1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * arch/powerpc/sysdev/dart_iommu.c
4 *
5 * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
6 * Copyright (C) 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>,
7 * IBM Corporation
8 *
9 * Based on pSeries_iommu.c:
10 * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
11 * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
12 *
13 * Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu.
14 */
15
16 #include <linux/init.h>
17 #include <linux/types.h>
18 #include <linux/mm.h>
19 #include <linux/spinlock.h>
20 #include <linux/string.h>
21 #include <linux/pci.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/vmalloc.h>
24 #include <linux/suspend.h>
25 #include <linux/memblock.h>
26 #include <linux/gfp.h>
27 #include <linux/kmemleak.h>
28 #include <linux/of_address.h>
29 #include <asm/io.h>
30 #include <asm/iommu.h>
31 #include <asm/pci-bridge.h>
32 #include <asm/machdep.h>
33 #include <asm/cacheflush.h>
34 #include <asm/ppc-pci.h>
35
36 #include "dart.h"
37
38 /* DART table address and size */
39 static u32 *dart_tablebase;
40 static unsigned long dart_tablesize;
41
42 /* Mapped base address for the dart */
43 static unsigned int __iomem *dart;
44
45 /* Dummy val that entries are set to when unused */
46 static unsigned int dart_emptyval;
47
48 static struct iommu_table iommu_table_dart;
49 static int iommu_table_dart_inited;
50 static int dart_dirty;
51 static int dart_is_u4;
52
53 #define DART_U4_BYPASS_BASE 0x8000000000ull
54
55 #define DBG(...)
56
57 static DEFINE_SPINLOCK(invalidate_lock);
58
dart_tlb_invalidate_all(void)59 static inline void dart_tlb_invalidate_all(void)
60 {
61 unsigned long l = 0;
62 unsigned int reg, inv_bit;
63 unsigned long limit;
64 unsigned long flags;
65
66 spin_lock_irqsave(&invalidate_lock, flags);
67
68 DBG("dart: flush\n");
69
70 /* To invalidate the DART, set the DARTCNTL_FLUSHTLB bit in the
71 * control register and wait for it to clear.
72 *
73 * Gotcha: Sometimes, the DART won't detect that the bit gets
74 * set. If so, clear it and set it again.
75 */
76
77 limit = 0;
78
79 inv_bit = dart_is_u4 ? DART_CNTL_U4_FLUSHTLB : DART_CNTL_U3_FLUSHTLB;
80 retry:
81 l = 0;
82 reg = DART_IN(DART_CNTL);
83 reg |= inv_bit;
84 DART_OUT(DART_CNTL, reg);
85
86 while ((DART_IN(DART_CNTL) & inv_bit) && l < (1L << limit))
87 l++;
88 if (l == (1L << limit)) {
89 if (limit < 4) {
90 limit++;
91 reg = DART_IN(DART_CNTL);
92 reg &= ~inv_bit;
93 DART_OUT(DART_CNTL, reg);
94 goto retry;
95 } else
96 panic("DART: TLB did not flush after waiting a long "
97 "time. Buggy U3 ?");
98 }
99
100 spin_unlock_irqrestore(&invalidate_lock, flags);
101 }
102
dart_tlb_invalidate_one(unsigned long bus_rpn)103 static inline void dart_tlb_invalidate_one(unsigned long bus_rpn)
104 {
105 unsigned int reg;
106 unsigned int l, limit;
107 unsigned long flags;
108
109 spin_lock_irqsave(&invalidate_lock, flags);
110
111 reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE |
112 (bus_rpn & DART_CNTL_U4_IONE_MASK);
113 DART_OUT(DART_CNTL, reg);
114
115 limit = 0;
116 wait_more:
117 l = 0;
118 while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) {
119 rmb();
120 l++;
121 }
122
123 if (l == (1L << limit)) {
124 if (limit < 4) {
125 limit++;
126 goto wait_more;
127 } else
128 panic("DART: TLB did not flush after waiting a long "
129 "time. Buggy U4 ?");
130 }
131
132 spin_unlock_irqrestore(&invalidate_lock, flags);
133 }
134
dart_cache_sync(unsigned int * base,unsigned int count)135 static void dart_cache_sync(unsigned int *base, unsigned int count)
136 {
137 /*
138 * We add 1 to the number of entries to flush, following a
139 * comment in Darwin indicating that the memory controller
140 * can prefetch unmapped memory under some circumstances.
