1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Freescale MPC85xx/MPC86xx RapidIO support 4 * 5 * Copyright 2009 Sysgo AG 6 * Thomas Moll <thomas.moll@sysgo.com> 7 * - fixed maintenance access routines, check for aligned access 8 * 9 * Copyright 2009 Integrated Device Technology, Inc. 10 * Alex Bounine <alexandre.bounine@idt.com> 11 * - Added Port-Write message handling 12 * - Added Machine Check exception handling 13 * 14 * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc. 15 * Zhang Wei <wei.zhang@freescale.com> 16 * 17 * Copyright 2005 MontaVista Software, Inc. 18 * Matt Porter <mporter@kernel.crashing.org> 19 */ 20 21 #include <linux/init.h> 22 #include <linux/extable.h> 23 #include <linux/types.h> 24 #include <linux/dma-mapping.h> 25 #include <linux/interrupt.h> 26 #include <linux/device.h> 27 #include <linux/of_address.h> 28 #include <linux/of_irq.h> 29 #include <linux/of_platform.h> 30 #include <linux/delay.h> 31 #include <linux/slab.h> 32 33 #include <linux/io.h> 34 #include <linux/uaccess.h> 35 #include <asm/machdep.h> 36 37 #include "fsl_rio.h" 38 39 #undef DEBUG_PW /* Port-Write debugging */ 40 41 #define RIO_PORT1_EDCSR 0x0640 42 #define RIO_PORT2_EDCSR 0x0680 43 #define RIO_PORT1_IECSR 0x10130 44 #define RIO_PORT2_IECSR 0x101B0 45 46 #define RIO_GCCSR 0x13c 47 #define RIO_ESCSR 0x158 48 #define ESCSR_CLEAR 0x07120204 49 #define RIO_PORT2_ESCSR 0x178 50 #define RIO_CCSR 0x15c 51 #define RIO_LTLEDCSR_IER 0x80000000 52 #define RIO_LTLEDCSR_PRT 0x01000000 53 #define IECSR_CLEAR 0x80000000 54 #define RIO_ISR_AACR 0x10120 55 #define RIO_ISR_AACR_AA 0x1 /* Accept All ID */ 56 57 #define RIWTAR_TRAD_VAL_SHIFT 12 58 #define RIWTAR_TRAD_MASK 0x00FFFFFF 59 #define RIWBAR_BADD_VAL_SHIFT 12 60 #define RIWBAR_BADD_MASK 0x003FFFFF 61 #define RIWAR_ENABLE 0x80000000 62 #define RIWAR_TGINT_LOCAL 0x00F00000 63 #define RIWAR_RDTYP_NO_SNOOP 0x00040000 64 #define RIWAR_RDTYP_SNOOP 0x00050000 65 #define RIWAR_WRTYP_NO_SNOOP 0x00004000 66 #define RIWAR_WRTYP_SNOOP 0x00005000 67 #define RIWAR_WRTYP_ALLOC 0x00006000 68 #define RIWAR_SIZE_MASK 0x0000003F 69 70 static DEFINE_SPINLOCK(fsl_rio_config_lock); 71 72 #define ___fsl_read_rio_config(x, addr, err, op, barrier) \ 73 __asm__ __volatile__( \ 74 "1: "op" %1,0(%2)\n" \ 75 " "barrier"\n" \ 76 "2:\n" \ 77 ".section .fixup,\"ax\"\n" \ 78 "3: li %1,-1\n" \ 79 " li %0,%3\n" \ 80 " b 2b\n" \ 81 ".previous\n" \ 82 EX_TABLE(1b, 3b) \ 83 : "=r" (err), "=r" (x) \ 84 : "b" (addr), "i" (-EFAULT), "0" (err)) 85 86 #ifdef CONFIG_BOOKE 87 #define __fsl_read_rio_config(x, addr, err, op) \ 88 ___fsl_read_rio_config(x, addr, err, op, "mbar") 89 #else 90 #define __fsl_read_rio_config(x, addr, err, op) \ 91 ___fsl_read_rio_config(x, addr, err, op, "eieio") 92 #endif 93 94 void __iomem *rio_regs_win; 95 void __iomem *rmu_regs_win; 96 resource_size_t rio_law_start; 97 98 struct fsl_rio_dbell *dbell; 99 struct fsl_rio_pw *pw; 100 101 #ifdef CONFIG_PPC_E500 102 int fsl_rio_mcheck_exception(struct pt_regs *regs) 103 { 104 const struct exception_table_entry *entry; 105 unsigned long reason; 106 107 if (!rio_regs_win) 108 return 0; 109 110 reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR)); 111 if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) { 112 /* Check if we are prepared to handle this fault */ 113 entry = search_exception_tables(regs->nip); 114 if (entry) { 115 pr_debug("RIO: %s - MC Exception handled\n", 116 __func__); 117 out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 118 0); 119 regs_set_recoverable(regs); 120 regs_set_return_ip(regs, extable_fixup(entry)); 121 return 1; 122 } 123 } 124 125 return 0; 126 } 127 EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception); 128 #endif 129 130 /** 131 * fsl_local_config_read - Generate a MPC85xx local config space read 132 * @mport: RapidIO master port info 133 * @index: ID of RapdiIO interface 134 * @offset: Offset into configuration space 135 * @len: Length (in bytes) of the maintenance transaction 136 * @data: Value to be read into 137 * 138 * Generates a MPC85xx local configuration space read. Returns %0 on 139 * success or %-EINVAL on failure. 