1 /* 2 * arch/powerpc/sysdev/dart_iommu.c 3 * 4 * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation 5 * Copyright (C) 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>, 6 * IBM Corporation 7 * 8 * Based on pSeries_iommu.c: 9 * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation 10 * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation 11 * 12 * Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu. 13 * 14 * 15 * This program is free software; you can redistribute it and/or modify 16 * it under the terms of the GNU General Public License as published by 17 * the Free Software Foundation; either version 2 of the License, or 18 * (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 28 */ 29 30 #include <linux/init.h> 31 #include <linux/types.h> 32 #include <linux/mm.h> 33 #include <linux/spinlock.h> 34 #include <linux/string.h> 35 #include <linux/pci.h> 36 #include <linux/dma-mapping.h> 37 #include <linux/vmalloc.h> 38 #include <linux/suspend.h> 39 #include <linux/memblock.h> 40 #include <linux/gfp.h> 41 #include <asm/io.h> 42 #include <asm/prom.h> 43 #include <asm/iommu.h> 44 #include <asm/pci-bridge.h> 45 #include <asm/machdep.h> 46 #include <asm/abs_addr.h> 47 #include <asm/cacheflush.h> 48 #include <asm/ppc-pci.h> 49 50 #include "dart.h" 51 52 /* Physical base address and size of the DART table */ 53 unsigned long dart_tablebase; /* exported to htab_initialize */ 54 static unsigned long dart_tablesize; 55 56 /* Virtual base address of the DART table */ 57 static u32 *dart_vbase; 58 #ifdef CONFIG_PM 59 static u32 *dart_copy; 60 #endif 61 62 /* Mapped base address for the dart */ 63 static unsigned int __iomem *dart; 64 65 /* Dummy val that entries are set to when unused */ 66 static unsigned int dart_emptyval; 67 68 static struct iommu_table iommu_table_dart; 69 static int iommu_table_dart_inited; 70 static int dart_dirty; 71 static int dart_is_u4; 72 73 #define DART_U4_BYPASS_BASE 0x8000000000ull 74 75 #define DBG(...) 76 77 static inline void dart_tlb_invalidate_all(void) 78 { 79 unsigned long l = 0; 80 unsigned int reg, inv_bit; 81 unsigned long limit; 82 83 DBG("dart: flush\n"); 84 85 /* To invalidate the DART, set the DARTCNTL_FLUSHTLB bit in the 86 * control register and wait for it to clear. 87 * 88 * Gotcha: Sometimes, the DART won't detect that the bit gets 89 * set. If so, clear it and set it again. 90 */ 91 92 limit = 0; 93 94 inv_bit = dart_is_u4 ? DART_CNTL_U4_FLUSHTLB : DART_CNTL_U3_FLUSHTLB; 95 retry: 96 l = 0; 97 reg = DART_IN(DART_CNTL); 98 reg |= inv_bit; 99 DART_OUT(DART_CNTL, reg); 100 101 while ((DART_IN(DART_CNTL) & inv_bit) && l < (1L << limit)) 102 l++; 103 if (l == (1L << limit)) { 104 if (limit < 4) { 105 limit++; 106 reg = DART_IN(DART_CNTL); 107 reg &= ~inv_bit; 108 DART_OUT(DART_CNTL, reg); 109 goto retry; 110 } else 111 panic("DART: TLB did not flush after waiting a long " 112 "time. Buggy U3 ?"); 113 } 114 } 115 116 static inline void dart_tlb_invalidate_one(unsigned long bus_rpn) 117 { 118 unsigned int reg; 119 unsigned int l, limit; 120 121 reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE | 122 (bus_rpn & DART_CNTL_U4_IONE_MASK); 123 DART_OUT(DART_CNTL, reg); 124 125 limit = 0; 126 wait_more: 127 l = 0; 128 while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) { 129 rmb(); 130 l++; 131 } 132 133 if (l == (1L << limit)) { 134 if (limit < 4) { 135 limit++; 136 goto wait_more; 137 } else 138 panic("DART: TLB did not flush after waiting a long " 139 "time. Buggy U4 ?"); 140 } 141 } 142 143 static void dart_flush(struct iommu_table *tbl) 144 { 145 mb(); 146 if (dart_dirty) { 147 dart_tlb_invalidate_all(); 148 dart_dirty = 0; 149 } 150 } 151 152 static int dart_build(struct iommu_table *tbl, long index, 153 long npages, unsigned long uaddr, 154 enum dma_data_direction direction, 155 struct dma_attrs *attrs) 156 { 157 unsigned int *dp; 158 unsigned int rpn; 159 long l; 160 161 DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr); 162 163 dp = ((unsigned int*)tbl->it_base) + index; 164 165 /* On U3, all memory is contiguous, so we can move this 166 * out of the loop. 167 */ 168 l = npages; 169 while (l--) { 170 rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT; 171 172 *(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK); 