xref: /openbmc/linux/arch/powerpc/sysdev/fsl_pci.h (revision 77423a62)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * MPC85xx/86xx PCI Express structure define
4  *
5  * Copyright 2007,2011 Freescale Semiconductor, Inc
6  */
7 
8 #ifdef __KERNEL__
9 #ifndef __POWERPC_FSL_PCI_H
10 #define __POWERPC_FSL_PCI_H
11 
12 struct platform_device;
13 
14 
15 /* FSL PCI controller BRR1 register */
16 #define PCI_FSL_BRR1      0xbf8
17 #define PCI_FSL_BRR1_VER 0xffff
18 
19 #define PCIE_LTSSM	0x0404		/* PCIE Link Training and Status */
20 #define PCIE_LTSSM_L0	0x16		/* L0 state */
21 #define PCIE_FSL_CSR_CLASSCODE	0x474	/* FSL GPEX CSR */
22 #define PCIE_IP_REV_2_2		0x02080202 /* PCIE IP block version Rev2.2 */
23 #define PCIE_IP_REV_3_0		0x02080300 /* PCIE IP block version Rev3.0 */
24 #define PIWAR_EN		0x80000000	/* Enable */
25 #define PIWAR_PF		0x20000000	/* prefetch */
26 #define PIWAR_TGI_LOCAL		0x00f00000	/* target - local memory */
27 #define PIWAR_READ_SNOOP	0x00050000
28 #define PIWAR_WRITE_SNOOP	0x00005000
29 #define PIWAR_SZ_MASK          0x0000003f
30 
31 #define PEX_PMCR_PTOMR		0x1
32 #define PEX_PMCR_EXL2S		0x2
33 
34 #define PME_DISR_EN_PTOD	0x00008000
35 #define PME_DISR_EN_ENL23D	0x00002000
36 #define PME_DISR_EN_EXL23D	0x00001000
37 
38 /* PCI/PCI Express outbound window reg */
39 struct pci_outbound_window_regs {
40 	__be32	potar;	/* 0x.0 - Outbound translation address register */
41 	__be32	potear;	/* 0x.4 - Outbound translation extended address register */
42 	__be32	powbar;	/* 0x.8 - Outbound window base address register */
43 	u8	res1[4];
44 	__be32	powar;	/* 0x.10 - Outbound window attributes register */
45 	u8	res2[12];
46 };
47 
48 /* PCI/PCI Express inbound window reg */
49 struct pci_inbound_window_regs {
50 	__be32	pitar;	/* 0x.0 - Inbound translation address register */
51 	u8	res1[4];
52 	__be32	piwbar;	/* 0x.8 - Inbound window base address register */
53 	__be32	piwbear;	/* 0x.c - Inbound window base extended address register */
54 	__be32	piwar;	/* 0x.10 - Inbound window attributes register */
55 	u8	res2[12];
56 };
57 
58 /* PCI/PCI Express IO block registers for 85xx/86xx */
59 struct ccsr_pci {
60 	__be32	config_addr;		/* 0x.000 - PCI/PCIE Configuration Address Register */
61 	__be32	config_data;		/* 0x.004 - PCI/PCIE Configuration Data Register */
62 	__be32	int_ack;		/* 0x.008 - PCI Interrupt Acknowledge Register */
63 	__be32	pex_otb_cpl_tor;	/* 0x.00c - PCIE Outbound completion timeout register */
64 	__be32	pex_conf_tor;		/* 0x.010 - PCIE configuration timeout register */
65 	__be32	pex_config;		/* 0x.014 - PCIE CONFIG Register */
66 	__be32	pex_int_status;		/* 0x.018 - PCIE interrupt status */
67 	u8	res2[4];
68 	__be32	pex_pme_mes_dr;		/* 0x.020 - PCIE PME and message detect register */
69 	__be32	pex_pme_mes_disr;	/* 0x.024 - PCIE PME and message disable register */
70 	__be32	pex_pme_mes_ier;	/* 0x.028 - PCIE PME and message interrupt enable register */
71 	__be32	pex_pmcr;		/* 0x.02c - PCIE power management command register */
72 	u8	res3[3016];
73 	__be32	block_rev1;	/* 0x.bf8 - PCIE Block Revision register 1 */
74 	__be32	block_rev2;	/* 0x.bfc - PCIE Block Revision register 2 */
75 
76 /* PCI/PCI Express outbound window 0-4
77  * Window 0 is the default window and is the only window enabled upon reset.
78  * The default outbound register set is used when a transaction misses
79  * in all of the other outbound windows.
80  */
81 	struct pci_outbound_window_regs pow[5];
82 	u8	res14[96];
83 	struct pci_inbound_window_regs	pmit;	/* 0xd00 - 0xd9c Inbound MSI */
84 	u8	res6[96];
85 /* PCI/PCI Express inbound window 3-0
86  * inbound window 1 supports only a 32-bit base address and does not
87  * define an inbound window base extended address register.
88  */
89 	struct pci_inbound_window_regs piw[4];
90 
91 	__be32	pex_err_dr;		/* 0x.e00 - PCI/PCIE error detect register */
92 	u8	res21[4];
93 	__be32	pex_err_en;		/* 0x.e08 - PCI/PCIE error interrupt enable register */
94 	u8	res22[4];
95 	__be32	pex_err_disr;		/* 0x.e10 - PCI/PCIE error disable register */
96 	u8	res23[12];
97 	__be32	pex_err_cap_stat;	/* 0x.e20 - PCI/PCIE error capture status register */
98 	u8	res24[4];
99 	__be32	pex_err_cap_r0;		/* 0x.e28 - PCIE error capture register 0 */
100 	__be32	pex_err_cap_r1;		/* 0x.e2c - PCIE error capture register 0 */
101 	__be32	pex_err_cap_r2;		/* 0x.e30 - PCIE error capture register 0 */
102 	__be32	pex_err_cap_r3;		/* 0x.e34 - PCIE error capture register 0 */
103 	u8	res_e38[200];
104 	__be32	pdb_stat;		/* 0x.f00 - PCIE Debug Status */
105 	u8	res_f04[16];
106 	__be32	pex_csr0;		/* 0x.f14 - PEX Control/Status register 0*/
107 #define PEX_CSR0_LTSSM_MASK	0xFC
108 #define PEX_CSR0_LTSSM_SHIFT	2
109 #define PEX_CSR0_LTSSM_L0	0x11
110 	__be32	pex_csr1;		/* 0x.f18 - PEX Control/Status register 1*/
111 	u8	res_f1c[228];
112 
113 };
114 
115 extern int fsl_add_bridge(struct platform_device *pdev, int is_primary);
116 extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
117 extern void fsl_pcibios_fixup_phb(struct pci_controller *phb);
118 extern int mpc83xx_add_bridge(struct device_node *dev);
119 u64 fsl_pci_immrbar_base(struct pci_controller *hose);
120 
121 extern struct device_node *fsl_pci_primary;
122 
123 #ifdef CONFIG_PCI
124 void __init fsl_pci_assign_primary(void);
125 #else
126 static inline void fsl_pci_assign_primary(void) {}
127 #endif
128 
129 #ifdef CONFIG_FSL_PCI
130 extern int fsl_pci_mcheck_exception(struct pt_regs *);
131 #else
132 static inline int fsl_pci_mcheck_exception(struct pt_regs *regs) {return 0; }
133 #endif
134 
135 #endif /* __POWERPC_FSL_PCI_H */
136 #endif /* __KERNEL__ */
137