140 */ 141 static int fsl_local_config_read(struct rio_mport *mport, 142 int index, u32 offset, int len, u32 *data) 143 { 144 struct rio_priv *priv = mport->priv; 145 pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index, 146 offset); 147 *data = in_be32(priv->regs_win + offset); 148 149 return 0; 150 } 151 152 /** 153 * fsl_local_config_write - Generate a MPC85xx local config space write 154 * @mport: RapidIO master port info 155 * @index: ID of RapdiIO interface 156 * @offset: Offset into configuration space 157 * @len: Length (in bytes) of the maintenance transaction 158 * @data: Value to be written 159 * 160 * Generates a MPC85xx local configuration space write. Returns %0 on 161 * success or %-EINVAL on failure. 162 */ 163 static int fsl_local_config_write(struct rio_mport *mport, 164 int index, u32 offset, int len, u32 data) 165 { 166 struct rio_priv *priv = mport->priv; 167 pr_debug 168 ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n", 169 index, offset, data); 170 out_be32(priv->regs_win + offset, data); 171 172 return 0; 173 } 174 175 /** 176 * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction 177 * @mport: RapidIO master port info 178 * @index: ID of RapdiIO interface 179 * @destid: Destination ID of transaction 180 * @hopcount: Number of hops to target device 181 * @offset: Offset into configuration space 182 * @len: Length (in bytes) of the maintenance transaction 183 * @val: Location to be read into 184 * 185 * Generates a MPC85xx read maintenance transaction. Returns %0 on 186 * success or %-EINVAL on failure. 187 */ 188 static int 189 fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid, 190 u8 hopcount, u32 offset, int len, u32 *val) 191 { 192 struct rio_priv *priv = mport->priv; 193 unsigned long flags; 194 u8 *data; 195 u32 rval, err = 0; 196 197 pr_debug 198 ("fsl_rio_config_read:" 199 " index %d destid %d hopcount %d offset %8.8x len %d\n", 200 index, destid, hopcount, offset, len); 201 202 /* 16MB maintenance window possible */ 203 /* allow only aligned access to maintenance registers */ 204 if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len)) 205 return -EINVAL; 206 207 spin_lock_irqsave(&fsl_rio_config_lock, flags); 208 209 out_be32(&priv->maint_atmu_regs->rowtar, 210 (destid << 22) | (hopcount << 12) | (offset >> 12)); 211 out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); 212 213 data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); 214 switch (len) { 215 case 1: 216 __fsl_read_rio_config(rval, data, err, "lbz"); 217 break; 218 case 2: 219 __fsl_read_rio_config(rval, data, err, "lhz"); 220 break; 221 case 4: 222 __fsl_read_rio_config(rval, data, err, "lwz"); 223 break; 224 default: 225 spin_unlock_irqrestore(&fsl_rio_config_lock, flags); 226 return -EINVAL; 227 } 228 229 if (err) { 230 pr_debug("RIO: cfg_read error %d for %x:%x:%x\n", 231 err, destid, hopcount, offset); 232 } 233 234 spin_unlock_irqrestore(&fsl_rio_config_lock, flags); 235 *val = rval; 236 237 return err; 238 } 239 240 /** 241 * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction 242 * @mport: RapidIO master port info 243 * @index: ID of RapdiIO interface 244 * @destid: Destination ID of transaction 245 * @hopcount: Number of hops to target device 246 * @offset: Offset into configuration space 247 * @len: Length (in bytes) of the maintenance transaction 248 * @val: Value to be written 249 * 250 * Generates an MPC85xx write maintenance transaction. Returns %0 on 251 * success or %-EINVAL on failure. 