173 174 uaddr += DART_PAGE_SIZE; 175 } 176 177 /* make sure all updates have reached memory */ 178 mb(); 179 in_be32((unsigned __iomem *)dp); 180 mb(); 181 182 if (dart_is_u4) { 183 rpn = index; 184 while (npages--) 185 dart_tlb_invalidate_one(rpn++); 186 } else { 187 dart_dirty = 1; 188 } 189 return 0; 190 } 191 192 193 static void dart_free(struct iommu_table *tbl, long index, long npages) 194 { 195 unsigned int *dp; 196 197 /* We don't worry about flushing the TLB cache. The only drawback of 198 * not doing it is that we won't catch buggy device drivers doing 199 * bad DMAs, but then no 32-bit architecture ever does either. 200 */ 201 202 DBG("dart: free at: %lx, %lx\n", index, npages); 203 204 dp = ((unsigned int *)tbl->it_base) + index; 205 206 while (npages--) 207 *(dp++) = dart_emptyval; 208 } 209 210 211 static int __init dart_init(struct device_node *dart_node) 212 { 213 unsigned int i; 214 unsigned long tmp, base, size; 215 struct resource r; 216 217 if (dart_tablebase == 0 || dart_tablesize == 0) { 218 printk(KERN_INFO "DART: table not allocated, using " 219 "direct DMA\n"); 220 return -ENODEV; 221 } 222 223 if (of_address_to_resource(dart_node, 0, &r)) 224 panic("DART: can't get register base ! "); 225 226 /* Make sure nothing from the DART range remains in the CPU cache 227 * from a previous mapping that existed before the kernel took 228 * over 229 */ 230 flush_dcache_phys_range(dart_tablebase, 231 dart_tablebase + dart_tablesize); 232 233 /* Allocate a spare page to map all invalid DART pages. We need to do 234 * that to work around what looks like a problem with the HT bridge 235 * prefetching into invalid pages and corrupting data 236 */ 237 tmp = memblock_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE); 238 dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) & 239 DARTMAP_RPNMASK); 240 241 /* Map in DART registers */ 242 dart = ioremap(r.start, resource_size(&r)); 243 if (dart == NULL) 244 panic("DART: Cannot map registers!"); 245 246 /* Map in DART table */ 247 dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize); 248 249 /* Fill initial table */ 250 for (i = 0; i < dart_tablesize/4; i++) 251 dart_vbase[i] = dart_emptyval; 252 253 /* Initialize DART with table base and enable it. */ 254 base = dart_tablebase >> DART_PAGE_SHIFT; 255 size = dart_tablesize >> DART_PAGE_SHIFT; 256 if (dart_is_u4) { 257 size &= DART_SIZE_U4_SIZE_MASK; 258 DART_OUT(DART_BASE_U4, base); 259 DART_OUT(DART_SIZE_U4, size); 260 DART_OUT(DART_CNTL, DART_CNTL_U4_ENABLE); 261 } else { 262 size &= DART_CNTL_U3_SIZE_MASK; 263 DART_OUT(DART_CNTL, 264 DART_CNTL_U3_ENABLE | 265 (base << DART_CNTL_U3_BASE_SHIFT) | 266 (size << DART_CNTL_U3_SIZE_SHIFT)); 267 } 268 269 /* Invalidate DART to get rid of possible stale TLBs */ 270 dart_tlb_invalidate_all(); 271 272 printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n", 273 dart_is_u4 ? "U4" : "U3"); 274 275 return 0; 276 } 277 278 static void iommu_table_dart_setup(void) 279 { 280 iommu_table_dart.it_busno = 0; 281 iommu_table_dart.it_offset = 0; 282 /* it_size is in number of entries */ 283 iommu_table_dart.it_size = dart_tablesize / sizeof(u32); 284 285 /* Initialize the common IOMMU code */ 286 iommu_table_dart.it_base = (unsigned long)dart_vbase; 287 iommu_table_dart.it_index = 0; 288 iommu_table_dart.it_blocksize = 1; 289 iommu_init_table(&iommu_table_dart, -1); 290 291 /* Reserve the last page of the DART to avoid possible prefetch 292 * past the DART mapped area 293 */ 294 set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map); 295 } 296 297 static void dma_dev_setup_dart(struct device *dev) 298 { 299 /* We only have one iommu table on the mac for now, which makes 300 * things simple. Setup all PCI devices to point to this table 301 */ 302 if (get_dma_ops(dev) == &dma_direct_ops) 303 set_dma_offset(dev, DART_U4_BYPASS_BASE); 304 else 305 set_iommu_table_base(dev, &iommu_table_dart); 306 } 307 308 static void pci_dma_dev_setup_dart(struct pci_dev *dev) 309 { 310 dma_dev_setup_dart(&dev->dev); 311 } 312 313 static void pci_dma_bus_setup_dart(struct pci_bus *bus) 314 { 315 if (!iommu_table_dart_inited) { 316 iommu_table_dart_inited = 1; 317 iommu_table_dart_setup(); 318 } 319 } 320 321 static bool dart_device_on_pcie(struct