int *phy_id; 76 const phandle *ph; 77 78 memset(r, 0, sizeof(r)); 79 memset(&tsi_eth_data, 0, sizeof(tsi_eth_data)); 80 81 ret = of_address_to_resource(np, 0, &r[0]); 82 DBG("%s: name:start->end = %s:%pR\n", 83 __func__, r[0].name, &r[0]); 84 if (ret) 85 goto err; 86 87 r[1].name = "tx"; 88 r[1].start = irq_of_parse_and_map(np, 0); 89 r[1].end = irq_of_parse_and_map(np, 0); 90 r[1].flags = IORESOURCE_IRQ; 91 DBG("%s: name:start->end = %s:%pR\n", 92 __func__, r[1].name, &r[1]); 93 94 tsi_eth_dev = 95 platform_device_register_simple("tsi-ethernet", i++, &r[0], 96 1); 97 98 if (IS_ERR(tsi_eth_dev)) { 99 ret = PTR_ERR(tsi_eth_dev); 100 goto err; 101 } 102 103 of_get_mac_address(np, tsi_eth_data.mac_addr); 104 105 ph = of_get_property(np, "mdio-handle", NULL); 106 mdio = of_find_node_by_phandle(*ph); 107 ret = of_address_to_resource(mdio, 0, &res); 108 of_node_put(mdio); 109 if (ret) 110 goto unreg; 111 112 ph = of_get_property(np, "phy-handle", NULL); 113 phy = of_find_node_by_phandle(*ph); 114 115 if (phy == NULL) { 116 ret = -ENODEV; 117 goto unreg; 118 } 119 120 phy_id = of_get_property(phy, "reg", NULL); 121 122 tsi_eth_data.regs = r[0].start; 123 tsi_eth_data.phyregs = res.start; 124 tsi_eth_data.phy = *phy_id; 125 tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0); 126 127 /* Some boards with the TSI108 bridge (e.g. Holly) 128 * have a miswiring of the ethernet PHYs which 129 * requires a workaround. The special 130 * "txc-rxc-delay-disable" property enables this 131 * workaround. FIXME: Need to port the tsi108_eth 132 * driver itself to phylib and use a non-misleading 133 * name for the workaround flag - it's not actually to 134 * do with the model of PHY in use */ 135 if (of_get_property(phy, "txc-rxc-delay-disable", NULL)) 136 tsi_eth_data.phy_type = TSI108_PHY_BCM54XX; 137 of_node_put(phy); 138 139 ret = 140 platform_device_add_data(tsi_eth_dev, &tsi_eth_data, 141 sizeof(hw_info)); 142 if (ret) 143 goto unreg; 144 } 145 return 0; 146 unreg: 147 platform_device_unregister(tsi_eth_dev); 148 err: 149 of_node_put(np); 150 return ret; 151 } 152 153 arch_initcall(tsi108_eth_of_init); 154