252 */ 253 static int 254 fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, 255 u8 hopcount, u32 offset, int len, u32 val) 256 { 257 struct rio_priv *priv = mport->priv; 258 unsigned long flags; 259 u8 *data; 260 int ret = 0; 261 262 pr_debug 263 ("fsl_rio_config_write:" 264 " index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", 265 index, destid, hopcount, offset, len, val); 266 267 /* 16MB maintenance windows possible */ 268 /* allow only aligned access to maintenance registers */ 269 if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len)) 270 return -EINVAL; 271 272 spin_lock_irqsave(&fsl_rio_config_lock, flags); 273 274 out_be32(&priv->maint_atmu_regs->rowtar, 275 (destid << 22) | (hopcount << 12) | (offset >> 12)); 276 out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); 277 278 data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); 279 switch (len) { 280 case 1: 281 out_8((u8 *) data, val); 282 break; 283 case 2: 284 out_be16((u16 *) data, val); 285 break; 286 case 4: 287 out_be32((u32 *) data, val); 288 break; 289 default: 290 ret = -EINVAL; 291 } 292 spin_unlock_irqrestore(&fsl_rio_config_lock, flags); 293 294 return ret; 295 } 296 297 static void fsl_rio_inbound_mem_init(struct rio_priv *priv) 298 { 299 int i; 300 301 /* close inbound windows */ 302 for (i = 0; i < RIO_INB_ATMU_COUNT; i++) 303 out_be32(&priv->inb_atmu_regs[i].riwar, 0); 304 } 305 306 int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, 307 u64 rstart, u64 size, u32 flags) 308 { 309 struct rio_priv *priv = mport->priv; 310 u32 base_size; 311 unsigned int base_size_log; 312 u64 win_start, win_end; 313 u32 riwar; 314 int i; 315 316 if ((size & (size - 1)) != 0 || size > 0x400000000ULL) 317 return -EINVAL; 318 319 base_size_log = ilog2(size); 320 base_size = 1 << base_size_log; 321 322 /* check if addresses are aligned with the window size */ 323 if (lstart & (base_size - 1)) 324 return -EINVAL; 325 if (rstart & (base_size - 1)) 326 return -EINVAL; 327 328 /* check for conflicting ranges */ 329 for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { 330 riwar = in_be32(&priv->inb_atmu_regs[i].riwar); 331 if ((riwar & RIWAR_ENABLE) == 0) 332 continue; 333 win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK)) 334 << RIWBAR_BADD_VAL_SHIFT; 335 win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1); 336 if (rstart < win_end && (rstart + size) > win_start) 337 return -EINVAL; 338 } 339 340 /* find unused atmu */ 341 for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { 342 riwar = in_be32(&priv->inb_atmu_regs[i].riwar); 343 if ((riwar & RIWAR_ENABLE) == 0) 344 break; 345 } 346 if (i >= RIO_INB_ATMU_COUNT) 347 return -ENOMEM; 348 349 out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT); 350 out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT); 351 out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL | 352 RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1)); 353 354 return 0; 355 } 356 357 void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart) 358 { 359 u32 win_start_shift, base_start_shift; 360 struct rio_priv *priv = mport->priv; 361 u32 riwar, riwtar; 362 int i; 363 364 /* skip default window */ 365 base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT; 366 for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { 367 riwar = in_be32(&priv->inb_atmu_regs[i].riwar); 368 if ((riwar & RIWAR_ENABLE) == 0) 369 continue; 370 371 riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar); 372 win_start_shift = riwtar & RIWTAR_TRAD_MASK; 373 if (win_start_shift == base_start_shift) { 374 out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE); 375 return; 376 } 377 } 378 } 379 380 void fsl_rio_port_error_handler(int offset) 381 { 382 /*XXX: Error recovery is not implemented, we just clear errors */ 383 out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); 384 385 if (offset == 0) { 386 out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0); 387 out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR); 