1 /* 2 * MPC83xx/85xx/86xx PCI/PCIE support routing. 3 * 4 * Copyright 2007-2012 Freescale Semiconductor, Inc. 5 * Copyright 2008-2009 MontaVista Software, Inc. 6 * 7 * Initial author: Xianghua Xiao <x.xiao@freescale.com> 8 * Recode: ZHANG WEI <wei.zhang@freescale.com> 9 * Rewrite the routing for Frescale PCI and PCI Express 10 * Roy Zang <tie-fei.zang@freescale.com> 11 * MPC83xx PCI-Express support: 12 * Tony Li <tony.li@freescale.com> 13 * Anton Vorontsov <avorontsov@ru.mvista.com> 14 * 15 * This program is free software; you can redistribute it and/or modify it 16 * under the terms of the GNU General Public License as published by the 17 * Free Software Foundation; either version 2 of the License, or (at your 18 * option) any later version. 19 */ 20 #include <linux/kernel.h> 21 #include <linux/pci.h> 22 #include <linux/delay.h> 23 #include <linux/string.h> 24 #include <linux/fsl/edac.h> 25 #include <linux/init.h> 26 #include <linux/interrupt.h> 27 #include <linux/memblock.h> 28 #include <linux/log2.h> 29 #include <linux/platform_device.h> 30 #include <linux/slab.h> 31 #include <linux/suspend.h> 32 #include <linux/syscore_ops.h> 33 #include <linux/uaccess.h> 34 35 #include <asm/io.h> 36 #include <asm/prom.h> 37 #include <asm/pci-bridge.h> 38 #include <asm/ppc-pci.h> 39 #include <asm/machdep.h> 40 #include <asm/mpc85xx.h> 41 #include <asm/disassemble.h> 42 #include <asm/ppc-opcode.h> 43 #include <asm/swiotlb.h> 44 #include <sysdev/fsl_soc.h> 45 #include <sysdev/fsl_pci.h> 46 47 static int fsl_pcie_bus_fixup, is_mpc83xx_pci; 48 49 static void quirk_fsl_pcie_early(struct pci_dev *dev) 50 { 51 u8 hdr_type; 52 53 /* if we aren't a PCIe don't bother */ 54 if (!pci_is_pcie(dev)) 55 return; 56 57 /* if we aren't in host mode don't bother */ 58 pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type); 59 if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) 60 return; 61 62 dev->class = PCI_CLASS_BRIDGE_PCI << 8; 63 fsl_pcie_bus_fixup = 1; 64 return; 65 } 66 67 static int fsl_indirect_read_config(struct pci_bus *, unsigned int, 68 int, int, u32 *); 69 70 static int fsl_pcie_check_link(struct pci_controller *hose) 71 { 72 u32 val = 0; 73 74 if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) { 75 if (hose->ops->read == fsl_indirect_read_config) 76 __indirect_read_config(hose, hose->first_busno, 0, 77 PCIE_LTSSM, 4, &val); 78 else 79 early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); 80 if (val < PCIE_LTSSM_L0) 81 return 1; 82 } else { 83 struct ccsr_pci __iomem *pci = hose->private_data; 84 /* for PCIe IP rev 3.0 or greater use CSR0 for link state */ 85 val = (in_be32(&pci->pex_csr0) & PEX_CSR0_LTSSM_MASK) 86 >> PEX_CSR0_LTSSM_SHIFT; 87 if (val != PEX_CSR0_LTSSM_L0) 88 return 1; 89 } 90 91 return 0; 92 } 93 94 static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int devfn, 95 int offset, int len, u32 *val) 96 { 97 struct pci_controller *hose = pci_bus_to_host(bus); 98 99 if (fsl_pcie_check_link(hose)) 100 hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; 101 else 102 hose->indirect_type &= ~PPC_INDIRECT_TYPE_NO_PCIE_LINK; 103 104 return indirect_read_config(bus, devfn, offset, len, val); 105 } 106 107 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) 108 109 static struct pci_ops fsl_indirect_pcie_ops = 110 { 111 .read = fsl_indirect_read_config, 112 .write = indirect_write_config, 113 }; 114 115 static u64 pci64_dma_offset; 116 117 #ifdef CONFIG_SWIOTLB 118 static void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev) 119 { 120 struct pci_controller *hose = pci_bus_to_host(pdev->bus); 121 122 pdev->dev.bus_dma_mask = 123 hose->dma_window_base_cur + hose->dma_window_size; 124 } 125 126 static void setup_swiotlb_ops(struct pci_controller *hose) 127 { 128 if (ppc_swiotlb_enable) 129 hose->controller_ops.dma_dev_setup = pci_dma_dev_setup_swiotlb; 130 } 131 #else 132 static inline void setup_swiotlb_ops(struct pci_controller *hose) {} 133 #endif 134 135 static void fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask) 136 { 137 /* 138 * Fix up PCI devices that are able to DMA to the large inbound 139 * mapping that allows addressing any RAM address from across PCI. 140 */ 141 if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) { 142 dev->bus_dma_mask = 0; 143 dev->archdata.dma_offset = pci64_dma_offset; 144 } 145 } 146 147 static int setup_one_atmu(struct ccsr_pci __iomem *pci, 148 unsigned int index, const struct resource *res, 149 resource_size_t offset) 150 { 151 resource_size_t pci_addr = res->start - offset; 152 resource_size_t phys_addr = res->start; 153 resource_size_t size = resource_size(res); 154 u32 flags = 0x80044000; /* enable & mem R/W */ 155 unsigned int i; 156 157 pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n", 158 (u64)res->start, (u64)size); 159 160 if (res->flags & IORESOURCE_PREFETCH) 161 flags |= 0x10000000; /* enable relaxed ordering */ 162 163 for (i = 0; size > 0; i++) { 164 unsigned int bits = min_t(u32, ilog2(size), 165 __ffs(pci_addr | phys_addr)); 166 167 if (index + i >= 5) 168 return -1; 169 170 out_be32(&pci->pow[index + i].potar, pci_addr >> 12); 171 out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44); 172 out_be32(&pci->pow[index + i].powbar, phys_addr >> 12); 173 out_be32(&pci->pow[index + i].powar, flags | (bits - 1)); 174 175 pci_addr += (resource_size_t)1U << bits; 176 phys_addr += (resource_size_t)1U << bits; 177 size -= (resource_size_t)1U << bits; 178 } 179 180 return i; 181 } 182 183 static bool is_kdump(void) 184 { 185 struct device_node *node; 186 187 node = of_find_node_by_type(NULL, "memory"); 188 if (!node) { 189 WARN_ON_ONCE(1); 190 return false; 191 } 192 193 return of_property_read_bool(node, "linux,usable-memory"); 194 } 195 196 /* atmu setup for fsl pci/pcie controller */ 197 static void setup_pci_atmu(struct pci_controller *hose) 198 { 199 struct ccsr_pci __iomem *pci = hose->private_data; 200 int i, j, n, mem_log, win_idx = 3, start_idx = 1, end_idx = 4; 201 u64 mem, sz, paddr_hi = 0; 202 u64 offset = 0, paddr_lo = ULLONG_MAX; 203 u32 pcicsrbar = 0, pcicsrbar_sz; 204 u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL | 205 PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; 206 const u64 *reg; 207 int len; 208 bool setup_inbound; 209 210 /* 211 * If this is kdump, we don't want to trigger a bunch of PCI 212 * errors by closing the window on in-flight DMA. 213 * 214 * We still run most of the function's logic so that things like 215 * hose->dma_window_size still get set. 216 */ 217 setup_inbound = !is_kdump(); 218 219 if (of_device_is_compatible(hose->dn, "fsl,bsc9132-pcie")) { 220 /* 221 * BSC9132 Rev1.0 has an issue where all the PEX inbound 222 * windows have implemented the default target value as 0xf 223 * for CCSR space.In all Freescale legacy devices the target 224 * of 0xf is reserved for local memory space. 9132 Rev1.0 225 * now has local mempry space mapped to target 0x0 instead of 226 * 0xf. Hence adding a workaround to remove the target 0xf 227 * defined for memory space from Inbound window attributes. 228 */ 229 piwar &= ~PIWAR_TGI_LOCAL; 230 } 231 232 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { 233 if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) { 234 win_idx = 2; 235 start_idx = 0; 236 end_idx = 3; 237 } 238 } 239 240 /* Disable all windows (except powar0 since it's ignored) */ 241 for(i = 1; i < 5; i++) 242 out_be32(&pci->pow[i].powar, 0); 243 244 if (setup_inbound) { 245 for (i = start_idx; i < end_idx; i++) 246 out_be32(&pci->piw[i].piwar, 0); 247 } 248 249 /* Setup outbound MEM window */ 250 for(i = 0, j = 1; i < 3; i++) { 251 if (!(hose->mem_resources[i].flags & IORESOURCE_MEM)) 252 continue; 253 254 paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start); 255 paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end); 256 257 /* We assume all memory resources have the same offset */ 258 offset = hose->mem_offset[i]; 259 n = setup_one_atmu(pci, j, &hose->mem_resources[i], offset); 260 261 if (n < 0 || j >= 5) { 262 pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i); 263 hose->mem_resources[i].flags |= IORESOURCE_DISABLED; 264 } else 265 j += n; 266 } 267 268 /* Setup outbound IO window */ 269 if (hose->io_resource.flags & IORESOURCE_IO) { 270 if (j >= 5) { 271 pr_err("Ran out of outbound PCI ATMUs for IO resource\n"); 272 } else { 273 pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, " 274 "phy base 0x%016llx.\n", 275 (u64)hose->io_resource.start, 276 (u64)resource_size(&hose->io_resource), 277 (u64)hose->io_base_phys); 278 out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12)); 279 out_be32(&pci->pow[j].potear, 0); 280 out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12)); 281 /* Enable, IO R/W */ 282 out_be32(&pci->pow[j].powar, 0x80088000 283 | (ilog2(hose->io_resource.end 284 - hose->io_resource.start + 1) - 1)); 285 } 286 } 287 288 /* convert to pci address space */ 289 paddr_hi -= offset; 290 paddr_lo -= offset; 291 292 if (paddr_hi == paddr_lo) { 293 pr_err("%pOF: No outbound window space\n", hose->dn); 294 return; 295 } 296 297 if (paddr_lo == 0) { 298 pr_err("%pOF: No space for inbound window\n", hose->dn); 299 return; 300 } 301 302 /* setup PCSRBAR/PEXCSRBAR */ 303 early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff); 304 early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz); 305 pcicsrbar_sz = ~pcicsrbar_sz + 1; 306 307 if (paddr_hi < (0x100000000ull - pcicsrbar_sz) || 308 (paddr_lo > 0x100000000ull)) 309 pcicsrbar = 0x100000000ull - pcicsrbar_sz; 310 else 311 pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz; 312 early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar); 313 314 paddr_lo = min(paddr_lo, (u64)pcicsrbar); 315 316 pr_info("%pOF: PCICSRBAR @ 0x%x\n", hose->dn, pcicsrbar); 317 318 /* Setup inbound mem window */ 319 mem = memblock_end_of_DRAM(); 320 pr_info("%s: end of DRAM %llx\n", __func__, mem); 321 322 /* 323 * The msi-address-64 property, if it exists, indicates the physical 324 * address of the MSIIR register. Normally, this register is located 325 * inside CCSR, so the ATMU that covers all of CCSR is used. But if 326 * this property exists, then we normally need to create a new ATMU 327 * for it. For now, however, we cheat. The only entity that creates 328 * this property is the Freescale hypervisor, and the address is 329 * specified in the partition configuration. Typically, the address 330 * is located in the page immediately after the end of DDR. If so, we 331 * can avoid allocating a new ATMU by extending the DDR ATMU by one 332 * page. 333 */ 334 reg = of_get_property(hose->dn, "msi-address-64", &len); 335 if (reg && (len == sizeof(u64))) { 336 u64 address = be64_to_cpup(reg); 337 338 if ((address >= mem) && (address < (mem + PAGE_SIZE))) { 339 pr_info("%pOF: extending DDR ATMU to cover MSIIR", hose->dn); 340 mem += PAGE_SIZE; 341 } else { 342 /* TODO: Create a new ATMU for MSIIR */ 343 pr_warn("%pOF: msi-address-64 address of %llx is " 344 "unsupported\n", hose->dn, address); 345 } 346 } 347 348 sz = min(mem, paddr_lo); 349 mem_log = ilog2(sz); 350 351 /* PCIe can overmap inbound & outbound since RX & TX are separated */ 352 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { 353 /* Size window to exact size if power-of-two or one size up */ 354 if ((1ull << mem_log) != mem) { 355 mem_log++; 356 if ((1ull << mem_log) > mem) 357 pr_info("%pOF: Setting PCI inbound window " 358 "greater than memory size\n", hose->dn); 359 } 360 361 piwar |= ((mem_log - 1) & PIWAR_SZ_MASK); 362 363 if (setup_inbound) { 364 /* Setup inbound memory window */ 365 out_be32(&pci->piw[win_idx].pitar, 0x00000000); 366 out_be32(&pci->piw[win_idx].piwbar, 0x00000000); 367 out_be32(&pci->piw[win_idx].piwar, piwar); 368 } 369 370 win_idx--; 371 hose->dma_window_base_cur = 0x00000000; 372 hose->dma_window_size = (resource_size_t)sz; 373 374 /* 375 * if we have >4G of memory setup second PCI inbound window to 376 * let devices that are 64-bit address capable to work w/o 377 * SWIOTLB and access the full range of memory 378 */ 379 if (sz != mem) { 380 mem_log = ilog2(mem); 381 382 /* Size window up if we dont fit in exact power-of-2 */ 383 if ((1ull << mem_log) != mem) 384 mem_log++; 385 386 piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1); 387 pci64_dma_offset = 1ULL << mem_log; 388 389 if (setup_inbound) { 390 /* Setup inbound memory window */ 391 out_be32(&pci->piw[win_idx].pitar, 0x00000000); 392 out_be32(&pci->piw[win_idx].piwbear, 393 pci64_dma_offset >> 44); 394 out_be32(&pci->piw[win_idx].piwbar, 395 pci64_dma_offset >> 12); 396 out_be32(&pci->piw[win_idx].piwar, piwar); 397 } 398 399 /* 400 * install our own dma_set_mask handler to fixup dma_ops 401 * and dma_offset 402 */ 403 ppc_md.dma_set_mask = fsl_pci_dma_set_mask; 404 405 pr_info("%pOF: Setup 64-bit PCI DMA window\n", hose->dn); 406 } 407 } else { 408 u64 paddr = 0; 409 410 if (setup_inbound) { 411 /* Setup inbound memory window */ 412 out_be32(&pci->piw[win_idx].pitar, paddr >> 12); 413 out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); 414 out_be32(&pci->piw[win_idx].piwar, 415 (piwar | (mem_log - 1))); 416 } 417 418 win_idx--; 419 paddr += 1ull << mem_log; 420 sz -= 1ull << mem_log; 421 422 if (sz) { 423 mem_log = ilog2(sz); 424 piwar |= (mem_log - 1); 425 426 if (setup_inbound) { 427 out_be32(&pci->piw[win_idx].pitar, 428 paddr >> 12); 429 out_be32(&pci->piw[win_idx].piwbar, 430 paddr >> 12); 431 out_be32(&pci->piw[win_idx].piwar, piwar); 432 } 433 434 win_idx--; 435 paddr += 1ull << mem_log; 436 } 437 438 hose->dma_window_base_cur = 0x00000000; 439 hose->dma_window_size = (resource_size_t)paddr; 440 } 441 442 if (hose->dma_window_size < mem) { 443 #ifdef CONFIG_SWIOTLB 444 ppc_swiotlb_enable = 1; 445 #else 446 pr_err("%pOF: ERROR: Memory size exceeds PCI ATMU ability to " 447 "map - enable CONFIG_SWIOTLB to avoid dma errors.\n", 448 hose->dn); 449 #endif 450 /* adjusting outbound windows could reclaim space in mem map */ 451 if (paddr_hi < 0xffffffffull) 452 pr_warn("%pOF: WARNING: Outbound window cfg leaves " 453 "gaps in memory map. Adjusting the memory map " 454 "could reduce unnecessary bounce buffering.