1# SPDX-License-Identifier: GPL-2.0
2config PPC_PSERIES
3	depends on PPC64 && PPC_BOOK3S
4	bool "IBM pSeries & new (POWER5-based) iSeries"
5	select HAVE_PCSPKR_PLATFORM
6	select MPIC
7	select OF_DYNAMIC
8	select FORCE_PCI
9	select PCI_MSI
10	select PPC_XICS
11	select PPC_XIVE_SPAPR
12	select PPC_ICP_NATIVE
13	select PPC_ICP_HV
14	select PPC_ICS_RTAS
15	select PPC_I8259
16	select PPC_RTAS
17	select PPC_RTAS_DAEMON
18	select RTAS_ERROR_LOGGING
19	select PPC_UDBG_16550
20	select PPC_NATIVE
21	select PPC_DOORBELL
22	select HOTPLUG_CPU
23	select ARCH_RANDOM
24	select PPC_DOORBELL
25	select FORCE_SMP
26	select SWIOTLB
27	default y
28
29config PPC_SPLPAR
30	depends on PPC_PSERIES
31	bool "Support for shared-processor logical partitions"
32	help
33	  Enabling this option will make the kernel run more efficiently
34	  on logically-partitioned pSeries systems which use shared
35	  processors, that is, which share physical processors between
36	  two or more partitions.
37
38config DTL
39	bool "Dispatch Trace Log"
40	depends on PPC_SPLPAR && DEBUG_FS
41	help
42	  SPLPAR machines can log hypervisor preempt & dispatch events to a
43	  kernel buffer. Saying Y here will enable logging these events,
44	  which are accessible through a debugfs file.
45
46	  Say N if you are unsure.
47
48config PSERIES_ENERGY
49	tristate "pSeries energy management capabilities driver"
50	depends on PPC_PSERIES
51	default y
52	help
53	  Provides interface to platform energy management capabilities
54	  on supported PSERIES platforms.
55	  Provides: /sys/devices/system/cpu/pseries_(de)activation_hint_list
56	  and /sys/devices/system/cpu/cpuN/pseries_(de)activation_hint
57
58config SCANLOG
59	tristate "Scanlog dump interface"
60	depends on RTAS_PROC && PPC_PSERIES
61
62config IO_EVENT_IRQ
63	bool "IO Event Interrupt support"
64	depends on PPC_PSERIES
65	default y
66	help
67	  Select this option, if you want to enable support for IO Event
68	  interrupts. IO event interrupt is a mechanism provided by RTAS
69	  to return information about hardware error and non-error events
70	  which may need OS attention. RTAS returns events for multiple
71	  event types and scopes. Device drivers can register their handlers
72	  to receive events.
73
74	  This option will only enable the IO event platform code. You
75	  will still need to enable or compile the actual drivers
76	  that use this infrastructure to handle IO event interrupts.
77
78	  Say Y if you are unsure.
79
80config LPARCFG
81	bool "LPAR Configuration Data"
82	depends on PPC_PSERIES
83	help
84	  Provide system capacity information via human readable
85	  <key word>=<value> pairs through a /proc/ppc64/lparcfg interface.
86
87config PPC_PSERIES_DEBUG
88	depends on PPC_PSERIES && PPC_EARLY_DEBUG
89	bool "Enable extra debug logging in platforms/pseries"
90	default y
91	help
92	  Say Y here if you want the pseries core to produce a bunch of
93	  debug messages to the system log. Select this if you are having a
94	  problem with the pseries core and want to see more of what is
95	  going on. This does not enable debugging in lpar.c, which must
96	  be manually done due to its verbosity.
97
98config PPC_SMLPAR
99	bool "Support for shared-memory logical partitions"
100	depends on PPC_PSERIES
101	select LPARCFG
102	help
103	  Select this option to enable shared memory partition support.
104	  With this option a system running in an LPAR can be given more
105	  memory than physically available and will allow firmware to
106	  balance memory across many LPARs.
107
108config CMM
109	tristate "Collaborative memory management"
110	depends on PPC_SMLPAR
111	default y
112	help
113	  Select this option, if you want to enable the kernel interface
114	  to reduce the memory size of the system. This is accomplished
115	  by allocating pages of memory and put them "on hold". This only
116	  makes sense for a system running in an LPAR where the unused pages
117	  will be reused for other LPARs. The interface allows firmware to
118	  balance memory across many LPARs.
119
120config HV_PERF_CTRS
121	bool "Hypervisor supplied PMU events (24x7 & GPCI)"
122	default y
123	depends on PERF_EVENTS && PPC_PSERIES
124	help
125	  Enable access to hypervisor supplied counters in perf. Currently,
126	  this enables code that uses the hcall GetPerfCounterInfo and 24x7
127	  interfaces to retrieve counters. GPCI exists on Power 6 and later
128	  systems. 24x7 is available on Power 8 and later systems.
129
130	  If unsure, select Y.
131
132config IBMVIO
133	depends on PPC_PSERIES
134	bool
135	default y
136
137config IBMEBUS
138	depends on PPC_PSERIES && !CPU_LITTLE_ENDIAN
139	bool "Support for GX bus based adapters"
140	help
141	  Bus device driver for GX bus based adapters.
142
143config PAPR_SCM
144	depends on PPC_PSERIES && MEMORY_HOTPLUG && LIBNVDIMM
145	tristate "Support for the PAPR Storage Class Memory interface"
146	help
147	  Enable access to hypervisor provided storage class memory.
148
149config PPC_SVM
150	bool "Secure virtual machine (SVM) support for POWER"
151	depends on PPC_PSERIES
152	select SWIOTLB
153	select ARCH_HAS_MEM_ENCRYPT
154	select ARCH_HAS_FORCE_DMA_UNENCRYPTED
155	help
156	 There are certain POWER platforms which support secure guests using
157	 the Protected Execution Facility, with the help of an Ultravisor
158	 executing below the hypervisor layer. This enables support for
159	 those guests.
160
161	 If unsure, say "N".
162