xref: /openbmc/linux/arch/powerpc/sysdev/fsl_pci.h (revision f35e839a)
1 /*
2  * MPC85xx/86xx PCI Express structure define
3  *
4  * Copyright 2007,2011 Freescale Semiconductor, Inc
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  *
11  */
12 
13 #ifdef __KERNEL__
14 #ifndef __POWERPC_FSL_PCI_H
15 #define __POWERPC_FSL_PCI_H
16 
17 struct platform_device;
18 
19 #define PCIE_LTSSM	0x0404		/* PCIE Link Training and Status */
20 #define PCIE_LTSSM_L0	0x16		/* L0 state */
21 #define PCIE_IP_REV_2_2		0x02080202 /* PCIE IP block version Rev2.2 */
22 #define PCIE_IP_REV_3_0		0x02080300 /* PCIE IP block version Rev3.0 */
23 #define PIWAR_EN		0x80000000	/* Enable */
24 #define PIWAR_PF		0x20000000	/* prefetch */
25 #define PIWAR_TGI_LOCAL		0x00f00000	/* target - local memory */
26 #define PIWAR_READ_SNOOP	0x00050000
27 #define PIWAR_WRITE_SNOOP	0x00005000
28 #define PIWAR_SZ_MASK          0x0000003f
29 
30 /* PCI/PCI Express outbound window reg */
31 struct pci_outbound_window_regs {
32 	__be32	potar;	/* 0x.0 - Outbound translation address register */
33 	__be32	potear;	/* 0x.4 - Outbound translation extended address register */
34 	__be32	powbar;	/* 0x.8 - Outbound window base address register */
35 	u8	res1[4];
36 	__be32	powar;	/* 0x.10 - Outbound window attributes register */
37 	u8	res2[12];
38 };
39 
40 /* PCI/PCI Express inbound window reg */
41 struct pci_inbound_window_regs {
42 	__be32	pitar;	/* 0x.0 - Inbound translation address register */
43 	u8	res1[4];
44 	__be32	piwbar;	/* 0x.8 - Inbound window base address register */
45 	__be32	piwbear;	/* 0x.c - Inbound window base extended address register */
46 	__be32	piwar;	/* 0x.10 - Inbound window attributes register */
47 	u8	res2[12];
48 };
49 
50 /* PCI/PCI Express IO block registers for 85xx/86xx */
51 struct ccsr_pci {
52 	__be32	config_addr;		/* 0x.000 - PCI/PCIE Configuration Address Register */
53 	__be32	config_data;		/* 0x.004 - PCI/PCIE Configuration Data Register */
54 	__be32	int_ack;		/* 0x.008 - PCI Interrupt Acknowledge Register */
55 	__be32	pex_otb_cpl_tor;	/* 0x.00c - PCIE Outbound completion timeout register */
56 	__be32	pex_conf_tor;		/* 0x.010 - PCIE configuration timeout register */
57 	__be32	pex_config;		/* 0x.014 - PCIE CONFIG Register */
58 	__be32	pex_int_status;		/* 0x.018 - PCIE interrupt status */
59 	u8	res2[4];
60 	__be32	pex_pme_mes_dr;		/* 0x.020 - PCIE PME and message detect register */
61 	__be32	pex_pme_mes_disr;	/* 0x.024 - PCIE PME and message disable register */
62 	__be32	pex_pme_mes_ier;	/* 0x.028 - PCIE PME and message interrupt enable register */
63 	__be32	pex_pmcr;		/* 0x.02c - PCIE power management command register */
64 	u8	res3[3016];
65 	__be32	block_rev1;	/* 0x.bf8 - PCIE Block Revision register 1 */
66 	__be32	block_rev2;	/* 0x.bfc - PCIE Block Revision register 2 */
67 
68 /* PCI/PCI Express outbound window 0-4
69  * Window 0 is the default window and is the only window enabled upon reset.
70  * The default outbound register set is used when a transaction misses
71  * in all of the other outbound windows.
72  */
73 	struct pci_outbound_window_regs pow[5];
74 	u8	res14[96];
75 	struct pci_inbound_window_regs	pmit;	/* 0xd00 - 0xd9c Inbound MSI */
76 	u8	res6[96];
77 /* PCI/PCI Express inbound window 3-0
78  * inbound window 1 supports only a 32-bit base address and does not
79  * define an inbound window base extended address register.
80  */
81 	struct pci_inbound_window_regs piw[4];
82 
83 	__be32	pex_err_dr;		/* 0x.e00 - PCI/PCIE error detect register */
84 	u8	res21[4];
85 	__be32	pex_err_en;		/* 0x.e08 - PCI/PCIE error interrupt enable register */
86 	u8	res22[4];
87 	__be32	pex_err_disr;		/* 0x.e10 - PCI/PCIE error disable register */
88 	u8	res23[12];
89 	__be32	pex_err_cap_stat;	/* 0x.e20 - PCI/PCIE error capture status register */
90 	u8	res24[4];
91 	__be32	pex_err_cap_r0;		/* 0x.e28 - PCIE error capture register 0 */
92 	__be32	pex_err_cap_r1;		/* 0x.e2c - PCIE error capture register 0 */
93 	__be32	pex_err_cap_r2;		/* 0x.e30 - PCIE error capture register 0 */
94 	__be32	pex_err_cap_r3;		/* 0x.e34 - PCIE error capture register 0 */
95 	u8	res_e38[200];
96 	__be32	pdb_stat;		/* 0x.f00 - PCIE Debug Status */
97 	u8	res_f04[16];
98 	__be32	pex_csr0;		/* 0x.f14 - PEX Control/Status register 0*/
99 #define PEX_CSR0_LTSSM_MASK	0xFC
100 #define PEX_CSR0_LTSSM_SHIFT	2
101 #define PEX_CSR0_LTSSM_L0	0x11
102 	__be32	pex_csr1;		/* 0x.f18 - PEX Control/Status register 1*/
103 	u8	res_f1c[228];
104 
105 };
106 
107 extern int fsl_add_bridge(struct platform_device *pdev, int is_primary);
108 extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
109 extern int mpc83xx_add_bridge(struct device_node *dev);
110 u64 fsl_pci_immrbar_base(struct pci_controller *hose);
111 
112 extern struct device_node *fsl_pci_primary;
113 
114 #ifdef CONFIG_PCI
115 void fsl_pci_assign_primary(void);
116 #else
117 static inline void fsl_pci_assign_primary(void) {}
118 #endif
119 
120 #ifdef CONFIG_EDAC_MPC85XX
121 int mpc85xx_pci_err_probe(struct platform_device *op);
122 #else
123 static inline int mpc85xx_pci_err_probe(struct platform_device *op)
124 {
125 	return -ENOTSUPP;
126 }
127 #endif
128 
129 #endif /* __POWERPC_FSL_PCI_H */
130 #endif /* __KERNEL__ */
131