\n", 455 hose->dn); 456 457 pr_info("%pOF: DMA window size is 0x%llx\n", hose->dn, 458 (u64)hose->dma_window_size); 459 } 460 } 461 462 static void __init setup_pci_cmd(struct pci_controller *hose) 463 { 464 u16 cmd; 465 int cap_x; 466 467 early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); 468 cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY 469 | PCI_COMMAND_IO; 470 early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); 471 472 cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX); 473 if (cap_x) { 474 int pci_x_cmd = cap_x + PCI_X_CMD; 475 cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ 476 | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; 477 early_write_config_word(hose, 0, 0, pci_x_cmd, cmd); 478 } else { 479 early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); 480 } 481 } 482 483 void fsl_pcibios_fixup_bus(struct pci_bus *bus) 484 { 485 struct pci_controller *hose = pci_bus_to_host(bus); 486 int i, is_pcie = 0, no_link; 487 488 /* The root complex bridge comes up with bogus resources, 489 * we copy the PHB ones in. 490 * 491 * With the current generic PCI code, the PHB bus no longer 492 * has bus->resource[0..4] set, so things are a bit more 493 * tricky. 494 */ 495 496 if (fsl_pcie_bus_fixup) 497 is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP); 498 no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK); 499 500 if (bus->parent == hose->bus && (is_pcie || no_link)) { 501 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) { 502 struct resource *res = bus->resource[i]; 503 struct resource *par; 504 505 if (!res) 506 continue; 507 if (i == 0) 508 par = &hose->io_resource; 509 else if (i < 4) 510 par = &hose->mem_resources[i-1]; 511 else par = NULL; 512 513 res->start = par ? par->start : 0; 514 res->end = par ? par->end : 0; 515 res->flags = par ? par->flags : 0; 516 } 517 } 518 } 519 520 int fsl_add_bridge(struct platform_device *pdev, int is_primary) 521 { 522 int len; 523 struct pci_controller *hose; 524 struct resource rsrc; 525 const int *bus_range; 526 u8 hdr_type, progif; 527 struct device_node *dev; 528 struct ccsr_pci __iomem *pci; 529 u16 temp; 530 u32 svr = mfspr(SPRN_SVR); 531 532 dev = pdev->dev.of_node; 533 534 if (!of_device_is_available(dev)) { 535 pr_warn("%pOF: disabled\n", dev); 536 return -ENODEV; 537 } 538 539 pr_debug("Adding PCI host bridge %pOF\n", dev); 540 541 /* Fetch host bridge registers address */ 542 if (of_address_to_resource(dev, 0, &rsrc)) { 543 printk(KERN_WARNING "Can't get pci register base!"); 544 return -ENOMEM; 545 } 546 547 /* Get bus range if any */ 548 bus_range = of_get_property(dev, "bus-range", &len); 549 if (bus_range == NULL || len < 2 * sizeof(int)) 550 printk(KERN_WARNING "Can't get bus-range for %pOF, assume" 551 " bus 0\n", dev); 552 553 pci_add_flags(PCI_REASSIGN_ALL_BUS); 554 hose = pcibios_alloc_controller(dev); 555 if (!hose) 556 return -ENOMEM; 557 558 /* set platform device as the parent */ 559 hose->parent = &pdev->dev; 560 hose->first_busno = bus_range ? bus_range[0] : 0x0; 561 hose->last_busno = bus_range ? bus_range[1] : 0xff; 562 563 pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n", 564 (u64)rsrc.start, (u64)resource_size(&rsrc)); 565 566 pci = hose->private_data = ioremap(rsrc.start, resource_size(&rsrc)); 567 if (!hose->private_data) 568 goto no_bridge; 569 570 setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, 571 PPC_INDIRECT_TYPE_BIG_ENDIAN); 572 573 if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0) 574 hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK; 575 576 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { 577 /* use fsl_indirect_read_config for PCIe */ 578 hose->ops = &fsl_indirect_pcie_ops; 579 /* For PCIE read HEADER_TYPE to identify controller mode */ 580 early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type); 581 if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) 582 goto no_bridge; 583 584 } else { 585 /* For PCI read PROG to identify controller mode */ 586 early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif); 587 if ((progif & 1) && 588 !of_property_read_bool(dev, "fsl,pci-agent-force-enum")) 589 goto no_bridge; 590 } 591 592 setup_pci_cmd(hose); 593 594 /* check PCI express link status */ 595 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { 596 hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG | 597 PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; 598 if (fsl_pcie_check_link(hose)) 599 hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; 600 } else { 601 /* 602 * Set PBFR(PCI Bus Function Register)[10] = 1 to 603 * disable the combining of crossing cacheline 604 * boundary requests into one burst transaction. 605 * PCI-X operation is not affected. 