141 */
142 unsigned long start = (unsigned long)base;
143 unsigned long end = start + (count + 1) * sizeof(unsigned int);
144 unsigned int tmp;
145
146 /* Perform a standard cache flush */
147 flush_dcache_range(start, end);
148
149 /*
150 * Perform the sequence described in the CPC925 manual to
151 * ensure all the data gets to a point the cache incoherent
152 * DART hardware will see.
153 */
154 asm volatile(" sync;"
155 " isync;"
156 " dcbf 0,%1;"
157 " sync;"
158 " isync;"
159 " lwz %0,0(%1);"
160 " isync" : "=r" (tmp) : "r" (end) : "memory");
161 }
162
dart_flush(struct iommu_table * tbl)163 static void dart_flush(struct iommu_table *tbl)
164 {
165 mb();
166 if (dart_dirty) {
167 dart_tlb_invalidate_all();
168 dart_dirty = 0;
169 }
170 }
171
dart_build(struct iommu_table * tbl,long index,long npages,unsigned long uaddr,enum dma_data_direction direction,unsigned long attrs)172 static int dart_build(struct iommu_table *tbl, long index,
173 long npages, unsigned long uaddr,
174 enum dma_data_direction direction,
175 unsigned long attrs)
176 {
177 unsigned int *dp, *orig_dp;
178 unsigned int rpn;
179 long l;
180
181 DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);
182
183 orig_dp = dp = ((unsigned int*)tbl->it_base) + index;
184
185 /* On U3, all memory is contiguous, so we can move this
186 * out of the loop.
187 */
188 l = npages;
189 while (l--) {
190 rpn = __pa(uaddr) >> DART_PAGE_SHIFT;
191
192 *(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
193
194 uaddr += DART_PAGE_SIZE;
195 }
196 dart_cache_sync(orig_dp, npages);
197
198 if (dart_is_u4) {
199 rpn = index;
200 while (npages--)
201 dart_tlb_invalidate_one(rpn++);
202 } else {
203 dart_dirty = 1;
204 }
205 return 0;
206 }
207
208
dart_free(struct iommu_table * tbl,long index,long npages)209 static void dart_free(struct iommu_table *tbl, long index, long npages)
210 {
211 unsigned int *dp, *orig_dp;
212 long orig_npages = npages;
213
214 /* We don't worry about flushing the TLB cache. The only drawback of
215 * not doing it is that we won't catch buggy device drivers doing
216 * bad DMAs, but then no 32-bit architecture ever does either.
217 */
218
219 DBG("dart: free at: %lx, %lx\n", index, npages);
220
221 orig_dp = dp = ((unsigned int *)tbl->it_base) + index;
222
223 while (npages--)
224 *(dp++) = dart_emptyval;
225
226 dart_cache_sync(orig_dp, orig_npages);
227 }
228
allocate_dart(void)229 static void __init allocate_dart(void)
230 {
231 unsigned long tmp;
232
233 /* 512 pages (2MB) is max DART tablesize. */
234 dart_tablesize = 1UL << 21;
235
236 /*
237 * 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we
238 * will blow up an entire large page anyway in the kernel mapping.