device *dev) 322 { 323 struct device_node *np = of_node_get(dev->of_node); 324 325 while(np) { 326 if (of_device_is_compatible(np, "U4-pcie") || 327 of_device_is_compatible(np, "u4-pcie")) { 328 of_node_put(np); 329 return true; 330 } 331 np = of_get_next_parent(np); 332 } 333 return false; 334 } 335 336 static int dart_dma_set_mask(struct device *dev, u64 dma_mask) 337 { 338 if (!dev->dma_mask || !dma_supported(dev, dma_mask)) 339 return -EIO; 340 341 /* U4 supports a DART bypass, we use it for 64-bit capable 342 * devices to improve performances. However, that only works 343 * for devices connected to U4 own PCIe interface, not bridged 344 * through hypertransport. We need the device to support at 345 * least 40 bits of addresses. 346 */ 347 if (dart_device_on_pcie(dev) && dma_mask >= DMA_BIT_MASK(40)) { 348 dev_info(dev, "Using 64-bit DMA iommu bypass\n"); 349 set_dma_ops(dev, &dma_direct_ops); 350 } else { 351 dev_info(dev, "Using 32-bit DMA via iommu\n"); 352 set_dma_ops(dev, &dma_iommu_ops); 353 } 354 dma_dev_setup_dart(dev); 355 356 *dev->dma_mask = dma_mask; 357 return 0; 358 } 359 360 void __init iommu_init_early_dart(void) 361 { 362 struct device_node *dn; 363 364 /* Find the DART in the device-tree */ 365 dn = of_find_compatible_node(NULL, "dart", "u3-dart"); 366 if (dn == NULL) { 367 dn = of_find_compatible_node(NULL, "dart", "u4-dart"); 368 if (dn == NULL) 369 return; /* use default direct_dma_ops */ 370 dart_is_u4 = 1; 371 } 372 373 /* Initialize the DART HW */ 374 if (dart_init(dn) != 0) 375 goto bail; 376 377 /* Setup low level TCE operations for the core IOMMU code */ 378 ppc_md.tce_build = dart_build; 379 ppc_md.tce_free = dart_free; 380 ppc_md.tce_flush = dart_flush; 381 382 /* Setup bypass if supported */ 383 if (dart_is_u4) 384 ppc_md.dma_set_mask = dart_dma_set_mask; 385 386 ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_dart; 387 ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_dart; 388 389 /* Setup pci_dma ops */ 390 set_pci_dma_ops(&dma_iommu_ops); 391 return; 392 393 bail: 394 /* If init failed, use direct iommu and null setup functions */ 395 ppc_md.pci_dma_dev_setup = NULL; 396 ppc_md.pci_dma_bus_setup = NULL; 397 398 /* Setup pci_dma ops */ 399 set_pci_dma_ops(&dma_direct_ops); 400 } 401 402 #ifdef CONFIG_PM 403 static void iommu_dart_save(void) 404 { 405 memcpy(dart_copy, dart_vbase, 2*1024*1024); 406 } 407 408 static void iommu_dart_restore(void) 409 { 410 memcpy(dart_vbase, dart_copy, 2*1024*1024); 411 dart_tlb_invalidate_all(); 412 } 413 414 static int __init iommu_init_late_dart(void) 415 { 416 unsigned long tbasepfn; 417 struct page *p; 418 419 /* if no dart table exists then we won't need to save it 420 * and the area has also not been reserved */ 421 if (!dart_tablebase) 422 return 0; 423 424 tbasepfn = __pa(dart_tablebase) >> PAGE_SHIFT; 425 register_nosave_region_late(tbasepfn, 426 tbasepfn + ((1<<24) >> PAGE_SHIFT)); 427 428 /* For suspend we need to copy the dart contents because 429 * it is not part of the regular mapping (see above) and 430 * thus not saved automatically. The memory for this copy 431 * must be allocated early because we need 2 MB. */ 432 p = alloc_pages(GFP_KERNEL, 21 - PAGE_SHIFT); 433 BUG_ON(!p); 434 dart_copy = page_address(p); 435 436 ppc_md.iommu_save = iommu_dart_save; 437 ppc_md.iommu_restore = iommu_dart_restore; 438 439 return 0; 440 } 441 442 late_initcall(iommu_init_late_dart); 443 #endif 444 445 void __init alloc_dart_table(void) 446 { 447 /* Only reserve DART space if machine has more than 1GB of RAM 448 * or if requested with iommu=on on cmdline. 449 * 450 * 1GB of RAM is picked as limit because some default devices 451 * (i.e. Airport Extreme) have 30 bit address range limits. 452 */ 453 454 if (iommu_is_off) 455 return; 456 457 if (!iommu_force_on && memblock_end_of_DRAM() <= 0x40000000ull) 458 return; 459 460 /* 512 pages (2MB) is max DART tablesize. */ 461 dart_tablesize = 1UL << 21; 462 /* 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we 463 * will blow up an entire large page anyway in the kernel mapping 464 */ 465 dart_tablebase = (unsigned long) 466 abs_to_virt(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L)); 467 468 printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase); 469 } 470