xref: /openbmc/linux/arch/powerpc/sysdev/fsl_pci.h (revision 5bd8e16d)
1 /*
2  * MPC85xx/86xx PCI Express structure define
3  *
4  * Copyright 2007,2011 Freescale Semiconductor, Inc
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  *
11  */
12 
13 #ifdef __KERNEL__
14 #ifndef __POWERPC_FSL_PCI_H
15 #define __POWERPC_FSL_PCI_H
16 
17 struct platform_device;
18 
19 
20 /* FSL PCI controller BRR1 register */
21 #define PCI_FSL_BRR1      0xbf8
22 #define PCI_FSL_BRR1_VER 0xffff
23 
24 #define PCIE_LTSSM	0x0404		/* PCIE Link Training and Status */
25 #define PCIE_LTSSM_L0	0x16		/* L0 state */
26 #define PCIE_IP_REV_2_2		0x02080202 /* PCIE IP block version Rev2.2 */
27 #define PCIE_IP_REV_3_0		0x02080300 /* PCIE IP block version Rev3.0 */
28 #define PIWAR_EN		0x80000000	/* Enable */
29 #define PIWAR_PF		0x20000000	/* prefetch */
30 #define PIWAR_TGI_LOCAL		0x00f00000	/* target - local memory */
31 #define PIWAR_READ_SNOOP	0x00050000
32 #define PIWAR_WRITE_SNOOP	0x00005000
33 #define PIWAR_SZ_MASK          0x0000003f
34 
35 /* PCI/PCI Express outbound window reg */
36 struct pci_outbound_window_regs {
37 	__be32	potar;	/* 0x.0 - Outbound translation address register */
38 	__be32	potear;	/* 0x.4 - Outbound translation extended address register */
39 	__be32	powbar;	/* 0x.8 - Outbound window base address register */
40 	u8	res1[4];
41 	__be32	powar;	/* 0x.10 - Outbound window attributes register */
42 	u8	res2[12];
43 };
44 
45 /* PCI/PCI Express inbound window reg */
46 struct pci_inbound_window_regs {
47 	__be32	pitar;	/* 0x.0 - Inbound translation address register */
48 	u8	res1[4];
49 	__be32	piwbar;	/* 0x.8 - Inbound window base address register */
50 	__be32	piwbear;	/* 0x.c - Inbound window base extended address register */
51 	__be32	piwar;	/* 0x.10 - Inbound window attributes register */
52 	u8	res2[12];
53 };
54 
55 /* PCI/PCI Express IO block registers for 85xx/86xx */
56 struct ccsr_pci {
57 	__be32	config_addr;		/* 0x.000 - PCI/PCIE Configuration Address Register */
58 	__be32	config_data;		/* 0x.004 - PCI/PCIE Configuration Data Register */
59 	__be32	int_ack;		/* 0x.008 - PCI Interrupt Acknowledge Register */
60 	__be32	pex_otb_cpl_tor;	/* 0x.00c - PCIE Outbound completion timeout register */
61 	__be32	pex_conf_tor;		/* 0x.010 - PCIE configuration timeout register */
62 	__be32	pex_config;		/* 0x.014 - PCIE CONFIG Register */
63 	__be32	pex_int_status;		/* 0x.018 - PCIE interrupt status */
64 	u8	res2[4];
65 	__be32	pex_pme_mes_dr;		/* 0x.020 - PCIE PME and message detect register */
66 	__be32	pex_pme_mes_disr;	/* 0x.024 - PCIE PME and message disable register */
67 	__be32	pex_pme_mes_ier;	/* 0x.028 - PCIE PME and message interrupt enable register */
68 	__be32	pex_pmcr;		/* 0x.02c - PCIE power management command register */
69 	u8	res3[3016];
70 	__be32	block_rev1;	/* 0x.bf8 - PCIE Block Revision register 1 */
71 	__be32	block_rev2;	/* 0x.bfc - PCIE Block Revision register 2 */
72 
73 /* PCI/PCI Express outbound window 0-4
74  * Window 0 is the default window and is the only window enabled upon reset.
75  * The default outbound register set is used when a transaction misses
76  * in all of the other outbound windows.
77  */
78 	struct pci_outbound_window_regs pow[5];
79 	u8	res14[96];
80 	struct pci_inbound_window_regs	pmit;	/* 0xd00 - 0xd9c Inbound MSI */
81 	u8	res6[96];
82 /* PCI/PCI Express inbound window 3-0
83  * inbound window 1 supports only a 32-bit base address and does not
84  * define an inbound window base extended address register.
85  */
86 	struct pci_inbound_window_regs piw[4];
87 
88 	__be32	pex_err_dr;		/* 0x.e00 - PCI/PCIE error detect register */
89 	u8	res21[4];
90 	__be32	pex_err_en;		/* 0x.e08 - PCI/PCIE error interrupt enable register */
91 	u8	res22[4];
92 	__be32	pex_err_disr;		/* 0x.e10 - PCI/PCIE error disable register */
93 	u8	res23[12];
94 	__be32	pex_err_cap_stat;	/* 0x.e20 - PCI/PCIE error capture status register */
95 	u8	res24[4];
96 	__be32	pex_err_cap_r0;		/* 0x.e28 - PCIE error capture register 0 */
97 	__be32	pex_err_cap_r1;		/* 0x.e2c - PCIE error capture register 0 */
98 	__be32	pex_err_cap_r2;		/* 0x.e30 - PCIE error capture register 0 */
99 	__be32	pex_err_cap_r3;		/* 0x.e34 - PCIE error capture register 0 */
100 	u8	res_e38[200];
101 	__be32	pdb_stat;		/* 0x.f00 - PCIE Debug Status */
102 	u8	res_f04[16];
103 	__be32	pex_csr0;		/* 0x.f14 - PEX Control/Status register 0*/
104 #define PEX_CSR0_LTSSM_MASK	0xFC
105 #define PEX_CSR0_LTSSM_SHIFT	2
106 #define PEX_CSR0_LTSSM_L0	0x11
107 	__be32	pex_csr1;		/* 0x.f18 - PEX Control/Status register 1*/
108 	u8	res_f1c[228];
109 
110 };
111 
112 extern int fsl_add_bridge(struct platform_device *pdev, int is_primary);
113 extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
114 extern int mpc83xx_add_bridge(struct device_node *dev);
115 u64 fsl_pci_immrbar_base(struct pci_controller *hose);
116 
117 extern struct device_node *fsl_pci_primary;
118 
119 #ifdef CONFIG_PCI
120 void fsl_pci_assign_primary(void);
121 #else
122 static inline void fsl_pci_assign_primary(void) {}
123 #endif
124 
125 #ifdef CONFIG_EDAC_MPC85XX
126 int mpc85xx_pci_err_probe(struct platform_device *op);
127 #else
128 static inline int mpc85xx_pci_err_probe(struct platform_device *op)
129 {
130 	return -ENOTSUPP;
131 }
132 #endif
133 
134 #ifdef CONFIG_FSL_PCI
135 extern int fsl_pci_mcheck_exception(struct pt_regs *);
136 #else
137 static inline int fsl_pci_mcheck_exception(struct pt_regs *regs) {return 0; }
138 #endif
139 
140 #endif /* __POWERPC_FSL_PCI_H */
141 #endif /* __KERNEL__ */
142