388 out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR); 389 } else { 390 out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0); 391 out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR); 392 out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR); 393 } 394 } 395 static inline void fsl_rio_info(struct device *dev, u32 ccsr) 396 { 397 const char *str; 398 if (ccsr & 1) { 399 /* Serial phy */ 400 switch (ccsr >> 30) { 401 case 0: 402 str = "1"; 403 break; 404 case 1: 405 str = "4"; 406 break; 407 default: 408 str = "Unknown"; 409 break; 410 } 411 dev_info(dev, "Hardware port width: %s\n", str); 412 413 switch ((ccsr >> 27) & 7) { 414 case 0: 415 str = "Single-lane 0"; 416 break; 417 case 1: 418 str = "Single-lane 2"; 419 break; 420 case 2: 421 str = "Four-lane"; 422 break; 423 default: 424 str = "Unknown"; 425 break; 426 } 427 dev_info(dev, "Training connection status: %s\n", str); 428 } else { 429 /* Parallel phy */ 430 if (!(ccsr & 0x80000000)) 431 dev_info(dev, "Output port operating in 8-bit mode\n"); 432 if (!(ccsr & 0x08000000)) 433 dev_info(dev, "Input port operating in 8-bit mode\n"); 434 } 435 } 436 437 /** 438 * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface 439 * @dev: platform_device pointer 440 * 441 * Initializes MPC85xx RapidIO hardware interface, configures 442 * master port with system-specific info, and registers the 443 * master port with the RapidIO subsystem. 444 */ 445 int fsl_rio_setup(struct platform_device *dev) 446 { 447 struct rio_ops *ops; 448 struct rio_mport *port; 449 struct rio_priv *priv; 450 int rc = 0; 451 const u32 *dt_range, *cell, *port_index; 452 u32 active_ports = 0; 453 struct resource regs, rmu_regs; 454 struct device_node *np, *rmu_node; 455 int rlen; 456 u32 ccsr; 457 u64 range_start, range_size; 458 int paw, aw, sw; 459 u32 i; 460 static int tmp; 461 struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL}; 462 463 if (!dev->dev.of_node) { 464 dev_err(&dev->dev, "Device OF-Node is NULL"); 465 return -ENODEV; 466 } 467 468 rc = of_address_to_resource(dev->dev.of_node, 0, ®s); 469 if (rc) { 470 dev_err(&dev->dev, "Can't get %pOF property 'reg'\n", 471 dev->dev.of_node); 472 return -EFAULT; 473 } 474 dev_info(&dev->dev, "Of-device full name %pOF\n", 475 dev->dev.of_node); 476 dev_info(&dev->dev, "Regs: %pR\n", ®s); 477 478 rio_regs_win = ioremap(regs.start, resource_size(®s)); 479 if (!rio_regs_win) { 480 dev_err(&dev->dev, "Unable to map rio register window\n"); 481 rc = -ENOMEM; 482 goto err_rio_regs; 483 } 484 485 ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL); 486 if (!ops) { 487 rc = -ENOMEM; 488 goto err_ops; 489 } 490 ops->lcread = fsl_local_config_read; 491 ops->lcwrite = fsl_local_config_write; 492 ops->cread = fsl_rio_config_read; 493 ops->cwrite = fsl_rio_config_write; 494 ops->dsend = fsl_rio_doorbell_send; 495 ops->pwenable = fsl_rio_pw_enable; 496 ops->open_outb_mbox = fsl_open_outb_mbox; 497 ops->open_inb_mbox = fsl_open_inb_mbox; 498 ops->close_outb_mbox = fsl_close_outb_mbox; 499 ops->close_inb_mbox = fsl_close_inb_mbox; 500 ops->add_outb_message = fsl_add_outb_message; 501 ops->add_inb_buffer = fsl_add_inb_buffer; 502 ops->get_inb_message = fsl_get_inb_message; 503 ops->map_inb = fsl_map_inb_mem; 504 ops->unmap_inb = fsl_unmap_inb_mem; 505 506 rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0); 507 if (!rmu_node) { 508 dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n"); 509 rc = -ENOENT; 510 goto err_rmu; 511 } 512 rc = of_address_to_resource(rmu_node, 0, &rmu_regs); 513 if (rc) { 514 dev_err(&dev->dev, "Can't get %pOF property 'reg'\n", 515 rmu_node); 516 of_node_put(rmu_node); 517 goto err_rmu; 518 } 519 of_node_put(rmu_node); 520 rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs)); 521 if (!rmu_regs_win) { 522 dev_err(&dev->dev, "Unable to map rmu register window\n"); 523 rc = -ENOMEM; 524 goto err_rmu; 525 } 526 for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") { 527 rmu_np[tmp] = np; 528 tmp++; 529 } 530 531 /*set up doobell node*/ 532 np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit"); 533 if (!np) { 534 dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n"); 535 rc = -ENODEV; 536 goto err_dbell; 537 } 538 dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL); 539 if (!