606 * Fix erratum PCI 5 on MPC8548 607 */ 608 #define PCI_BUS_FUNCTION 0x44 609 #define PCI_BUS_FUNCTION_MDS 0x400 /* Master disable streaming */ 610 if (((SVR_SOC_VER(svr) == SVR_8543) || 611 (SVR_SOC_VER(svr) == SVR_8545) || 612 (SVR_SOC_VER(svr) == SVR_8547) || 613 (SVR_SOC_VER(svr) == SVR_8548)) && 614 !early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX)) { 615 early_read_config_word(hose, 0, 0, 616 PCI_BUS_FUNCTION, &temp); 617 temp |= PCI_BUS_FUNCTION_MDS; 618 early_write_config_word(hose, 0, 0, 619 PCI_BUS_FUNCTION, temp); 620 } 621 } 622 623 printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " 624 "Firmware bus number: %d->%d\n", 625 (unsigned long long)rsrc.start, hose->first_busno, 626 hose->last_busno); 627 628 pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", 629 hose, hose->cfg_addr, hose->cfg_data); 630 631 /* Interpret the "ranges" property */ 632 /* This also maps the I/O region and sets isa_io/mem_base */ 633 pci_process_bridge_OF_ranges(hose, dev, is_primary); 634 635 /* Setup PEX window registers */ 636 setup_pci_atmu(hose); 637 638 /* Set up controller operations */ 639 setup_swiotlb_ops(hose); 640 641 return 0; 642 643 no_bridge: 644 iounmap(hose->private_data); 645 /* unmap cfg_data & cfg_addr separately if not on same page */ 646 if (((unsigned long)hose->cfg_data & PAGE_MASK) != 647 ((unsigned long)hose->cfg_addr & PAGE_MASK)) 648 iounmap(hose->cfg_data); 649 iounmap(hose->cfg_addr); 650 pcibios_free_controller(hose); 651 return -ENODEV; 652 } 653 #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ 654 655 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, 656 quirk_fsl_pcie_early); 657 658 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) 659 struct mpc83xx_pcie_priv { 660 void __iomem *cfg_type0; 661 void __iomem *cfg_type1; 662 u32 dev_base; 663 }; 664 665 struct pex_inbound_window { 666 u32 ar; 667 u32 tar; 668 u32 barl; 669 u32 barh; 670 }; 671 672 /* 673 * With the convention of u-boot, the PCIE outbound window 0 serves 674 * as configuration transactions outbound. 675 */ 676 #define PEX_OUTWIN0_BAR 0xCA4 677 #define PEX_OUTWIN0_TAL 0xCA8 678 #define PEX_OUTWIN0_TAH 0xCAC 679 #define PEX_RC_INWIN_BASE 0xE60 680 #define PEX_RCIWARn_EN 0x1 681 682 static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn) 683 { 684 struct pci_controller *hose = pci_bus_to_host(bus); 685 686 if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) 687 return PCIBIOS_DEVICE_NOT_FOUND; 688 /* 689 * Workaround for the HW bug: for Type 0 configure transactions the 690 * PCI-E controller does not check the device number bits and just 691 * assumes that the device number bits are 0. 692 */ 693 if (bus->number == hose->first_busno || 694 bus->primary == hose->first_busno) { 695 if (devfn & 0xf8) 696 return PCIBIOS_DEVICE_NOT_FOUND; 697 } 698 699 if (ppc_md.pci_exclude_device) { 700 if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) 701 return PCIBIOS_DEVICE_NOT_FOUND; 702 } 703 704 return PCIBIOS_SUCCESSFUL; 705 } 706 707 static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus, 708 unsigned int devfn, int offset) 709 { 710 struct pci_controller *hose = pci_bus_to_host(bus); 711 struct mpc83xx_pcie_priv *pcie = hose->dn->data; 712 u32 dev_base = bus->number << 24 | devfn << 16; 713 int ret; 714 715 ret = mpc83xx_pcie_exclude_device(bus, devfn); 716 if (ret) 717 return NULL; 718 719 offset &= 0xfff; 720 721 /* Type 0 */ 722 if (bus->number == hose->first_busno) 723 return pcie->cfg_type0 + offset; 724 725 if (pcie->dev_base == dev_base) 726 goto mapped; 727 728 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base); 729 730 pcie->dev_base = dev_base; 731 mapped: 732 return pcie->cfg_type1 + offset; 733 } 734 735 static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, 736 int offset, int len, u32 val) 737 { 738 struct pci_controller *hose = pci_bus_to_host(bus); 739 740 /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */ 741 if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno) 742 val &= 0xffffff00; 743 744 return pci_generic_config_write(bus, devfn, offset, len, val); 745 } 746 747 static struct pci_ops mpc83xx_pcie_ops = { 748 .map_bus = mpc83xx_pcie_remap_cfg, 749 .read = pci_generic_config_read, 750 .write = mpc83xx_pcie_write_config, 751 }; 752 753 static int __init mpc83xx_pcie_setup(struct pci_controller *hose, 754 struct resource *reg) 755 { 756 struct mpc83xx_pcie_priv *pcie; 757 u32 cfg_bar; 758 int ret = -ENOMEM; 759 760 pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL); 761 if (!pcie) 762 return ret; 763 764 pcie->cfg_type0 = ioremap(reg->start, resource_size(reg)); 765 if (!pcie->cfg_type0) 766 goto err0; 767 768 cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR); 