239 */
240 dart_tablebase = memblock_alloc_try_nid_raw(SZ_16M, SZ_16M,
241 MEMBLOCK_LOW_LIMIT, SZ_2G,
242 NUMA_NO_NODE);
243 if (!dart_tablebase)
244 panic("Failed to allocate 16MB below 2GB for DART table\n");
245
246 /* There is no point scanning the DART space for leaks*/
247 kmemleak_no_scan((void *)dart_tablebase);
248
249 /* Allocate a spare page to map all invalid DART pages. We need to do
250 * that to work around what looks like a problem with the HT bridge
251 * prefetching into invalid pages and corrupting data
252 */
253 tmp = memblock_phys_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
254 if (!tmp)
255 panic("DART: table allocation failed\n");
256
257 dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
258 DARTMAP_RPNMASK);
259
260 printk(KERN_INFO "DART table allocated at: %p\n", dart_tablebase);
261 }
262
dart_init(struct device_node * dart_node)263 static int __init dart_init(struct device_node *dart_node)
264 {
265 unsigned int i;
266 unsigned long base, size;
267 struct resource r;
268
269 /* IOMMU disabled by the user ? bail out */
270 if (iommu_is_off)
271 return -ENODEV;
272
273 /*
274 * Only use the DART if the machine has more than 1GB of RAM
275 * or if requested with iommu=on on cmdline.
276 *
277 * 1GB of RAM is picked as limit because some default devices
278 * (i.e. Airport Extreme) have 30 bit address range limits.
279 */
280
281 if (!iommu_force_on && memblock_end_of_DRAM() <= 0x40000000ull)
282 return -ENODEV;
283
284 /* Get DART registers */
285 if (of_address_to_resource(dart_node, 0, &r))
286 panic("DART: can't get register base ! ");
287
288 /* Map in DART registers */
289 dart = ioremap(r.start, resource_size(&r));
290 if (dart == NULL)
291 panic("DART: Cannot map registers!");
292
293 /* Allocate the DART and dummy page */
294 allocate_dart();
295
296 /* Fill initial table */
297 for (i = 0; i < dart_tablesize/4; i++)
298 dart_tablebase[i] = dart_emptyval;
299
300 /* Push to memory */
301 dart_cache_sync(dart_tablebase, dart_tablesize / sizeof(u32));
302
303 /* Initialize DART with table base and enable it. */
304 base = ((unsigned long)dart_tablebase) >> DART_PAGE_SHIFT;
305 size = dart_tablesize >> DART_PAGE_SHIFT;
306 if (dart_is_u4) {
307 size &= DART_SIZE_U4_SIZE_MASK;
308 DART_OUT(DART_BASE_U4, base);
309 DART_OUT(DART_SIZE_U4, size);
310 DART_OUT(DART_CNTL, DART_CNTL_U4_ENABLE);
311 } else {
312 size &= DART_CNTL_U3_SIZE_MASK;
313 DART_OUT(DART_CNTL,
314 DART_CNTL_U3_ENABLE |
315 (base << DART_CNTL_U3_BASE_SHIFT) |
316 (size << DART_CNTL_U3_SIZE_SHIFT));
317 }
318
319 /* Invalidate DART to get rid of possible stale TLBs */
320 dart_tlb_invalidate_all();
321
322 printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n",
323 dart_is_u4 ? "U4" : "U3");
324
325 return 0;
326 }
327
328 static struct iommu_table_ops iommu_dart_ops = {
329 .set = dart_build,
330 .clear = dart_free,
331 .flush = dart_flush,
332 };
333
iommu_table_dart_setup(void)334 static void iommu_table_dart_setup(void)
335 {
336 iommu_table_dart.it_busno = 0;
337 iommu_table_dart.it_offset = 0;
338 /* it_size is in number of entries */
339 iommu_table_dart.it_size = dart_tablesize / sizeof(u32);
340 iommu_table_dart.it_page_shift = IOMMU_PAGE_SHIFT_4K;
341
