xref: /openbmc/linux/arch/powerpc/sysdev/tsi108_dev.c (revision 95e9fd10)
1 /*
2  * tsi108/109 device setup code
3  *
4  * Maintained by Roy Zang < tie-fei.zang@freescale.com >
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  */
11 
12 #include <linux/stddef.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/errno.h>
16 #include <linux/major.h>
17 #include <linux/delay.h>
18 #include <linux/irq.h>
19 #include <linux/export.h>
20 #include <linux/device.h>
21 #include <linux/platform_device.h>
22 #include <linux/of_net.h>
23 #include <asm/tsi108.h>
24 
25 #include <linux/atomic.h>
26 #include <asm/io.h>
27 #include <asm/irq.h>
28 #include <asm/prom.h>
29 #include <mm/mmu_decl.h>
30 
31 #undef DEBUG
32 
33 #ifdef DEBUG
34 #define DBG(fmt...) do { printk(fmt); } while(0)
35 #else
36 #define DBG(fmt...) do { } while(0)
37 #endif
38 
39 static phys_addr_t tsi108_csr_base = -1;
40 
41 phys_addr_t get_csrbase(void)
42 {
43 	struct device_node *tsi;
44 
45 	if (tsi108_csr_base != -1)
46 		return tsi108_csr_base;
47 
48 	tsi = of_find_node_by_type(NULL, "tsi-bridge");
49 	if (tsi) {
50 		unsigned int size;
51 		const void *prop = of_get_property(tsi, "reg", &size);
52 		tsi108_csr_base = of_translate_address(tsi, prop);
53 		of_node_put(tsi);
54 	};
55 	return tsi108_csr_base;
56 }
57 
58 u32 get_vir_csrbase(void)
59 {
60 	return (u32) (ioremap(get_csrbase(), 0x10000));
61 }
62 
63 EXPORT_SYMBOL(get_csrbase);
64 EXPORT_SYMBOL(get_vir_csrbase);
65 
66 static int __init tsi108_eth_of_init(void)
67 {
68 	struct device_node *np;
69 	unsigned int i = 0;
70 	struct platform_device *tsi_eth_dev;
71 	struct resource res;
72 	int ret;
73 
74 	for_each_compatible_node(np, "network", "tsi108-ethernet") {
75 		struct resource r[2];
76 		struct device_node *phy, *mdio;
77 		hw_info tsi_eth_data;
78 		const unsigned int *phy_id;
79 		const void *mac_addr;
80 		const phandle *ph;
81 
82 		memset(r, 0, sizeof(r));
83 		memset(&tsi_eth_data, 0, sizeof(tsi_eth_data));
84 
85 		ret = of_address_to_resource(np, 0, &r[0]);
86 		DBG("%s: name:start->end = %s:%pR\n",
87 		    __func__, r[0].name, &r[0]);
88 		if (ret)
89 			goto err;
90 
91 		r[1].name = "tx";
92 		r[1].start = irq_of_parse_and_map(np, 0);
93 		r[1].end = irq_of_parse_and_map(np, 0);
94 		r[1].flags = IORESOURCE_IRQ;
95 		DBG("%s: name:start->end = %s:%pR\n",
96 			__func__, r[1].name, &r[1]);
97 
98 		tsi_eth_dev =
99 		    platform_device_register_simple("tsi-ethernet", i++, &r[0],
100 						    1);
101 
102 		if (IS_ERR(tsi_eth_dev)) {
103 			ret = PTR_ERR(tsi_eth_dev);
104 			goto err;
105 		}
106 
107 		mac_addr = of_get_mac_address(np);
108 		if (mac_addr)
109 			memcpy(tsi_eth_data.mac_addr, mac_addr, 6);
110 
111 		ph = of_get_property(np, "mdio-handle", NULL);
112 		mdio = of_find_node_by_phandle(*ph);
113 		ret = of_address_to_resource(mdio, 0, &res);
114 		of_node_put(mdio);
115 		if (ret)
116 			goto unreg;
117 
118 		ph = of_get_property(np, "phy-handle", NULL);
119 		phy = of_find_node_by_phandle(*ph);
120 
121 		if (phy == NULL) {
122 			ret = -ENODEV;
123 			goto unreg;
124 		}
125 
126 		phy_id = of_get_property(phy, "reg", NULL);
127 
128 		tsi_eth_data.regs = r[0].start;
129 		tsi_eth_data.phyregs = res.start;
130 		tsi_eth_data.phy = *phy_id;
131 		tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0);
132 
133 		/* Some boards with the TSI108 bridge (e.g. Holly)
134 		 * have a miswiring of the ethernet PHYs which
135 		 * requires a workaround.  The special
136 		 * "txc-rxc-delay-disable" property enables this
137 		 * workaround.  FIXME: Need to port the tsi108_eth
138 		 * driver itself to phylib and use a non-misleading
139 		 * name for the workaround flag - it's not actually to
140 		 * do with the model of PHY in use */
141 		if (of_get_property(phy, "txc-rxc-delay-disable", NULL))
142 			tsi_eth_data.phy_type = TSI108_PHY_BCM54XX;
143 		of_node_put(phy);
144 
145 		ret =
146 		    platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
147 					     sizeof(hw_info));
148 		if (ret)
149 			goto unreg;
150 	}
151 	return 0;
152 unreg:
153 	platform_device_unregister(tsi_eth_dev);
154 err:
155 	of_node_put(np);
156 	return ret;
157 }
158 
159 arch_initcall(tsi108_eth_of_init);
160