769 if (!cfg_bar) { 770 /* PCI-E isn't configured. */ 771 ret = -ENODEV; 772 goto err1; 773 } 774 775 pcie->cfg_type1 = ioremap(cfg_bar, 0x1000); 776 if (!pcie->cfg_type1) 777 goto err1; 778 779 WARN_ON(hose->dn->data); 780 hose->dn->data = pcie; 781 hose->ops = &mpc83xx_pcie_ops; 782 hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK; 783 784 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0); 785 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0); 786 787 if (fsl_pcie_check_link(hose)) 788 hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; 789 790 return 0; 791 err1: 792 iounmap(pcie->cfg_type0); 793 err0: 794 kfree(pcie); 795 return ret; 796 797 } 798 799 int __init mpc83xx_add_bridge(struct device_node *dev) 800 { 801 int ret; 802 int len; 803 struct pci_controller *hose; 804 struct resource rsrc_reg; 805 struct resource rsrc_cfg; 806 const int *bus_range; 807 int primary; 808 809 is_mpc83xx_pci = 1; 810 811 if (!of_device_is_available(dev)) { 812 pr_warn("%pOF: disabled by the firmware.\n", 813 dev); 814 return -ENODEV; 815 } 816 pr_debug("Adding PCI host bridge %pOF\n", dev); 817 818 /* Fetch host bridge registers address */ 819 if (of_address_to_resource(dev, 0, &rsrc_reg)) { 820 printk(KERN_WARNING "Can't get pci register base!\n"); 821 return -ENOMEM; 822 } 823 824 memset(&rsrc_cfg, 0, sizeof(rsrc_cfg)); 825 826 if (of_address_to_resource(dev, 1, &rsrc_cfg)) { 827 printk(KERN_WARNING 828 "No pci config register base in dev tree, " 829 "using default\n"); 830 /* 831 * MPC83xx supports up to two host controllers 832 * one at 0x8500 has config space registers at 0x8300 833 * one at 0x8600 has config space registers at 0x8380 834 */ 835 if ((rsrc_reg.start & 0xfffff) == 0x8500) 836 rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300; 837 else if ((rsrc_reg.start & 0xfffff) == 0x8600) 838 rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380; 839 } 840 /* 841 * Controller at offset 0x8500 is primary 842 */ 843 if ((rsrc_reg.start & 0xfffff) == 0x8500) 844 primary = 1; 845 else 846 primary = 0; 847 848 /* Get bus range if any */ 849 bus_range = of_get_property(dev, "bus-range", &len); 850 if (bus_range == NULL || len < 2 * sizeof(int)) { 851 printk(KERN_WARNING "Can't get bus-range for %pOF, assume" 852 " bus 0\n", dev); 853 } 854 855 pci_add_flags(PCI_REASSIGN_ALL_BUS); 856 hose = pcibios_alloc_controller(dev); 857 if (!hose) 858 return -ENOMEM; 859 860 hose->first_busno = bus_range ? bus_range[0] : 0; 861 hose->last_busno = bus_range ? bus_range[1] : 0xff; 862 863 if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) { 864 ret = mpc83xx_pcie_setup(hose, &rsrc_reg); 865 if (ret) 866 goto err0; 867 } else { 868 setup_indirect_pci(hose, rsrc_cfg.start, 869 rsrc_cfg.start + 4, 0); 870 } 871 872 printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " 873 "Firmware bus number: %d->%d\n", 874 (unsigned long long)rsrc_reg.start, hose->first_busno, 875 hose->last_busno); 876 877 pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", 878 hose, hose->cfg_addr, hose->cfg_data); 879 880 /* Interpret the "ranges" property */ 881 /* This also maps the I/O region and sets isa_io/mem_base */ 882 pci_process_bridge_OF_ranges(hose, dev, primary); 883 884 return 0; 885 err0: 886 pcibios_free_controller(hose); 887 return ret; 888 } 889 #endif /* CONFIG_PPC_83xx */ 890 891 u64 fsl_pci_immrbar_base(struct pci_controller *hose) 892 { 893 #ifdef CONFIG_PPC_83xx 894 if (is_mpc83xx_pci) { 895 struct mpc83xx_pcie_priv *pcie = hose->dn->data; 896 struct pex_inbound_window *in; 897 int i; 898 899 /* Walk the Root Complex Inbound windows to match IMMR base */ 900 in = pcie->cfg_type0 + PEX_RC_INWIN_BASE; 901 for (i = 0; i < 4; i++) { 902 /* not enabled, skip */ 903 if (!(in_le32(&in[i].ar) & PEX_RCIWARn_EN)) 904 continue; 905 906 if (get_immrbase() == in_le32(&in[i].tar)) 907 return (u64)in_le32(&in[i].barh) << 32 | 908 in_le32(&in[i].barl); 909 } 910 911 printk(KERN_WARNING "could not find PCI BAR matching IMMR\n"); 912 } 913 #endif 914 915 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) 916 if (!is_mpc83xx_pci) { 917 u32 base; 918 919 pci_bus_read_config_dword(hose->bus, 920 PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base); 921 922 /* 923 * For PEXCSRBAR, bit 3-0 indicate prefetchable and 924 * address type. So when getting base address, these 925 * bits should be masked 926 */ 927 base &= PCI_BASE_ADDRESS_MEM_MASK; 928 929 return base; 930 } 931 #endif 932 933 return 0; 934 } 935 936 #ifdef CONFIG_E500 937 static int mcheck_handle_load(struct pt_regs *regs, u32 inst) 938 { 939 unsigned int rd, ra, rb, d; 940 941 rd = get_rt(inst); 942 ra = get_ra(inst); 943 rb = get_rb(inst); 944 d = get_d(inst); 945 