(dbell)) { 540 dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n"); 541 rc = -ENOMEM; 542 goto err_dbell; 543 } 544 dbell->dev = &dev->dev; 545 dbell->bellirq = irq_of_parse_and_map(np, 1); 546 dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq); 547 548 aw = of_n_addr_cells(np); 549 dt_range = of_get_property(np, "reg", &rlen); 550 if (!dt_range) { 551 pr_err("%pOF: unable to find 'reg' property\n", 552 np); 553 rc = -ENOMEM; 554 goto err_pw; 555 } 556 range_start = of_read_number(dt_range, aw); 557 dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win + 558 (u32)range_start); 559 560 /*set up port write node*/ 561 np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit"); 562 if (!np) { 563 dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n"); 564 rc = -ENODEV; 565 goto err_pw; 566 } 567 pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL); 568 if (!(pw)) { 569 dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n"); 570 rc = -ENOMEM; 571 goto err_pw; 572 } 573 pw->dev = &dev->dev; 574 pw->pwirq = irq_of_parse_and_map(np, 0); 575 dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq); 576 aw = of_n_addr_cells(np); 577 dt_range = of_get_property(np, "reg", &rlen); 578 if (!dt_range) { 579 pr_err("%pOF: unable to find 'reg' property\n", 580 np); 581 rc = -ENOMEM; 582 goto err; 583 } 584 range_start = of_read_number(dt_range, aw); 585 pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start); 586 587 /*set up ports node*/ 588 for_each_child_of_node(dev->dev.of_node, np) { 589 port_index = of_get_property(np, "cell-index", NULL); 590 if (!port_index) { 591 dev_err(&dev->dev, "Can't get %pOF property 'cell-index'\n", 592 np); 593 continue; 594 } 595 596 dt_range = of_get_property(np, "ranges", &rlen); 597 if (!dt_range) { 598 dev_err(&dev->dev, "Can't get %pOF property 'ranges'\n", 599 np); 600 continue; 601 } 602 603 /* Get node address wide */ 604 cell = of_get_property(np, "#address-cells", NULL); 605 if (cell) 606 aw = *cell; 607 else 608 aw = of_n_addr_cells(np); 609 /* Get node size wide */ 610 cell = of_get_property(np, "#size-cells", NULL); 611 if (cell) 612 sw = *cell; 613 else 614 sw = of_n_size_cells(np); 615 /* Get parent address wide wide */ 616 paw = of_n_addr_cells(np); 617 range_start = of_read_number(dt_range + aw, paw); 618 range_size = of_read_number(dt_range + aw + paw, sw); 619 620 dev_info(&dev->dev, "%pOF: LAW start 0x%016llx, size 0x%016llx.\n", 621 np, range_start, range_size); 622 623 port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); 624 if (!port) 625 continue; 626 627 rc = rio_mport_initialize(port); 628 if (rc) { 629 kfree(port); 630 continue; 631 } 632 633 i = *port_index - 1; 634 port->index = (unsigned char)i; 635 636 priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL); 637 if (!priv) { 638 dev_err(&dev->dev, "Can't alloc memory for 'priv'\n"); 639 kfree(port); 640 continue; 641 } 642 643 INIT_LIST_HEAD(&port->dbells); 644 port->iores.start = range_start; 645 port->iores.end = port->iores.start + range_size - 1; 646 port->iores.flags = IORESOURCE_MEM; 647 port->iores.name = "rio_io_win"; 648 649 if (request_resource(&iomem_resource, &port->iores) < 0) { 650 dev_err(&dev->dev, "RIO: Error requesting master port region" 651 " 0x%016llx-0x%016llx\n", 652 (u64)port->iores.start, (u64)port->iores.end); 653 kfree(priv); 654 kfree(port); 655 continue; 656 } 657 sprintf(port->name, "RIO mport %d", i); 658 659 priv->dev = &dev->dev; 660 port->dev.parent = &dev->dev; 661 port->ops = ops; 662 port->priv = priv; 663 port->phys_efptr = 0x100; 664 port->phys_rmap = 1; 665 priv->regs_win = rio_regs_win; 666 667 ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20); 668 669 /* Checking the port training status */ 670 if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) { 671 dev_err(&dev->dev, "Port %d is not ready. " 672 "Try to restart connection...