342 /* Initialize the common IOMMU code */
343 iommu_table_dart.it_base = (unsigned long)dart_tablebase;
344 iommu_table_dart.it_index = 0;
345 iommu_table_dart.it_blocksize = 1;
346 iommu_table_dart.it_ops = &iommu_dart_ops;
347 if (!iommu_init_table(&iommu_table_dart, -1, 0, 0))
348 panic("Failed to initialize iommu table");
349
350 /* Reserve the last page of the DART to avoid possible prefetch
351 * past the DART mapped area
352 */
353 set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
354 }
355
pci_dma_bus_setup_dart(struct pci_bus * bus)356 static void pci_dma_bus_setup_dart(struct pci_bus *bus)
357 {
358 if (!iommu_table_dart_inited) {
359 iommu_table_dart_inited = 1;
360 iommu_table_dart_setup();
361 }
362 }
363
dart_device_on_pcie(struct device * dev)364 static bool dart_device_on_pcie(struct device *dev)
365 {
366 struct device_node *np = of_node_get(dev->of_node);
367
368 while(np) {
369 if (of_device_is_compatible(np, "U4-pcie") ||
370 of_device_is_compatible(np, "u4-pcie")) {
371 of_node_put(np);
372 return true;
373 }
374 np = of_get_next_parent(np);
375 }
376 return false;
377 }
378
pci_dma_dev_setup_dart(struct pci_dev * dev)379 static void pci_dma_dev_setup_dart(struct pci_dev *dev)
380 {
381 if (dart_is_u4 && dart_device_on_pcie(&dev->dev))
382 dev->dev.archdata.dma_offset = DART_U4_BYPASS_BASE;
383 set_iommu_table_base(&dev->dev, &iommu_table_dart);
384 }
385
iommu_bypass_supported_dart(struct pci_dev * dev,u64 mask)386 static bool iommu_bypass_supported_dart(struct pci_dev *dev, u64 mask)
387 {
388 return dart_is_u4 &&
389 dart_device_on_pcie(&dev->dev) &&
390 mask >= DMA_BIT_MASK(40);
391 }
392
iommu_init_early_dart(struct pci_controller_ops * controller_ops)393 void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
394 {
395 struct device_node *dn;
396
397 /* Find the DART in the device-tree */
398 dn = of_find_compatible_node(NULL, "dart", "u3-dart");
399 if (dn == NULL) {
400 dn = of_find_compatible_node(NULL, "dart", "u4-dart");
401 if (dn == NULL)
402 return; /* use default direct_dma_ops */
403 dart_is_u4 = 1;
404 }
405
406 /* Initialize the DART HW */
407 if (dart_init(dn) != 0) {
408 of_node_put(dn);
409 return;
410 }
411 /*
412 * U4 supports a DART bypass, we use it for 64-bit capable devices to
413 * improve performance. However, that only works for devices connected
414 * to the U4 own PCIe interface, not bridged through hypertransport.
415 * We need the device to support at least 40 bits of addresses.
416 */
417 controller_ops->dma_dev_setup = pci_dma_dev_setup_dart;
418 controller_ops->dma_bus_setup = pci_dma_bus_setup_dart;
419 controller_ops->iommu_bypass_supported = iommu_bypass_supported_dart;
420
421 /* Setup pci_dma ops */
422 set_pci_dma_ops(&dma_iommu_ops);
423 of_node_put(dn);
424 }
425
426 #ifdef CONFIG_PM
iommu_dart_restore(void)427 static void iommu_dart_restore(void)
428 {
429 dart_cache_sync(dart_tablebase, dart_tablesize / sizeof(u32));
430 dart_tlb_invalidate_all();
431 }
432
iommu_init_late_dart(void)433 static int __init iommu_init_late_dart(void)
434 {
435 if (!dart_tablebase)
436 return 0;
437
438 ppc_md.iommu_restore = iommu_dart_restore;
439
440 return 0;
441 }
442
443 late_initcall(iommu_init_late_dart);
444 #endif /* CONFIG_PM */
445