946 switch (get_op(inst)) { 947 case 31: 948 switch (get_xop(inst)) { 949 case OP_31_XOP_LWZX: 950 case OP_31_XOP_LWBRX: 951 regs->gpr[rd] = 0xffffffff; 952 break; 953 954 case OP_31_XOP_LWZUX: 955 regs->gpr[rd] = 0xffffffff; 956 regs->gpr[ra] += regs->gpr[rb]; 957 break; 958 959 case OP_31_XOP_LBZX: 960 regs->gpr[rd] = 0xff; 961 break; 962 963 case OP_31_XOP_LBZUX: 964 regs->gpr[rd] = 0xff; 965 regs->gpr[ra] += regs->gpr[rb]; 966 break; 967 968 case OP_31_XOP_LHZX: 969 case OP_31_XOP_LHBRX: 970 regs->gpr[rd] = 0xffff; 971 break; 972 973 case OP_31_XOP_LHZUX: 974 regs->gpr[rd] = 0xffff; 975 regs->gpr[ra] += regs->gpr[rb]; 976 break; 977 978 case OP_31_XOP_LHAX: 979 regs->gpr[rd] = ~0UL; 980 break; 981 982 case OP_31_XOP_LHAUX: 983 regs->gpr[rd] = ~0UL; 984 regs->gpr[ra] += regs->gpr[rb]; 985 break; 986 987 default: 988 return 0; 989 } 990 break; 991 992 case OP_LWZ: 993 regs->gpr[rd] = 0xffffffff; 994 break; 995 996 case OP_LWZU: 997 regs->gpr[rd] = 0xffffffff; 998 regs->gpr[ra] += (s16)d; 999 break; 1000 1001 case OP_LBZ: 1002 regs->gpr[rd] = 0xff; 1003 break; 1004 1005 case OP_LBZU: 1006 regs->gpr[rd] = 0xff; 1007 regs->gpr[ra] += (s16)d; 1008 break; 1009 1010 case OP_LHZ: 1011 regs->gpr[rd] = 0xffff; 1012 break; 1013 1014 case OP_LHZU: 1015 regs->gpr[rd] = 0xffff; 1016 regs->gpr[ra] += (s16)d; 1017 break; 1018 1019 case OP_LHA: 1020 regs->gpr[rd] = ~0UL; 1021 break; 1022 1023 case OP_LHAU: 1024 regs->gpr[rd] = ~0UL; 1025 regs->gpr[ra] += (s16)d; 1026 break; 1027 1028 default: 1029 return 0; 1030 } 1031 1032 return 1; 1033 } 1034 1035 static int is_in_pci_mem_space(phys_addr_t addr) 1036 { 1037 struct pci_controller *hose; 1038 struct resource *res; 1039 int i; 1040 1041 list_for_each_entry(hose, &hose_list, list_node) { 1042 if (!(hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)) 1043 continue; 1044 1045 for (i = 0; i < 3; i++) { 1046 res = &hose->mem_resources[i]; 1047 if ((res->flags & IORESOURCE_MEM) && 1048 addr >= res->start && addr <= res->end) 1049 return 1; 1050 } 1051 } 1052 return 0; 1053 } 1054 1055 int fsl_pci_mcheck_exception(struct pt_regs *regs) 1056 { 1057 u32 inst; 1058 int ret; 1059 phys_addr_t addr = 0; 1060 1061 /* Let KVM/QEMU deal with the exception */ 1062 if (regs->msr & MSR_GS) 1063 return 0; 1064 1065 #ifdef CONFIG_PHYS_64BIT 1066 addr = mfspr(SPRN_MCARU); 1067 addr <<= 32; 1068 #endif 1069 addr += mfspr(SPRN_MCAR); 1070 1071 if (is_in_pci_mem_space(addr)) { 1072 if (user_mode(regs)) { 1073 pagefault_disable(); 1074 ret = get_user(inst, (__u32 __user *)regs->nip); 1075 pagefault_enable(); 1076 } else { 1077 ret = probe_kernel_address((void *)regs->nip, inst); 1078 } 1079 1080 if (!ret && mcheck_handle_load(regs, inst)) { 1081 regs->nip += 4; 1082 return 1; 1083 } 1084 } 1085 1086 return 0; 1087 } 1088 #endif 1089 1090 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) 1091 static const struct of_device_id pci_ids[] = { 1092 { .compatible = "fsl,mpc8540-pci", }, 1093 { .compatible = "fsl,mpc8548-pcie", }, 1094 { .compatible = "fsl,mpc8610-pci", }, 1095 { .compatible = "fsl,mpc8641-pcie", }, 1096 { .compatible = "fsl,qoriq-pcie", }, 1097 { .compatible = "fsl,qoriq-pcie-v2.1", }, 1098 { .compatible = "fsl,qoriq-pcie-v2.2", }, 1099 { .compatible = "fsl,qoriq-pcie-v2.3", }, 1100 { .compatible = "fsl,qoriq-pcie-v2.4", }, 1101 { .compatible = "fsl,qoriq-pcie-v3.0", }, 1102 1103 /* 1104 * The following entries are for compatibility with older device 1105 * trees. 1106 */ 1107 { .compatible = "fsl,p1022-pcie", }, 1108 { .compatible = "fsl,p4080-pcie", }, 1109 1110 {}, 1111 }; 1112 1113 struct device_node *fsl_pci_primary; 1114 1115 void fsl_pci_assign_primary(void) 1116 { 1117 struct device_node *np; 1118 1119 /* Callers can specify the primary bus using other means. */ 1120 if (fsl_pci_primary) 1121 return; 1122 1123 /* If a PCI host bridge contains an ISA node, it's primary. */ 1124 np = of_find_node_by_type(NULL, "isa"); 1125 while ((fsl_pci_primary = of_get_parent(np))) { 1126 of_node_put(np); 1127 np = fsl_pci_primary; 1128 1129 if (of_match_node(pci_ids, np) && of_device_is_available(np)) 1130 return; 1131 } 1132 1133 /* 1134 * If there's no PCI host bridge with ISA, arbitrarily 1135 * designate one as primary. This can go away once 1136 * various bugs with primary-less systems are fixed. 