\n", i); 673 /* Disable ports */ 674 out_be32(priv->regs_win 675 + RIO_CCSR + i*0x20, 0); 676 /* Set 1x lane */ 677 setbits32(priv->regs_win 678 + RIO_CCSR + i*0x20, 0x02000000); 679 /* Enable ports */ 680 setbits32(priv->regs_win 681 + RIO_CCSR + i*0x20, 0x00600000); 682 msleep(100); 683 if (in_be32((priv->regs_win 684 + RIO_ESCSR + i*0x20)) & 1) { 685 dev_err(&dev->dev, 686 "Port %d restart failed.\n", i); 687 release_resource(&port->iores); 688 kfree(priv); 689 kfree(port); 690 continue; 691 } 692 dev_info(&dev->dev, "Port %d restart success!\n", i); 693 } 694 fsl_rio_info(&dev->dev, ccsr); 695 696 port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR)) 697 & RIO_PEF_CTLS) >> 4; 698 dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n", 699 port->sys_size ? 65536 : 256); 700 701 if (port->host_deviceid >= 0) 702 out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST | 703 RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED); 704 else 705 out_be32(priv->regs_win + RIO_GCCSR, 706 RIO_PORT_GEN_MASTER); 707 708 priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win 709 + ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET : 710 RIO_ATMU_REGS_PORT2_OFFSET)); 711 712 priv->maint_atmu_regs = priv->atmu_regs + 1; 713 priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *) 714 (priv->regs_win + 715 ((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET : 716 RIO_INB_ATMU_REGS_PORT2_OFFSET)); 717 718 /* Set to receive packets with any dest ID */ 719 out_be32((priv->regs_win + RIO_ISR_AACR + i*0x80), 720 RIO_ISR_AACR_AA); 721 722 /* Configure maintenance transaction window */ 723 out_be32(&priv->maint_atmu_regs->rowbar, 724 port->iores.start >> 12); 725 out_be32(&priv->maint_atmu_regs->rowar, 726 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1)); 727 728 priv->maint_win = ioremap(port->iores.start, 729 RIO_MAINT_WIN_SIZE); 730 731 rio_law_start = range_start; 732 733 fsl_rio_setup_rmu(port, rmu_np[i]); 734 fsl_rio_inbound_mem_init(priv); 735 736 dbell->mport[i] = port; 737 pw->mport[i] = port; 738 739 if (rio_register_mport(port)) { 740 release_resource(&port->iores); 741 kfree(priv); 742 kfree(port); 743 continue; 744 } 745 active_ports++; 746 } 747 748 if (!active_ports) { 749 rc = -ENOLINK; 750 goto err; 751 } 752 753 fsl_rio_doorbell_init(dbell); 754 fsl_rio_port_write_init(pw); 755 756 return 0; 757 err: 758 kfree(pw); 759 pw = NULL; 760 err_pw: 761 kfree(dbell); 762 dbell = NULL; 763 err_dbell: 764 iounmap(rmu_regs_win); 765 rmu_regs_win = NULL; 766 err_rmu: 767 kfree(ops); 768 err_ops: 769 iounmap(rio_regs_win); 770 rio_regs_win = NULL; 771 err_rio_regs: 772 return rc; 773 } 774 775 /* The probe function for RapidIO peer-to-peer network. 776 */ 777 static int fsl_of_rio_rpn_probe(struct platform_device *dev) 778 { 779 printk(KERN_INFO "Setting up RapidIO peer-to-peer network %pOF\n", 780 dev->dev.of_node); 781 782 return fsl_rio_setup(dev); 783 }; 784 785 static const struct of_device_id fsl_of_rio_rpn_ids[] = { 786 { 787 .compatible = "fsl,srio", 788 }, 789 {}, 790 }; 791 792 static struct platform_driver fsl_of_rio_rpn_driver = { 793 .driver = { 794 .name = "fsl-of-rio", 795 .of_match_table = fsl_of_rio_rpn_ids, 796 }, 797 .probe = fsl_of_rio_rpn_probe, 798 }; 799 800 static __init int fsl_of_rio_rpn_init(void) 801 { 802 return platform_driver_register(&fsl_of_rio_rpn_driver); 803 } 804 805 subsys_initcall(fsl_of_rio_rpn_init); 806