1137 */ 1138 for_each_matching_node(np, pci_ids) { 1139 if (of_device_is_available(np)) { 1140 fsl_pci_primary = np; 1141 of_node_put(np); 1142 return; 1143 } 1144 } 1145 } 1146 1147 #ifdef CONFIG_PM_SLEEP 1148 static irqreturn_t fsl_pci_pme_handle(int irq, void *dev_id) 1149 { 1150 struct pci_controller *hose = dev_id; 1151 struct ccsr_pci __iomem *pci = hose->private_data; 1152 u32 dr; 1153 1154 dr = in_be32(&pci->pex_pme_mes_dr); 1155 if (!dr) 1156 return IRQ_NONE; 1157 1158 out_be32(&pci->pex_pme_mes_dr, dr); 1159 1160 return IRQ_HANDLED; 1161 } 1162 1163 static int fsl_pci_pme_probe(struct pci_controller *hose) 1164 { 1165 struct ccsr_pci __iomem *pci; 1166 struct pci_dev *dev; 1167 int pme_irq; 1168 int res; 1169 u16 pms; 1170 1171 /* Get hose's pci_dev */ 1172 dev = list_first_entry(&hose->bus->devices, typeof(*dev), bus_list); 1173 1174 /* PME Disable */ 1175 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pms); 1176 pms &= ~PCI_PM_CTRL_PME_ENABLE; 1177 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pms); 1178 1179 pme_irq = irq_of_parse_and_map(hose->dn, 0); 1180 if (!pme_irq) { 1181 dev_err(&dev->dev, "Failed to map PME interrupt.\n"); 1182 1183 return -ENXIO; 1184 } 1185 1186 res = devm_request_irq(hose->parent, pme_irq, 1187 fsl_pci_pme_handle, 1188 IRQF_SHARED, 1189 "[PCI] PME", hose); 1190 if (res < 0) { 1191 dev_err(&dev->dev, "Unable to request irq %d for PME\n", pme_irq); 1192 irq_dispose_mapping(pme_irq); 1193 1194 return -ENODEV; 1195 } 1196 1197 pci = hose->private_data; 1198 1199 /* Enable PTOD, ENL23D & EXL23D */ 1200 clrbits32(&pci->pex_pme_mes_disr, 1201 PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D); 1202 1203 out_be32(&pci->pex_pme_mes_ier, 0); 1204 setbits32(&pci->pex_pme_mes_ier, 1205 PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D); 1206 1207 /* PME Enable */ 1208 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pms); 1209 pms |= PCI_PM_CTRL_PME_ENABLE; 1210 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pms); 1211 1212 return 0; 1213 } 1214 1215 static void send_pme_turnoff_message(struct pci_controller *hose) 1216 { 1217 struct ccsr_pci __iomem *pci = hose->private_data; 1218 u32 dr; 1219 int i; 1220 1221 /* Send PME_Turn_Off Message Request */ 1222 setbits32(&pci->pex_pmcr, PEX_PMCR_PTOMR); 1223 1224 /* Wait trun off done */ 1225 for (i = 0; i < 150; i++) { 1226 dr = in_be32(&pci->pex_pme_mes_dr); 1227 if (dr) { 1228 out_be32(&pci->pex_pme_mes_dr, dr); 1229 break; 1230 } 1231 1232 udelay(1000); 1233 } 1234 } 1235 1236 static void fsl_pci_syscore_do_suspend(struct pci_controller *hose) 1237 { 1238 send_pme_turnoff_message(hose); 1239 } 1240 1241 static int fsl_pci_syscore_suspend(void) 1242 { 1243 struct pci_controller *hose, *tmp; 1244 1245 list_for_each_entry_safe(hose, tmp, &hose_list, list_node) 1246 fsl_pci_syscore_do_suspend(hose); 1247 1248 return 0; 1249 } 1250 1251 static void fsl_pci_syscore_do_resume(struct pci_controller *hose) 1252 { 1253 struct ccsr_pci __iomem *pci = hose->private_data; 1254 u32 dr; 1255 int i; 1256 1257 /* Send Exit L2 State Message */ 1258 setbits32(&pci->pex_pmcr, PEX_PMCR_EXL2S); 1259 1260 /* Wait exit done */ 1261 for (i = 0; i < 150; i++) { 1262 dr = in_be32(&pci->pex_pme_mes_dr); 1263 if (dr) { 1264 out_be32(&pci->pex_pme_mes_dr, dr); 1265 break; 1266 } 1267 1268 udelay(1000); 1269 } 1270 1271 setup_pci_atmu(hose); 1272 } 1273 1274 static void fsl_pci_syscore_resume(void) 1275 { 1276 struct pci_controller *hose, *tmp; 1277 1278 list_for_each_entry_safe(hose, tmp, &hose_list, list_node) 1279 fsl_pci_syscore_do_resume(hose); 1280 } 1281 1282 static struct syscore_ops pci_syscore_pm_ops = { 1283 .suspend = fsl_pci_syscore_suspend, 1284 .resume = fsl_pci_syscore_resume, 1285 }; 1286 #endif 1287 1288 void fsl_pcibios_fixup_phb(struct pci_controller *phb) 1289 { 1290 #ifdef CONFIG_PM_SLEEP 1291 fsl_pci_pme_probe(phb); 1292 #endif 1293 } 1294 1295 static int add_err_dev(struct platform_device *pdev) 1296 { 1297 struct platform_device *errdev; 1298 struct mpc85xx_edac_pci_plat_data pd = { 1299 .of_node = pdev->dev.of_node 1300 }; 1301 1302 errdev = platform_device_register_resndata(&pdev->dev, 1303 "mpc85xx-pci-edac", 1304 PLATFORM_DEVID_AUTO, 1305 pdev->resource, 1306 pdev->num_resources, 1307 &pd, sizeof(pd)); 1308 1309 return PTR_ERR_OR_ZERO(errdev); 1310 } 1311 1312 static int fsl_pci_probe(struct platform_device *pdev) 1313 { 1314 struct device_node *node; 1315 int ret; 1316 1317 node = pdev->dev.of_node; 1318 ret = fsl_add_bridge(pdev, fsl_pci_primary == node); 1319 if (ret) 1320 return ret; 1321 1322 ret = add_err_dev(pdev); 1323 if (ret) 1324 dev_err(&pdev->dev, "couldn't register error device: %d\n", 1325 ret); 1326 1327 return 0; 1328 } 1329 1330 static struct platform_driver fsl_pci_driver = { 1331 .driver = { 1332 .name = "fsl-pci", 1333 .of_match_table = pci_ids, 1334 }, 1335 .probe = fsl_pci_probe, 1336 }; 1337 1338 static int __init fsl_pci_init(void) 1339 { 1340 #ifdef CONFIG_PM_SLEEP 1341 register_syscore_ops(&pci_syscore_pm_ops); 1342 #endif 1343 return platform_driver_register(&fsl_pci_driver); 1344 } 1345 arch_initcall(fsl_pci_init); 1346 #endif 1347